Interspecific somatic hybrids between Solanum bulbocastanum and S. tuberosum and their haploidization for potato breeding

Protoplast fusion between incongruent Solanum bulbocastanum and S. tuberosum haploids was accomplished to produce hybrids combining elite traits from both parents. We identified 11 somatic hybrids out of 42 regenerants analyzed through ISSR markers. Some hybrids had loss or gain of fragments compared to the parents, likely due to rearrangements and deletions of chromosome segments after fusion, and/or to somaclonal variation during hybrid regeneration. Increased heterotic vigor for some traits as well as high diversity was observed as the effect of both ploidy and fusion combination. Microsporogenesis analysis indicated the occurrence of multivalent configurations and several meiotic abnormalities, such as chromosomes bridges and various spindle orientations. Since all hybrids were sterile, in vitro anther culture was employed for haploidization as a possible strategy to overcome barriers to hybridizations. Haploids were obtained from all the tetraploid S. bulbocastanum (+) S. tuberosum somatic hybrids tested, although with differences in both the number of embryos per 100 anthers cultured and the number of differentiated green plantlets. This is the first report on the successful production of haploid plants from S. bulbocastanum (+) S. tuberosum hybrids.     

Electrofusion of protoplasts from <Emphasis Type="Italic">Solanum tuberosum</Emphasis>, <Emphasis Type="Italic">S. bulbocastanum</Emphasis> and <Emphasis Type="Italic">S. pinnatisectum</Emphasis>

This paper discusses a number of experiments performed, involving the fusion by an electric field of mesophyll protoplasts from Solanum tuberosum cv. Bintje, S. tuberosum dihaploid clones 243, 299 and the wild tuberous disease-resistant species S. bulbocastanum and S. pinnatisectum. Three fusion experiments (S. bulbocastanum + S. tuberosum dihaploid 243, S. pinnatisectum + S. tuberosum cv. Bintje and S. pinnatisectum + S. tuberosum dihaploid 299) yielded 542 calli, the 52 ones of which produced shoots. Obtained regenerants were estimated by the flow-cytometry (FC) and RAPD analysis to determine hybrid plants.The utilisation of the FC as a useful method for detecting somatic hybrids is also discussed in this paper. The combination S. bulbocastanum + S. tuberosum dihaploid 243 led to the creation of eight somatic hybrids, the combination S. pinnatisectum + S. tuberosum cv. Bintje yielded four somatic hybrids and the combination S. pinnatisectum + S. tuberosum dihaploid 299 resulted in no hybrid regenerants. Morphology in vitro, growth vigour and production of tuber-like structures were evaluated in hybrid plants. Plants were transferred in vivo for further estimation (acclimatization, habitus evaluation and tuberization ability).     

In vitro induction and identification of tetraploid plants of <Emphasis Type="Italic">Paulownia tomentosa</Emphasis>

Polyploidization is a major trend in plant evolution that has many advantages over diploid. In particular, the enlargement and lower fertility of polyploids are very attractive traits in forest tree breeding programs. We report here a system for the in vitro induction and identification of tetraploid plants of Paulownia tomentosa induced by colchicine treatment. Embryonic calluses derived from placentas were transferred to liquid Murashige and Skoog (MS) medium containing different concentrations of colchicine (0.01, 0.05, or 0.1%) and incubated for 24, 48, or 72 h on an orbital shaker at 110 rpm. The best result in terms of the production of tetraploid plantlets was obtained in the 48 h + 0.05% colchicine treatment, with more than 100 tetraploid plantlets being produced. The ploidy level of plantlets was verified by chromosome counts, flow cytometry, and morphology. The chromosome number of tetraploids was 2n = 4x = 80 and that of diploid plantlets was 2n = 2x = 40. The relative fluorescence intensity of tetraploids was twofold higher than that of diploids. The tetraploid and diploid plantlets differed significantly in leaf shape, with those of the former being round and those of the latter pentagonal. The mean length of the stomata was longer in tetraploid plants than diploid plants, and stomatal frequency was reduced with the increased ploidy level. The tetraploids had large floral organs that were easily distinguishable from those of diploid plants.     

Production of potato breeding material using somatic hybrids between <Emphasis Type="Italic">Solanum tuberosum</Emphasis> L. dihaploids and the wild diploid species <Emphasis Type="Italic">Solanum bulbocastanum</Emphasis> Dunal. from Mexico

An original approach to overcome interspecific incompatibility when backcrossing the tetraploid Solanum tuberosum + S. bulbocastanum somatic hybrids with cultivated potato was realized. This method is based on the decrease in their ploidy using anther culture and involvement of the haploid producer S. phureja IvP35. The feasibility of obtaining a diploid progeny from the somatic hybrids carrying genetic material of the wild species S. bulbocastanum and crossable with S. tuberosum dihaploids was demonstrated.     

Ploidy distribution and DNA content variations of <Emphasis Type="Italic">Lonicera caerulea</Emphasis> (Caprifoliaceae) in Japan

Ploidy level and geographical distribution were investigated in Japanese Lonicera caerulea L. Flow cytometric analysis revealed the presence of DNA diploid and DNA tetraploid plants in Japan. Chromosome observation confirmed that diploid and tetraploid plants showed 2n = 2x = 18 and 2n = 4x = 36, respectively. The DNA diploid populations were found only in lowland mires, Betsukai, Bekanbeushi, Kushiro and Kiritappu located in eastern Hokkaido. On the other hand, DNA tetraploid populations were distributed in a wide area of Hokkaido, and mainland of Japan. The habitats of DNA tetraploid plants were lowland to alpine region. The DNA content measurement with flow cytometry revealed significant differences in the relative DNA contents among DNA tetraploid populations. The relative DNA content within DNA tetraploid populations varied 1.157-fold at maximum, and might correlate with altitude indicating that DNA contents were smaller as altitude increases. The wide area of distribution in various environments of DNA tetraploid plants suggested the adaptability of the tetraploid plants. Although diploid and tetraploid populations were found, no triploid was detected, indicating crossing difficulty between diploid and tetraploid as confirmed by crossing experiment.     

High frequency of tetraploidy in Agrobacterium-mediated transformants regenerated from tuber discs of diploid potato lines

Summary Variations in the ploidy level of 69 transgenic potato (Solanum tuberosum L.) plants regenerated from the tuber discs of 17 diploid lines were studied: 24 plants (35%) were diploid, the other 45 plants (65%) were tetraploid. Seventy-eight control regenerants obtained without Agrobacterium inoculation showed a relatively low tendency to tetraploidization (35%). The results obtained suggested that chromosome doubling occurred frequently in diploid potato lines during the tissue culture process for regeneration. Putative somaclonal changes in in vitro-formed tuber proteins were detected in three out of six transformants by electrophoretic analysis.     

Somatic hybridization between the diploids of <Emphasis Type="Italic">S.</Emphasis> × <Emphasis Type="Italic">michoacanum</Emphasis> and <Emphasis Type="Italic">S. tuberosum</Emphasis>

Interspecific somatic hybrids between a diploid potato clone DG 81-68 susceptible to Phytophthora infestans (Mont.) de Bary and a resistant diploid tuber-bearing species Solanum × michoacanum were generated and analyzed. About 30 regenerants displaying an intermediate morphology were obtained as a result of three separate PEG-mediated fusion experiments. The RAPD analysis confirmed the hybridity of all the regenerants. About 50% of the hybrid plants exhibited vigorous growth and were stable in culture, while the rest of them rooted poorly and grew slowly in vitro. Most of the hybrid clones were at the tetraploid level (70%), while 30% of the clones examined were at the hexaploid level. The S. × michoacanum (+) DG 81-68 hybrids with growth anomalies were aneuploid. The variation in late blight resistance of the hybrid clones was found in detached leaflet tests, with enhanced resistance characteristic for three tetraploid hybrids.     

Interspecific somatic hybrids <Emphasis Type="Italic">Solanum bulbocastanum</Emphasis> (+) <Emphasis Type="Italic">S. tuberosum</Emphasis> H-8105

Interspecific somatic hybrids between a dihaploid potato clone H-8105 susceptible to Phytophthora infestans (Mont.) de Bary and a resistant diploid tuberizing species Solanum bulbocastanum were generated and analysed. Only ten regenerants displaying the intermediate morphology with dominating characteristics of the wild parent (simple leaves, anthocyanin pigmentation) were produced in 15 weeks after a single PEG-mediated fusion event. The RAPD patterns confirmed the hybridity of all of them. The hybrids rooted poorly and grew slowly in vitro. The cytological analysis revealed a high degree of aneuploidy in the hybrids with morphological and growth anomalies in vitro, while the morphologically normal hybrids were tetraploids. All the S. bulbocastanum (+) H-8105 hybrids were unstable in culture and three of them were consequently lost during three years of propagation in vitro. The possible reasons for instability of somatic hybrids between the distantly related species are discussed.     

Allozyme variability and phylogenetic relationships in the cultivated potato (Solanum tuberosum) and related species

Gene frequencies at 13 isozyme loci were determined in three South American taxa of cultivated potatoes [the diploid group (gp.) Stenotomum, the diploid subgroups (subgp.) Goniocalyx, and the tetraploid gp. Andigena ofS. tuberosum], in the diploid weed speciesS. sparsipilum, and in most of the main cultivars now raised in the Northern Hemisphere (the tetraploid gp. Tuberosum ofS. tuberosum). High levels of genetic variability (mean number of alleles per locus, percentage of polymorphic loci, and mean heterozygosity) were detected, being higher in tetraploid potatoes. An equilibrium among the evolutionary factors which increase genetic variability and artificial selection for maximum yield would explain the high uniformity of heterozygosity values we observed in both Andigena (0.36 ± 0.02) and Tuberosum (0.38 ± 0.01) cultivars.—The low value of genetic distance (D = 0.044) between Stenotomum and Goniocalyx does not support the status of species forS. goniocalyx.—In most isozyme loci, the electromorphs of gp. Andigena were a combination of those found in both gp. Stenotomum andS. sparsipilum, suggesting an amphidiploid origin of gp. Andigena from that two diploid taxa. The presence in Andigena of unique electromorphs, which were lacking in both gp. Stenotomum andS. sparsipilum, suggests that other diploid species could be also implied in the origin of tetraploid Andean potatoes. Furthermore, since Andigena were more related to Stenotomum (D = 0.052) than toS. sparsipilum (D = 0.241), the autopolyploidization of Stenotomum individuals and the subsequent hybridization with gp. Andigena may also have occurred. Thus, our study suggests a multiple origin (amphidiploidy, autoploidy, and hybridization at tetraploid level) of gp. Andigena.—Most of the electromorphs of gp. Tuberosum were also found in gp. Andigena; both the direct derivation of that group from the Andean tetraploid potatoes and the repeated introgression provided by breeding programmes could explain this result. However, the allele c of Pgm-B, present in 30 out of 76 Tuberosum cultivars from Northern Hemisphere as well as in 3 Chilean Tuberosum cultivars, lacks in the 258 Andigena genotypes sampled, suggesting that Chilean germplasm could have taken part in the origin of at least the 39% of the potato cultivars from Europe and North America analyzed here.—The distanceWagner procedure provides an estimate of a 30% of heterogeneity in the evolutionary divergence shown by different groups of cultivated potatoes. Diploid groups show a higher (22.5%) evolutionary rate than tetraploids, which can be attributed to both tetrasomic inheritance and facultative autofecundation that exists in Andigena and Tuberosum groups. Thus, artificial selection acting since 10000 years has not resulted in a higher rate of molecular evolution at the isozyme level in the tetraploids.     

Application of somatic hybrids between dihaploids of potato Solanum tuberosum L. and wild diploid species from Mexico in breeding: Generation and backcrossing of dihaploids of somatic hybrids

The efficiency of an original approach to involvement of the valuable genetic pool of wild diploid potato species from Mexico is estimated. The essence of this method is in generation of dihaploids (2n = 2x = 24) of tetraploid somatic hybrids (2n = 4x = 48) followed by backcrossing with dihaploids of Solanum tuberosum. A haploid producer, S. phureja IvP35, was used to generate ten dihaploids of S. tuberosum + S. pinnatisectum, all of which crossed with fertile S. tuberosum dihaploids and developed plump viable seeds. This gives the possibility of an efficient introgression of the genes valuable for breeding from wild species to the bred plants at a diploid level, which has several advantages compared with the corresponding procedure at a tetraploid level. A part of the dihaploids produced was compatible (the pollen tubes reached the ovary) with diploid and tetraploid forms of S. pinnatisectum; however, no viable seeds were developed. The attempt to generate the dihaploids of S. tuberosum + S. bulbocastanum somatic hydrides using the haploid producer S. phureja IvP35 was unsuccessful.     

Regeneration of plants from protoplasts of rapid cycling Brassica oleracea L.

Rapid cycling Brassica species have great potential in plant genetic research because of their short life cycles and their minimal space requirements. Rapid cycling B. oleracea can be grown with up to six generations per year. Protoplast culture of this genotype can be applied for gene transfer by direct DNA uptake and by protoplast fusion. We here report on fast regeneration of flowering plants from protoplasts of rapid cycling B. oleracea. Regeneration frequencies of 27–65% were achieved with multiple shoots developing from individual calli. The regenerated plants were grown to maturity, and flowering and other morphological characteristics were monitored. The regenerants flowered within a similar time frame as plants grown from seeds. The ploidy level of regenerated and seed-grown plants was measured by flow cytometry. Many (20–45%) of the regenerants were tetraploid. Although only few seeds could be obtained from the tetraploids, large numbers of seeds with good germination were recovered from the diploid regenerants.Abbreviations MS-3,0 Murashige and Skoog medium containing 3% sucrose and no growth regulators - MES 1-morpholino-ethane sulfonate     

Pollen and stomata morphometrics and polyploidy in Eriotheca (Malvaceae‐Bombacoideae)

Approximately 70% of the angiosperm species are polyploid, an important phenomenon in the evolution of those plants. But ploidy estimates have often been hindered because of the small size and large number of chromosomes in many tropical groups. Since polyploidy affects cell size, morphometric analyses of pollen grains and stomata have been used to infer ploidy level. Polyploidy is present in many species of the Cerrado, the Neotropical savanna region in Central Brazil, and has been linked to apomixis in some taxa. Eriotheca gracilipes and Eriotheca pubescens are common tree species in this region, and present cytotypes that form reproductive mosaics. Hexaploid individuals (2n = 6x = 276) are polyembryonic and apomictic, while tetraploid and diploid individuals (2n = 2x = 92, 2n = 4x = 184) are sexual and monoembryonic. We tested whether morphometric analysis can be used to estimate ploidy levels in E. gracilipes and E. pubescens individuals. Pollen material from diploid and hexaploid individuals of E. gracilipes, and tetraploid and hexaploid individuals of E. pubescens, were fixed in 50% FAA, and expanded leaves were dried in silica gel. Pollen grains and stomata of at least five individuals from each population were measured. The results demonstrate that all measures were significantly different among cytotypes. Individuals with higher levels of ploidy (hexaploid) all presented measurements that were higher than those with lower levels (diploid and tetraploid). There was no overlap between ploidy levels in each species at 95% confidence interval. Thus, the size of the pollen grains and stomata are effective parameters for analysis of ploidy levels in E. gracilipes and E. pubescens.     

Plant regeneration from in vitro culture of anthers of Solanum chacoense Bitt. and interspecific diploid hybrids S. tuberosum L. x S. chacoense Bitt.

Summary Production of plants from cultured anthers of Solanum chacoense clone IP 33, of its interspecific diploid hybrids with S. tuberosum clones IP 354 and IP 372, and of a complex Solanum hybrid containing in its genome S. ajanhuiri is reported. Genotypic differences were found to influence both the induction phase and the regeneration process. Hybrids derived from clone IP 354 of S. tuberosum were much more responsive in culture than hybrids from clone IP 372. Altogether, 507 plants were regenerated and 309 were cytologically analyzed. Of these, 52% were haploid, 47% diploid and 1% mixoploid or tetraploid. A number of diploid plants probably originated from unreduced microspores and some genetic consequences of this event are discussed.     

A comparison of tissue culture response between related tetraploid and dihaploid S. tuberosum genotypes

The response to tissue culture of a series of related, agronomically useful, dihaploid (2n=2x=24) and tetraploid (2n=4x=48) S. tuberosum genotypes was assessed by regenerating shoots from leaf explants. Dihaploid genotypes that showed superior responses to their tetraploid parents were identified. Large differences in tissue culture response were also found between dihaploid genotypes derived from the same tetraploid parents. These results indicate that it should be possible to select agronomically useful dihaploid genotypes with good tissue culture responses for use in genetic manipulation experiments. Possible factors determining tissue culture response in S. tuberosum are discussed.     

Hybrid origins of cultivated potatoes

Solanum section Petota is taxonomically difficult, partly because of interspecific hybridization at both the diploid and polyploid levels. The taxonomy of cultivated potatoes is particularly controversial. Using DNA sequence data of the waxy gene, we here infer relationships among the four species of cultivated potatoes accepted in the latest taxonomic treatment (S. ajanhuiri, S. curtilobum, S. juzepczukii and S. tuberosum, the latter divided into the Andigenum and Chilotanum Cultivar Groups). The data support prior ideas of hybrid origins of S. ajanhuiri from the S. tuberosum Andigenum Group (2x = S. stenotomum) × S. megistacrolobum; S. juzepczukii from the S. tuberosum Andigenum Group (2x = S. stenotomum) × S. acaule; and S. curtilobum from the S. tuberosum Andigenum Group (4x = S. tuberosum subsp. andigenum) × S. juzepczukii. For the tetraploid cultivar-groups of S. tuberosum, hybrid origins are suggested entirely within much more closely related species, except for two of three examined accessions of the S. tuberosum Chilotanum Group that appear to have hybridized with the wild species S. maglia. Hybrid origins of the crop/weed species S. sucrense are more difficult to support and S. vernei is not supported as a wild species progenitor of the S. tuberosum Andigenum Group.     

Breeding barriers at a diploid–hexaploid contact zone in <Emphasis Type="Italic">Aster amellus</Emphasis>

Polyploidization is an important mechanism of sympatric speciation, but few studies have addressed breeding barriers between polyploids and their diploid progenitors in the field, and the available data have been mainly obtained from diploid-tetraploid contact zones. In contrast to diploid-tetraploid complexes, hybridization between diploid and hexaploid individuals may lead to viable fertile tetraploid offspring, and thus the interactions between these ploidy levels can be more complex. We investigated the breeding barriers operating between diploid and hexaploid individuals of Aster amellus at a contact zone in Central Europe to understand the absence of hybrids (i.e., tetraploids) and mixed populations. Phenological segregation, assortative mating mediated by pollinators and crossing ability were assessed under natural and controlled conditions in diploid and hexaploid populations growing in close proximity. The results revealed low levels of reproductive isolation (RI) due to flowering phenology (RI = 11–45%) and pollinator behavior (RI = 17%), so that pollen transfer between diploids and hexaploids is possible. In contrast, almost complete reproductive isolation was observed due to a series of post-pollination barriers that significantly reduced the production of offspring from inter-cytotype crosses (RI = 99.9%), even though some tetraploids were detected in seeds and seedlings. We conclude that the absence of tetraploids at the contact zone is probably due to a combination of several factors, including spatial segregation, strong post-pollination barriers (such as gametic isolation, low viability of tetraploid seeds and/or inability of tetraploid plants to reach the flowering stage), and to a lesser extent, temporal and behavioral segregation. Future studies should explore the fitness of tetraploids and the effect of different traits on the reproductive success and fitness of each cytotype. This will enable a fuller understanding of the dynamics and mechanisms acting in contact zones.     

Electrofusion of protoplasts from Solanum tuberosum, S. nigrum and S. bulbocastanum

Leaf protoplasts of two wild species, Solanum nigrum var. gigantea (S. ngr gig) and S. bulbocastanum Dun. (S. blb), were electrofused with leaf protoplasts of two diploid potato clones, H-8105 and ZEL-1136, respectively, in order to confer the late blight-resistance from the wild species to the cultivated potato. The S. ngr gig mesophyll (+) H-8105 mesophyll combination resulted in regenerants of mostly normal ngr phenotype. Two regenerants from this combination were proved to be true hybrids by RAPD analysis but they rooted poorely in vitro and did not survive the transfer to soil. The S. ngr gig (+) H-8105 fusion combination was also performed with H-8105 cell suspension derived protoplasts enabling an easy identification of interspecific fusants on basis of their intermediate morphology. From the S. ngr gig mesophyll (+) H-8105 cultured cell combination, many abnormal shoots were regenerated. The two lines which survived had normal ngr phenotype but the presence of tuberosum (tbr) genome in those regenerants was not confirmed by RAPD analysis. No plants with tbr phenotype were obtained from both of S. ngr gig (+) H-8105 combinations. On the contrary, when S. blb mesophyll protoplasts were electrofused with ZEL-1136 mesophyll protoplasts, all regenerated plants had tbr phenotype, indicating much lower morphogenetic potential of S. bulbocastanum in comparison with that of S. nigrum var. gigantea. However, the hybridity of those regenerants has not been confirmed by RAPD analysis with two different primers. The efficiency of the applied fusion procedure and analysis of the regenerants is discussed.     

The association between polyploidy and clonal reproduction in diploid and tetraploid Chamerion angustifolium

Clonal reproduction is associated with the incidence of polyploidy in flowering plants. This pattern may arise through selection for increased clonality in polyploids compared to diploids to reduce mixed‐ploidy mating. Here, we test whether clonal reproduction is greater in tetraploid than diploid populations of the mixed‐ploidy plant, Chamerion angustifolium, through an analysis of the size and spatial distribution of clones in natural populations using AFLP genotyping and a comparison of root bud production in a greenhouse study. Natural tetraploid populations (N = 5) had significantly more AFLP genotypes ( = 10.8) than diploid populations ( = 6.0). Tetraploid populations tended to have fewer ramets per genotype and fewer genotypes with >1 ramet. In a spatial autocorrelation analysis, ramets within genotypes were more spatially aggregated in diploid populations than in tetraploid populations. In the greenhouse, tetraploids allocated 90.4% more dry mass to root buds than diploids, but tetraploids produced no more root buds and 44% fewer root buds per unit root mass than diploids. Our results indicate that clonal reproduction is significant in most populations, but tetraploid populations are not more clonal than diploids, nor are their clones more spatially aggregated. As a result, tetraploids may be less sheltered from mixed‐ploidy mating and diploids more exposed to inbreeding, the balance of which could influence the establishment of tetraploids in diploid populations.     

In vitro regeneration and cytological characterization of shoots from leaf explants of three accessions of Solanum commersonii

In vitro culture of explants were used to apply genetic or cell engineering techniques to the sexually incompatible potato relative Solanum commersonii (2n=2x=24) Three accessions of S. commersonii were tested for regeneration from leaf explants using six different protocols. A two step-regeneration procedure gave the best results. Genetic variability for regeneration ability was found between accessions, and between clones within accessions. The accession PI 472834 regenerated at highest frequency. Clones with high regeneration ability were selected. Approximately 60% of regenerated plants were diploids and 40% were tetraploids. A very low frequency of chimeras was found. Leaf shape and chloroplast counts in guard cells were shown to be quick and reliable methods for estimating ploidy levels. Use of the diploid and tetraploid regenerants obtained for potato breeding is discussed.Abbreviations BAP 6-benzylaminopurine - EBN Endosperm Balance Number - GA₃ gibberellic acid - IAA indole-3-acetic acid - MS Murashige and Skoog - NAA 1-naphthalene-acetic acid - ZEA zeatin