A method for genetic transformation of nonprotoplasted Streptococcus lactis

Plasmid transformation of whole cells of Streptococcus lactis LM0230 was demonstrated. The procedure required polyethylene glycol and incubation in hypertonic media, but did not require enzymatic cell wall digestion. Conditions were optimized, yielding 5 X 10(5) transformants per micrograms of pSA3 DNA. Variables tested for effect on transformation efficiency included molecular weight, concentration, and pH of polyethylene glycol; cell density; plating media; DNA concentration; heat shock; and incubation of cells in hypertonic buffer. DNAs transformed included pSA3, pVA856, pTV1, and c2 phi. Transformation from DNA-DNA ligation mixes, with DNA not purified through density gradients, and with previously frozen cells was also achieved. The method described here for transformation of nonprotoplasted cells of LM0230 is unique, and to date has not been applied successfully to other lactic acid bacteria.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Plasmid transformation of Streptococcus lactis protoplasts: optimization and use in molecular cloning.

The parameters affecting polyethylene glycol-induced plasmid transformation of Streptococcus lactis LM0230 protoplasts were examined to increase the transformation frequency. In contrast to spreading protoplasts over the surface of an agar medium, their incorporation into soft agar overlays enhanced regeneration of protoplasts and eliminated variability in transformation frequencies. Polyethylene glycol with a molecular weight of 3,350 at a final concentration of 22.5% yielded optimal transformation. A 20-min polyethylene glycol treatment of protoplasts in the presence of DNA was necessary for maximal transformation. The number of transformants recovered increased as the protoplast and DNA concentration increased over a range of 3.0 X 10(6) to 3.0 X 10(8) protoplasts and 0.25 to 4.0 micrograms of DNA per assay, respectively. With these parameters, transformation was increased to 5 X 10(3) to 4 X 10(4) transformants per microgram of DNA. Linear and recombinant plasmid DNA transformed, but at frequencies 10- to 100-fold lower than that of covalently closed circular DNA. Transformation of recombinant DNA molecules enabled the cloning of restriction endonuclease fragments coding for lactose metabolism into S. lactis LM0230 with the Streptococcus sanguis cloning vector, pGB301. These results demonstrated that the transformation frequency is sufficient to clone plasmid-coded genes which should prove useful for strain improvement of dairy starter cultures.     

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.     

Genetic transformation of intact Lactococcus lactis subsp. lactis by high-voltage electroporation.

To apply recombinant DNA techniques for genetic manipulation of the industrially important lactococci, an efficient and reliable high-frequency transformation system must be available. High-voltage electric pulses have been demonstrated to enhance uptake of DNA into protoplasts and intact cells of numerous gram-negative and gram-positive microorganisms. The objective of this study was to develop a system for electroporating intact cells of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) with a commercially available electroporation unit (BTX Transfector 100; BTX, Inc., San Diego, Calif.). Parameters which influenced the efficiency of transformation included growth phase and final concentration of cells, ionic strength of the suspending medium, concentration of plasmid DNA, and the amplitude and duration of the pulse. Washed suspensions of intact cells suspended in deionized distilled water were subjected to one high-voltage electric pulse varying in voltage (300 to 900 V corresponding to field strengths of 5 to 17 kV/cm) and duration (100 microseconds to 1 s). Transformation efficiencies of 10(3) transformants per microgram of DNA were obtained when dense suspensions (final concentration, 5 x 10(10) CFU/ml) of stationary-phase cells were subjected to one pulse with a peak voltage of 900 V (field strength, 17 kV/cm) and a pulse duration of 5 ms in the presence of plasmid DNA. Dilution of porated cells in broth medium followed by an expression period of 2 h at 30 degrees C was beneficial in enhancing transformation efficiencies. Plasmids ranging in size from 9.8 to 30.0 kilobase pairs could be transformed by this procedure.     

Improved electroporation efficiency of intact Lactococcus lactis subsp. lactis cells grown in defined media

The impact of growth conditions on electroporation of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) was evaluated. Cells grown in M17 broth supplemented with 0.5% glucose (M17-Glu) and two chemically defined synthetic media, FMC and RPMI 1640, all supplemented with 0.24% DL-threonine or 0.5% glycine, were harvested, washed with double-distilled water, diluted, and porated in the presence of 1 microgram of pGB301 DNA with a Transfector 100 (BTX, Inc., San Diego, Calif.) or a Gene Pulser (Bio-Rad Laboratories, Richmond, Calif.). Transformants were recovered at consistently higher efficiencies for cells grown in FMC or RPMI 1640 (10(3) to 10(4) transformants per micrograms of DNA) than for cells grown in M17-Glu (10(1) to 10(2) transformants per micrograms of DNA). Other parameters influencing electroporation of L. lactis cells grown in chemically defined media were growth phase and final concentration of cells, concentration of plasmid DNA, voltage achieved during poration, and expression conditions. A high degree of variability in transformation efficiencies was evident for replicate samples of cells pulsed with either electroporation machine. A trend toward decreased variability was observed for duplicate samples of cells prepared on the same day. In addition, storage studies done with a large batch of cells prepared on the same day indicated that freezing dry cell pellets at -60 degrees C had no deleterious effect on transformation efficiencies over a 30-day period when a new 0.2-cm cuvette was used for porating each sample.     

Improved electroporation efficiency of intact Lactococcus lactis subsp. lactis cells grown in defined media.

The impact of growth conditions on electroporation of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) was evaluated. Cells grown in M17 broth supplemented with 0.5% glucose (M17-Glu) and two chemically defined synthetic media, FMC and RPMI 1640, all supplemented with 0.24% DL-threonine or 0.5% glycine, were harvested, washed with double-distilled water, diluted, and porated in the presence of 1 microgram of pGB301 DNA with a Transfector 100 (BTX, Inc., San Diego, Calif.) or a Gene Pulser (Bio-Rad Laboratories, Richmond, Calif.). Transformants were recovered at consistently higher efficiencies for cells grown in FMC or RPMI 1640 (10(3) to 10(4) transformants per micrograms of DNA) than for cells grown in M17-Glu (10(1) to 10(2) transformants per micrograms of DNA). Other parameters influencing electroporation of L. lactis cells grown in chemically defined media were growth phase and final concentration of cells, concentration of plasmid DNA, voltage achieved during poration, and expression conditions. A high degree of variability in transformation efficiencies was evident for replicate samples of cells pulsed with either electroporation machine. A trend toward decreased variability was observed for duplicate samples of cells prepared on the same day. In addition, storage studies done with a large batch of cells prepared on the same day indicated that freezing dry cell pellets at -60 degrees C had no deleterious effect on transformation efficiencies over a 30-day period when a new 0.2-cm cuvette was used for porating each sample.     

A Simple and Rapid Method for Genetic Transformation of Lactic Streptococci by Electroporation

An electroporation procedure for the plasmid-mediated genetic transformation of intact cells of Streptococcus cremoris and Streptococcus lactis was performed. Ten different strains were transformed. The method was simple and rapid and yielded transformant colonies in 14 to 24 h. The method was optimized for S. lactis LM0230, and transformation frequencies of between 1 × 10⁴ and 5 × 10⁵ transformants per μg of purified plasmid (pMU1328) were achieved routinely. The optimized procedure involved lysozyme treatment of cells. Transformation of LM0230 occurred at comparable frequencies with pLS1 (4.4 kilobase pair [kbp]), pMU1328 (7.4 kbp), and pAMβ1 (26.5 kbp). Plasmid DNA isolated from transformants had not undergone detectable deletions or rearrangements. Transformation was possible with plasmid DNA which was religated after restriction endonuclease digestion. Phage DNA-dependent transfection of S. lactis LM0230 and S. lactis C6 was also achieved.     

Replication and temperature-sensitive maintenance functions of lactose plasmid pSK11L from Lactococcus lactis subsp. cremoris.

The replication region of pSK11L, the lactose plasmid of Lactococcus lactis subsp. cremoris (L. cremoris) SK11, was isolated on a 14.8-kbp PvuII fragment by shotgun cloning into an Escherichia coli vector encoding erythromycin resistance and selection for erythromycin-resistant transformants of L. lactis subsp. lactis (L. lactis) LM0230. Deletion analysis and Tn5 mutagenesis of the resulting plasmid (pKMP1) further localized the replication region to a 2.3-kbp ScaI-SpeI fragment. DNA sequence analysis of this 2.3-kbp fragment revealed a 1,155-bp open reading frame encoding the putative replication protein, Rep. The replication origin was located upstream of rep and consisted of an 11-bp imperfect direct repeat and a 22-bp sequence tandemly repeated three and one-half times. The overall organization of the pSK11L replicon was remarkably similar to that of pCI305, suggesting that pSK11L does not replicate by the rolling-circle mechanism. Like pSK11L, pKMP1 was unstable in L. lactis LM0230. Deletion analysis allowed identification of several regions which appeared to contribute to the maintenance of pKMP1 in L. lactis LM0230. pKMP1 was significantly more stable in L. cremoris EB5 than in L. lactis LM0230 at all of the temperatures compared. This stability was lost by deletion of a 3.1-kbp PvuII-XbaI fragment which had no effect on stability in L. lactis LM0230. Other regions affecting stability in L. cremoris EB5 but not in L. lactis LM0230 were also identified. Stability assays conducted at various temperatures showed that pKMP1 maintenance was temperature sensitive in both L. lactis LM0230 and L. cremoris EB5, although the plasmid was more unstable in L. lactis LM0230. The region responsible for the temperature sensitivity phenotype in L. lactis LM0230 was tentatively localized to a 1.2-kbp ClaI-HindIII fragment which was distinct from the replication region of pSK11L. Our results suggest that the closely related L. lactis and L. cremoris subspecies behave differently regarding maintenance of plasmids.     

Transformation of Zymomonas mobilis with Plasmid DNA

A method for the transformation of Zymomonas mobilis with plasmid DNA was developed by using shuttle vectors, pZA31, pZA32 and pZA33, as a source of transforming DNA. Partial spheroplasts of Z. mobilis were prepared by growing cells in a hypertonic medium supplemented with a drug which inhibits the biosynthesis of bacterial cell walls, such as penicillin G and d-cycloserine. They were transformed with plasmid DNA in the presence of 15% polyethylene glycol 6,000, after treated with 100 mm CaCl₂. The frequency of transformation obtained was 10⁴ to 10⁵ transformants/μg of DNA for Z. mobilis IFO13756 (Z-6).     

Genetic transformation of Rhodopseudomonas sphaeroides by plasmid DNA.

A broad-host-range cloning vector, pUI81, was constructed in vitro from plasmids RSF1010 and pSL25 (a pBR322 derivative) and used to assay for transformation in Rhodopseudomonas sphaeroides. Washing cells with 500 mM Tris was an effective means of inducing competence for DNA uptake. Transformation frequencies as high as 10(-5) (transformants per viable cell) have been achieved by incubating Tris-treated cells with plasmid DNA, 100 mM CaCl2, and 20% polyethylene glycol 6000. Maximum frequencies were obtained when recipient cells were spread onto selective media after a 6.5-h outgrowth period in antibiotic-free medium. The structure (open circular versus closed, covalent circular), size, and concentration of plasmid DNA all significantly affected the transformation frequency. Four different plasmids, all small and suitable as cloning vectors, have been introduced by transformation into several different R. sphaeroides strains. Recombinant DNA carried on small, nonconjugative plasmids with broad host ranges can now be directly transferred to R. sphaeroides by this method.     

AbiQ, an Abortive Infection Mechanism from Lactococcus lactis

Lactococcus lactis W-37 is highly resistant to phage infection. The cryptic plasmids from this strain were coelectroporated, along with the shuttle vector pSA3, into the plasmid-free host L. lactis LM0230. In addition to pSA3, erythromycin- and phage-resistant isolates carried pSRQ900, an 11-kb plasmid from L. lactis W-37. This plasmid made the host bacteria highly resistant (efficiency of plaquing <10⁻⁸) to c2- and 936-like phages. pSRQ900 did not confer any resistance to phages of the P335 species. Adsorption, cell survival, and endonucleolytic activity assays showed that pSRQ900 encodes an abortive infection mechanism. The phage resistance mechanism is limited to a 2.2-kb EcoRV/BclI fragment. Sequence analysis of this fragment revealed a complete open reading frame (abiQ), which encodes a putative protein of 183 amino acids. A frameshift mutation within abiQ completely abolished the resistant phenotype. The predicted peptide has a high content of positively charged residues (pI = 10.5) and is, in all likelihood, a cytosolic protein. AbiQ has no homology to known or deduced proteins in the databases. DNA replication assays showed that phage c21 (c2-like) and phage p2 (936-like) can still replicate in cells harboring AbiQ. However, phage DNA accumulated in its concatenated form in the infected AbiQ⁺ cells, whereas the AbiQ⁻ cells contained processed (mature) phage DNA in addition to the concatenated form. The production of the major capsid protein of phage c21 was not hindered in the cells harboring AbiQ.     

Conjugative mobilization as an alternative vector delivery system for lactic streptococci.

Due to the current variability in applying polyethylene glycol-mediated protoplast transformation to lactic streptococci, a study was undertaken to assess the feasibility of conjugative mobilization as an alternative method for vector delivery. By using the broad-host-range conjugative plasmid pVA797, the partially homologous cloning vector pVA838 was successfully introduced into various strains of Streptococcus lactis, Streptococcus cremoris, Streptococcus lactis subsp. diacetylactis, Streptococcus thermophilus, and Streptococcus faecalis. Frequencies ranged from 10(-2) to 10(-6) transconjugants per recipient. Both pVA797 and pVA838 were acquired intact, without alteration in functionality. Also, the shuttle vector pSA3, which shares partial homology with pVA797, was mobilized via conjugation. The use of S. lactis LM2301 as the intermediate donor allowed the use of physiologic and metabolic characteristics for recipient differentiation. The construction of a vector containing a "DNA cassette" conferring mobilization and the resolution, segregation, and stability of the cointegrates, pVA797, pVA838, and pSA3, are also reported.     

Conjugative mobilization as an alternative vector delivery system for lactic streptococci

Due to the current variability in applying polyethylene glycol-mediated protoplast transformation to lactic streptococci, a study was undertaken to assess the feasibility of conjugative mobilization as an alternative method for vector delivery. By using the broad-host-range conjugative plasmid pVA797, the partially homologous cloning vector pVA838 was successfully introduced into various strains of Streptococcus lactis, Streptococcus cremoris, Streptococcus lactis subsp. diacetylactis, Streptococcus thermophilus, and Streptococcus faecalis. Frequencies ranged from 10(-2) to 10(-6) transconjugants per recipient. Both pVA797 and pVA838 were acquired intact, without alteration in functionality. Also, the shuttle vector pSA3, which shares partial homology with pVA797, was mobilized via conjugation. The use of S. lactis LM2301 as the intermediate donor allowed the use of physiologic and metabolic characteristics for recipient differentiation. The construction of a vector containing a "DNA cassette" conferring mobilization and the resolution, segregation, and stability of the cointegrates, pVA797, pVA838, and pSA3, are also reported.     

Conjugal Transfer of Genetic Information in Group N Streptococci

Streptococcus lactis strains ML3 and C₂O and S. lactis subsp. diacetylactis strains DRC3, 11007, and WM₄ were found to transfer lactose-fermenting ability to LM0230, an S. lactis C2 lactose-negative (Lac⁻) derivative which is devoid of plasmid deoxyribonucleic acid (DNA). Lactose-positive streptomycin-resistant (Lac⁺ Str^r) recombinants were found when the Lac⁺ Str^s donor was mixed with Lac⁻ Str^r LM0230 in solid-surface matings. Transduction and transformation were ruled out as the mechanism of genetic exchange in strains ML3, DRC3, 11007, and WM₄, nor was reversion responsible for the high number of Lac⁺ Str^r recombinants. Furthermore, chloroform treatment of the donor prevented the appearance of recombinants, indicating that transfer of lactose-fermenting ability required viable cell-to-cell contact. Strain C₂O demonstrated transduction as well as conjugation. Transfer of plasmid DNA during conjugation for all strains was confirmed by demonstrating the presence of plasmid DNA in the transconjugants by using agarose gel electrophoresis. In some instances, a cryptic plasmid was transferred in conjunction with the lactose plasmid by using strains DRC3, 11007, and WM₄. In S. lactis C2 × LM0230 matings, the Str^r marker was transferred from LM0230 to C2, suggesting conjugal transfer of chromosomal DNA. The results confirm conjugation as another mechanism of genetic exchange occurring in dairy starter cultures.     

Hypertonic sucrose inhibition of endocytic transport suggests multiple early endocytic compartments

Incubation of animal cells with hypertonic sucrose and polyethylene glycol (PEG) 1,000 renders endosomes sensitive in situ to hypotonic shock (Okada and Rechsteiner, 1982). We found that: 1) in vitro endosomes were osmotically insensitive; and 2) hypertonic sucrose inhibited transport from very early endosomes to lysosomes. Endocytic vesicles were labeled by incubating Chinese hamster ovary (CHO) cells for 1-10 min at 37 degrees C with horseradish peroxidase (HRP) and/or fluorescein isothiocyanate-conjugated dextran (FITC-dextran). Cell fractions prepared in 0.25 M sucrose were hypotonically shocked by dilution with 5 mM Na phosphate buffer, pH 6.7, to a final sucrose concentration of 0.05 M. After hypotonic shock, endocytized HRP and FITC-dextran pelleted with membrane while lysosomal hydrolases did not. The HRP activity in the pellet was latent, suggesting that endosomes were resistant to osmotic shock. Uptake in the presence of hypertonic sucrose had little effect on the subsequent osmotic sensitivity of the endosomes. Uptake in the presence of hypertonic sucrose and PEG 1,000 rendered endosomes fragile to cell homogenization. Unexpectedly, the inclusion of hypertonic sucrose in the uptake and chase media inhibited the appearance of HRP in lysosomes. HRP internalized during a 10-min uptake appeared as if it were present in two physically distinct compartments, one accessible to transport inhibition by exogenous sucrose ("very early" endosomes) and the other not ("early" endosomes). After a brief uptake (1-3 min), postincubation of CHO cells in 0.25 M sucrose-containing media completely blocked transport of internalized HRP to lysosomes. This blockage could be partially relieved by cointernalization of invertase with HRP. These results suggest that transport between multiple early endosome populations is sensitive to intraorganellar osmotic conditions.     

Transfection of Lactobacillus bulgaricus protoplasts by bacteriophage DNA

A protoplast transfection system has been developed for Lactobacillus bulgaricus. The procedure involves a polyethylene glycol-mediated fusion of bacteriophage DNA encapsulated in liposomes into mutanolysin-treated cells. With L. bulgaricus B004 and DNA isolated from the phage phi c5004, transfection reached a maximum when at least 95% of the cells were osmotically fragile. The incorporation of phage DNA into liposomes was essential; no transfectants were detected in the absence of liposomes. The largest number of transfectants was observed after longer periods (20 min) of fusion of mutanolysin-treated cells and liposomes with polyethylene glycol. The maximum efficiency of 5 x 10(7) PFU/microgram of DNA was reached after a 24-h incubation in growth media prior to plating transfected cells in an agar overlay to detect the appearance of plaques. A minimum of 4 h of incubation in growth medium after fusion was required to detect the production and release of virions. The possibility that the high frequencies observed were due to bursting of transfected cells and subsequent infection of additional cells was found not to be a factor. The number of transfectants observed was directly proportional to the quantity of DNA added. These results define conditions appropriate for the introduction of DNA into L. bulgaricus.     

Transfection of Lactobacillus bulgaricus protoplasts by bacteriophage DNA.

A protoplast transfection system has been developed for Lactobacillus bulgaricus. The procedure involves a polyethylene glycol-mediated fusion of bacteriophage DNA encapsulated in liposomes into mutanolysin-treated cells. With L. bulgaricus B004 and DNA isolated from the phage phi c5004, transfection reached a maximum when at least 95% of the cells were osmotically fragile. The incorporation of phage DNA into liposomes was essential; no transfectants were detected in the absence of liposomes. The largest number of transfectants was observed after longer periods (20 min) of fusion of mutanolysin-treated cells and liposomes with polyethylene glycol. The maximum efficiency of 5 x 10(7) PFU/microgram of DNA was reached after a 24-h incubation in growth media prior to plating transfected cells in an agar overlay to detect the appearance of plaques. A minimum of 4 h of incubation in growth medium after fusion was required to detect the production and release of virions. The possibility that the high frequencies observed were due to bursting of transfected cells and subsequent infection of additional cells was found not to be a factor. The number of transfectants observed was directly proportional to the quantity of DNA added. These results define conditions appropriate for the introduction of DNA into L. bulgaricus.     

Genetic transformation of rifampicin resistance in Lactobacillus acidophilus

Lactobacillus acidophilus strain 100-33, originally isolated from swine faeces, was transformed to rifampicin resistance with DNA from spontaneous rifampicin-resistant mutants derived from it. Cells of the recipient strain were treated with lysozyme and mutanolysin, mixed with donor DNA and polyethylene glycol and grown on a regeneration medium overnight. After 48 h incubation, the numbers of rifampicin-resistant cells in the populations of regenerated cells were estimated from numbers of colonies. Efficiency of the lysozyme/mutanolysin treatment (the ratio of the number of osmotically fragile cells after the enzyme treatment to the initial cell number) was about 99%. The regeneration frequency of the enzyme-treated cells varied from 5 to 67%. The transformation frequency varied from about 0.2 X 10(-8) to 8.0 X 10(-8) transformants per regenerated cell per microgram DNA. To our knowledge, this method for genetic transformation is the first to be reported for a Lactobacillus strain.     

Simplified procedure for transient transformation of plant protoplasts using polyethylene glycol treatment

A modification of the polyethylene glycol-mediated transformation procedure which eliminates the manual polyethylene glycol dilution step is presented. A transformation mixture of protoplasts, DNA and polyethylene glycol was plated directly onto agarose blocks after incubation. The procedure was simple and fast, thereby suitable for screening the gene activity of large numbers of plasmid constructions. It has been tested for both maize and rice protoplasts.