Transmembrane helices of membrane proteins may flex to satisfy hydrophobic mismatch

A novel mechanism for membrane modulation of transmembrane protein structure, and consequently function, is suggested in which mismatch between the hydrophobic surface of the protein and the hydrophobic interior of the lipid bilayer induces a flexing or bending of a transmembrane segment of the protein. Studies on model hydrophobic transmembrane peptides predict that helices tilt to submerge the hydrophobic surface within the lipid bilayer to satisfy the hydrophobic effect if the helix length exceeds the bilayer width. The hydrophobic surface of transmembrane helix 1 (TM1) of lactose permease, LacY, is accessible to the bilayer, and too long to be accommodated in the hydrophobic portion of a typical lipid bilayer if oriented perpendicular to the membrane surface. Hence, nuclear magnetic resonance (NMR) data and molecular dynamics simulations show that TM1 from LacY may flex as well as tilt to satisfy the hydrophobic mismatch with the bilayer. In an analogous study of the hydrophobic mismatch of TM7 of bovine rhodopsin, similar flexing of the transmembrane segment near the conserved NPxxY sequence is observed. As a control, NMR data on TM5 of lacY, which is much shorter than TM1, show that TM5 is likely to tilt, but not flex, consistent with the close match between the extent of hydrophobic surface of the peptide and the hydrophobic thickness of the bilayer. These data suggest mechanisms by which the lipid bilayer in which the protein is embedded modulates conformation, and thus function, of integral membrane proteins through interactions with the hydrophobic transmembrane helices.     

Transmembrane helices of membrane proteins may flex to satisfy hydrophobic mismatch

A novel mechanism for membrane modulation of transmembrane protein structure, and consequently function, is suggested in which mismatch between the hydrophobic surface of the protein and the hydrophobic interior of the lipid bilayer induces a flexing or bending of a transmembrane segment of the protein. Studies on model hydrophobic transmembrane peptides predict that helices tilt to submerge the hydrophobic surface within the lipid bilayer to satisfy the hydrophobic effect if the helix length exceeds the bilayer width. The hydrophobic surface of transmembrane helix 1 (TM1) of lactose permease, LacY, is accessible to the bilayer, and too long to be accommodated in the hydrophobic portion of a typical lipid bilayer if oriented perpendicular to the membrane surface. Hence, nuclear magnetic resonance (NMR) data and molecular dynamics simulations show that TM1 from LacY may flex as well as tilt to satisfy the hydrophobic mismatch with the bilayer. In an analogous study of the hydrophobic mismatch of TM7 of bovine rhodopsin, similar flexing of the transmembrane segment near the conserved NPxxY sequence is observed. As a control, NMR data on TM5 of lacY, which is much shorter than TM1, show that TM5 is likely to tilt, but not flex, consistent with the close match between the extent of hydrophobic surface of the peptide and the hydrophobic thickness of the bilayer. These data suggest mechanisms by which the lipid bilayer in which the protein is embedded modulates conformation, and thus function, of integral membrane proteins through interactions with the hydrophobic transmembrane helices.     

Alignment of lysine-anchored membrane peptides under conditions of hydrophobic mismatch: a CD, 15N and 31P solid-state NMR spectroscopy investigation

The secondary structure and alignment of hydrophobic model peptides in phosphatidylcholine membranes were investigated as a function of hydrophobic mismatch by CD and oriented proton-decoupled (15)N solid-state NMR spectroscopies. In addition, the macroscopic phase and the orientational order of the phospholipid headgroups was analyzed by proton-decoupled (31)P NMR spectroscopy. Both, variations in the composition of the polypeptide (10-30 hydrophobic residues) as well as the fatty acid acyl chain of the phospholipid (10-22 carbons) were studied. At lipid-to-peptide ratios of 50, the peptides adopt helical conformations and bilayer macroscopic phases are predominant. The peptide and lipid maintain much of their orientational order even when the peptide is calculated to be 3 A too short or 14 A too long to fit into the pure lipid bilayer. A continuous decrease in the (15)N chemical shift obtained from transmembrane peptides in oriented membranes suggests an increasing helical tilt angle when the membrane thickness is reduced. This response is, however, insufficient to account for the full hydrophobic mismatch. When the helix is much too long to span the membrane, both the lipid and the peptide order are perturbed, an indication of changes in the macroscopic properties of the membrane. In contrast, sequences that are much too short show little effect on the phospholipid headgroup order, but the peptides exhibit a wide range of orientational distributions predominantly close to parallel to the membrane surface. A thermodynamic formalism is applied to describe the two-state equilibrium between in-plane and transmembrane peptide orientations.     

Structural analysis of synthetic peptide fragments from EmrE,a multidrug resistance protein,in a membrane-mimetic environment

EmrE, a multidrug resistance protein from Escherichia coli, renders the bacterium resistant to a variety of cytotoxic drugs by active translocation out of the cell. The 110-residue sequence of EmrE limits the number of structural possibilities that can be envisioned for this membrane protein. Four helix bundle models have been considered [Yerushalmi, H., Lebendiker, M., and Schuldiner, S. (1996) J. Biol. Chem. 271, 31044-31048]. The validity of EmrE structural models has been probed experimentally by investigations on overlapping peptides (ranging in length from 19 to 27 residues), derived from the sequence of EmrE. The choice of peptides was made to provide sequences of two complete, predicted transmembrane helices (peptides H1 and H3) and two helix-loop-helix motifs (peptides A and B). Peptide (B) also corresponds to a putative hairpin in a speculative beta-barrel model, with the "Pro-Thr-Gly" segment forming a turn. Structure determination in SDS micelles using NMR indicates peptide H1 to be predominantly helical, with helix boundaries in the micellar environment corroborating predicted helical limits. Peptide A adopts a helix-loop-helix structure in SDS micelles, and peptide B was also largely helical in micellar environments. An analogue peptide, C, in which the central "Pro-Thr-Gly" was replaced by "(D)Pro-Gly" displays local turn conformation at the (D)Pro-Gly segment, but neither a continuous helical stretch nor beta-hairpin formation was observed. This study implies that the constraints of membrane and micellar environments largely direct the structure of transmembrane peptides and proteins and study of judiciously selected peptide fragments can prove useful in the structural elucidation of membrane proteins.     

Anti-apoptotic Bcl-XL protein in complex with BH3 peptides of pro-apoptotic Bak, Bad, and Bim proteins: comparative molecular dynamics simulations

The Bcl-2 family of proteins plays a central role in the regulation of mitochondrial outer-membrane permeabilization, a critical step in apoptosis. Heterodimerization between the pro- and anti-apoptotic members of Bcl-2 family is a key event in this process. Anti-apoptotic proteins have high levels of expression in many cancers and they have different affinities for different pro-apoptotic proteins. Experimentally determined structures of all members of Bcl-2 proteins have remarkably similar helical fold despite poor amino acid sequence identity. Peptides representing BH3 region of pro-apoptotic proteins have been shown to bind the hydrophobic cleft of anti-apoptotic proteins and this segment is responsible in modulating the apoptotic pathways in living cells. Understanding the molecular basis of protein-protein recognition is required to develop inhibitors specific to a particular anti-apoptotic protein. We have carried out molecular dynamics simulations on the anti-apoptotic Bcl-X(L) protein in complex with three different BH3 peptides derived from pro-apoptotic Bak, Bad and Bim proteins. Each complex structure was simulated for a period of 50 ns after 2.5 ns equilibration. Analysis of the simulation results showed that in the Bcl-X(L) protein, the helix containing the BH3 region is more flexible than other helices in all three simulations. A network of strong hydrophobic interactions exists between four of the six helices and they contribute significantly to the stability of this helix bundle protein. Analysis of Bcl-X(L)-BH3 peptide interactions reveals the role of loop residues in the protein-peptide interactions in all three simulations. Bad and Bim peptides maintain strong hydrophobic and hydrophilic interactions with the helix preceding the central hydrophobic helix. Residues from this helix interact with an Arg residue in Bad and Bim peptides. This Arg residue is next to the conserved Leu residue and is replaced by Ala in Bak. Absence of these interactions and the helix propensity are likely to be the cause for Bak peptide's weaker binding affinity with the Bcl-X(L) protein. The results of this study have implications in the design of Bcl-X(L)-specific inhibitors.     

Crystal structure of the soluble form of equinatoxin II, a pore-forming toxin from the sea anemone Actinia equina

BACKGROUND: Membrane pore-forming toxins have a remarkable property: they adopt a stable soluble form structure, which, when in contact with a membrane, undergoes a series of transformations, leading to an active, membrane-bound form. In contrast to bacterial toxins, no structure of a pore-forming toxin from an eukaryotic organism has been determined so far, an indication that structural studies of equinatoxin II (EqtII) may unravel a novel mechanism. RESULTS: The crystal structure of the soluble form of EqtII from the sea anemone Actinia equina has been determined at 1.9 A resolution. EqtII is shown to be a single-domain protein based on a 12 strand beta sandwich fold with a hydrophobic core and a pair of alpha helices, each of which is associated with the face of a beta sheet. CONCLUSIONS: The structure of the 30 N-terminal residues is the largest segment that can adopt a different structure without disrupting the fold of the beta sandwich core. This segment includes a three-turn alpha helix that lies on the surface of a beta sheet and ends in a stretch of three positively charged residues, Lys-30, Arg-31, and Lys-32. On the basis of gathered data, it is suggested that this segment forms the membrane pore, whereas the beta sandwich structure remains unaltered and attaches to a membrane as do other structurally related extrinsic membrane proteins or their domains. The use of a structural data site-directed mutagenesis study should reveal the residues involved in membrane pore formation.     

Topography of helices 5-7 in membrane-inserted diphtheria toxin T domain: identification and insertion boundaries of two hydrophobic sequences that do not form a stable transmembrane hairpin

The T domain of diphtheria toxin undergoes a low pH-induced conformational change that allows it to penetrate cell membranes. T domain hydrophobic helices 8 and 9 can adopt two conformations, one close to the membrane surface (P state) and a second in which they apparently form a transmembrane hairpin (TM state). We have now studied T domain helices 5-7, a second cluster of hydrophobic helices, using Cys-scanning mutagenesis. After fluorescently labeling a series of Cys residues, penetration into a non-polar environment, accessibility to externally added antibodies, and relative depth in the bilayer were monitored. It was found that helices 5-7 insert shallowly in the P state and deeply in the TM state. Thus, the conformational changes in helices 5-7 are both similar and somehow linked to those in helices 8 and 9. The boundaries of deeply inserting sequences were also identified. One deeply inserted segment was found to span residues 270 to 290, which overlaps helix 5, and a second spanned residues 300 to 320, which includes most of helix 6 and all of helix 7. This indicates that helices 6 and 7 form a continuous hydrophobic segment despite their separation by a Pro-containing kink. Additionally, it is found that in the TM state some residues in the hydrophilic loop between helices 5 and 6 become more highly exposed than they are in the P state. Their exposure to external solution in the TM state indicates that helices 5-7 do not form a stable transmembrane hairpin. However, helix 5 and/or helices 6 plus 7 could form transmembrane structures that are in equilibrium with non-transmembrane states, or be kinetically prevented from forming a transmembrane structure. How helices 5-7 might influence the mechanism by which the T domain aids translocation of the diphtheria toxin A chain across membranes is discussed.     

Structures of the transmembrane helices of the G-protein coupled receptor, rhodopsin.

An hypothesis is tested that individual peptides corresponding to the transmembrane helices of the membrane protein, rhodopsin, would form helices in solution similar to those in the native protein. Peptides containing the sequences of helices 1, 4 and 5 of rhodopsin were synthesized. Two peptides, with overlapping sequences at their termini, were synthesized to cover each of the helices. The peptides from helix 1 and helix 4 were helical throughout most of their length. The N- and C-termini of all the peptides were disordered and proline caused opening of the helical structure in both helix 1 and helix 4. The peptides from helix 5 were helical in the middle segment of each peptide, with larger disordered regions in the N- and C-termini than for helices 1 and 4. These observations show that there is a strong helical propensity in the amino acid sequences corresponding to the transmembrane domain of this G-protein coupled receptor. In the case of the peptides from helix 4, it was possible to superimpose the structures of the overlapping sequences to produce a construct covering the whole of the sequence of helix 4 of rhodopsin. As similar superposition for the peptides from helix 1 also produced a construct, but somewhat less successfully because of the disordering in the region of sequence overlap. This latter problem was more severe for helix 5 and therefore a single peptide was synthesized for the entire sequence of this helix, and its structure determined. It proved to be helical throughout. Comparison of all these structures with the recent crystal structure of rhodopsin revealed that the peptide structures mimicked the structures seen in the whole protein. Thus similar studies of peptides may provide useful information on the secondary structure of other transmembrane proteins built around helical bundles.     

Organization of model helical peptides in lipid bilayers: insight into the behavior of single-span protein transmembrane domains

Selectively deuterated transmembrane peptides comprising alternating leucine-alanine subunits were examined in fluid bilayer membranes by solid-state nuclear magnetic resonance (NMR) spectroscopy in an effort to gain insight into the behavior of membrane proteins. Two groups of peptides were studied: 21-mers having a 17-amino-acid hydrophobic domain calculated to be close in length to the hydrophobic thickness of 1-palmitoyl-2-oleoyl phosphatidylcholine and 26-mers having a 22-amino-acid hydrophobic domain calculated to exceed the membrane hydrophobic thickness. (2)H NMR spectral features similar to ones observed for transmembrane peptides from single-span receptors of higher animal cells were identified which apparently correspond to effectively monomeric peptide. Spectral observations suggested significant distortion of the transmembrane alpha-helix, and/or potential for restriction of rotation about the tilted helix long axis for even simple peptides. Quadrupole splittings arising from the 26-mer were consistent with greater peptide "tilt" than were those of the analogous 21-mer. Quadrupole splittings associated with monomeric peptide were relatively insensitive to concentration and temperature over the range studied, indicating stable average conformations, and a well-ordered rotation axis. At high peptide concentration (6 mol% relative to phospholipid) it appeared that the peptide predicted to be longer than the membrane thickness had a particular tendency toward reversible peptide-peptide interactions occurring on a timescale comparable with or faster than approximately 10(-5) s. This interaction may be direct or lipid-mediated and was manifest as line broadening. Peptide rotational diffusion rates within the membrane, calculated from quadrupolar relaxation times, T(2e), were consistent with such interactions. In the case of the peptide predicted to be equal to the membrane thickness, at low peptide concentration spectral lineshape indicated the additional presence of a population of peptide having rotational motion that was restricted on a timescale of 10(-5) s.     

Solution structures of stomoxyn and spinigerin, two insect antimicrobial peptides with an alpha-helical conformation

Stomoxyn and spinigerin belong to the class of linear cysteine-free insect antimicrobial peptides that kill a range of microorganisms, parasites, and some viruses but without any lytic activity against mammalian erythrocytes. Stomoxyn is localized in the gut epithelium of the nonvector stable fly that is sympatric with the trypanosome vector tsetse fly. Spinigerin is stored and secreted by hemocytes from the fungus-growing termite. The structure of synthetic stomoxyn and spinigerin in aqueous solution and in TFE/water mixtures was analyzed by CD and NMR spectroscopy combined with molecular modeling calculations. Stomoxyn and spinigerin adopt a flexible random coil structure in water while both assume a stable helical structure in the presence of TFE. In 50% TFE, the structure of stomoxyn is typical of cecropins, including an amphipathic helix at the N-terminus and a hydrophobic C-terminus with helical features that probably fold in a helical conformation at higher TFE concentration. In contrast to stomoxyn, spinigerin acquires very rapidly a helical conformation. In 10% TFE the helix is highly bent and the structure is poorly defined. In 50% TFE, the helical structure is well defined all along its sequence, and the slightly bent alpha-helix displays an amphiphilic character, as observed for magainin 2. The structural similarities between stomoxyn and cecropin A from Hyalophora cecropia and between spinigerin and magainin 2 suggest a similar mode of action on the bacterial membranes of both pairs of peptides. Our results also confirm that TFE induces helix formation and propagation for amino acids showing helical propensity in water but also enhances the helix propagation propensity of nonpolar beta-branched residues.     

Mechanism of Cis-Inhibition of PolyQ Fibrillation by PolyP: PPII Oligomers and the Hydrophobic Effect

PolyQ peptides teeter between polyproline II (PPII) and β-sheet conformations. In tandem polyQ-polyP peptides, the polyP segment tips the balance toward PPII, increasing the threshold number of Gln residues needed for fibrillation. To investigate the mechanism of cis-inhibition by flanking polyP segments on polyQ fibrillation, we examined short polyQ, polyP, and tandem polyQ-polyP peptides. These polyQ peptides have only three glutamines and cannot form β-sheet fibrils. We demonstrate that polyQ-polyP peptides form small, soluble oligomers at high concentrations (as shown by size exclusion chromatography and diffusion coefficient measurements) with PPII structure (as shown by circular dichroism spectroscopy and ³J_HN-Cα constants of Gln residues from constant time correlation spectroscopy NMR). Nuclear Overhauser effect spectroscopy and molecular modeling suggest that self-association of these peptides occurs as a result of both hydrophobic and steric effects. Pro side chains present three methylenes to solvent, favoring self-association of polyP through the hydrophobic effect. Gln side chains, with two methylene groups, can adopt a conformation similar to that of Pro side chains, also permitting self-association through the hydrophobic effect. Furthermore, steric clashes between Gln and Pro side chains to the C-terminal side of the polyQ segment favor adoption of the PPII-like structure in the polyQ segment. The conformational adaptability of the polyQ segment permits the cis-inhibitory effect of polyP segments on fibrillation by the polyQ segments in proteins such as huntingtin.     

Three-dimensional structure/hydrophobicity of latarcins specifies their mode of membrane activity

Latarcins, linear peptides from the Lachesana tarabaevi spider venom, exhibit a broad-spectrum antimicrobial activity, likely acting on the bacterial cytoplasmic membrane. We study their spatial structures and interaction with model membranes by a combination of experimental and theoretical methods to reveal the structure-activity relationship. In this work, a 26 amino acid peptide, Ltc1, was investigated. Its spatial structure in detergent micelles was determined by (1)H nuclear magnetic resonance (NMR) and refined by Monte Carlo simulations in an implicit water-octanol slab. The Ltc1 molecule was found to form a straight uninterrupted amphiphilic helix comprising 8-23 residues. A dye-leakage fluorescent assay and (31)P NMR spectroscopy established that the peptide does not induce the release of fluorescent marker nor deteriorate the bilayer structure of the membranes. The voltage-clamp technique showed that Ltc1 induces the current fluctuations through planar membranes when the sign of the applied potential coincides with the one across the bacterial inner membrane. This implies that Ltc1 acts on the membranes via a specific mechanism, which is different from the carpet mode demonstrated by another latarcin, Ltc2a, featuring a helix-hinge-helix structure with a hydrophobicity gradient along the peptide chain. In contrast, the hydrophobic surface of the Ltc1 helix is narrow-shaped and extends with no gradient along the axis. We have also disclosed a number of peptides, structurally homologous to Ltc1 and exhibiting similar membrane activity. This indicates that the hydrophobic pattern of the Ltc1 helix and related antimicrobial peptides specifies their activity mechanism. The latter assumes the formation of variable-sized lesions, which depend upon the potential across the membrane.     

Hydrophobic matching controls the tilt and stability of the dimeric platelet-derived growth factor receptor (PDGFR) β transmembrane segment

The platelet-derived growth factor receptor β is a member of the cell surface receptor tyrosine kinase family and dimerizes upon activation. We determined the structure of the transmembrane segment in dodecylphosphocholine micelles by liquid-state NMR and found that it forms a stable left-handed helical dimer. Solid-state NMR and oriented circular dichroism were used to measure the tilt angle of the helical segments in macroscopically aligned model membranes with different acyl chain lengths. Both methods showed that decreasing bilayer thickness (DEPC-POPC-DMPC) led to an increase in the helix tilt angle from 10° to 30° with respect to the bilayer normal. At the same time, reconstitution of the comparatively long hydrophobic segment became less effective, eventually resulting in complete protein aggregation in the short-chain lipid DLPC. Unrestrained molecular dynamics simulations of the dimer were carried out in explicit lipid bilayers (DEPC, POPC, DMPC, sphingomyelin), confirming the observed dependence of the helix tilt angle on bilayer thickness. Notably, molecular dynamics revealed that the left-handed dimer gets tilted en bloc, whereas conformational transitions to alternative (e.g. right-handed dimeric) states were not supported. The experimental data along with the simulation results demonstrate a pronounced interplay between the platelet-directed growth factor receptor β transmembrane segment and the bilayer thickness. The effect of hydrophobic mismatch might play a key role in the redistribution and activation of the receptor within different lipid microdomains of the plasma membrane in vivo.     

Hydrophobic peptides: novel regulators within bacterial membrane

Identification of short coding sequences is challenging, both experimentally and in silico , and functional natural peptides (< 50 amino acids) have to a large extent been overlooked in Gram-negative bacteria. Recent results have converged to highlight the role of hydrophobic peptides that form a novel class of active molecules in Escherichia coli and Salmonella enterica serovar Typhimurium. These peptides can play a regulatory role by interacting with protein partners at the inner membrane and by modulating protein partner activity or stability. Genome-wide analyses in both bacterial species have identified several conserved short open reading frames encoding a single transmembrane segment. We discuss the known and predicted membrane-associated peptides and the tools for their identification. Besides the identification of novel regulatory networks, characterization of peptides with a single transmembrane helix segment and proteins that interact with them provides a powerful opportunity to study interactions between alpha helices within biological membranes. In addition, some bioactive membrane peptides could provide a basis for engineering membrane protein antagonists.     

Supramolecular assembly using helical peptides

We investigated supramolecular assemblies of various hydrophobic helical peptides. The assemblies were formed at the air/water interface or in aqueous medium. The hexadecapeptide, Boc-(Ala-Aib)₈-OMe (BA16M), was reported to take α-helical structure by X-ray analysis. Several derivatives were prepared, which have the repeating sequence of Ala-Aib, Lys(Z)-Aib or Leu-Aib, or have the terminal chemically modified. CD spectra of the peptides indicated helical conformation in ethanol solution. The surface pressure-area isotherms of the peptide monolayers showed an inflection at the surface area corresponding to the cross section along the helix axis, and the monolayers were collapsed by further compression. All the helical peptides oriented their helix axis parallel to the air/water interface on the basis of the results of transmission IR spectra and RAS of the monolayers transferred onto substrates.A small mound was observed in the isotherm of BA16M and other derivatives, which was ascribed to the phase transition from the liquid state to the solid state. One mol% of FITC-labeled peptide was mixed into the monolayers to visualize the phase separation of the solid and liquid states at the surface pressure of the coexisting region. Various shapes of the dark domain were observed at the top of the mound in the isotherms by fluorescence microscopy. The helical peptides formed two-dimensional crystals at the air/water interface when they were compressed to the solid state.An amino-terminated helical peptide, HA16B, was suspended in an aqueous medium by a sonication method and transparent dispersion was obtained. The dynamic light scattering measurement of the dispersion revealed the particle size of 75 nm with a narrow size distribution. The molecular assembly of the helical peptide in water was called “Peptosome”, because it takes a vesicular structure.     

Membrane association, electrostatic sequestration, and cytotoxicity of Gly-Leu-rich peptide orthologs with differing functions

The skins of closely related frog species produce Gly-Leu-rich peptide orthologs that have very similar sequences, hydrophobicities, and amphipathicities but differ markedly in their net charge and membrane-damaging properties. Cationic Gly-Leu-rich peptides are hemolytic and very potent against microorganisms. Peptides with no net charge have only hemolytic activity. We have used ancestral protein reconstruction and peptide analogue design to examine the roles of electrostatic and hydrophobic interactions in the biological activity and mode of action of functionally divergent Gly-Leu-rich peptides. The structure and interaction of the peptides with anionic and zwitterionic model membranes were investigated by circular dichroism with 2-dimyristoyl-sn-glycero-3-phosphatidylcholine or 1,2-dimyristoyl-sn-glycero-3-phosphatidylglycerol vesicles and surface plasmon resonance with immobilized bilayers. The results, combined with antimicrobial assays, the kinetics of bacterial killing, and membrane permeabilization assays, reveal that Gly, Val, Thr, and Ile can all be accommodated in an amphipathic alpha helix when the helix is in a membrane environment. Binding to anionic and zwitterionic membranes fitted to a 2-stage interaction model (adsorption to the membrane followed by membrane insertion). The first step is governed by hydrophobic interactions between the nonpolar surface of the peptide helix and the membranes. The strong binding of Gly-Leu-rich cationic peptides to anionic membranes is due to the second binding step and involves short-range Coulombic interactions that prolong the residence time of the membrane-inserted peptide. The data demonstrate that evolution has positively selected charge-altering nucleotide substitutions to generate an orthologous cationic variant of neutral hemolytic peptides that bind to and permeate bacterial cell membranes.     

Structure stability of lytic peptides during their interactions with lipid bilayers.

In this work, molecular dynamics simulations were used to examine the consequences of a variety of analogs of cecropin A on lipid bilayers. Analog sequences were constructed by replacing either the N- or C-terminal helix with the other helix in native or reverse sequence order, by making palindromic peptides based on both the N- and C-terminal helices, and by deleting the hinge region. The structure of the peptides was monitored throughout the simulation. The hinge region appeared not to assist in maintaining helical structure but help in motion flexibility. In general, the N-terminal helix of peptides was less stable than the C-terminal one during the interaction with anionic lipid bilayers. Sequences with hydrophobic helices tended to regain helical structure after an initial loss while sequences with amphipathic helices were less able to do this. The results suggests that hydrophobic design peptides have a high structural stability in an anionic membrane and are the candidates for experimental investigation.     

Dermaseptin S9, an alpha-helical antimicrobial peptide with a hydrophobic core and cationic termini

The dermaseptins S are closely related peptides with broad-spectrum antibacterial activity that are produced by the skin of the South American hylid frog, Phyllomedusa sauvagei. These peptides are polycationic (Lys-rich), alpha-helical, and amphipathic, with their polar/charged and apolar amino acids on opposing faces along the long axis of the helix cylinder. The amphipathic alpha-helical structure is believed to enable the peptides to interact with membrane bilayers, leading to permeation and disruption of the target cell. We have identified new members of the dermaseptin S family that do not resemble any of the naturally occurring antimicrobial peptides characterized to date. One of these peptides, designated dermaseptin S9, GLRSKIWLWVLLMIWQESNKFKKM, has a tripartite structure that includes a hydrophobic core sequence encompassing residues 6-15 (mean hydrophobicity, +4.40, determined by the Liu-Deber scale) flanked at both termini by cationic and polar residues. This structure is reminiscent of that of synthetic peptides originally designed as transmembrane mimetic models and that spontaneously become inserted into membranes [Liu, L., and Deber, C. M. (1998) Biopolymers 47, 41-62]. Dermaseptin S9 is a potent antibacterial, acting on gram-positive and gram-negative bacteria. The structure of dermaseptin S9 in aqueous solution and in TFE/water mixtures was analyzed by circular dichroism and two-dimensional NMR spectroscopy combined with molecular dynamics calculations. Dermaseptin S9 is aggregated in water, but a monomeric nonamphipathic alpha-helical conformation, mostly in residues 6-21, is stabilized by the addition of TFE. These results, combined with membrane permeabilization assays and surface plasmon resonance analysis of the peptide binding to zwitterionic and anionic phospholipid bilayers, demonstrate that spatial segregation of hydrophobic and hydrophilic/charged residues on opposing faces along the long axis of a helix is not essential for the antimicrobial activity of cationic alpha-helical peptides.     

Comparison of helix stability in wild-type and mutant LamB signal sequences

Previous studies of isolated peptides corresponding to the wild-type signal sequence of the LamB protein of Escherichia coli and to several export-impaired mutants demonstrated that a high tendency to adopt an alpha-helical conformation in low dielectric environments was a property of functional sequences. We have now used nuclear magnetic resonance to establish further characteristics of the helical conformation of these signal peptides in a solvent mixture (50% trifluoroethanol, by volume, in water) which mimics the conformational distribution of these peptides in lipid vesicles. The interactions of signal sequences in vivo may depend on the location of the helix in the sequence, on the length of the helical segment, and on the stability of the helix. We find that the hydrophobic core has the most persistent helix conformation and that the stability of this helix correlates with in vivo function of different mutants of the LamB signal sequence. In the family of signal peptides studied here, the length of the helix required for function appears to be less rigidly restricted since a signal peptide from a functional pseudorevertant with 4 residues deleted from the hydrophobic core takes up helix as stably as wild type but incorporates fewer residues in the helix.