Control of directionality in the site-specific recombination system of the Streptomyces phage phiC31

The genome of the Streptomyces temperate phage phiC31 integrates into the host chromosome via a recombinase belonging to a novel group of phage integrases related to the resolvase/invertase enzymes. Previously, it was demonstrated that, in an in vitro recombination assay, phiC31 integrase catalyses integration (attP/attB recombination) but not excision (attL/attR). The mechanism responsible for this recombination site selectivity was therefore investigated. Purified integrase was shown to bind with similar apparent binding affinities to between 46 bp and 54 bp of DNA at each of the attachment sites, attP, attB, attL and attR. Assays using recombination sites of 50 bp and 51 bp for attP and attB, respectively, showed that these fragments were functional in attP/attB recombination and maintained strict site selectivity, i.e. no recombination between non-permissive sites, such as attP/attP, attB/attL, etc., was observed. Using bandshifts and supershift assays in which permissive and non-permissive combinations of att sites were used in the presence of integrase, only the attP/attB combination could generate supershifts. Recombination products were isolated from the supershifted complexes. It was concluded that these supershifted complexes contained the recombination synapse and that site specificity, and therefore directionality, is determined at the level of stable synapse formation.     

The FLP recombinase of yeast catalyzes site-specific recombination in the Drosophila genome

We have transferred the site-specific recombination system of the yeast 2 micron plasmid, the FLP recombinase and its recombination targets (FRTs), into the genome of Drosophila. Flies were transformed with an FLP gene under the control of hsp70 regulatory sequences and with a white gene flanked by FRTs. The heat-induced recombinase catalyzes recombination between FRTs, causing loss of white (seen somatically as white patches in the eye) and, less frequently, gain of white (seen as dark-red patches). Loss and gain frequencies vary with the severity of the heat shock, and patterns of mosaicism vary with the developmental stage at which the heat shock is applied. The recombinase is also active in the germline, producing white-eyed and dark-red-eyed progeny.     

Intratypic recombination of polioviruses: evidence for multiple crossing-over sites on the viral genome.

Intratypic recombinant polioviruses were isolated from cells that were coinfected with two temperature-sensitive (ts) mutants of poliovirus type 1, ts035Gr and ts247. After phenotypic characterization of these recombinants, their proteins were studied by polyacrylamide gel electrophoresis, and their genomes were analyzed by RNase T1 fingerprinting and partial nucleotide sequencing. Segregation of specific phenotypic and biochemical characteristics inherited from the parental viruses demonstrated that crossing-over could occur in at least four distinct regions of the genome. Possible mechanisms for recombination are discussed.     

Efficient elimination of selectable marker genes from the plastid genome by the CRE-lox site-specific recombination system

Incorporation of a selectable marker gene during transformation is essential to obtain transformed plastids. However, once transformation is accomplished, having the marker gene becomes undesirable. Here we report on adapting the P1 bacteriophage CRE-lox site-specific recombination system for the elimination of marker genes from the plastid genome. The system was tested by the elimination of a negative selectable marker, codA, which is flanked by two directly oriented lox sites (>codA>). Highly efficient elimination of >codA> was triggered by introduction of a nuclear-encoded plastid-targeted CRE by Agrobacterium transformation or via pollen. Excision of >codA> in tissue culture cells was frequently accompanied by a large deletion of a plastid genome segment which includes the tRNA-ValUAC gene. However, the large deletions were absent when cre was introduced by pollination. Thus pollination is our preferred protocol for the introduction of cre. Removal of the >codA> coding region occurred at a dramatic speed, in striking contrast to the slow and gradual build-up of transgenic copies during plastid transformation. The nuclear cre gene could subsequently be removed by segregation in the seed progeny. The modified CRE-lox system described here will be a highly efficient tool to obtain marker-free transplastomic plants.     

Gene insertion and replacement in Schizosaccharomyces pombe mediated by the Streptomyces bacteriophage phiC31 site-specific recombination system

The site-specific recombination system used by the Streptomyces bacteriophage phiC31 was tested in the fission yeast Schizosaccharomyces pombe. A target strain with the phage attachment site attP inserted at the leu1 locus was co-transformed with one plasmid containing the bacterial attachment site attB linked to a ura4+ marker, and a second plasmid expressing the phiC31 integrase gene. High-efficiency transformation to the Ura+ phenotype occurred when the integrase gene was expressed. Southern analysis revealed that the attB-ura4+ plasmid integrated into the chromosomal attP site. Sequence analysis showed that the attBxattP recombination was precise. In another approach, DNA with a ura4+ marker flanked by two attB sites in direct orientation was used to transform S. pombe cells bearing an attP duplication. The phiC31 integrase catalyzed two reciprocal cross-overs, resulting in a precise gene replacement. The site-specific insertions are stable, as no excision (the reverse reaction) was observed on maintenance of the integrase gene in the integrant lines. The irreversibility of the phiC31 site-specific recombination system sets it apart from other systems currently used in eukaryotic cells, which reverse readily. Deployment of the phiC31 recombination provides new opportunities for directing transgene and chromosome rearrangements in eukaryotic systems.     

Reactions between half- and full-FLP recombination target sites. A model system for analyzing early steps in FLP protein-mediated site-specific recombination.

The FLP recombination target (FRT) can be cut in half so that only one FLP protein binding site is present (a "half site"). FLP protein binds the half sites and joins them into dimeric, asymmetric head-to-head complexes held together chiefly by strong noncovalent interactions. These complexes react with full (normal) FRT sites to generate a variety of products. Analysis of these DNA species reveals that the reaction follows a well-defined reaction pathway that generally parallels the normal reaction pathway. The system is useful in analyzing early steps in recombination, since the identity of the products in a given recombination event unambiguously pinpoints the order in which the cleavage and strand exchange reactions occur. Two conclusions are derived from the present study: (i) Formation of the dimeric head-to-head complex of half sites is a prerequisite to further steps in recombination. (ii) The identity of the base pairs at positions 6 and -6 within the FRT site has a subtle effect in directing the first strand exchange event in the reaction to predominantly one of two possible cleavage sites. In addition, results are presented that suggest that a DNA-DNA pairing intermediate involving only two base pairs of the core sequence is formed prior to the first cleavage and strand exchange. DNA-DNA interactions may therefore not be limited to the isomerization step that follows the first strand exchange.     

The effect of mutations in the Xis-binding sites on site-specific recombination in coliphage HK022

Excisionase (Xis) is an accessory protein that is required for the excision of the related prophages lambda and HK022. Xis binds to two tandemly arranged binding sites (X1 and X2) on the P arm of the recombination sites attP and attR. Gel-retardation analyses and site-specific recombination assays were conducted on derivatives bearing site-directed mutations in the X1 and X2 sites of phage HK022. The results confirm the cooperative binding of Xis to its sites, showing that binding to X1 stimulates further binding to X2. The results also show that mutants affected in a single site are inactive in excision, whereas mutants affected in both sites, which show a complete absence of Xis binding, display significant excision activity. This restored activity is attributed to the interaction of Xis with Integrase, the protein that catalyzes the site-specific recombination reaction.     

A cell-free recombination system for site-specific integration of multigenic shuttle plasmids into the herpes simplex virus type 1 genome.

This report describes a novel method for complementation studies of defective herpes simplex virus (HSV) genes. Viral test gene and nonviral reporter gene cassettes were rapidly integrated into the HSV genome in a site-specific and reversible manner by using the P1 phage-based Cre-lox recombination system. Shuttle plasmids contained a functional loxP recombination site, an expressible form of the bacterial lacZ gene, and a copy of the wild-type glycoprotein B (gB) gene or double mutant gB allele containing both a temperature-sensitive (ts) mutation and a syncytium (syn)-forming mutation. A recipient viral genome, K delta T::lox1, was constructed from the HSV type 1 (syn) gB-deficient mutant virus, K delta T, by marker transfer of the loxP recombination site into the viral thymidine kinase locus. Shuttle plasmids of up to 12.9 kb in length were recombined with high efficiency (11 to 20%) into the K delta T::lox1 genome in cell-free, Cre-mediated recombination reactions. Expression of a functional wild-type or double mutant gB polypeptide complemented the nonfunctional polypeptide expressed from the deleted, normal gB locus and allowed production of either wild-type or Syn- plaques on Vero cells. The latter recombinant virus was also ts for growth. The ability to express viral genes from plasmids which can be shuttled into and out of the HSV genome in cell-free recombination reactions makes this a powerful method for performing genetic studies of the biologic properties of viral gene products.     

Characterization of the binding sites of two proteins involved in the bacteriophage P2 site-specific recombination system.

Integration of the bacteriophage P2 genome into the Escherichia coli host chromosome occurs by site-specific recombination between the phage attP and E. coli attB sites. The phage-encoded 38-kDa protein, integrase, is known to be necessary for both phage integration as well as excision. In order to begin the molecular characterization of this recombination event, we have cloned the int gene and overproduced and partially purified the Int protein and an N-terminal truncated form of Int. Both the wild-type Int protein and the integration host factor (IHF) of E. coli were required to mediate integrative recombination in vitro between a supercoiled attP plasmid and a linear attB substrate. Footprint experiments revealed one Int-protected region on both of the attP arms, each containing direct repeats of the consensus sequence TGTGGACA. The common core sequences at attP and attB were also protected by Int from nuclease digestion, and these contained a different consensus sequence, AA T/A T/A C/A T/G CCC, arranged as inverted repeats at each core. A single IHF-protected site was located on the P (left) arm, placed between the core- and P arm-binding site for Int. Cooperative binding by Int and IHF to the attP region was demonstrated with band-shift assays and footprinting studies. Our data support the existence of two DNA-binding domains on Int, having unrelated sequence specificities. We propose that P2 Int, IHF, attP, and attB assemble in a higher-order complex, or intasome, prior to site-specific integrative recombination analogous to that formed during lambda integration.     

PhiC31 recombination system demonstrates heritable germinal transmission of site-specific excision from the <Emphasis Type="Italic">Arabidopsis</Emphasis> genome

Background  

The large serine recombinase phiC31 from broad host range Streptomyces temperate phage, catalyzes the site-specific recombination of two recognition sites that differ in sequence, typically known as attachment sites attB and attP. Previously, we characterized the phiC31 catalytic activity and modes of action in the fission yeast Schizosaccharomyces pombe.     

The carcinoembryonic antigen (CEA) contains multiple immunoglobulin-like domains

The amino acid sequences of human carcinoembryonic antigen deduced from the cDNA sequences have been analysed. This antigen contains seven extracellular domains (previously recognized three highly repetitive domains are further divided into A and B subdomains each) which are strikingly homologous to each other and to immunoglobulin variable regions, poly-Ig receptor and Thy 1.1. The N-terminal domain lacks immunoglobulin-like fold but the other six domains have, suggesting that the CEA belongs to immunoglobulin superfamily.     

A new site-specific recombinase-mediated system for targeted multiple genomic deletions employing chimeric loxP and mrpS sites

A newly designed site-specific recombination system is presented which allows multiple targeted markerless deletions. The most frequently used tool for removing selection markers or to introduce genes by recombination-mediated cassette exchange is the Cre/loxP system. Many mutant loxP sites have been created for this purpose. However, this study presents a chimeric mutant loxP site denoted mroxP-site. The mroxP site consists of one Cre (loxP/2) and one MrpA (mrpS/2) binding site separated by a palindromic 6-bp spacer sequence. Two mroxP-sites can be recombined by Cre recombinase in head-to-tail as well as in head-to-head orientation. In the head-to-head orientation and the loxP half-sites inside, Cre removes the loxP half-sites during site-specific recombination, creating a new site, mrmrP. The new site is essentially a mrpS site with a palindromic spacer and cannot be used by Cre for recombination anymore. It does, however, present a substrate for the recombinase MrpA. This new system has been successfully applied introducing multiple targeted gene deletions into the Escherichia coli genome. Similar to Cre/loxP and FLP/FRT, this system may be adapted for genetic engineering of other pro- and eukaryotes.     

The R46 site-specific recombination system is a homologue of the Tn3 and gamma delta (Tn1000) cointegrate resolution system

The nucleotide sequence of the R46 site-specific recombination system has been determined. The organization of the recombination gene (perR46) and the site at which it acts (per site), together with the extensive sequence homology displayed with the tnpR genes and res sites of the transposons Tn3 and gamma delta (Tn1000), suggests that they have been derived from a Tn3-like element. These site-specific recombination functions of R46 play a role in plasmid maintenance.     

A site-specific, conservative recombination system carried by bacteriophage P1. Mapping the recombinase gene cin and the cross-over sites cix for the inversion of the C segment.

The bacteriophage P1 genome carries an invertible C segment consisting of 3-kb unique sequences flanked by 0.6-kb inverted repeats. With insertion and deletion mutants of P1 derivatives the site-specific recombinase gene cin for C inversion) has been mapped adjacent to the C segment and the cix sites (for C inversion cross-over) have been located at the outside ends of the inverted repeats. Inversion of the C segment functions as a biological switch and controls expression of the gene(s) responsible for phage infectivity carried on the C segment. The cin gene product can promote recombination between a 'quasi- cix ' site on plasmid pBR322 and a cix site on P1 DNA. The junctions formed on the resulting co-integrate can also serve as cix sites. This observation implies a potential evolutionary process to bring genes under the control of a biological switch acting by DNA inversion.     

How homologous recombination is initiated: unexpected evidence for single-strand nicks from v(d)j site-specific recombination

Views of how homologous recombination is initiated have changed over the past several decades: in the 1960s and 1970s, single-strand DNA lesions (nicks) were the leading contenders, but in the last decade, double-strand DNA breaks (DSBs) have reigned. In this issue of Cell, evidence is presented that nicks can stimulate homologous recombination and, in uncontrolled situations, may lead to translocations and other potentially dangerous genome rearrangements.     

Glycosylation of a Streptomyces coelicolor A3(2) cell envelope protein is required for infection by bacteriophage phi C31

Mutants of Streptomyces coelicolor A3(2) J1929 (Delta pglY) were isolated that were resistant to the Streptomyces temperate phage phi C31. These strains could be transfected with phi C31 DNA, but could not act as infective centres after exposure to phage. Thus, it was concluded that infection was blocked at the adsorption/DNA injection step. The mutants fell into three classes. Class I mutants were complemented by a gene, SCE87.05, isolated from the cosmid library of S. coelicolor A3(2). The product of SCE87.05 had good overall homology to a Mycobacterium tuberculosis hypothetical protein and regions with similarity to dolichol phosphate-D-mannose:protein O-D-mannosyltransferases. Concanavalin A (ConA) inhibited phi C31 infection of S. coelicolor J1929, and this could be partially reversed by the addition of the sugar, alpha-D-methyl-pyranoside. Moreover, glycosylated proteins from J1929, but not from the class I mutant DT1017, were detected using ConA as a probe in Western blots. Class I and II mutants were sensitive to phi C31hc, a previously isolated phage exhibiting an extended host range phenotype, conferred by h. A phage with the same phenotype, phi DT4002, was isolated independently, and a missense mutation was found in a putative tail gene. It is proposed that the phi C31 receptor is a cell wall glycoprotein, and that the phi C31h mutation compensates for the lack of glycosylation of the receptor.     

The expression of Streptomyces and Escherichia coli drug-resistance determinants cloned into the Streptomyces phage phi C31

Lysogens obtained by infecting Streptomyces albus G with a phi C31-pBR322 chimaeric prophage or its delta W12 deletion derivative had increased tetracycline resistance. The ability of the delta W12 derivative to transduce tetracycline resistance was inactivated by inserting a viomycin resistance determinant (vph) into the BamHI site of the pBR322 tet gene, and restored by excising the vph gene. Another deletion mutant (delta W17) of the chimaera, carrying an intact tet gene, was normally unable to transduce tetracycline resistance. This inability was correlated with the finding, by Southern hybridisation analysis, that the att site required for insertion of phi C31 prophage into the host chromosome was located within the delta W17 deletion. Use of phi C31 lysogenic recipient permitted the integration of the att-deleted phage, presumably by homologous recombination, giving tetracycline-resistant double lysogens. This technique was extended to S. coelicolor A3(2) in the detection of derivatives of the att-deleted phage into which a thiostrepton-resistance determinant (tsr) had been inserted in vitro. Phage released from double lysogens were mainly recombinants. One such recombinant is a PstI vector for DNA cloning, able to accommodate up to 6 kb of introduced DNA.