Interface‐Engineered All‐Solid‐State Li‐Ion Batteries Based on Garnet‐Type Fast Li+ Conductors

All‐solid‐state Li‐ion batteries based on Li₇La₃Zr₂O₁₂ (LLZO) garnet structures require novel electrode assembly strategies to guarantee a proper Li⁺ transfer at the electrode–electrolyte interfaces. Here, first stable cell performances are reported for Li‐garnet, c‐Li_6.25Al_0.25La₃Zr₂O₁₂, all‐solid‐state batteries running safely with a full ceramics setup, exemplified with the anode material Li₄Ti₅O₁₂. Novel strategies to design an enhanced Li⁺ transfer at the electrode–electrolyte interface using an interface‐engineered all‐solid‐state battery cell based on a porous garnet electrolyte interface structure, in which the electrode material is intimately embedded, are presented. The results presented here show for the first time that all‐solid‐state Li‐ion batteries with LLZO electrolytes can be reversibly charge–discharge cycled also in the low potential ranges (≈1.5 V) for combinations with a ceramic anode material. Through a model experiment, the interface between the electrode and electrolyte constituents is systematically modified revealing that the interface engineering helps to improve delivered capacities and cycling properties of the all‐solid‐state Li‐ion batteries based on garnet‐type cubic LLZO structures.     

Progressive Regulation of Electrical and Thermal Transport Properties to High‐Performance CuInTe2 Thermoelectric Materials

p‐type CuInTe₂ thermoelectric (TE) materials are of great interest for applications in the middle temperature range because of their environmentally benign chemical component and stable phase under operating temperatures. In order to enhance their TE performance to compete with the Pb based TE materials, a progressive regulation of electrical and thermal transport properties has been employed in this work. Anion P and Sb substitution is used to tune the electrical transport properties of CuInTe₂ for the first time, leading to a sharp enhancement in power factor due to the reduction of electrical resistivity by acceptor doping and the increase of the Seebeck coefficient resulted from the improvement of density of states. Concurrently, In₂O₃ nanoinclusions are introduced through an in situ oxidation between CuInTe₂ and ZnO additives, rendering a great reduction in the thermal conductivity of CuInTe₂ by the extra phonon scattering. Then, by integrating the anion substitution and nanoinclusions, a high power factor of 1445 μW m^?1 K^?2 and enhanced ZT of 1.61 at 823 K are achieved in the CuInTe₂ based TE material. This implies that the synergistic regulation of electrical and thermal transport properties by anion substitution and in situ nanostructure is a very effective approach to improve the TE performance of CuInTe₂ compounds.     

Prostaglandin release from rat femurs after implantation of hydroxylapatite and aluminium oxide ceramics

The bony reaction after implantation of uncemented ceramics is of special interest. Therefore porous and dense hydroxylapatite and aluminium oxide ceramics were implanted in rat femurs. One group received no surgical manipulation and another with a sham procedure where no ceramics were implanted served as controls. After 6 and 10 days the rat femurs were harvested and the release of PGE₂ and 6-keto-PGF_1α was measured with specific radioimmunoassays. Decrease in the release of PGE₂ from day 6 to day 10 was present in all three implants. In contrast, 6-keto-PGF_1α increased from day 6 to day 10. Comparing the ceramic types an increase in 6-keto-PGF_1α release was seen in the porous hydroxylapatite group. These prostaglandin (PG) release patterns after ceramic implantation are similar to those of fracture healing, but aluminium oxide seems to be inert, while hydroxylapatite, especially the porous type, stimulates 6-keto-PGF_1α release.     

Development and Performance of MnFeCrO4‐Based Electrodes for Solid Oxide Fuel Cells

Important advances have been made in SOFC development utilizing a ceramic framework based upon yttria zirconia (YSZ) electrolytes supported upon porous YSZ electrode skeletons. This ceramic framework is sintered at high temperatures with subsequent impregnation and low temperature processing of the active electrode materials. Here we seek to develop this impregnated electrode concept by investigating a novel scaffold material similar to the main corrosion product of ferritic stainless steel. The chromium rich spinel (MnFeCrO₄) was used as an electrode support material, either alone or impregnated with (La_0.75Sr_0.25)_0.97Cr_0.5Mn_0.5O_3‐δ, La_0.8Sr_0.2FeO_3‐δ, Ce_0.9Gd_0.1O_2‐δ, CeO₂ and/or Pd. In these initial studies it was found that all of the impregnated phases adhere very well to the spinel and considerably enhance performance and stability to a level sufficient for SOFC applications.     

A Highly Sensitive and Selective Hydrogen Peroxide Biosensor Based on Gold Nanoparticles and Three-Dimensional Porous Carbonized Chicken Eggshell Membrane

A sensitive and noble amperometric horseradish peroxidase (HRP) biosensor is fabricated via the deposition of gold nanoparticles (AuNPs) onto a three-dimensional (3D) porous carbonized chicken eggshell membrane (CESM). Due to the synergistic effects of the unique porous carbon architecture and well-distributed AuNPs, the enzyme-modified electrode shows an excellent electrochemical redox behavior. Compared with bare glass carbon electrode (GCE), the cathodic peak current of the enzymatic electrode increases 12.6 times at a formal potential of −100mV (vs. SCE) and charge-transfer resistance decreases 62.8%. Additionally, the AuNPs-CESM electrode exhibits a good biocompatibility, which effectively retains its bioactivity with a surface coverage of HRP 6.39×10⁻⁹ mol cm⁻² (752 times higher than the theoretical monolayer coverage of HRP). Furthermore, the HRP-AuNPs-CESM-GCE electrode, as a biosensor for H₂O₂ detection, has a good accuracy and high sensitivity with the linear range of 0.01–2.7 mM H₂O₂ and the detection limit of 3μM H₂O₂ (S/N = 3).     

β3 Integrin Promotes TGF-β1/H2O2/HOCl-Mediated Induction of Metastatic Phenotype of Hepatocellular Carcinoma Cells by Enhancing TGF-β1 Signaling

In addition to being an important mediator of migration and invasion of tumor cells, β3 integrin can also enhance TGF-β1 signaling. However, it is not known whether β3 might influence the induction of metastatic phenotype of tumor cells, especially non-metastatic tumor cells which express low level of β3. Here we report that H₂O₂ and HOCl, the reactive oxygen species produced by neutrophils, could cooperate with TGF-β1 to induce metastatic phenotype of non-metastatic hepatocellular carcinoma (HCC) cells. TGF-β1/H₂O₂/HOCl, but not TGF-β1 or H₂O₂/HOCl, induced β3 expression by triggering the enhanced activation of p38 MAPK. Intriguingly, β3 in turn promoted TGF-β1/H₂O₂/HOCl-mediated induction of metastatic phenotype of HCC cells by enhancing TGF-β1 signaling. β3 promoted TGF-β1/H₂O₂/HOCl-induced expression of itself via positive feed-back effect on p38 MAPK activation, and also promoted TGF-β1/H₂O₂/HOCl-induced expression of α3 and SNAI2 by enhancing the activation of ERK pathway, thus resulting in higher invasive capacity of HCC cells. By enhancing MAPK activation, β3 enabled TGF-β1 to augment the promoting effect of H₂O₂/HOCl on anoikis-resistance of HCC cells. TGF-β1/H₂O₂/HOCl-induced metastatic phenotype was sufficient for HCC cells to extravasate from circulation and form metastatic foci in an experimental metastasis model in nude mice. Inhibiting the function of β3 could suppress or abrogate the promoting effects of TGF-β1/H₂O₂/HOCl on invasive capacity, anoikis-resistance, and extravasation of HCC cells. These results suggest that β3 could function as a modulator to promote TGF-β1/H₂O₂/HOCl-mediated induction of metastatic phenotype of non-metastatic tumor cells, and that targeting β3 might be a potential approach in preventing the induction of metastatic phenotype of non-metastatic tumor cells.     

Seasonality and Paleoecology of the Late Cretaceous Multi-Taxa Vertebrate Assemblage of “Lo Hueco” (Central Eastern Spain)

Isotopic studies of multi-taxa terrestrial vertebrate assemblages allow determination of paleoclimatic and paleoecological aspects on account of the different information supplied by each taxon. The late Campanian-early Maastrichtian “Lo Hueco” Fossil-Lagerstätte (central eastern Spain), located at a subtropical paleolatitude of ~31°N, constitutes an ideal setting to carry out this task due to its abundant and diverse vertebrate assemblage. Local δ¹⁸O_PO4 values estimated from δ¹⁸O_PO4 values of theropods, sauropods, crocodyliforms, and turtles are close to δ¹⁸O_H2O values observed at modern subtropical latitudes. Theropod δ¹⁸O_H2O values are lower than those shown by crocodyliforms and turtles, indicating that terrestrial endothermic taxa record δ¹⁸O_H2O values throughout the year, whereas semiaquatic ectothermic taxa δ¹⁸O_H2O values represent local meteoric waters over a shorter time period when conditions are favorable for bioapatite synthesis (warm season). Temperatures calculated by combining theropod, crocodyliform, and turtle δ¹⁸O_H2O values and gar δ¹⁸O_PO4 have enabled us to estimate seasonal variability as the difference between mean annual temperature (MAT, yielded by theropods) and temperature of the warmest months (TWMs, provided by crocodyliforms and turtles). ΔTWMs-MAT value does not point to a significantly different seasonal thermal variability when compared to modern coastal subtropical meteorological stations and Late Cretaceous rudists from eastern Tethys. Bioapatite and bulk organic matter δ¹³C values point to a C₃ environment in the “Lo Hueco” area. The estimated fractionation between sauropod enamel and diet is ~15‰. While waiting for paleoecological information yielded by the ongoing morphological study of the “Lo Hueco” crocodyliforms, δ¹³C and δ¹⁸O_CO3 results point to incorporation of food items with brackish influence, but preferential ingestion of freshwater. “Lo Hueco” turtles showed the lowest δ¹³C and δ¹⁸O_CO3 values of the vertebrate assemblage, likely indicating a diet based on a mixture of aquatic and terrestrial C₃ vegetation and/or invertebrates and ingestion of freshwater.     

An Origin of Cooperative Oxygen Binding of Human Adult Hemoglobin: Different Roles of the α and β Subunits in the α2β2 Tetramer

Human hemoglobin (Hb), which is an α₂β₂ tetramer and binds four O₂ molecules, changes its O₂-affinity from low to high as an increase of bound O₂, that is characterized by ‘cooperativity’. This property is indispensable for its function of O₂ transfer from a lung to tissues and is accounted for in terms of T/R quaternary structure change, assuming the presence of a strain on the Fe-histidine (His) bond in the T state caused by the formation of hydrogen bonds at the subunit interfaces. However, the difference between the α and β subunits has been neglected. To investigate the different roles of the Fe-His(F8) bonds in the α and β subunits, we investigated cavity mutant Hbs in which the Fe-His(F8) in either α or β subunits was replaced by Fe-imidazole and F8-glycine. Thus, in cavity mutant Hbs, the movement of Fe upon O₂-binding is detached from the movement of the F-helix, which is supposed to play a role of communication. Recombinant Hb (rHb)(αH87G), in which only the Fe-His in the α subunits is replaced by Fe-imidazole, showed a biphasic O₂-binding with no cooperativity, indicating the coexistence of two independent hemes with different O₂-affinities. In contrast, rHb(βH92G), in which only the Fe-His in the β subunits is replaced by Fe-imidazole, gave a simple high-affinity O₂-binding curve with no cooperativity. Resonance Raman, ¹H NMR, and near-UV circular dichroism measurements revealed that the quaternary structure change did not occur upon O₂-binding to rHb(αH87G), but it did partially occur with O₂-binding to rHb(βH92G). The quaternary structure of rHb(αH87G) appears to be frozen in T while its tertiary structure is changeable. Thus, the absence of the Fe-His bond in the α subunit inhibits the T to R quaternary structure change upon O₂-binding, but its absence in the β subunit simply enhances the O₂-affinity of α subunit.     

Physical characteristics of bone composite materials

To study the effects of varying mineral content and various trace elements in bone composities on its electrical behavior and possible use in design of transducers, various physical, dielectric, piezoelectric, and electromechanical parameters have been measured. For electrical characterization of various such composites in the high-frequency region (1–108 MHz), variation of impedance (Z), phase angle (tan ), and relative output voltage with frequency has been examined. Furtherfore, the Curie temperature has been determined and the temperature variation of capacitance and loss factor (tan ) studied (24–225°C). Two types of bone composites were prepared and studied. First, powdered collagen and apatite obtained from full bone were mixed intimately in various proportions by weight to prepare eleven bone compositions. Second, such bone materials were made to contain 5–10% various doping foreign additives (A1Br₃, Na₂CO₃, SrCO₃, LiCO₃, Sb₂O₃, ZnO, Nb₂O₅, piezoelectric ceramic (PZT), and Pb(NO₃)₂. It has been observed that a bone composition of 50% collagen + 50% apatite has possible piezoelectric application and other compositions [85% collagen + 15% apatite, 90% collagen + 10% ZnO, and 90% bone + 10% Ba(OH)₂] have a sharp rise in capacitance near the Curie temperature. The Curie temperature is generally shifted towards higher values by additives. It is expected that such results will be relevant in characterizing bone behavior.     

Characterization of the Intestinal Absorption of Seven Flavonoids from the Flowers of Trollius chinensis Using the Caco-2 Cell Monolayer Model

The human Caco-2 cell monolayer model was used to investigate the absorption property, mechanism, and structure-property relationship of seven representative flavonoids, namely, orientin, vitexin, 2”-O-β-L-galactopyranosylorientin, 2”-O-β-L-galactopyranosylvitexin, isoswertisin, isoswertiajaponin, and 2”-O-(2”‘-methylbutanoyl)isoswertisin from the flowers of Trollius chinensis. The results showed that these flavonoids were hardly transported through the Caco-2 cell monolayer. The compounds with 7-OCH₃ including isoswertisin, isoswertiajaponin and 2”-O-(2”‘-methylbutanoyl)isoswertisin were absorbed in a passive diffusion manner, and their absorbability was increased in the same order as their polarity. The absorption of the remaining compounds with 7-OH including orientin, vitexin, 2”-O-β-L-galactopyranosylorientin, and 2”-O-β-L-galactopyranosylvitexin involved transporter mediated efflux in addition to passive diffusion. Among the four compounds with 7-OH, those with a free hydroxyl group at C-2” such as orientin and vitexin were the substrates of P-glycoprotein (P-gp) and that with a free hydroxyl group at C-2’ such as 2”-O-β-L-galactopyranosylorientin was the substrate of multidrug resistance protein 2 (MRP2). The results of this study also implied that the absorbability of the flavonoids should be taken into account when estimating the effective components of T. chinensis.     

Electrical characteristics of sensory neurons of Hirudo medicinalis

During intracellular polarization of identified sensory neurons of the leech by square pulses of hyperpolarizing current electrical parameters of the cell membranes were determined: input resistance of the neuron R_n, time constant of the membrane , the ratio between conductance of the cell processes and conductance of the soma , the resistance of the soma membrane r_s, the input resistance of the axon r _a , capacitance of the membrane C_s, and resistivity of the soma membrane R_s. The results obtained by the study of various types of neurons were subjected to statistical analysis and compared with each other. Significant differences for neurons of N- and T-types were found only between the values of , C_s, and R_s (P<0.01). These parameters also had the lowest coefficients of variation. The surface area of the soma of the neurons, calculated from the capacitance of the membrane (the specific capacitance of the membrane was taken as 1 µF/cm²) was 7–10 times (N-neurons) or 4–6 times (T-neurons) greater than the surface area of a sphere of the same diameter. The resistivity of the soma membrane R_s was 35.00 k·cm² for cells of the N-type and 19.50 k·cm² for T-neurons. The reasons for the relative stability of this parameter compared with the input resistance of the cell (coefficient of variation 22–7 and 53–31% respectively) are discussed. The possible effects of electrical characteristics on the properties of repeated discharges in neurons of different types also are discussed.A. A. Zhdanov Leningrad State University. Translated from Neirofiziologiya, Vol.7, No.3, pp.295–301, May–June, 1975.     

Pronghorn (Antilocapra americana) enamel phosphate δ18O values reflect climate seasonality: Implications for paleoclimate reconstruction

Stable oxygen isotope (δ¹⁸O) compositions from vertebrate tooth enamel are widely used as biogeochemical proxies for paleoclimate. However, the utility of enamel oxygen isotope values for environmental reconstruction varies among species. Herein, we evaluate the use of stable oxygen isotope compositions from pronghorn (Antilocapra americana Gray, 1866) enamel for reconstructing paleoclimate seasonality, an elusive but important parameter for understanding past ecosystems. We serially sampled the lower third molars of recent adult pronghorn from Wyoming for δ¹⁸O in phosphate (δ¹⁸O_PO4) and compared patterns to interpolated and measured yearly variation in environmental waters as well as from sagebrush leaves, lakes, and rivers (δ¹⁸O_w). As expected, the oxygen isotope compositions of phosphate from pronghorn enamel are enriched in ¹⁸O relative to environmental waters. For a more direct comparison, we converted δ¹⁸O_w values into expected δ¹⁸O_PO4* values (δ¹⁸O_W‐_PO4*). Pronghorn δ¹⁸O_PO4 values from tooth enamel record nearly the full amplitude of seasonal variation from Wyoming δ¹⁸O_W‐PO4* values. Furthermore, pronghorn enamel δ¹⁸O_PO4 values are more similar to modeled δ¹⁸O_W‐PO4* values from plant leaf waters than meteoric waters, suggesting that they obtain much of their water from evaporated plant waters. Collectively, our findings establish that seasonality in source water is reliably reflected in pronghorn enamel, providing the basis for exploring changes in the amplitude of seasonality of ancient climates. As a preliminary test, we sampled historical pronghorn specimens (1720 ± 100 AD), which show a mean decrease (a shift to lower values) of 1–2‰ in δ¹⁸O_PO4 compared to the modern specimens. They also exhibit an increase in the δ¹⁸O amplitude, representing an increase in seasonality. We suggest that the cooler mean annual and summer temperatures typical of the 18th century, as well as enhanced periods of drought, drove differences among the modern and historical pronghorn, further establishing pronghorn enamel as excellent sources of paleoclimate proxy data.     

Three Distinct Mechanisms for Translocation and Activation of the δ Subspecies of Protein Kinase C

We expressed δ subspecies of protein kinase C (δ-PKC) fused with green fluorescent protein (GFP) in CHO-K1 cells and observed the movement of this fusion protein in living cells after three different stimulations. The δ-PKC–GFP fusion protein had enzymological characteristics very similar to those of the native δ-PKC and was present throughout the cytoplasm in CHO-K1 cells. ATP at 1 mM caused a transient translocation of δ-PKC–GFP to the plasma membrane approximately 30 s after the stimulation and a sequent retranslocation to the cytoplasm within 3 min. A tumor-promoting phorbol ester, 12-O-tetradecanoylphorbol 13-acetate (TPA; 1 μM), induced a slower translocation of δ-PKC–GFP, and the translocation was unidirectional. Concomitantly, the kinase activity of δ-PKC–GFP was increased by these two stimulations, when the kinase activity of the immunoprecipitated δ-PKC–GFP was measured in vitro in the absence of PKC activators such as phosphatidylserine and diacylglycerol. Hydrogen peroxide (H₂O₂; 5 mM) failed to translocate δ-PKC–GFP but increased its kinase activity more than threefold. δ-PKC–GFP was strongly tyrosine phosphorylated when treated with H₂O₂ but was tyrosine phosphorylated not at all by ATP stimulation and only slightly by TPA treatment. Both TPA and ATP induced the translocation of δ-PKC–GFP even after treatment with H₂O₂. Simultaneous treatment with TPA and H₂O₂ further activated δ-PKC–GFP up to more than fivefold. TPA treatment of cells overexpressing δ-PKC–GFP led to an increase in the number of cells in G₂/M phase and of dikaryons, while stimulation with H₂O₂ increased the number of cells in S phase and induced no significant change in cell morphology. These results indicate that at least three different mechanisms are involved in the translocation and activation of δ-PKC.     

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

Nanosecond Pulsed Laser Deposition (PLD) in the presence of a background gas allows the deposition of metal oxides with tunable morphology, structure, density and stoichiometry by a proper control of the plasma plume expansion dynamics. Such versatility can be exploited to produce nanostructured films from compact and dense to nanoporous characterized by a hierarchical assembly of nano-sized clusters. In particular we describe the detailed methodology to fabricate two types of Al-doped ZnO (AZO) films as transparent electrodes in photovoltaic devices: 1) at low O₂ pressure, compact films with electrical conductivity and optical transparency close to the state of the art transparent conducting oxides (TCO) can be deposited at room temperature, to be compatible with thermally sensitive materials such as polymers used in organic photovoltaics (OPVs); 2) highly light scattering hierarchical structures resembling a forest of nano-trees are produced at higher pressures. Such structures show high Haze factor (>80%) and may be exploited to enhance the light trapping capability. The method here described for AZO films can be applied to other metal oxides relevant for technological applications such as TiO₂, Al₂O₃, WO₃ and Ag₄O₄.     

Foot-and-Mouth Disease Virus Virulent for Cattle Utilizes the Integrin αvβ3 as Its Receptor

Adsorption and plaque formation of foot-and-mouth disease virus (FMDV) serotype A₁₂ are inhibited by antibodies to the integrin α_vβ₃ (A. Berinstein et al., J. Virol. 69:2664–2666, 1995). A human cell line, K562, which does not normally express α_vβ₃ cannot replicate this serotype unless cells are transfected with cDNAs encoding this integrin (K562-α_vβ₃ cells). In contrast, we found that a tissue culture-propagated FMDV, type O₁BFS, was able to replicate in nontransfected K562 cells, and replication was not inhibited by antibodies to the endogenously expressed integrin α₅β₁. A recent report indicating that cell surface heparan sulfate (HS) was required for efficient infection of type O₁ (T. Jackson et al., J. Virol. 70:5282–5287, 1996) led us to examine the role of HS and α_vβ₃ in FMDV infection. We transfected normal CHO cells, which express HS but not α_vβ₃, and two HS-deficient CHO cell lines with cDNAs encoding human α_vβ₃, producing a panel of cells that expressed one or both receptors. In these cells, type A₁₂ replication was dependent on expression of α_vβ₃, whereas type O₁BFS replicated to high titer in normal CHO cells but could not replicate in HS-deficient cells even when they expressed α_vβ₃. We have also analyzed two genetically engineered variants of type O₁Campos, vCRM4, which has greatly reduced virulence in cattle and can bind to heparin-Sepharose columns, and vCRM8, which is highly virulent in cattle and cannot bind to heparin-Sepharose. vCRM4 replicated in wild-type K562 cells and normal, nontransfected CHO (HS⁺ α_vβ_3⁻) cells, whereas vCRM8 replicated only in K562 and CHO cells transfected with α_vβ₃ cDNAs. A similar result was also obtained in assays using a vCRM4 virus with an engineered RGD→KGE mutation. These results indicate that virulent FMDV utilizes the α_vβ₃ integrin as a primary receptor for infection and that adaptation of type O₁ virus to cell culture results in the ability of the virus to utilize HS as a receptor and a concomitant loss of virulence.     

Electrical stimulation of human embryonic stem cells: Cardiac differentiation and the generation of reactive oxygen species

Exogenous electric fields have been implied in cardiac differentiation of mouse embryonic stem cells and the generation of reactive oxygen species (ROS). In this work, we explored the effects of electrical field stimulation on ROS generation and cardiogenesis in embryoid bodies (EBs) derived from human embryonic stem cells (hESC, line H13), using a custom-built electrical stimulation bioreactor. Electrical properties of the bioreactor system were characterized by electrochemical impedance spectroscopy (EIS) and analysis of electrical currents. The effects of the electrode material (stainless steel, titanium-nitride-coated titanium, titanium), length of stimulus (1 and 90 s) and age of EBs at the onset of electrical stimulation (4 and 8 days) were investigated with respect to ROS generation. The amplitude of the applied electrical field was 1 V/mm. The highest rate of ROS generation was observed for stainless steel electrodes, for signal duration of 90 s and for 4-day-old EBs. Notably, comparable ROS generation was achieved by incubation of EBs with 1 nM H₂O₂. Cardiac differentiation in these EBs was evidenced by spontaneous contractions, expression of troponin T and its sarcomeric organization. These results imply that electrical stimulation plays a role in cardiac differentiation of hESCs, through mechanisms associated with the intracellular generation of ROS.     

Concurrently Approaching Volumetric and Specific Capacity Limits of Lithium Battery Cathodes via Conformal Pickering Emulsion Graphene Coatings

To achieve the high energy densities demanded by emerging technologies, lithium battery electrodes need to approach the volumetric and specific capacity limits of their electrochemically active constituents, which requires minimization of the inactive components of the electrode. However, a reduction in the percentage of inactive conductive additives limits charge transport within the battery electrode, which results in compromised electrochemical performance. Here, an electrode design that achieves efficient electron and lithium‐ion transport kinetics at exceptionally low conductive additive levels and industrially relevant active material areal loadings is introduced. Using a scalable Pickering emulsion approach, Ni‐rich LiNi_0.8Co_0.15Al_0.05O₂ (NCA) cathode powders are conformally coated using only 0.5 wt% of solution‐processed graphene, resulting in an electrical conductivity that is comparable to 5 wt% carbon black. Moreover, the conformal graphene coating mitigates degradation at the cathode surface, thus providing improved electrochemical cycle life. The morphology of the electrodes also facilitates rapid lithium‐ion transport kinetics, which provides superlative rate capability. Overall, this electrode design concurrently approaches theoretical volumetric and specific capacity limits without tradeoffs in cycle life, rate capability, or active material areal loading.     

Enhanced Stability of Coated Carbon Electrode for Li‐O2 Batteries and Its Limitations

Li‐O₂ batteries are promising next‐generation energy storage systems because of their exceptionally high energy density (≈3500 W h kg^?1). However, to achieve stable operation, grand challenges remain to be resolved, such as preventing electrolyte decomposition and degradation of carbon, a commonly used air electrode in Li‐O₂ batteries. In this work, using in situ differential electrochemical mass spectrometry, it is demonstrated that the application of a ZnO coating on the carbon electrode can effectively suppress side reactions occurring in the Li‐O₂ battery. By probing the CO₂ evolution during charging of ¹³C‐labeled air electrodes, the major sources of parasitic reactions are precisely identified, which further reveals that the ZnO coating retards the degradation of both the carbon electrode and electrolyte. The successful suppression of the degradation results in a higher oxygen efficiency, leading to enhanced stability for more than 100 cycles. Nevertheless, the degradation of the carbon electrode is not completely prevented by the coating, because the Li₂O₂ discharge product gradually grows at the interface between the ZnO and carbon, which eventually results in detachment of the ZnO particles from the electrode and subsequent deterioration of the performance. This finding implies that surface protection of the carbon electrode is a viable option to enhance the stability of Li‐O₂ batteries; however, fundamental studies on the growth mechanism of the discharge product on the carbon surface are required along with more effective coating strategies.