Electrochemical behavior and detection of hepatitis B virus DNA PCR production at gold electrode

Sequence-known short-stranded hepatitis B virus (HBV) DNA fragment (181 bps) was obtained by PCR method. The strategy for its electrochemical detection was designed by covalently immobilizing single-stranded HBV DNA on gold electrode surface via carboxylate ester as a linkage between 3′-hydroxy end of DNA and carboxyl group of thioglycolic acid (TGA) self-assembled monolayer. The hybridization reaction on surface was evidenced by electrochemical methods using ferrocenium hexafluorophosphate (FcPF₆) as an electroactive indicator. The interactions of Fc⁺ with single-stranded (ss) and double-stranded (ds) HBV DNA immobilized on TGA monolayer were studied. The difference between the responses of Fc⁺ at ss- and ds-DNA/Au electrodes suggested that this hybridization biosensor could be conveniently used to monitor DNA hybridization with a high sensitivity. AC impedance and XPS techniques have been employed to characterize the immobilization of ss-DNA on the gold surface.     

Electrochemical DNA biosensor for bovine papillomavirus detection using polymeric film on screen-printed electrode

A new electrochemical DNA biosensor for bovine papillomavirus (BPV) detection that was based on screen-printed electrodes was comprehensively studied by electrochemical methods of cyclic voltammetry (CV) and differential pulse voltammetry (DPV). A BPV probe was immobilised on a working electrode (gold) modified with a polymeric film of poly-L-lysine (PLL) and chitosan. The experimental design was carried out to evaluate the influence of polymers, probe concentration (BPV probe) and immobilisation time on the electrochemical reduction of methylene blue (MB). The polymer poly-L-lysine (PLL), a probe concentration of 1μM and an immobilisation time of 60min showed the best result for the BPV probe immobilisation. With the hybridisation of a complementary target sequence (BPV target), the electrochemical signal decreased compared to a BPV probe immobilised on the modified PLL-gold electrode. Viral DNA that was extracted from cattle with papillomatosis also showed a decrease in the MB electrochemical reduction, which suggested that the decreased electrochemical signal corresponded to a bovine papillomavirus infection. The hybridisation specificity experiments further indicated that the biosensor could discriminate the complementary sequence from the non-complementary sequence. Thus, the results showed that the development of analytical devices, such as a biosensor, could assist in the rapid and efficient detection of bovine papillomavirus DNA and help in the prevention and treatment of papillomatosis in cattle.     

Gold nanoparticle-based colorimetric detection of kanamycin using a DNA aptamer

A selective kanamycin-binding single-strand DNA (ssDNA) aptamer (TGGGGGTTGAGGCTAAGCCGA) was discovered through in vitro selection using affinity chromatography with kanamycin-immobilized sepharose beads. The selected aptamer has a high affinity for kanamycin and also for kanamycin derivatives such as kanamycin B and tobramycin. The dissociation constants (K_d [kanamycin] = 78.8 nM, K_d [kanamycin B] = 84.5 nM, and K_d [tobramycin] = 103 nM) of the new aptamer were determined by fluorescence intensity analysis using 5′-fluorescein amidite (FAM) modification. Using this aptamer, kanamycin was detected down to 25 nM by the gold nanoparticle-based colorimetric method. Because the designed colorimetric method is simple, easy, and visible to the naked eye, it has advantages that make it useful for the detection of kanamycin. Furthermore, the selected new aptamer has many potential applications as a bioprobe for the detection of kanamycin, kanamycin B, and tobramycin in pharmaceutical preparations and food products.     

Electrochemical detection of short sequences of hepatitis C 3a virus using a peptide nucleic acid-assembled gold electrode

Development of an electrochemical DNA biosensor, using a gold electrode modified with a self-assembled monolayer composed of a peptide nucleic acid (PNA) probe and 6-mercapto-1-hexanol, is described. The sensor relies on covalent attachment of the14-mer PNA probe related to the hepatitis C virus genotype 3a (pHCV3a) core/E1 region on the electrode. Covalently self-assembled PNA could selectively hybridize with a complementary sequence in solution to form double-stranded PNA-DNA on the surface. The increase of peak current of methylene blue (MB), upon hybridization of the self-assembled probe with the target DNA in the solution, was observed and used to detect the target DNA sequence. Some hybridization experiments with noncomplementary oligonucleotides were carried out to assess whether the suggested DNA sensor responds selectively to the target. Diagnostic performance of the biosensor is described and the detection limit was found to be 5.7 × 10⁻¹¹ M with a relative standard deviation of 1.4% in phosphate buffer solution, pH 7.0. This sensor exhibits high reproducibility and could be used for detection of the target DNA for seven times after the regeneration process.     

Electrochemical impedance detection of DNA hybridization based on dendrimer modified electrode

Bioactive ultrathin films with the incorporation of amino-terminated G4 PAMAM dendrimers have been prepared via layer-by-layer self-assembly methods on a gold electrode and used for the DNA hybridization analysis. Surface plasmon resonance (SPR), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) are used to characterize the successful construction of the multicomponent film on the gold substrate. The dendrimer-modified surfaces improve the immobilization capacity of the probe DNA greatly, compared to the AET (2-aminoethanethiol) SAM sensor surfaces without dendrimer molecules. DNA hybridization analysis is monitored by EIS. The dendrimer-based electrochemical impedance DNA biosensor shows high sensitivity and selectivity for DNA hybridization assay. The multicomponent films also display a high stability during repeated regeneration and hybridization cycles.     

Electrochemical synthesis of gold nanostructure modified electrode and its development in electrochemical DNA biosensor

In this article, gold nanostructure modified electrodes were achieved by a simple one-step electrodeposition method. The morphologies of modified electrodes could be easily controlled by changing the pH of HAuCl₄ solution. The novel nanoflower-like particles with the nanoplates as the building blocks could be interestingly obtained at pH 5.0. The gold nanoflower modified electrodes were then used for the fabrication of electrochemical DNA biosensor. The DNA biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy with the use of ferricyanide as an electrochemical redox indicator. The DNA immobilization and hybridization on gold nanoflower modified electrode was studied with the use of [Ru(NH₃)₆]³⁺ as a hybridization indicator. The electrochemical DNA biosensor shows a good selectivity and sensitivity toward the detection of target DNA. A detection limit of 1 pM toward target DNA could be obtained.     

Electrochemical detection of mismatched DNA using a MutS probe

A direct and label-free electrochemical biosensor for the detection of the protein–mismatched DNA interaction was designed using immobilized N-terminal histidine tagged Escherichia coli. MutS on a Ni-NTA coated Au electrode. General electrochemical methods, cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM) and impedance spectroscopy, were used to ascertain the binding affinity of mismatched DNAs to the MutS probe. The direct results of CV and impedance clearly reveal that the interaction of MutS with the CC heteroduplex was much stronger than that with AT homoduplex, which was not differentiated in previous results (GT > CT > CC ≈ AT) of a gel mobility shift assay. The EQCM technique was also able to quantitatively analyze MutS affinity to heteroduplexes.     

Electrochemical mutagen screening using microbial chip

Electrochemical microbial chip for mutagen screening were microfabricated and characterized by scanning electrochemical microscopy (SECM). Salmonella typhimurium TA1535 with a plasmid pSK1002 carrying a umuC'-'lacZ fusion gene was used for the whole cell mutagen sensor. The TA1535/pSK1002 cells were exposed to mutagen solutions containing 2-(2-furyl)-3-(5-nitro-2-furyl)acrylamido (AF-2), mitomycin C (MMC) or 2-aminoanthracene (2-AA) and embedded in a microcavity (5nl) on a glass substrate using collagen gel. The beta-galactosidase expression on the microbial chip was electrochemically monitored using p-aminophenyl-beta-d-galactopyranoside (PAPG) as the enzymatic substrate. This system has several advantages compared with the conventional umu test: drastic reduction of the sample volume, less time-consuming for beta-galactosidase detection (free from substrate reaction time) and lower detection limit for the three mutagens (AF-2, MMC, 2-AA). Finally, a multi-sample assay was carried out using the microbial array chip with four microcavities.     

Electrochemical study of the interaction between cytochrome c and DNA at a modified gold electrode

The direct electron transfer of surface-confined horse heart cytochrome c (Cyt c) was achieved using COOH-terminated alkanethiolate-modified gold electrode. Later DNA was immobilized on the two-layer modified electrode. The quantitative determination of DNA was explored and the interaction between cytochrome c and DNA was studied. The binding site sizes were determined to be 15 bp per Cyt c molecule with double-stranded (ds) DNA and 30 nucleotides binding one Cyt c molecule with single-stranded (ss) DNA. At the dsDNA/Cyt c/MUA/Au electrode, the rate constant of oxidation electron transfer k(s,ox)=1.59x10(-3)cms-1 was obtained, at the ssDNA/Cyt c/MUA/Au electrode, the value was 2.43x10(-3)ms-1 when the scan rate was 1.0V/s. The different electrodes were characterized with electrochemical quartz crystal microbalance and atomic force microscope.     

Voltammetric detection of trimethylamine using immobilized trimethylamine dehydrogenase on an electrodeposited goldnanoparticle electrode

A voltammetric enzyme electrode was developed based on nicotinamide-independent trimethylamine dehydrogenase (TMADH, EC 1.5.99.7), which catalyses the oxidation of trimethylamine (TMA) to dimethylamine and formaldehyde. A quaternized osmium hydrogel polymer, poly(vinylimidazole-[Os(4,4′-dimethyl-2,2′-bipyridine)₂Cl]^+/2+) with ethylamine (PVI-Os-EA), was prepared as a potential redox mediator in an electrochemical biosensor. TMA was detected using TMADH that was co-immobilized with an osmium hydrogel polymer on electrodeposited gold nanoparticles (Au-NPs) on screen-printed carbon electrodes (SPCEs). The Au-NPs deposited onto SPCEs provided about a three times higher electrochemical response compared to that of a planar gold electrode. As TMA was catalyzed by wired TMADH, the electrical signal was monitored at 0.3 V versus Ag/AgCl by cyclic voltammetry and chronoamperometry. The anode currents increased linearly in proportion to the TMA concentration over the 0 ∼ 2.5 mM range with a detection limit of 1 μM (R = 0.9972).     

Electrochemical assay of plasminogen activators in plasma using polyion-sensitive membrane electrode detection

Two relatively simple electrochemical assay methods suitable for the measurement of plasminogen activators (including urokinase (u-PA), streptokinase (SK), and tissue plasminogen activator (t-PA)) in plasma samples are described. In one approach, the initial rate of decrease in the potentiometric response of a polycation-sensitive membrane electrode toward protamine is monitored after addition of a preincubated reaction mixture containing the sample and exogenous plasminogen. The plasmin formed from plasminogen by the activators catalyzes the decomposition of the arginine-rich protamine substrate, yielding smaller polycationic fragments that are not sensed by the electrode. Alternately, the sample, plasminogen, and protamine can be incubated together, and the remaining protamine in this reaction mixture can be measured at a fixed point in time by placing the electrode into the mixture and recording the electromotive force response. Working curves found with both methods for plasma samples spiked with varying levels of the activators cover the expected therapeutic activity ranges found in the plasma of patients treated with these "clot-busting" drugs.     

Direct electrochemistry of horseradish peroxidase immobilized on DNA/electrodeposited zirconium dioxide modified,gold disk electrode

A novel H₂O₂ biosensor is described which is based on immobilization of horseradish peroxidase (HRP) on DNA/electrodeposited, ZrO₂/modified, gold electrode. The DNA is attached via its 5′ end to ZrO₂ and this provides a microenvironment for the immobilization of various biomolecules and promotes electron transfer between HRP and the electrode surface. Under optimized conditions, the biosensor reduced H₂O₂ linearly between 3.5 μM and 10 mM with a detection limit of 0.8 μM at a signal-to-noise ratio of 3. In addition, the developed biosensor shows an acceptable stability and repeatability. Importantly, the analytical methodology could be further developed for the immobilization of other proteins and biocompounds.     

Electrochemical detection of DNA hybridization using a change in flexibility

A novel electrochemical method of detecting DNA hybridization is presented based on the change in flexibility between the single and double stranded DNA. A recognition surface based on gold nanoparticles (GNPs) is firstly modified via mixing self-assembled monolayer of thiolated probe DNA and 1,6-hexanedithiol. The hybridization and electrochemical detection are performed on the surface of probe-modified GNPs and electrode, respectively. Here in our method the charge transfer resistance (R(ct)) signal is enhanced by blocking the surface of electrode with DNA covered GNPs. The GNPs will be able to adsorb on the gold electrode when covered with flexible single stranded DNA (ssDNA). On the contrary, it will be repelled from the electrode, when covered with stiff double stranded DNA (dsDNA). Therefore, different R(ct) signals are observed before and after hybridization. The hybridization events are monitored by electrochemical impedance spectroscopy (EIS) measurement based on the R(ct) signals without any external labels. This method provides an alternative route for expanding the range of detection methods available for DNA hybridization.     

Naked eye detection of mutagenic DNA photodimers using gold nanoparticles

We developed a method to detect mutagenic DNA photodimers by the naked eye using gold nanoparticles. The stability of gold nanoparticles in a high ionic strength solution is maintained by straight ssDNA adsorbed physically on the AuNPs. However, we found that UV-irradiated DNA was less adsorptive onto gold nanoparticles because of a conformational change of UV-irradiated DNA. The accumulated deformation of the DNA structure by multiple-dimer formation triggered aggregation of the gold nanoparticles mixed with the UV-irradiated DNA and thus red to purple color changes of the mixture, which allowed colorimetric detection of the DNA photodimers by the naked eye. No fragmented mass and reactive oxygen species production under the UVB irradiation confirmed that the aggregation of gold nanoparticles was solely attributed to the accumulated deformation of the UV irradiated DNA. The degree of gold nanoparticles-aggregation was dependent on the UVB irradiated time and base compositions of the UV-irradiated oligonucleotides. In addition, we successfully demonstrated how to visually qualify the photosensitizing effect of chemical compounds in parallel within only 10 min by applying this new method. Since our method does not require any chemical or biochemical treatments or special instruments for purifying and qualifying the DNA photolesions, it should provide a feasible tool for the studies of the UV-induced mutagenic or carcinogenic DNA dimers and accelerate screening of a large number of drug candidates.     

Direct electrochemistry of hemoglobin immobilized on gold electrode by Langmuir-Blodgett technique

In this research, we reported a novel method of forming hemoglobin (Hb)-linoleic acid (LA) Langmuir-Blodgett (LB) monolayer by spreading Hb solution directly onto the subphase covered with a layer of LA. This method is suitable for preparing electrochemical devices with protein-lipid LB film because almost no protein adsorbed on electrode surface before protein-lipid film transferred from air-water interface to electrode, which ensured better electrode activity. The compressibility of Hb-LA monolayer was used to character the phase transition during compression process. Optimal experimental conditions were obtained by analyzing pressure-time, pressure-area and pressure-compressibility curves. The direct electrochemistry of Hb, which was immobilized on Au electrode surface incorporated with LA layer by LB method, was investigated using cyclic voltammetry for the first time. The electrode modified with Hb-LA LB film holds high electrochemical activity and shows a fast direct electron transfer of Hb. Redox peak currents increased linearly with the increase of scan rate, indicating a surface-controlled electrode process. The electron transfer rate constant was 2.68+/-0.45 s-1. As a target of this research, this work provides a new way to prepare biomimetic film and biosensor.     

Electrochemical studies of glucose oxidase immobilized on glutathione coated gold nanoparticles

Glutathione (L-gamma-glutamyl-L-cysteinyl-L-glycine; GSH) forms a surface monolayer on gold nanoparticles by tethering via sulfur bonds (Au:GSH). In the present study, glucose oxidase (GOx; EC 1.1.3.4) was immobilized by covalent chemical coupling reactions on to Au:GSH nanoparticles and the enzyme coupled nanoparticles formed a stable colloid (stable for several weeks) in water. The immobilized enzyme was investigated for electrochemical characteristics to monitor the FAD (prosthetic group of the GOx) redox potentials. Various concentrations of substrate (glucose) were added to check the oxidation characteristics. It was observed that with increase in substrate concentrations, the oxidation rate increased proportionally with the current. The present study demonstrated that GOx was effectively coupled to the gold nanoparticle (Au:GSH). The coupled nanoparticle system could be used in a potential biosensor application. Similarly, other enzymes (e.g., horseradish peroxidase) could be immobilized to the Au:GSH nanoparticles via the peptide arm (GSH) to achieve the desired characteristics needed for a specific application in biosensor.     

Electrochemical detection of single a-g mismatch using biosensing surface based on gold nanoparticles

The study of small drug molecules interacting with nucleic acids is an area of intense research that has particular relevance in our understanding of relative mechanism in chemotherapeutic applications and the association between genetics （including sequence variation） and drug response. In this contribution, we demonstrate how the sequence-specific binding of an anticancer drug Dacarbazine （DTIC） to single base （A-G） mismatch could be sensitively detected by combining electrochemical detection with biosensing surface based on gold nanoparticles.     

基于纳米金复合探针的基因芯片膜转印检测法

建立了一种基于纳米金复合探针的基因芯片膜转印核酸检测新方法。首先,用纳米金颗粒同时标记检测探针P2和两种长短不同且生物素化的信号探针 (T10,T40),其中检测探针与靶DNA 5￠端互补,两种信号探针起信号放大作用。当靶DNA分子存在时,芯片表面捕捉探针P1 (与靶DNA分子3￠端互补) 通过碱基互补配对原则结合靶DNA分子,将其固定于芯片上,同时检测探针通过与靶DNA 5￠端互补配对将纳米金复合探针结合于芯片表面,结果在芯片表面形成“三明治”结构,后通过链霉亲和素-生物素反应,使芯片表面对应有靶DNA分子的部位结合上碱性磷酸酶,最后利用BCIP/NBT显色系统使芯片表面信号结果镜面转印至尼龙膜表面。当检测探针和信号探针摩尔比为1∶10,T10和T40摩尔比为9:1时可以检测1 pmol/L合成靶DNA分子或0.23 pmol/L结核分枝杆菌16S rDNA PCR扩增产物,检测结果通过普通的光学扫描仪读取或肉眼直接判读信号有无。本芯片检测系统灵敏度高,操作方法简单、快速,不需要特殊仪器设备,在生物分子的检测方面具有较高的应用价值。     

Electrochemical detection of thrombin based on aptamer and ferrocenylhexanethiol loaded silica nanocapsules

A sensitive and specific electrochemical assay for detection of thrombin based on aptamer and ferrocenylhexanethiol loaded silica nanocapsules (FcSH/SiNCs) amplification is described. In the protocol, a double aptamer sandwich structure was formed in the presence of thrombin, in which an aptamer-labeled FcSH/SiNCs for electrochemical detection, and a streptavidin-coated magnetic bead immobilized aptamer for rapid and specific separation of target protein. After separated from the sample mixture under a magnetic field, the sandwich complex was treated with NaOH to release the loaded ferrocenylhexanethiol (FcSH) from the silica nanocapsules (SiNCs). Differential pulse voltammetry (DPV) was employed to detect the released FcSH, which was related to the concentration of the thrombin. The method took advantage of sandwich binding of two affinity aptamers for increased specificity, high payload of FcSH in SiNCs for signal amplification, magnetic beads for fast magnetic separation. The peak current of released FcSH had a good linear relationship with the thrombin concentration in the range of 0.1-5 nmol/L, and the detection limit of thrombin in the method was 0.06 nmol/L. The detection was also specific for thrombin without being affected by other proteins, such as immunoglobulin G, bovine serum albumin, lysozyme and human serum albumin. The method has been used to detect thrombin in human serum albumin with minimum background interference.