Comparison of Commercially Available Target Enrichment Methods for Next-Generation Sequencing

Isolating high-priority segments of genomes greatly enhances the efficiency of next-generation sequencing (NGS) by allowing researchers to focus on their regions of interest. For the 2010–11 DNA Sequencing Research Group (DSRG) study, we compared outcomes from two leading companies, Agilent Technologies (Santa Clara, CA, USA) and Roche NimbleGen (Madison, WI, USA), which offer custom-targeted genomic enrichment methods. Both companies were provided with the same genomic sample and challenged to capture identical genomic locations for DNA NGS. The target region totaled 3.5 Mb and included 31 individual genes and a 2-Mb contiguous interval. Each company was asked to design its best assay, perform the capture in replicates, and return the captured material to the DSRG-participating laboratories. Sequencing was performed in two different laboratories on Genome Analyzer IIx systems (Illumina, San Diego, CA, USA). Sequencing data were analyzed for sensitivity, specificity, and coverage of the desired regions. The success of the enrichment was highly dependent on the design of the capture probes. Overall, coverage variability was higher for the Agilent samples. As variant discovery is the ultimate goal for a typical targeted sequencing project, we compared samples for their ability to sequence single-nucleotide polymorphisms (SNPs) as a test of the ability to capture both chromosomes from the sample. In the targeted regions, we detected 2546 SNPs with the NimbleGen samples and 2071 with Agilent''s. When limited to the regions that both companies included as baits, the number of SNPs was ∼1000 for each, with Agilent and NimbleGen finding a small number of unique SNPs not found by the other.     

Comparison of Sample Preparation Methods Used for the Next-Generation Sequencing of Mycobacterium tuberculosis

The advent and widespread application of next-generation sequencing (NGS) technologies to the study of microbial genomes has led to a substantial increase in the number of studies in which whole genome sequencing (WGS) is applied to the analysis of microbial genomic epidemiology. However, microorganisms such as Mycobacterium tuberculosis (MTB) present unique problems for sequencing and downstream analysis based on their unique physiology and the composition of their genomes. In this study, we compare the quality of sequence data generated using the Nextera and TruSeq isolate preparation kits for library construction prior to Illumina sequencing-by-synthesis. Our results confirm that MTB NGS data quality is highly dependent on the purity of the DNA sample submitted for sequencing and its guanine-cytosine content (or GC-content). Our data additionally demonstrate that the choice of library preparation method plays an important role in mitigating downstream sequencing quality issues. Importantly for MTB, the Illumina TruSeq library preparation kit produces more uniform data quality than the Nextera XT method, regardless of the quality of the input DNA. Furthermore, specific genomic sequence motifs are commonly missed by the Nextera XT method, as are regions of especially high GC-content relative to the rest of the MTB genome. As coverage bias is highly undesirable, this study illustrates the importance of appropriate protocol selection when performing NGS studies in order to ensure that sound inferences can be made regarding mycobacterial genomes.     

基于高通量测序技术的微生物检测数据分析方法

高通量测序技术的发展正在逐渐改变诸多生物学领域的研究方法.为应对突发疫情以及新发未知微生物威胁的需求,微生物鉴定技术逐渐从传统的物理化学方法及核酸杂交等分子水平方法进一步走向利用无需培养的测序数据进行快速分析检测.随之而来的是对高通量数据分析在精度及速度的要求.基于高通量测序数据的微生物检测数据分析方法在近些年得到了快速的发展.本文分析了目前基于高通量测序数据的微生物检测数据分析方法,对其数据分析的处理流程和计算方法进行了研究,比较了各个微生物检测数据分析方法的特点及适用场景.最后结合本实验室工作总结微生物检测数据分析方法在实际应用中可能遇到的问题,希望对该应用领域的研究有一定的参考意义.     

Comprehensive Evaluation and Optimization of Amplicon Library Preparation Methods for High-Throughput Antibody Sequencing

High-throughput sequencing (HTS) of antibody repertoire libraries has become a powerful tool in the field of systems immunology. However, numerous sources of bias in HTS workflows may affect the obtained antibody repertoire data. A crucial step in antibody library preparation is the addition of short platform-specific nucleotide adapter sequences. As of yet, the impact of the method of adapter addition on experimental library preparation and the resulting antibody repertoire HTS datasets has not been thoroughly investigated. Therefore, we compared three standard library preparation methods by performing Illumina HTS on antibody variable heavy genes from murine antibody-secreting cells. Clonal overlap and rank statistics demonstrated that the investigated methods produced equivalent HTS datasets. PCR-based methods were experimentally superior to ligation with respect to speed, efficiency, and practicality. Finally, using a two-step PCR based method we established a protocol for antibody repertoire library generation, beginning from inputs as low as 1 ng of total RNA. In summary, this study represents a major advance towards a standardized experimental framework for antibody HTS, thus opening up the potential for systems-based, cross-experiment meta-analyses of antibody repertoires.     

Strategy for Modular Tagged High-Throughput Amplicon Sequencing

The use and validation of a strategy that allows a universal set of bar-coded sequencing primers to be appended to an amplified PCR product is described. The strategy allows a modular approach, in that the same bar code can be used with two or more target-specific primer sets, even simultaneously.     

Comparative Studies of Copy Number Variation Detection Methods for Next-Generation Sequencing Technologies

Copy number variation (CNV) has played an important role in studies of susceptibility or resistance to complex diseases. Traditional methods such as fluorescence in situ hybridization (FISH) and array comparative genomic hybridization (aCGH) suffer from low resolution of genomic regions. Following the emergence of next generation sequencing (NGS) technologies, CNV detection methods based on the short read data have recently been developed. However, due to the relatively young age of the procedures, their performance is not fully understood. To help investigators choose suitable methods to detect CNVs, comparative studies are needed. We compared six publicly available CNV detection methods: CNV-seq, FREEC, readDepth, CNVnator, SegSeq and event-wise testing (EWT). They are evaluated both on simulated and real data with different experiment settings. The receiver operating characteristic (ROC) curve is employed to demonstrate the detection performance in terms of sensitivity and specificity, box plot is employed to compare their performances in terms of breakpoint and copy number estimation, Venn diagram is employed to show the consistency among these methods, and F-score is employed to show the overlapping quality of detected CNVs. The computational demands are also studied. The results of our work provide a comprehensive evaluation on the performances of the selected CNV detection methods, which will help biological investigators choose the best possible method.     

Next-Generation Sequencing of Aquatic Oligochaetes: Comparison of Experimental Communities

Aquatic oligochaetes are a common group of freshwater benthic invertebrates known to be very sensitive to environmental changes and currently used as bioindicators in some countries. However, more extensive application of oligochaetes for assessing the ecological quality of sediments in watercourses and lakes would require overcoming the difficulties related to morphology-based identification of oligochaetes species. This study tested the Next-Generation Sequencing (NGS) of a standard cytochrome c oxydase I (COI) barcode as a tool for the rapid assessment of oligochaete diversity in environmental samples, based on mixed specimen samples. To know the composition of each sample we Sanger sequenced every specimen present in these samples. Our study showed that a large majority of OTUs (Operational Taxonomic Unit) could be detected by NGS analyses. We also observed congruence between the NGS and specimen abundance data for several but not all OTUs. Because the differences in sequence abundance data were consistent across samples, we exploited these variations to empirically design correction factors. We showed that such factors increased the congruence between the values of oligochaetes-based indices inferred from the NGS and the Sanger-sequenced specimen data. The validation of these correction factors by further experimental studies will be needed for the adaptation and use of NGS technology in biomonitoring studies based on oligochaete communities.     

NeSSM: A Next-Generation Sequencing Simulator for Metagenomics

Background

Metagenomics can reveal the vast majority of microbes that have been missed by traditional cultivation-based methods. Due to its extremely wide range of application areas, fast metagenome sequencing simulation systems with high fidelity are in great demand to facilitate the development and comparison of metagenomics analysis tools.

Results

We present here a customizable metagenome simulation system: NeSSM (Next-generation Sequencing Simulator for Metagenomics). Combining complete genomes currently available, a community composition table, and sequencing parameters, it can simulate metagenome sequencing better than existing systems. Sequencing error models based on the explicit distribution of errors at each base and sequencing coverage bias are incorporated in the simulation. In order to improve the fidelity of simulation, tools are provided by NeSSM to estimate the sequencing error models, sequencing coverage bias and the community composition directly from existing metagenome sequencing data. Currently, NeSSM supports single-end and pair-end sequencing for both 454 and Illumina platforms. In addition, a GPU (graphics processing units) version of NeSSM is also developed to accelerate the simulation. By comparing the simulated sequencing data from NeSSM with experimental metagenome sequencing data, we have demonstrated that NeSSM performs better in many aspects than existing popular metagenome simulators, such as MetaSim, GemSIM and Grinder. The GPU version of NeSSM is more than one-order of magnitude faster than MetaSim.

Conclusions

NeSSM is a fast simulation system for high-throughput metagenome sequencing. It can be helpful to develop tools and evaluate strategies for metagenomics analysis and it’s freely available for academic users at http://cbb.sjtu.edu.cn/~ccwei/pub/software/NeSSM.php.     

Comparative Evaluation of DNA Extraction Methods from Feces of Multiple Host Species for Downstream Next-Generation Sequencing

The gastrointestinal tract contains a vast community of microbes that to this day remain largely unculturable, making studies in this area challenging. With the newly affordable advanced sequencing technology, important breakthroughs in this exciting field are now possible. However, standardized methods of sample collection, handling, and DNA extraction have yet to be determined. To help address this, we investigated the use of 5 common DNA extraction methods on fecal samples from 5 different species. Our data show that the method of DNA extraction impacts DNA concentration and purity, successful NGS amplification, and influences microbial communities seen in NGS output dependent on the species of fecal sample and the DNA extraction method used. These data highlight the importance of careful consideration of DNA extraction method used when designing and interpreting data from cross species studies.     

A Microfluidic DNA Library Preparation Platform for Next-Generation Sequencing

Next-generation sequencing (NGS) is emerging as a powerful tool for elucidating genetic information for a wide range of applications. Unfortunately, the surging popularity of NGS has not yet been accompanied by an improvement in automated techniques for preparing formatted sequencing libraries. To address this challenge, we have developed a prototype microfluidic system for preparing sequencer-ready DNA libraries for analysis by Illumina sequencing. Our system combines droplet-based digital microfluidic (DMF) sample handling with peripheral modules to create a fully-integrated, sample-in library-out platform. In this report, we use our automated system to prepare NGS libraries from samples of human and bacterial genomic DNA. E. coli libraries prepared on-device from 5 ng of total DNA yielded excellent sequence coverage over the entire bacterial genome, with >99% alignment to the reference genome, even genome coverage, and good quality scores. Furthermore, we produced a de novo assembly on a previously unsequenced multi-drug resistant Klebsiella pneumoniae strain BAA-2146 (KpnNDM). The new method described here is fast, robust, scalable, and automated. Our device for library preparation will assist in the integration of NGS technology into a wide variety of laboratories, including small research laboratories and clinical laboratories.     

The Performance of Whole Genome Amplification Methods and Next-Generation Sequencing for Pre-Implantation Genetic Diagnosis of Chromosomal Abnormalities

Reliable and accurate pre-implantation genetic diagnosis(PGD) of patient’s embryos by next-generation sequencing(NGS) is dependent on efficient whole genome amplification(WGA) of a representative biopsy sample. However, the performance of the current state of the art WGA methods has not been evaluated for sequencing. Using low template DNA(15 pg) and single cells, we showed that the two PCR-based WGA systems Sure Plex and MALBAC are superior to the REPLI-g WGA multiple displacement amplification(MDA) system in terms of consistent and reproducible genome coverage and sequence bias across the 24 chromosomes, allowing better normalization of test to reference sequencing data. When copy number variation sequencing(CNV-Seq) was applied to single cell WGA products derived by either Sure Plex or MALBAC amplification, we showed that known disease CNVs in the range of 3e15 Mb could be reliably and accurately detected at the correct genomic positions. These findings indicate that our CNV-Seq pipeline incorporating either Sure Plex or MALBAC as the key initial WGA step is a powerful methodology for clinical PGD to identify euploid embryos in a patient’s cohort for uterine transplantation.     

芯片数据标准化方法比较研究

在基因芯片实验中,基因表达水平之间的相关性在推断基因间相互关系时起到非常重要的作用.未经标准化处理的芯片数据基因之间往往都呈现出很强的相关性,这些高相关性一部分是由基因表达水平变化引起的,而另外一部分是由系统偏差引起的.对芯片数据进行标准化处理的目的之一是消除系统偏差引起的高相关性,同时保留由真正生物学原因引起的基因表达水平高相关性.虽然目前对标准化方法已经有了不少比较研究,但还较少有人研究标准化方法对基因之间相关系数的影响,以及哪种方法最有利于恢复基因之间的相关性结构.通过对基因表达水平数据的模拟,具体比较了几种常用标准化方法的效果,从而给出最有利于恢复基因之间相关性结构的那种标准化方法.     

The Accuracy,Feasibility and Challenges of Sequencing Short Tandem Repeats Using Next-Generation Sequencing Platforms

To date we have little knowledge of how accurate next-generation sequencing (NGS) technologies are in sequencing repetitive sequences beyond known limitations to accurately sequence homopolymers. Only a handful of previous reports have evaluated the potential of NGS for sequencing short tandem repeats (microsatellites) and no empirical study has compared and evaluated the performance of more than one NGS platform with the same dataset. Here we examined yeast microsatellite variants from both long-read (454-sequencing) and short-read (Illumina) NGS platforms and compared these to data derived through Sanger sequencing. In addition, we investigated any locus-specific biases and differences that might have resulted from variability in microsatellite repeat number, repeat motif or type of mutation. Out of 112 insertion/deletion variants identified among 45 microsatellite amplicons in our study, we found 87.5% agreement between the 454-platform and Sanger sequencing in frequency of variant detection after Benjamini-Hochberg correction for multiple tests. For a subset of 21 microsatellite amplicons derived from Illumina sequencing, the results of short-read platform were highly consistent with the other two platforms, with 100% agreement with 454-sequencing and 93.6% agreement with the Sanger method after Benjamini-Hochberg correction. We found that the microsatellite attributes copy number, repeat motif and type of mutation did not have a significant effect on differences seen between the sequencing platforms. We show that both long-read and short-read NGS platforms can be used to sequence short tandem repeats accurately, which makes it feasible to consider the use of these platforms in high-throughput genotyping. It appears the major requirement for achieving both high accuracy and rare variant detection in microsatellite genotyping is sufficient read depth coverage. This might be a challenge because each platform generates a consistent pattern of non-uniform sequence coverage, which, as our study suggests, may affect some types of tandem repeats more than others.     

Targeted Next-Generation Sequencing for Clinical Diagnosis of 561 Mendelian Diseases

BackgroundTargeted next-generation sequencing (NGS) is a cost-effective approach for rapid and accurate detection of genetic mutations in patients with suspected genetic disorders, which can facilitate effective diagnosis.Conclusions/SignificanceResults of the evaluation showed that targeted NGS enabled to detect disease-causing mutations with high accuracy, stability, speed and throughput. Thus, the technology can be used for the clinical diagnosis of 561 Mendelian diseases.     

Performance Comparison of Illumina and Ion Torrent Next-Generation Sequencing Platforms for 16S rRNA-Based Bacterial Community Profiling

High-throughput sequencing of the taxonomically informative 16S rRNA gene provides a powerful approach for exploring microbial diversity. Here we compare the performances of two common “benchtop” sequencing platforms, Illumina MiSeq and Ion Torrent Personal Genome Machine (PGM), for bacterial community profiling by 16S rRNA (V1-V2) amplicon sequencing. We benchmarked performance by using a 20-organism mock bacterial community and a collection of primary human specimens. We observed comparatively higher error rates with the Ion Torrent platform and report a pattern of premature sequence truncation specific to semiconductor sequencing. Read truncation was dependent on both the directionality of sequencing and the target species, resulting in organism-specific biases in community profiles. We found that these sequencing artifacts could be minimized by using bidirectional amplicon sequencing and an optimized flow order on the Ion Torrent platform. Results of bacterial community profiling performed on the mock community and a collection of 18 human-derived microbiological specimens were generally in good agreement for both platforms; however, in some cases, results differed significantly. Disparities could be attributed to the failure to generate full-length reads for particular organisms on the Ion Torrent platform, organism-dependent differences in sequence error rates affecting classification of certain species, or some combination of these factors. This study demonstrates the potential for differential bias in bacterial community profiles resulting from the choice of sequencing platform alone.     

AmpliconDuo: A Split-Sample Filtering Protocol for High-Throughput Amplicon Sequencing of Microbial Communities

High throughput sequencing (HTSeq) of small ribosomal subunit amplicons has the potential for a comprehensive characterization of microbial community compositions, down to rare species. However, the error-prone nature of the multi-step experimental process requires that the resulting raw sequences are subjected to quality control procedures. These procedures often involve an abundance cutoff for rare sequences or clustering of sequences, both of which limit genetic resolution. Here we propose a simple experimental protocol that retains the high genetic resolution granted by HTSeq methods while effectively removing many low abundance sequences that are likely due to PCR and sequencing errors. According to this protocol, we split samples and submit both halves to independent PCR and sequencing runs. The resulting sequence data is graphically and quantitatively characterized by the discordance between the two experimental branches, allowing for a quick identification of problematic samples. Further, we discard sequences that are not found in both branches (“AmpliconDuo filter”). We show that the majority of sequences removed in this way, mostly low abundance but also some higher abundance sequences, show features expected from random modifications of true sequences as introduced by PCR and sequencing errors. On the other hand, the filter retains many low abundance sequences observed in both branches and thus provides a more reliable census of the rare biosphere. We find that the AmpliconDuo filter increases biological resolution as it increases apparent community similarity between biologically similar communities, while it does not affect apparent community similarities between biologically dissimilar communities. The filter does not distort overall apparent community compositions. Finally, we quantitatively explain the effect of the AmpliconDuo filter by a simple mathematical model.     

MuA-based Molecular Indexing for Rare Mutation Detection by Next-Generation Sequencing

Detection of low-frequency mutations in cancer genomes or other heterogeneous cell populations requires high-fidelity sequencing. Molecular barcoding is one of the key technologies that enables the differentiation of true mutations from errors, which can be caused by sequencing or library preparation processes. However, current approaches where barcodes are introduced via primer extension or adaptor ligation do not utilize the full power of barcoding, due to complicated library preparation workflows and biases. Here we demonstrate the remarkable tolerance of MuA transposase to the presence of multiple replacements in transposon sequence, and explore this unique feature to engineer the MuA transposome complex with randomised nucleotides in 12 transposon positions, which can be introduced as a barcode into the target molecule after transposition event. We applied the approach of Unique MuA-based Molecular Indexing (UMAMI) to assess the power of rare mutation detection by shortgun sequencing on the Illumina platform. Our results show that UMAMI allows detection of rare mutations readily and reliably, and in this paper we report error rate values for the number of thermophilic DNA polymerases measured by using UMAMI.