Determinants of the position of a Flp-induced DNA bend.

The Flp site-specific recombinase from Saccharomyces cerevisiae induces DNA bending upon interaction with the Flp recognition target (FRT) site. The minimal FRT site is comprised of two inverted binding elements which flank a central core region. Binding of a single monomer of Flp to DNA induces a DNA bend of 60 degrees. The position of this bend differed depending on whether the substrate contained a single binding element or a two-element FRT site. In the present work we tested and disproved a model in which a single Flp monomer interacts with both symmetry elements of a single FRT site. Likewise, we showed that a model in which a Flp monomer dissociates from a singly occupied FRT site and reassociates with the unbound element of another singly occupied FRT site during electrophoresis, does not account for the apparent shift in the position of the bend centre. It seems that the movement of a Flp monomer between the a and b elements of one FRT site during electrophoresis accounts for this anomaly. The position of the DNA bend resulting from the association of a Flp monomer with the FRT site is also influenced by the DNA sequences flanking the site. We conclude that attempts to measure the bend centre of a complex of one Flp molecule bound to a DNA containing two binding elements give misleading results. The position of the bend is more accurately measured in the presence of a single binding element.     

Bending-incompetent variants of Flp recombinase mediate strand transfer in half-site recombinations: role of DNA bending in recombination.

One key feature of the interaction of Flp recombinase with its target site (FRT) is the large bend introduced in the substrate as a result of protein binding. The extent of bending was found to depend on the phasing and spacing of the Flp monomers occupying the two Flp-binding elements (FBE) bordering the strand-exchange region (spacer) of the substrate. The relative mobilities of the Flp complexes formed by the two permuted substrate fragments, containing the FRT site near the end or in the middle, corresponded to a DNA bend of approx. 140 degrees when each of the two FBEs flanking the spacer was occupied by a protein monomer. The estimated bend angle was the same when the reference DNA fragment with the FRT site at the end was substituted by one with the site in the middle, but containing a 4-bp insertion within the spacer. We used a combination of wild-type Flp and Flp variants that were competent or incompetent in DNA bending, together with full, or half FRT sites, to ask whether bending is a conformational requirement for catalysis, namely cleavage and exchange of strands. We obtained the following results: in full-site (FRT) vs. full-site recombinations or in full-site vs. half-site (half FRT) recombinations, there was a large difference in the reactivity between Flp and a bending-incompetent Flp variant. This difference virtually disappeared when reactions were done with half-FRT sites. We conclude that bending is not a prerequisite for catalysis, but represents the manner in which the substrate accommodates the Flp protomer-protomer interactions that are pertinent to catalysis.     

Asymmetry in Flp-mediated cleavage.

Flp is a member of the integrase family of site-specific recombinases. Members of the integrase family mediate DNA strand cleavage via a transesterification reaction involving an active site tyrosine residue. The first step of the reaction results in covalent linkage of the protein to the 3'-phosphoryl DNA terminus, leaving a 5'-hydroxyl group at the site of the nick. We have used Flp recognition target (FRT) sites containing a 5'-bridging phosphorothioate linkage at the site of Flp cleavage to accumulate intermediates in which Flp is covalently bound at a cleavage site. We have probed these intermediates with dimethylsulfate using methylation protection and find that Flp-mediated cleavage is associated with protection of two adenine residues that are opposite the sites of cleavage and covalent attachment by Flp. Methylation interference studies showed that cleavage and covalent attachment are also accompanied by differences in the contacts of Flp with each of the two cleavage sites and with the surrounding symmetry elements. Therefore, we provide evidence that Flp-mediated cleavage and covalent attachment result in changes to the conformation of the Flp-FRT complex. These changes may be required for Flp-mediated strand exchange activity.     

Chemical probe and missing nucleoside analysis of Flp recombinase bound to the recombination target sequence.

The Flp protein catalyzes a site-specific recombination reaction between two 47 bp DNA sites without the assistance of any other protein or cofactor. The Flp recognition target (FRT) site consists of three nearly identical sequences, two of which are separated by an 8 bp spacer sequence. In order to gain insight into this remarkable protein-DNA interaction we used a variety of chemical probe methods and the missing nucleoside experiment to examine Flp binding. Hydroxyl radical footprints of Flp bound to a recombinationally-competent site fall on opposite faces of canonical B-DNA. The 8 bp spacer region between the two Flp binding sites becomes reactive towards 5-phenyl-1,10-phenanthroline.copper upon Flp binding, indicating that once bound by Flp, this segment of DNA is not in the B-form. Missing nucleoside analysis reveals that within each binding site the presence of two nucleosides on the top strand and four on the bottom, are required for formation of a fully-occupied FRT site. In contrast, loss of any nucleoside in the three binding sites in the FRT interferes with formation of lower-occupancy complexes. DNA molecules with gaps in the 8 bp spacer region are over-represented in complexes with either two or three binding sites occupied by Flp, evidence that DNA flexibility facilitates the cooperative interaction of Flp protomers bound to a recombinationally-active site.     

Selection of novel, specific single-stranded DNA sequences by Flp, a duplex-specific DNA binding protein.

Flp is a member of the integrase family of site-specific recombinases. Flp is known to be a double-stranded (ds)DNA binding protein that binds sequence specifically to the 13 bp binding elements in the FRT site (Flprecognitiontarget). We subjected a random pool of oligonucleotides to the in vitro binding site selection method and have unexpectedly recovered a series of single-stranded oligonucleotides to which Flp binds with high affinity. These single-stranded oligonucleotides differ in sequence from the duplex FRT site. The minimal length of the oligonucleotides which is active is 29 nt. This single strand-specific DNA binding activity is located in the same C-terminal 32 kDa domain of Flp in which the site-specific dsDNA binding activity resides. Competition studies suggest that the apparent affinity of Flp for single-stranded oligonucleotide is somewhat less than for a complete duplex FRT site but greater than for a single duplex 13 bp binding element. We have also shown that Cre, another member of the integrase family of site-specific recombinases, also exhibits single-stranded DNA binding similar to that of Flp.     

Geometry of site alignment during int family recombination: antiparallel synapsis by the Flp recombinase

The Flp site-specific recombinase functions in the copy number amplification of the yeast 2 microm plasmid. The recombination reaction is catalyzed by four monomers of Flp bound to two separate, but identical, recombination sites (FRT sites) and occurs in two sequential pairs of strand exchanges. The relative orientation of the two recombination sites during synapsis was examined. Topoisomerase relaxation and nick ligation were used to detect topological nodes introduced by the synapse prior to the chemical steps of recombination. A single negative supercoil was found to be trapped by Flp in substrates with inverted FRT sites whereas no trapped supercoils were observed with direct repeats. The topology of products resulting from Flp-mediated recombination adjacent to a well characterised synapse, that of Tn3 resolvase/res, was analyzed. The deletion and inversion reactions yielded the four noded catenane and the three noded knot, respectively, as the simplest and the most abundant products. The linking number change introduced by the Flp-mediated inversion reaction was determined to be +/-2. The most parsimonious explanation of these results is that Flp aligns its recombination sites with antiparallel geometry. The majority of synapses appear to occur without entrapment of additional random plectonemic DNA supercoils between the sites and no additional crossings are introduced as a result of the chemical steps of recombination.     

Cre induces an asymmetric DNA bend in its target loxP site

Cre initiates recombination by preferentially exchanging the bottom strands of the loxP site to form a Holliday intermediate, which is then resolved on the top strands. We previously found that the scissile AT and GC base pairs immediately 5' to the scissile phosphodiester bonds are critical in determining this order of strand exchange. We report here that the scissile base pairs also influence the Cre-induced DNA bends, the position of which correlates with the initial site of strand exchange. The binding of one Cre molecule to a loxP site induces a approximately 35 degrees asymmetric bend adjacent to the scissile GC base pair. The binding of two Cre molecules to a loxP site induces a approximately 55 degrees asymmetric bend near the center of the spacer region with a slight bias toward the scissile A. Lys-86, which contacts the scissile nucleotides, is important for establishing the bend near the scissile GC base pair when one Cre molecule is bound but has little role in positioning the bend when two Cre molecules are bound to a loxP site. We present a model relating the position of the Cre-induced bends to the order of strand exchange in the Cre-catalyzed recombination reaction.     

The Flp recombinase cleaves Holliday junctions in trans

The Flp site-specific recombinase is encoded by the 2 µm plasmid of Saccharomyces cerevisiae and is a member of the integrase family of recombinases. Like all members of the integrase family studied, Flp mediates recombination in two steps. First, a pair of strand exchanges creates a Holliday-like intermediate; second, this intermediate is resolved to recombinant products by a second pair of strand exchanges.
Evidence derived from experiments using linear substrates indicates that Flp's active site is composed of two Flp protomers. One binds to the Flp recognition target site (FRT site) and activates the scissile phosphodiester bond for cleavage. Another molecule of Flp bound elsewhere in the synaptic complex ( in trans ) donates the nucleophilic tyrosine that executes cleavage and thereby becomes covalently attached to the 3' phosphoryl group at the cleavage site.
It has previously been shown that Flp efficiently resolves synthetic, Holliday-like (χ) structures to linear products. In this paper, we examined whether resolution of χ structures by Flp also occurs via the trans cleavage mechanism. We used in vitro complementation studies of mutant Flp proteins as well as nicked χ structures to show that Flp resolves χ structures by trans cleavage. We propose a model for Flp-mediated recombination that incorporates trans cleavage at both the initial and resolution steps of strand exchange.     

Use of green fluorescent protein/Flp recombinase fusion protein and flow cytometric sorting to enrich for cells undergoing Flp-mediated recombination

Flp recombinase has been used extensively for in vivo manipulation of eukaryotic DNA at specific sequences designated as FRT sites. We developed a method to use Flp-mediated recombination without the need for drug resistance or metabolic selection of cells in which recombination has occurred. We generated expression plasmids directing expression of fusion proteins consisting of Flp recombinase and green fluorescent protein (GFP) coding sequences. When the plasmids were introduced into K562 cells containing Flp recombinase substrates and transfected cells were selected for by flow cytometric sorting, GFP-positive cells were enriched 5- to 30-fold for Flp-mediated recombination events compared with unsorted cells. These studies demonstrate the usefulness of GFP/Flp recombinase fusion proteins to manipulate chromosomal DNA in vivo without requiring drug resistance or metabolic marker genes.     

Symmetric DNA sites are functionally asymmetric within Flp and Cre site-specific DNA recombination synapses

Flp and Cre-mediated recombination on symmetrized FRT and loxP sites, respectively, in circular plasmid substrates yield both DNA inversion and deletion. However, upon sequestering three negative supercoils outside the recombination complex using the resII-resIII synapse formed by Tn3 resolvase and the LER synapse formed by phage Mu transposase in the case of Flp and Cre, respectively, the reactions are channeled towards inversion at the expense of deletion. The inversion product is a trefoil, its unique topology being conferred by the external resolvase or LER synapse. Thus, Flp and Cre assign their symmetrized substrates a strictly antiparallel orientation with respect to strand cleavage and exchange. These conclusions are supported by the product profiles from tethered parallel and antiparallel native FRT sites in dilution and competition assays. Furthermore, the observed recombination bias favoring deletion over inversion in a nicked circular substrate containing two symmetrized FRT sites is consistent with the predictions from Monte Carlo simulations based on antiparallel synapsis of the DNA partners.     

FLP protein of 2 mu circle plasmid of yeast induces multiple bends in the FLP recognition target site

The FLP recombinase of the 2 mu plasmid of Saccharomyces cerevisiae binds to a target containing three 13 base-pair symmetry elements called a, b and c. The symmetry elements b and c are in direct orientation while the a element is in inverted orientation with respect to b and c on the opposite side of an eight base-pair core region. Each symmetry element acts as a binding site for the FLP protein. The FLP protein can form three different complexes with the FLP recognition target (FRT site) according to the number of elements within the site that are occupied by the FLP protein. Binding of FLP to the FRT site induces DNA bending. We have measured the angles of bends caused by the binding of the FLP protein to full and partial FRT sites. We find that FLP induces three types of bend in the FRT-containing DNA. The type I bend is approximately 60 degrees and results from a molecule of FLP bound to one symmetry element. The type II bend is greater than 144 degrees and results from FLP molecules bound to symmetry elements a and b. The type III bend is approximately 65 degrees and results from FLP proteins bound to symmetry elements b and c. Certain FLP proteins that are defective in recombination can generate the type I and type III bends but are impaired in their ability to induce the type II bend. We discuss the role of bending in FLP-mediated recombination.     

Site-specific recombination in Zea mays

The elimination of marker genes after selection is recommended for the commercial use of genetically modified plants. We compared the applicability of the two site-specific recombination systems Cre/lox and Flp/FRT for marker gene elimination in maize plants. The selection marker gene pat surrounded by two identically directed lox or FRT sites was introduced into maize. Sexual crossing with plants harboring the corresponding constitutively expressed recombinase led to the precise and complete excision of the lox-flanked marker gene in the F₁ progeny, whereas Flp-mediated recombination of FRT sequences occurred rarely. Further examination of site-specific integration was done by biolistic bombardment of immature embryos harboring only one lox site with a lox.uidA sequence with results indicating directed integration.     

The functional significance of DNA sequence structure in a site-specific genetic recombination reaction.

A series of sequence changes in the spacer region of the FLP recombination target (FRT) site are presented which drastically reduce site function without affecting recognition by the FLP protein. The effects follow a pattern which indicates that two structural features of the FRT site are essential for site function: a pair of pyrimidine tracts arranged in a palindrome and a predominance of AT base pairs in the spacer. The FRT site represents a sequence that serves to facilitate unwinding of the DNA within the spacer region during recombination. The results provide a clear demonstration of a role for a DNA sequence element that is distinct from protein recognition.     

A genome-wide analysis of FRT-like sequences in the human genome

Efficient and precise genome manipulations can be achieved by the Flp/FRT system of site-specific DNA recombination. Applications of this system are limited, however, to cases when target sites for Flp recombinase, FRT sites, are pre-introduced into a genome locale of interest. To expand use of the Flp/FRT system in genome engineering, variants of Flp recombinase can be evolved to recognize pre-existing genomic sequences that resemble FRT and thus can serve as recombination sites. To understand the distribution and sequence properties of genomic FRT-like sites, we performed a genome-wide analysis of FRT-like sites in the human genome using the experimentally-derived parameters. Out of 642,151 identified FRT-like sequences, 581,157 sequences were unique and 12,452 sequences had at least one exact duplicate. Duplicated FRT-like sequences are located mostly within LINE1, but also within LTRs of endogenous retroviruses, Alu repeats and other repetitive DNA sequences. The unique FRT-like sequences were classified based on the number of matches to FRT within the first four proximal bases pairs of the Flp binding elements of FRT and the nature of mismatched base pairs in the same region. The data obtained will be useful for the emerging field of genome engineering.     

An Escherichia coli system for assay of Flp site-specific recombination on substrate plasmids

We have developed an Escherichia coli system for testing the behaviour of plasmids carrying target sites for the Flp site-specific recombinase. The E. coli strain BL-FLP is described, which carries a chromosomally integrated bacteriophage T7 RNA polymerase gene expressed from a lac promoter, and harbours the plasmid pMS40. pMS40 has the features: (i) it carries the FLP recombinase gene under the control of a bacteriophage T7 promoter, (ii) it confers kanamycin resistance, and (iii) it uses an R6K origin of replication; these two latter features make it compatible with most conventional cloning vectors. Substrate plasmids carrying Flp-recognition targets (FRT) are transformed into BL-FLP, and the consequences of Flp-mediated recombination can be analysed after subsequent extraction of plasmid DNA. We show that this system is capable of base-perfect Flp-mediated recombination on plasmid substrates. We also present a corrected sequence of the commonly used Flp substrate plasmid, pNEOβGAL (O'Gorman et al. (1991) Science 251, 1351–1355).     

Protein-induced local DNA bends regulate global topology of recombination products

The tyrosine family of recombinases produces two smaller DNA circles when acting on circular DNA harboring two recombination sites in head-to-tail orientation. If the substrate is supercoiled, these circles can be unlinked or form multiply linked catenanes. The topological complexity of the products varies strongly even for similar recombination systems. This dependence has been solved here. Our computer simulation of the synapsis showed that the bend angles, phi, created in isolated recombination sites by protein binding before assembly of the full complex, determine the product topology. To verify the validity of this theoretical finding we measured the values of phi for Cre/loxP and Flp/FRT systems. The measurement was based on cyclization of the protein-bound short DNA fragments in solution. Despite the striking similarity of the synapses for these recombinases, action of Cre on head-to-tail target sites produces mainly unlinked circles, while that of Flp yields multiply linked catenanes. In full agreement with theoretical expectations we found that the values of phi for these systems are very different, close to 35 degrees and 80 degrees, respectively. Our findings have general implications in how small protein machines acting locally on large DNA molecules exploit statistical properties of their substrates to bring about directed global changes in topology.     

Reactions of Cre with Methylphosphonate DNA: Similarities and Contrasts with Flp and Vaccinia Topoisomerase

Background

Reactions of vaccinia topoisomerase and the tyrosine site-specific recombinase Flp with methylphosphonate (MeP) substituted DNA substrates, have provided important insights into the electrostatic features of the strand cleavage and strand joining steps catalyzed by them. A conserved arginine residue in the catalytic pentad, Arg-223 in topoisomerase and Arg-308 in Flp, is not essential for stabilizing the MeP transition state. Topoisomerase or its R223A variant promotes cleavage of the MeP bond by the active site nucleophile Tyr-274, followed by the rapid hydrolysis of the MeP-tyrosyl intermediate. Flp(R308A), but not wild type Flp, mediates direct hydrolysis of the activated MeP bond. These findings are consistent with a potential role for phosphate electrostatics and active site electrostatics in protecting DNA relaxation and site-specific recombination, respectively, against abortive hydrolysis.

Methodology/Principal Findings

We have examined the effects of DNA containing MeP substitution in the Flp related Cre recombination system. Neutralizing the negative charge at the scissile position does not render the tyrosyl intermediate formed by Cre susceptible to rapid hydrolysis. Furthermore, combining the active site R292A mutation in Cre (equivalent to the R223A and R308A mutations in topoisomerase and Flp, respectively) with MeP substitution does not lead to direct hydrolysis of the scissile MeP bond in DNA. Whereas Cre follows the topoisomerase paradigm during the strand cleavage step, it follows the Flp paradigm during the strand joining step.

Conclusions/Significance

Collectively, the Cre, Flp and topoisomerase results highlight the contribution of conserved electrostatic complementarity between substrate and active site towards transition state stabilization during site-specific recombination and DNA relaxation. They have potential implications for how transesterification reactions in nucleic acids are protected against undesirable abortive side reactions. Such protective mechanisms are significant, given the very real threat of hydrolytic genome damage or disruption of RNA processing due to the cellular abundance and nucleophilicity of water.     

Specific targeted integration of kanamycin resistance-associated nonselectable DNA in the genome of the yeast Saccharomyces cerevisiae

Sophisticated genome manipulation requires the possibility to modify any intergenic or intragenic DNA sequence at will, without leaving large amounts of undesired vector DNA at the site of alteration. To this end, a series of vectors was developed from a previous gene knockout plasmid system to integrate nonselectable foreign DNA at any desired genomic location in yeast, with a minimum amount of residual plasmid DNA. These vectors have two mutated Flp recognition targets (FRT) sequences flanking the KanMX4 gene and multiple sites for subcloning the DNA fragment to be integrated. The selectable marker can be recycled by Flp site-specific excision between the identical FRTs, thereby allowing the integration of further DNA fragments. With this system, the NLS-tetR-GFP and DsRed genes were successfully integrated at the thr1 locus, and the RVB1 gene was tagged at the C-terminus with the V5-epitope-6-histidine tag. This plasmid system provides for a new molecular tool to integrate any DNA fragment at any genome location in [cir+] yeast strains. Moreover, the system can be extrapolated to other eukaryotic cells in which the FLP/FRT system functions efficiently.     

Expression of Flp Protein in a Baculovirus/Insect Cell System for Biotechnological Applications

The Saccharomyces cerevisiae Flp protein is a site-specific recombinase that recognizes and binds to the Flp recognition target (FRT) site, a specific sequence comprised of at least two inverted repeats separated by a spacer. Binding of four monomers of Flp is required to mediate recombination between two FRT sites. Because of its site-specific cleavage characteristics, Flp has been established as a genome engineering tool. Amongst others, Flp is used to direct insertion of genes of interest into eukaryotic cells based on single and double FRT sites. A Flp-encoding plasmid is thereby typically cotransfected with an FRT-harboring donor plasmid. Moreover, Flp can be used to excise DNA sequences that are flanked by FRT sites. Therefore, the aim of this study was to determine whether Flp protein and its step-arrest mutant, FlpH305L, recombinantly expressed in insect cells, can be used for biotechnological applications. Using a baculovirus system, the proteins were expressed as C-terminally 3?×?FLAG-tagged proteins and were purified by anti-FLAG affinity selection. As demonstrated by electrophoretic mobility shift assays (EMSAs), purified Flp and FlpH305L bind to FRT-containing DNA. Furthermore, using a cell assay, purified Flp was shown to be active in recombination and to mediate efficient insertion of a donor plasmid into the genome of target cells. Thus, these proteins can be used for applications such as DNA-binding assays, in vitro recombination, or genome engineering.