Target accessibility and signal specificity in live-cell detection of BMP-4 mRNA using molecular beacons

The ability to visualize mRNA in single living cells and monitor in real-time the changes of mRNA level and localization can provide unprecedented opportunities for biological and disease studies. However, the mRNA detection specificity and sensitivity are critically dependent on the selection of target sequences and their accessibility. We carried out an extensive study of the target accessibility of BMP-4 mRNA using 10 different designs of molecular beacons (MBs), and identified the optimal beacon design. Specifically, for MB design 1 and 8 (MB1 and MB8), the fluorescent intensities from BMP-4 mRNA correlated well with the GFP signal after upregulating BMP-4 and co-expressing GFP using adenovirus, and the knockdown of BMP-4 mRNA using siRNA significantly reduced the beacon signals, demonstrating detection specificity. The beacon specificity was further confirmed using blocking RNA and in situ hybridization. We found that fluorescence signal from MBs depends critically on target sequences; the target sequences corresponding to siRNA sites may not be good sites for beacon-based mRNA detection, and vice versa. Possible beacon design rules are identified and approaches for enhancing target accessibility are discussed. This has significant implications to MB design for live cell mRNA detection.     

A novel electrochemical detection method for aptamer biosensors

A beacon aptamer-based biosensor for the detection of thrombin was developed using electrochemical transduction method. Gold surface was modified with a beacon aptamer covalently linked at 5'-terminus with a linker containing a primary aliphatic amine. Methylene blue (MB) was intercalated into the beacon sequence, and used as an electrochemical marker. When the beacon aptamer immobilized on gold surface encounters thrombin, the hairpin forming beacon aptamer is conformationally changed to release the intercalated MB, resulting a decrease in electrical current intensity in voltamogram. The peak signal of the MB is clearly decreased by the binding of thrombin onto the beacon aptamer. The linear range of the signal was observed between 0 and 50.8 nM of thrombin with 0.999 correlation factor. This method was able to linearly and selectively detect thrombin with a detection limit of 11 nM.     

Detection of C677T mutation of MTHFR in subject with coronary heart disease by hairpin probe with enzymatic color on microarray

Molecular beacon (MB) is especially suited for detection of single nucleotide polymorphism (SNP), and the type of MB immobilized on the surface of microarray in particular, may detect multi-sample and multi-locus. However, the majority of MB needs to be labeled with fluorescence and quenching molecules on the two ends of the probe, and observed the reaction of fluorescence or complicated electrochemical signal produced hybridization of MB and target sequence by complex and expensive instruments. The "molecular beacon" and microarray designed appropriately in our study can produce visible light response signal induced by amplification effect of enzymatic color, and are avoided with the marker of fluorescence and quenching molecules and expensive instruments. The "molecular beacon" without fluorescence and quenching molecules is entitled as "hairpin DNA probe" by us for only the "hairpin" structure of traditional molecular beacon is adopted. The merits of two techniques, molecular beacon and amplification effect of enzymatic color, are successfully combined, and the technique is simple, sensitive and specific, to detect and compare the methylenetetrahydrofolate reductase (MTHFR) Gene C677T mutation of subjects between coronary heart disease (CHD) and control group. The results showed that MTHFR Gene C677T polymorphism is an independent risk factor for CHD.     

Molecular beacons for DNA biosensors with micrometer to submicrometer dimensions

Ultrasensitive molecular beacon (MB) DNA biosensors, with micrometer to submicrometer sizes, have been developed for DNA/RNA analysis. The fluorescence-based biosensors have been applied in DNA/ RNA detection without the need for a dye-labeled target molecule or an intercalation reagent in the testing solution. Molecular beacons are hairpin-shaped oligonucleotides that report the presence of specific nucleic acids. We have designed a surface-immobilizable biotinylated ssDNA molecular beacon for DNA hybridization at a liquid-solid interface. The MBs have been immobilized onto ultrasmall optical fiber probes through avidin-biotin binding. The MB DNA biosensor has been used directly to detect, in real time, its target DNA molecules without the need for a competitive assay. The biosensor is stable and reproducible. The MB DNA biosensor has selectivity with single base-pair mismatch identification capability. The concentration detection limits and mass detection limits are 0.3 nM and 15 amol for a 105-microm biosensor, and 10 nM and 0.27 amol for a submicrometer biosensor, respectively. We have also prepared molecular beacon DNA biosensor arrays for simultaneous analysis of multiple DNA sequences in the same solution. The newly developed DNA biosensors have been used for the precise quantification of a specific rat gamma-actin mRNA sequence amplified by the polymerase chain reaction.     

Sensitivity comparison of real-time PCR probe designs on a model DNA plasmid

We investigated three probe design strategies used in quantitative polymerase chain reaction (PCR) for sensitivity in detection of the PCR amplicon. A plasmid with a 120-bp insert served as the DNA template. The probes were TaqMan, conventional molecular beacon (MB), and shared-stem molecular beacon (ATssMB and GCssMB). A shared-stem beacon probe combines the properties of a TaqMan probe and a conventional molecular beacon. It was found that the overall sensitivities for the four PCR probes are in the order of MB>ATssMB>GCssMB>TaqMan. The fluorescence quantum yield measurements indicate that incomplete or partial enzymatic cleavage catalyzed by Taq polymerase is the likely cause of the low sensitivities of two shared-stem beacons when compared with the conventional beacon probe. A high-fluorescence background associated with the current TaqMan probe sequence contributes to the relatively low detection sensitivity and signal-to-background ratio. The study points out that the nucleotide environment surrounding the reporting fluorophore can strongly affect the probe performance in real-time PCR.     

A versatile graphene-based fluorescence "on/off" switch for multiplex detection of various targets

We have designed a versatile molecular beacon (MB)-like probe for the multiplex sensing of targets such as sequence-specific DNA, protein, metal ions and small molecule compounds based on the self-assembled ssDNA-graphene oxide (ssDNA-GO) architecture. The probe employs fluorescence "on/off" switching strategy in a single step in homogeneous solution. Compared to traditional molecular beacons, the proposed design is simple to prepare and manipulate and has little background interference, but still gives superior sensitivity and rapid response. More importantly, this ssDNA-GO architecture can serve as a universal beacon platform by simply changing the types of ssDNA sequences for the different targets. In this work, the ssDNA-GO architecture probe has been successfully applied in the multiplex detection of sequence-specific DNA, thrombin, Ag(+), Hg(2+) and cysteine, and the limit of detection was 1 nM, 5 nM, 20 nM, 5.7 nM and 60 nM, respectively. The results demonstrate that the ssDNA-GO architecture can be an excellent and versatile platform for sensing multiplex analytes, easily replacing the universal molecular beacon.     

Molecular-beacon-based array for sensitive DNA analysis

Molecular beacon (MB) DNA probes provide a new way for sensitive label-free DNA/protein detection in homogeneous solution and biosensor development. However, a relatively low fluorescence enhancement after the hybridization of the surface-immobilized MB hinders its effective biotechnological applications. We have designed new molecular beacon probes to enable a larger separation between the surface and the surface-bound MBs. Using these MB probes, we have developed a DNA array on avidin-coated cover slips and have improved analytical sensitivity. A home-built wide-field optical setup was used for imaging the array. Our results show that linker length, pH, and ionic strength have obvious effects on the performance of the surface-bound MBs. The fluorescence enhancement of the new MBs after hybridization has been increased from 2 to 5.5. The MB-based DNA array could be used for DNA detection with high sensitivity, enabling simultaneous multiple-target bioanalysis in a variety of biotechnological applications.     

Probe design rules and effective enzymes for endonuclease-based detection of nucleic acids

Junction probe (JP) platform is an isothermal endonuclease-based detection assay for both RNA and DNA. Herein, we screen 31 REAse and identify effective restriction endonucleases that can be used for JP detection. Secondly, we investigate how different probe architectures affect JP cleavage rates and conclude that although molecular beacon (MB) JP probes give less background noise than linear JP probes, the cleavage of MB JP probes are slower than linear JP probes.     

An OR logic gate based on two molecular beacons

Design of elementary molecular logic gates is the key and the fundamental of performing complicated Boolean calculations. Herein, we report a strategy for constructing a DNA-based OR gate by using the mechanism of sequence recognition and the principle of fluorescence resonance energy transfer (FRET). In this system, the gate is entirely composed of a single strand of DNA (A, B and C) and the inputs are the molecular beacon probes (MB1 and MB2). Changes in fluorescence intensity confirm the realization of the OR logic operation and electrophoresis experiments verify these results. Our successful application of DNA to perform the binary operation represents that DNA can serve as an efficient biomaterial for designing molecular logic gates and devices.     

BMN 673 (talazoparib): A potent PARP inhibitor for triple negative breast cancer with different genetic profile

The objective of the present study was to elucidate the effect of BMN 673 (talozoparib) on BRCA1 mutant (HCC1937) and wild‐type (MDA‐MB‐231) triple negative breast cancer (TNBC). The in vitro cytotoxicity results indicated that BMN 673 had considerable inhibitory effects on HCC1937 and MDA‐MB‐231 cell lines by inducing apoptosis, multicaspase activity, G2/M arrest, and altering the expression levels of apoptosis‐related genes (P < 0.01). Additionally, BMN 673 indicated no toxicity on MCF‐10A control cells until a certain concentration and incubation time. However, BMN 673, a novel and selective poly ADP ribose polymerase inhibitor, was more potent in TNBC cells bearing BRCA1 mutant than those with wild‐type BRCA1. In conclusion, our study, for the first time, demonstrated a molecular mechanism of the induction of apoptosis by BMN 673 in TNBC with different genetic profile. However, further investigations regarding the exact molecular mechanisms underlying BMN 673‐inducing apoptotic death and gene‐cell line associations are required.     

分子信标DNA计算模型的研究进展与展望

由于分子信标具有结构简单,灵敏度高及反应迅速等优点,因此,利用分子信标进行数学问题的求解将成为可能.通过对分子信标的计算模型进行详细的介绍,并对分子信标的计算模型的研究思路进行了展望,据此思路,可以建立多种组合优化问题及逻辑门的分子信标计算模型.     

Enzymatic amplification detection of DNA based on "molecular beacon" biosensors

We described a novel electrochemical DNA biosensor based on molecular beacon (MB) probe and enzymatic amplification protocol. The MB modified with a thiol at its 5' end and a biotin at its 3' end was immobilized on the gold electrode through mixed self-assembly process. Hybridization events between MB and target DNA cause the conformational change of the MB, triggering the attached biotin group on the electrode surface. Following the specific interaction between the conformation-triggered biotin and streptavidin-horseradish peroxidase (HRP), subsequent quantification of DNA was realized by electrochemical detection of enzymatic product in the presence of substrate. The detection limit is obtained as low as 0.1nM. The presented DNA biosensor has good selectivity, being able to differentiate between a complementary target DNA sequence and one containing G-G single-base mismatches.     

Sub-femtomolar electrochemical detection of DNA using surface circular strand-replacement polymerization and gold nanoparticle catalyzed silver deposition for signal amplification

A highly sensitive method was developed for detection of target DNA. This method combined circular strand-displacement polymerization (CSRP) with silver enhancement to achieve dual signal amplification. After molecular beacon (MB) hybridized with target DNA, the reporter gold nanoparticle (Au NPs) was attached to an electrode surface by hybridization between Au NP labeled primer and stem part of the MB to initiate a polymerization of DNA strand, which led to the release of target and another polymerization cycle. Thus the CSRP produced the multiplication of target-related reporter Au NPs on the surface. The Au NPs then catalyzed silver deposition for subsequent stripping analysis of silver. The dual signal amplification offered a dramatic enhancement of the stripping response. This signal could discriminate perfect matched target DNA from 1-base mismatch DNA. The dynamic range of the sequence-specific DNA detection was from 10(-16) to 10(-12)molL(-1) with a detection limit down to sub-femtomolar level. This proposed method exhibited an efficient amplification performance, and would open new opportunities for sensitive detection of other biorecognition events.     

Pyrene-labeled deoxyguanosine as a fluorescence sensor to discriminate single and double stranded DNA structures: Design of ends free molecular beacons

A novel fluorescent DNA probe containing pyrene-labeled C8 alkylamino-substituted 2′-deoxyguanosine was designed in order to discriminate single stranded and double stranded regions in DNA. This fluorescent sensor was used for the design of practically useful 3′- and 5′-ends free self-quenched molecular beacon (MB). Unique MB detectable by pyrene excimer fluorescence was also demonstrated.     

Target discrimination by surface-immobilized molecular beacons designed to detect Francisella tularensis

A molecular beacon (MB) array was designed based on unique regions of the 16S rRNA of the bacterium Francisella tularensis. Nucleic acid molecular beacons undergo a spontaneous fluorogenic conformational change when they hybridize to specific complementary targets. The array was printed on aldehyde glass or hydrogel slides and evaluated for functioning in presence of complementary oligonucleotide sequences, single-nucleotide mismatch sequences and multiple nucleotide mismatch sequences. Discriminating true target from mismatched targets was found to be dependent on type, number, and location of mismatches within the beacon (i.e. located in the stem or loop regions). Optimal conditions for molecular beacon deposition, and target hybridization were determined for oligonucleotide target mismatch discrimination. The beacon array was stable upon recharging by exposure to an alkaline solution, and repeatedly used. In addition, performance of the beacon array biosensor was compared with molecular beacons in homogeneous solution.     

A molecular beacon DNA microarray system for rapid detection of E. coli O157:H7 that eliminates the risk of a false negative signal

A DNA hybridization based optical detection platform for the detection of foodborne pathogens has been developed with virtually zero probability of the false negative signal. This portable, low-cost and real-time assaying detection platform utilizes the color changing molecular beacon as a probe for the optical detection of the target sequence. The computer-controlled detection platform exploits the target hybridization induced change of fluorescence color due to the F?rster (fluorescence) resonance energy transfer (FRET) between a pair of spectrally shifted fluorophores conjugated to the opposite ends of a beacon (oligonucleotide probe). Unlike the traditional fluorophore-quencher beacon design, the presence of two fluorescence molecules allows to actively visualize both hybridized and unhybridized states of the beacon. This eliminates false negative signal detection characteristic for the fluorophore-quencher beacon where bleaching of the fluorophore or washout of a beacon is indistinguishable from the absence of the target DNA sequence. In perspective, the two-color design allows also to quantify the concentration of the target DNA in a sample down to < =1 ng/microl. The new design is suitable for simultaneous reliable detection of hundreds of DNA target sequences in one test run using a series of beacons immobilized on a single substrate in a spatial format.     

Cholesterol-linked fluorescent molecular beacons with enhanced cell permeability

We appended pyrene units covalently onto adenosine (forming A(P) units) and then incorporated them into oligonucleotides such that they were positioned in complementary locations in opposite strands in the middle positions of hairpin stems. System 1 (A(P)A(P)) behaves as an effective molecular beacon (MB) that changes color from green to blue upon duplex formation. In addition, we attached a cholesterol unit to a free terminus of one of these hairpins; this approach enhanced the cellular delivery of the modified MB relative to those encountered when using conventional transfection methods. These structurally simple cholesterol-based MB systems, which can be synthesized very efficiently, have good potential for opening up new and exciting opportunities in the field of in vivo biosensors.     

A universal amplified strategy for aptasensors: Enhancing sensitivity through allostery-triggered enzymatic recycling amplification

A universal amplified sensing strategy based on endonuclease was developed for designing fluorescence aptasensors. By employing hairpin-structured design for both recognition and reporter probes to decrease background signal, and a nicking endonuclease to perform target-triggered enzymatic recycling amplification, the proposed biosensor showed high sensitivity to target protein. To demonstrate the feasibility of the design, immunoglobulin E (IgE) was studied as a model target. Upon the addition of target protein, the specific formation of IgE/aptamer complex induced the releasing of the 37-mer fragment which partially hybridized with the molecular beacon (MB) probe. In the presence of endonuclease Nt.BbvCI, the MB was cleaved into two parts. Then, the released 37-mer fragment hybridized with another MB, and triggered the second cycle of cleavage, leading to an accumulation of fluorescence signals. Under the optimal conditions, a detection limit of 5pM was obtained. The proposed sensing system was used for detection of IgE in complex biological samples with satisfactory results.     

Y-shaped probe for convenient and label-free detection of microRNA-21 in vitro

A simple, highly selective, and label-free microRNA (miRNA) detection method based on l-alanine-reduced graphene oxide fluorescence quenching with a Y-shaped probe is proposed. The Y-shaped probe was synthesized by silver nitrate and a cytosine-rich molecular beacon (MB) in two terminals through sodium borohydride reduction, which generated a stronger fluorescent signal than ordinary DNA-templated silver nanoclusters (AgNCs). Meanwhile, the Y-shaped probe contained a single-stranded loop structure, which could be superbly adsorbed onto the surface of reduced graphene oxide (RGO) via π–π stacking interaction, and this special structure of the probe was designed to improve its sensitivity and selectivity. In addition, the quenching capacities of graphene oxide (GO) and RGO were compared in this research. The strong interaction between nucleobases of the loop structure and RGO nanosheet made the MB-AgNCs-RGO system exhibit minimal background fluorescence. In the presence of miRNA-21, the loop structure of the Y-shaped probe can hybridize with target miRNA-21; the molecular beacon encapsulated probe is far away from RGO surface and produces a detectable signal. The MB-AgNCs based approach provides a label-free avenue to detect miRNA with high selectivity and good reproducibility, which has a promising application in early clinical diagnosis and biomedical research.