Potenytial cost savings for fuel ethanol production by employing a novel hybrid yeast strain

Summary A hybrid yeast (Labatt culture collection strain 1393) was investigated for its ability to ferment a corn mash with reduced concentrations of added glucoamylase. It was found that glucoamylase additions could be decreased by as much as 50 percent. This reduction could represent significant cost savings in the production of fuel ethanol.     

Enzymatic hydrolysis and fermentation of corn for fuel alcohol

The integration of enzyme saccharification with fermentation reduces the total time required to produce acceptable levels of ethanol. The use of a more concentrated mash (84.8 L total mash/bu corn) results in a 26.6% increase in ethanol productivity and a 21.4% increase in beer ethanol concentration compared to standard corn mash (96.6 L total mash/bu corn). Thus, the energy requirement and cost of distillation can be reduced. The addition of waste cola syrup at 30 g invert sugar/L total mash gave a 19% increase in ethanol concentration in the final beer and required only a small increase in the period of fermentation. Surplus laundry starch can replace 30-50% of the weight of corn normally used in fermentation without influencing ethanol production or the time required for fermentation. Both of these waste materials reduce the unit cost of ethanol and demonstrate the value of such substances in ethanol systems.     

Effects of ethanol concentration and stripping temperature on continuous fermentation rate

The operation of a pilot plant consisting of a 14-l fermentor, 10-cm packed column and condenser for continuous fermentation and stripping of ethanol was stable for more than 100 days. The feed consisted of a non-sterile solution of 560 g/l glucose with 100 g/l corn steep water. Fouling of the packing in the column with attached growth of yeast cells was controlled by in situ washing at intervals of 3–6 days. A computer simulation of the pilot plant was developed and used to analyze the data. The productivity of the continuous fermentor varied from 14 g ethanol to 17 g ethanol l⁻¹ h⁻¹. The yield was equal to the maximum theoretically possible: 0.51 g ethanol/g glucose consumed. Results are fit to linear models for the effects of ethanol concentration on specific growth rate and cell yield, and for the effect of stripping temperature on specific growth rate. Received: 16 October 1996 / Received revision: 3 January 1997 / Accepted: 24 January 1997     

Farm-scale production of fuel ethanol and wet grain from corn in a batch process

The batch production of fuel grade ethanol and distillers' wet grain (wet solids) in a farm-scale process (1240-15,580 L/batch) is described. The employs yeast fermentation of amylase-treated corn mash and a two-stage distillation. Primary emphasis in this study was on the cooking, fermentation, and centrifugation steps. Without recycling, fermentation of the mash yield beers with 10.0-10.5% ethanol. Recycling of stillage supernatant at full, 75, or 50% strengths produced enriched mashes that after 48-h fermentation yielded beers with 5-;14% more ethanol. Recycling twice with full-strength supernatant at pH 7.0 increased the ethanol yield in the final beer 16.5%; however, the time to complete the final fermentation was extended form 48 to 72 h and salt buildup occurred. By recycling at pH 5.4, it was possible to avoid rapids salt buildup and obtain beers with 10.3-10.5% ethanol. Recycling resulted in increased levels of glucose, starch, crude protein, and fat in the beer and a reduced moisture content while the wet solids showed an increased starch content. Centrifugation after cooking or fermentation yield in the subsequently produced beer. Fermentation of a volume-resorted mash supernatant gave a beer with only 9.25% ethanol. Mash wet solids varied somewhat chemically from beer and stillage solids. An economic and energy balance analysis of various modes of plant operation are provided and plant considerations are suggested.     

Interaction effects of lactic acid and acetic acid at different temperatures on ethanol production by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> in corn mash

The combined effects of lactic acid and acetic acid on ethanol production by S. cerevisiae in corn mash, as influenced by temperature, were examined. Duplicate full factorial experiments (three lactic acid concentrations × three acetic acid concentrations) were performed to evaluate the interaction between lactic and acetic acids on the ethanol production of yeast at each of the three temperatures, 30, 34, and 37°C. Corn mash at 30% dry solids adjusted to pH 4 after lactic and acetic acid addition was used as the substrate. Ethanol production rates and final ethanol concentrations decreased (P<0.001) progressively as the concentration of combined lactic and acetic acids in the corn mash increased and the temperature was raised from 30 to 37°C. At 30°C, essentially no ethanol was produced after 96 h when 0.5% w/v acetic acid was present in the mash (with 0.5, 2, and 4% w/v lactic acid). At 34 and 37°C, the final concentrations of ethanol produced by the yeast were noticeably reduced by the presence of 0.3% w/v acetic acid and ≥2% w/v lactic acid. It can be concluded that, as in previous studies with defined media, lactic acid and acetic acid act synergistically to reduce ethanol production by yeast in corn mash. In addition, the inhibitory effects of combined lactic and acetic acid in corn mash were more apparent at elevated temperatures.     

Real‐time monitoring of high‐gravity corn mash fermentation using in situ raman spectroscopy

In situ Raman spectroscopy was employed for real‐time monitoring of simultaneous saccharification and fermentation (SSF) of corn mash by an industrial strain of Saccharomyces cerevisiae. An accurate univariate calibration model for ethanol was developed based on the very strong 883 cm^?1 C–C stretching band. Multivariate partial least squares (PLS) calibration models for total starch, dextrins, maltotriose, maltose, glucose, and ethanol were developed using data from eight batch fermentations and validated using predictions for a separate batch. The starch, ethanol, and dextrins models showed significant prediction improvement when the calibration data were divided into separate high‐ and low‐concentration sets. Collinearity between the ethanol and starch models was avoided by excluding regions containing strong ethanol peaks from the starch model and, conversely, excluding regions containing strong saccharide peaks from the ethanol model. The two‐set calibration models for starch (R² = 0.998, percent error = 2.5%) and ethanol (R² = 0.999, percent error = 2.1%) provide more accurate predictions than any previously published spectroscopic models. Glucose, maltose, and maltotriose are modeled to accuracy comparable to previous work on less complex fermentation processes. Our results demonstrate that Raman spectroscopy is capable of real time in situ monitoring of a complex industrial biomass fermentation. To our knowledge, this is the first PLS‐based chemometric modeling of corn mash fermentation under typical industrial conditions, and the first Raman‐based monitoring of a fermentation process with glucose, oligosaccharides and polysaccharides present. Biotechnol. Bioeng. 2013; 110: 1654–1662. © 2013 Wiley Periodicals, Inc.     

Lipids-free waxy corn starch as a substrate for distillery yeasts <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Utilization of lipids-free waxy starch by distillery yeasts in fuel ethanol production can contribute to better management of renewable resources, like cereals, especially maize Zea mays L. But the efficient conversion of starch into glucose-rich fermentable substrate, and subsequently to ethanol, needs more research on hydrolysis and fermentation conditions. The aim of this study was to evaluate the lack of natural corn grain lipids on the process of simultaneous saccharification and fermentation using chemometric techniques of designed experiments, commercial enzymatic preparations and distillery yeasts Saccharomyces cerevisiae CCY-11-3. Based on the results and statistical software support we can conclude that extraction of lipids from corn grains did not lead to statistically significant increase or decrease of glucose concentration in starch hydrolysis. The ethanol concentration in fermentation mash according to analysis was not statistically significantly affected by lipids extraction. The separated lipids could serve as a source of very valuable corn oil.     

Control of packed column fouling in the continuous fermentation and stripping of ethanol

By recycling the contents of a 14 L fermentor through a stripping column to continuously remove ethanol and reduce product inhibition, continuous complete conversion of nutrient feed containing 600 g/L glucose was achieved in a small pilot plant. Ethanol was recovered from the carbon dioxide stripping gas in a refrigerated condenser, and the gas was reheated with steam and recycled by a blower. Productivity of ethanol in the fermentor as high as 15.8 g/L/h and condensate production of up to 10 L/day of almost 50% by volume ethanol were maintained for up to 60 days of continuous operation. Weekly washing of the column packing in situ was required to prevent loss of performance caused by attached growth of yeast cells, which restricts the gas flow rate through the stripping column. (c) 1996 John Wiley & Sons, Inc.     

Economic analysis of fuel ethanol production from winter hulled barley by the EDGE (Enhanced Dry Grind Enzymatic) process

A process and cost model was developed for fuel ethanol production from winter barley based on the EDGE (Enhanced Dry Grind Enzymatic) process. In this process, in addition to β-glucanases, which are added to reduce the viscosity of the mash, β-glucosidase is also added to completely hydrolyze the oligomers obtained during the hydrolysis of β-glucans to glucose. The model allows determination of capital costs, operating costs, and ethanol production cost for a plant producing 40 million gallons of denatured fuel ethanol annually. A sensitivity study was also performed to examine the effects of β-glucosidase and barley costs on the final ethanol production cost. The results of this study clearly demonstrate the economic benefit of adding β-glucosidase. Lower ethanol production cost was obtained compared to that obtained without β-glucosidase addition in all cases except one where highest β-glucosidase cost allowance and lowest barley cost were used.     

Ethanol production by genetically modified strains of Saccharomyces

Summary Two polyploid yeast strains and two genetically manipulated yeast strains were subjected to anaerobic fermentations in whole corn mash and defined media. Carbohydrate utilization and ethanol production rates were investigated. Whilst the polyploid strains exhibited superior performance in the whole corn mash, the genetically manipulated strains were so in defined media with glucose as the substrate. The overall fermentation performance of the novel strains however was comparable to the polyploid strains with corn mash as the substrate when most of the solid material had been removed. The flocculating and dextrin utilizing properties of the yeast strains examined play an important role in such fermentations.     

Buffering capacity of whole corn mash alters concentrations of organic acids required to inhibit growth of Saccharomyces cerevisiae and ethanol production

Growth of Saccharomyces cerevisiae and fermentative ethanol production in the presence of acetic and lactic acids was measured in whole corn mash. In this industrial medium, as compared to glucose minimal medium, the yeast had increased tolerance to organic acid stress. It was concluded that the increased buffering capacity of whole corn mash, resulting in decreased concentration of undissociated acid, was responsible for this phenomenon.     

Fuel ethanol and high protein feed from corn and corn-whey mixtures in a farm-scale plant

Distiller's wet grain (DWG) and 95% ethanol were produced from corn in a farm-scale process involving batch cooking-fermentation and continuous distillation-centrifugation. The energy balance was 2.26 and the cost was $1.86/gal (1981 cost). To improve the energy balance and reduce costs, various modifications were made in the plant. The first change, back-end (after liquefaction) serial recycling of stillage supernatant at 20 and 40% strengths, produced beers with 0.2 and 0.4% (v/v) more ethanol, respectively, than without recycling. This increased the energy balance by 0.22-0.43 units and reduced costs by $0.07-$0.10/gal. The DWGs from back-end recycling had increased fat. The second change, increasing the starch content from 17-19% to 27.5%, increased the ethanol in the beer from 10.5-14.9% at a cost saving of $0.41/gal. The energy balance increased by 1.08 units. No significant change was seen in DWG composition. The third change, using continuous cascade rather than batch fermentation, permitted batch-levels of ethanol (10%) in the beer but only at low dilution rates. Both the cost and energy balance were decreased slightly. The DWG composition remained constant. The last change, replacing part of the corn and all of the tap water in the mash with whole whey and using Kluyveromyces fragilis instead of Saccharomyces cerevisiae during fermentation, resulted in an energy balance increase of 0.16 units and a $0.27/gal cost reduction. Here, 10% ethanolic beers were produced and the DWGs showed increased protein and fat. Recommendations for farm-scale plants are provided.     

Effect of pH and lactic or acetic acid on ethanol productivity by Saccharomyces cerevisiae in corn mash

The effects of lactic and acetic acids on ethanol production by Saccharomyces cerevisiae in corn mash, as influenced by pH and dissolved solids concentration, were examined. The lactic and acetic acid concentrations utilized were 0, 0.5, 1.0, 2.0, 3.0 and 4.0% w/v, and 0, 0.1, 0.2, 0.4, 0.8 and 1.6% w/v, respectively. Corn mashes (20, 25 and 30% dry solids) were adjusted to the following pH levels after lactic or acetic acid addition: 4.0, 4.5, 5.0 or 5.5 prior to yeast inoculation. Lactic acid did not completely inhibit ethanol production by the yeast. However, lactic acid at 4% w/v decreased (P<0.05) final ethanol concentration in all mashes at all pH levels. In 30% solids mash set at pH ≤5, lactic acid at 3% w/v reduced (P<0.05) ethanol production. In contrast, inhibition by acetic acid increased as the concentration of solids in the mash increased and the pH of the medium declined. Ethanol production was completely inhibited in all mashes set at pH 4 in the presence of acetic acid at concentrations ≥0.8% w/v. In 30% solids mash set at pH 4, final ethanol levels decreased (P<0.01) with only 0.1% w/v acetic acid. These results suggest that the inhibitory effects of lactic acid and acetic acid on ethanol production in corn mash fermentation when set at a pH of 5.0–5.5 are not as great as that reported thus far using laboratory media.     

A continuous, farm-scale, solid-phase fermentation process for fuel ethanol and protein feed production from fodder beets

Fuel ethanol (95%) was produced from fodder beets in two farm-scale processes. In the first process, involving conventional submerged fermentation of the fodder beets in a mash, ethanol and a feed (PF) rich in protein, fat, and fiber were produced. Ethanol yields of 70 L/metric ton (7 gal/ton) were obtained; however, resulting beers had low ethanol concentrations [3-5% (v/v)]. The high viscosity of medium and low sugar, beet mashes caused mixing problems which prevented any further increase of beet sugar in the mash. The severely limited the maximum attainable ethanol concentration during fermentation, thereby making the beer costly to distill into fuel ethanol and the process energy inefficient. In order to achieve distillably worthwhile ethanol concentrations of 8-10% (v/v), we developed and tested a solid-phase fermentation process (continuous). In preliminary trials, this system produced fermented pulp with over 8% (v/v) ethanol corresponding to an ethanol yield of 87 L/metric ton (21 gal/ton). Production costs with this novel process are $0.47/L ($1.77/gal) and the energy balance is 2.11. These preliminary cost estimates indicate that fodder beets are potentially competitive with corn as an ethanol feedstock. Additional research, however, is warranted to more precisely refine individual costs, energy balances and the actual value of the PF.     

Modeling of PAH Elimination by Adiabatic Steam Stripping and Intraparticle Desorption

The decontamination process of solids loaded with PAH in a pilot plant is modeled. This process is separated into two main stages: fast steam stripping at the entrance of the separation tube and the subsequent slow desorption of PAH from the interior of the soil particles. The stripping process also occurs in two stages: fast diffusion controlled saturation of the partial pressures followed by the heat transfer controlled evaporation. The phase diagram of PAH/water is constructed using both the microscopic model and empirical relationships for systems with wide miscibility gaps. The numerical basis for the calculations describing desorption from the soil particles is discussed. The model for multiple PAH components is based on Langmuir type isotherms which include surface diffusion terms. The obtained results are contrasted with analytical data for systems displaying linear isotherms by dispersive approximation.     

Kinetics of continuous fermentation and stripping of ethanol

A pilot plant consisting of a 30-liter fermenter, and a 10-cm packed column with a blower and condenser to recover ethanol vapors was operated continuously for 185 days. On-line washing of the packing in the column twice weekly with condensed ethanol from the process (approximately 45% v/v) controlled fouling by attached yeast cells. Steady-state glucose consumption rates of up to 800 gh-1, condensed ethanol production rates of up to 26 l/day, and consistently high ethanol yield of approximately 0.50 gg-1 glucose were observed. Data from the pilot plant showed that the primary inhibitory effect of ethanol on the steady-state fermenter performance was to decrease the cell yield, while the specific glucose consumption rate was almost unaffected by ethanol concentrations up to 65 gl-1. A new kinetic model is introduced to represent these effects.     

An industrial level system with nonisothermal simultaneous solid state saccharification,fermentation and separation for ethanol production

To alleviate the problems of low substrate loading, nonisothermal, end-product inhibition of ethanol during the simultaneous saccharification and fermentation, a nonisothermal simultaneous solid state saccharification, fermentation, and separation (NSSSFS) process was investigated; one novel pilot scale nonisothermal simultaneous solid state enzymatic saccharification and fermentation coupled with CO₂ gas stripping loop system was invented and tested. The optimal pretreatment condition of steam-explosion was 1.5 MPa for 5 min in industrial level. In the NSSSFS, enzymatic saccharification and fermentation proceeded at around 50 °C and 37 °C, respectively, and were coupled together by the hydrolyzate loop; glucose from enzymatic saccharification was timely consumed by yeast, and the formed ethanol was separated online by CO₂ gas stripping coupled with adsorption of activated carbon; the solids substrate loading reached 25%; ethanol yields from 18.96% to 30.29% were obtained in fermentation depending on the materials tested. Based on the pilot level of 300 L fermenter, a novel industrial-level of 110 m³ solid state enzymatic saccharification, fermentation and ethanol separation plant had been successfully established and operated. The NSSSFS was a novel and feasible engineering solution to the inherent problems of simultaneous saccharification and fermentation, which would be used in large scale and in industrial production of ethanol.     

Biotechnological processes for conversion of corn into ethanol

Ethanol has been utilized as a fuel source in the United States since the turn of the century. However, it has repeatedly faced significant commercial viability obstacles relative to petroleum. Renewed interest exists in ethanol as a fuel source today owing to its positive impact on rural America, the environment and United States energy security. Today, most fuel ethanol is produced by either the dry grind or the wet mill process. Current technologies allow for 2.5 gallons (wet mill process) to 2.8 gallons (dry grind process) of ethanol (1 gallon = 3.785 l) per bushel of corn. Valuable co-products, distillers dried grains with solubles (dry grind) and corn gluten meal and feed (wet mill), are also generated in the production of ethanol. While current supplies are generated from both processes, the majority of the growth in the industry is from dry grind plant construction in rural communities across the corn belt. While fuel ethanol production is an energy-efficient process today, additional research is occurring to improve its long-term economic viability. Three of the most significant areas of research are in the production of hybrids with a higher starch content or a higher extractable starch content, in the conversion of the corn kernel fiber fraction to ethanol, and in the identification and development of new and higher-value co-products.     

Grain pearling and very high gravity (VHG) fermentation technologies for fuel alcohol production from rye and triticale

A SATAKE laboratory abrasive mill was used for rye and triticale grain processing. About 12% of dry grain mass was removed after three and five successive abrasions for triticale and rye, respectively. Starch contents in the pearled grain were increased by 8·0% for triticale, and by 7·1% for rye. The pearled rye and triticale were ground and fermented by active dry yeast for fuel alcohol production by very high gravity (VHG) fermentation at 20°C. VHG technology was applied to increase final ethanol concentrations in the fermentors from 9·5–10·0% (v/v) (normal gravity) to 12·9–15·1% (v/v). The grain pearling process coupled with VHG technology further raised the ethanol concentration to 15·7–16·1% (v/v). Partial removal of outer grain solids in an alcohol plant would improve plant efficiency and decrease energy requirements for mash heating, mash cooling, and ethanol distillation.