Effects of surfactants on emulsification and secondary structure of lysozyme in aqueous solutions

This paper reports our investigations on the secondary structure of lysozyme in aqueous solution with D₂O and comparing systems emulsified with ionic and non-ionic amphiphiles, respectively. The opposite effect of concentration of surfactants on the lysozyme aqueous system was studied and the activity of lysozyme by the turbidimetric assay with different kinds of surfactant was compared. The effect of different surfactants on emulsification volume formed was observed and discussed. The different interactive patterns between lysozyme and ionic and non-ionic surfactants, such as sodium dodecyl sulfate (SDS), cetyl trimethyl ammonium bromide (CTAB) and Triton-X100 (Isooctoylphenoxypolyethoxy ethanol), respectively, was studied with FTIR. A simple relationship between the secondary structure and denaturation of protein is given for the emulsification of lysozyme in aqueous solutions. It is important for understanding the stabilization and avoiding the emulsions in the extraction process that the interactions between the proteins and surfactants which leads to the formation of such complexes are characterized. The utility of surfactants as a de-emulsifying agent for the commercial process to extract penicillin G from the filtrate of fermentation broth was consistent with these results.     

Interactions between surfactants and biomass during liquid–liquid extraction

Fermentation systems can contain may surface‐active compounds that can interfere with downstream separation processes. This work examines the interactions that can occur between surfactants and biomass during solute mass transfer in a liquid–liquid extraction system. Adding the surfactants sodium dodecyl sulfate and dodecyl trimethyl ammonium bromide to the aqueous phase caused a substantial increase in the mass transfer of chloramphenicol between water and octanol. Further investigation of the interfacial region using an optical Schlieren apparatus revealed that these increases were due to interfacial turbulence that gave rise to a rapid surface renewal convective mass transfer mechanism. When microbial biomass was present with sodium dodecyl sulfate, an increase in the mass transfer rate was again found, however, to a lesser extent. In contrast, dodecyl trimethyl ammonium bromide did not promote mass transfer and it is postulated that electrical interactions between the surfactant and the cell surface prevented adsorption of either at the interface. The interaction between the antifoaming agent polypropylene glycol 2000 and extraction system components was also investigated, with both positive and negative effects being recorded under varying conditions. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Cellular lysis of Streptococcus faecalis induced with triton X-100.

Lysis of exponential-phase cultures of Streptococcus faecalis ATCC 9790 was induced by exposure to both anionic (sodium dodecyl sulfate) and nonionic (Triton X-100) surfactants. Lysis in response to sodium dodecyl sulfate was effective only over a limited range of concentrations, whereas Triton X-100-induced lysis occurred over a broad range of surfactant concentrations. The data presented indicate that the bacteriolytic response of growing cells to Triton X-100: (i) was related to the ratio of surfactant to cells and not the surfactant concentration per se; (ii) required the expression of the cellular autolytic enzyme system; and (iii) was most likely due to an effect of the surfactant on components of the autolytic system that are associated with the cytoplasmic membrane. The possibility that Triton X-100 may induce cellular lysis by releasing a lipid inhibitor of the cellular autolytic enzyme is discussed.     

Ethoxylated alcohol (Neodol-12) and other surfactants in the assay of protein kinase C

Most commonly used surfactants were found to be inhibitors of partially purified rat brain protein kinase C at or above their critical micellar concentrations (CMC). These include sodium lauryl sulfate, deoxycholate, octyl glucoside, dodecyl trimethylammonium bromide, linear alkylbenzene sulfonate and Triton X-100. Several detergents, including the nonionic surfactants digitonin and Neodol-12 (ethoxylated alcohol), did not inhibit protein kinase C activity, even at concentrations greater than their CMC, while the anionic surfactant, AEOS-12 (ethoxylated alcohol sulfate), inhibited enzyme activity only slightly (less than 8%). Since these latter surfactants have little or no inhibitory effect on protein kinase C, they may be of value in solubilizing cells and tissues for the determination of enzyme activity in crude extracts. Among the detergents tested, sodium lauryl sulfate and linear alkylbenzene sulfonate significantly stimulated protein kinase C activity in the absence of phosphatidylserine and calcium. This was found to be dependent on the presence of histone in the protein kinase C assay. These detergents failed to stimulate protein kinase C activity when endogenous proteins in the partially purified rat brain extracts were used as the substrate. Our results indicate that activity of protein kinase C can be modified by the conditions of the assay and by the detergents used to extract the enzyme.     

Adsorption of surfactants on a <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> strain and the effect on cell surface lypohydrophilic property

The adsorption behavior of five surfactants, cetyltrimethylammonium bromide (CTAB), Triton X-100, Tween 80, sodium dodecyl sulfate (SDS), and rhamnolipid, on a Pseudomonas aeruginosa strain and the effect of temperature and ionic strength (IS) on the adsorption were studied. The change of cell surface lypohydrophilic property caused by surfactant adsorption was also investigated. The results showed that the adsorption kinetics of the surfactants on the cell followed the second-order law. CTAB adsorption was the fastest one under the experimental conditions, and it took longest for SDS adsorption to equilibrate because of electric repulsion. The adsorption of Triton X-100 and Tween 80 was characterized by short equilibration time, and rhamnolipid adsorption reached equilibrium in about 90 min. The adsorption isotherms of all the surfactants on the bacterium fitted Freundlich equation well, but the adsorption capacity and mode were variations for the surfactants as indicated by k and n parameters in the equations. The adsorption mode for all the surfactants except SDS is probably hydrophilic interaction because the adsorption totally turned the cell surface to be more hydrophobic. Neither the temperature nor the IS had significant effect on CTAB adsorption, but higher IS significantly enhanced SDS adsorption and modestly strengthened adsorption of Triton X-100, Tween 80, and rhamnolipid. Higher temperature strengthened adsorption of SDS but weakened the adsorption of Triton X-100, Tween 80, and rhamnolipid.     

Effect of surfactants on the thermal, conformational and rheological properties of collagen

Collagen is an important biomaterial and its interaction with surfactant is important in light of its use in various cosmetics and dermatological applications. Presently, the effect of surfactants on the physico-chemical properties of collagen has been studied. The thermal stability of collagen is reduced by sodium dodecyl sulfate and hexadecyltrimethylammmonium bromide, whereas Triton X-100 does not. The viscosity of collagen is influenced greatly depending on the surfactant concentrations. The secondary structure of collagen shows changes only in the molar ellipticity. The role of charge and concentration of surfactants in influencing the various physico-chemical properties of collagen has been elucidated.     

Study of inclusion complexes of cycloamylose with surfactants by isothermal titration calorimetry

Useful materials can be made from cycloamylose (CA) and the functional properties of CA could be improved by complexation with surfactants. Isothermal titration calorimetry (ITC) was used to investigate interactions between CA and surfactants in buffered solutions. Three surfactants with C₁₂ non-polar tail groups and charged [anionic: sodium dodecyl sulfate (SDS); cationic: dodecyl trimethylammonium bromide (DTAB)] or non-charged headgroups [non-ionic: polyoxyethylene 23 lauryl ether (Brij35)] were used in this study. The effects of temperature, pH, and salt concentration were also studied. All three surfactants bound to CA; however, Brij35 binding to CA was negligible. Enthalpy changes associated with binding of surfactants to CA were exothermic except for interactions measured at 50 °C. There was no effect of pH on surfactant demicellization or CA binding. Salt concentration affected surfactant demicellization, but the amount of SDS bound to CA at saturation was unaffected by salt. When the titration curves obtained for CA with SDS and DTAB were fitted, it could be analyzed using a model based on a single set of identical sites.     

Effects of surfactant adsorption and biodegradability on the distribution of bacteria between sediments and water in a freshwater microcosm.

A microcosm containing resuspended river sediment was used to investigate the effect of anionic surfactants on the distribution of bacteria between planktonic and attached populations. Freshwater river sediment containing viable bacteria was preequilibrated in the microcosm, which was subsequently supplemented with biodegradable or recalcitrant surfactants and a non-surface-active carbon and energy source. Population dynamics of both free-living and attached bacteria were measured by epifluorescence microscopy with simultaneous analysis of the residual solution concentration of the xenobiotic carbon source. The addition of the readily biodegradable anionic surfactants sodium decyl sulfate and sodium dodecyl sulfate in separate experiments caused an increase in the number of attached bacteria and a concomitant decrease in the number of free-living bacteria. As biodegradation of the surfactants progressed, these trends reversed and the bacterial populations had returned to their preaddition values by the time when biodegradation was completed. In contrast, sodium tetradecyl sulfate or sodium dodecane sulfonate did not stimulate bacterial association with sediment, nor were they biodegraded in the microcosm. Sodium pyruvate, a non-surface-active carbon and energy source, was readily utilized but caused no bacterial attachment to the sediment. These results indicate that for an anionic surfactant to induce bacterial attachment to river sediment, it must be biodegradable. The bacterial attachment to the sediment appears to be reversible and may be dependent on the accumulation of the surfactant at the surface or as a result of alteration of the surface free energies.     

Effects of surfactant adsorption and biodegradability on the distribution of bacteria between sediments and water in a freshwater microcosm.

A microcosm containing resuspended river sediment was used to investigate the effect of anionic surfactants on the distribution of bacteria between planktonic and attached populations. Freshwater river sediment containing viable bacteria was preequilibrated in the microcosm, which was subsequently supplemented with biodegradable or recalcitrant surfactants and a non-surface-active carbon and energy source. Population dynamics of both free-living and attached bacteria were measured by epifluorescence microscopy with simultaneous analysis of the residual solution concentration of the xenobiotic carbon source. The addition of the readily biodegradable anionic surfactants sodium decyl sulfate and sodium dodecyl sulfate in separate experiments caused an increase in the number of attached bacteria and a concomitant decrease in the number of free-living bacteria. As biodegradation of the surfactants progressed, these trends reversed and the bacterial populations had returned to their preaddition values by the time when biodegradation was completed. In contrast, sodium tetradecyl sulfate or sodium dodecane sulfonate did not stimulate bacterial association with sediment, nor were they biodegraded in the microcosm. Sodium pyruvate, a non-surface-active carbon and energy source, was readily utilized but caused no bacterial attachment to the sediment. These results indicate that for an anionic surfactant to induce bacterial attachment to river sediment, it must be biodegradable. The bacterial attachment to the sediment appears to be reversible and may be dependent on the accumulation of the surfactant at the surface or as a result of alteration of the surface free energies.     

Influence of coprecipitation and interactions with anionic surfactants on the activity of plant phospholipase D.

The effects of two surfactants (sodium dodecyl sulfate and sodium dodecyl dioxyethylene sulfate) of similar structure but differing water solubility (of their calcium salts) on the enzymatic activity of cabbage phospholipase D have been studied. The solubility difference is insignificant because the two surfactants activate phospholipase D similarly. To elucidate the mechanism of their influence on the enzyme, the phase behavior in the reaction media and the interactions of the surfactants with the enzyme were investigated by potentiometry and by light scattering and UV spectroscopy. Calcium dodecyl dioxyethylene sulfate (which is more soluble in water than calcium dodecyl sulfate) precipitates in the presence of phosphatidylcholine, the substrate of the enzymatic reaction. In the reaction media phospholipase D was involved into a precipitate consisting of calcium salts of the surfactants and phosphatidylcholine that might be interpreted as its immobilization. In addition, the surfactants were adsorbed on the enzyme, unfolding the globular enzyme molecule due to electrostatic repulsion between adsorbed surfactant anions. The observed increase in the functional activity of phospholipase D is accounted for by transfer to an optimal tertiary structure for the enzyme molecule in the course of consecutive conformational transitions induced by the surfactants.     

Charge separation of proteins complexed with sodium dodecyl sulfate by acid gel electrophoresis in the presence of cetyltrimethylammonium bromide.

Globular proteins, casein, and membrane proteins which were reacted with sodium dodecyl sulfate were studied by acid urea gel electrophoresis. The sodium dodecyl sulfate bound tightly to the proteins, producing a more acidic charge which prevented migration into the gel. When cetyltrimethylammonium bromide was added to the sodium dodecyl sulfate-protein complexes, the sodium dodecyl sulfate apparently reacted with cetyltrimethylammonium bromide and dissociated so that the proteins migrated in acid gel in a normal manner as compared to the proteins without any added detergent. The sodium dodecyl sulfate-cetyltrimethylammonium bromide complex could be removed from the proteins by centrifugation. Thus, cetyltrimethylammonium bromide used in conjunction with acid gel electrophoresis allows direct comparison by charge of proteins fractionated in the presence of sodium dodecyl sulfate with the starting mixture of proteins not exposed to detergent. The reaction of cetyltrimethylammonium bromide with sodium dodecyl sulfate in acidic urea also provides a simple convenient method of removal of sodium dodecyl sulfate from proteins.     

Effect of various surfactants (cationic,anionic and non-ionic) on the growth of <Emphasis Type="Italic">Aspergillus parasiticus</Emphasis> (NRRL 2999) in relation to aflatoxin production

The effect of surfactants (two cationic, one anionic and three non-ionic) at 0.001, 0.01, 0.1 and 1.0 % concentrations on aflatoxin production, ergosterol content and sugar consumption by Aspergillus parasiticus (NRRL 2999) in YES liquid culture medium is reported. At 0.01% concentration, the cationic surfactants, cetyl dimethyl ammonium bromide (CDAB) and dodecyl trimethyl ammonium bromide (DTAB), and the anionic surfactant, sodium dodecyl sulfate (SDS), completely inhibited spore germination, while DTAB also inhibited the production of ergosterol and toxin (p < 0.05). At a concentration of 0.001%, CDAB was found to enhance toxin production, while SDS was found to inhibit it when compared with other surfactants. Non-ionic surfactants, polyoxyethylene sorbitan monolaurate (Tween-20), polyoxyethylene lauryl ether (Brij-35) and ethoxylated p-tert-octylphenol (Triton X-100) delayed the spore germination up to day 5 at all concentrations and inhibited toxin and ergosterol production at 0.001% concentration. The affect was found to be dose-dependent from 0.001% to 1%, for Triton X-100 only. Positive correlation between ergosterol content and toxin production in the presence of different surfactants at various time periods (3, 5, 7, 9 and 12 days) was found. Tween-20 was most effective in inhibiting toxin production on day 7, when aflatoxin production was found to be maximal in control group. Sugar consumption was directly proportional to the ergosterol content, showing a significant correlation with aflatoxin production.     

Multiple forms of endothelial cell growth factor. Rapid isolation and biological and chemical characterization

Endothelial cell growth factor (ECGF) can be rapidly purified from bovine brain to high specific activity using heparin-Sepharose affinity chromatography. Purification of the mitogen by this method results in relatively high yields of the polypeptide (10 to 100 micrograms/kg of tissue) with biological activity on murine and human endothelial cells in the picogram range. The product obtained is a mixture of two single-chain polypeptides with apparent molecular weights of 17,000 (alpha-ECGF) and 20,000 (beta-ECGF) by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The two forms of ECGF can be separated by either NaCl gradient elution from heparin-Sepharose or reversed-phase high pressure liquid chromatography. The two polypeptides are related on the basis of similar: amino acid compositions, affinity for heparin-Sepharose, cyanogen bromide and trypsin-derived cleavage products, and biological activity. Furthermore, the cyanogen bromide fragments derived from the two forms of ECGF also possess similar amino acid compositions and mobilities on sodium dodecyl sulfate gels. These data suggest that there are at least two discrete molecular forms of ECGF in bovine brain and that these two molecules are structurally related.     

Inhibition of Mussel Suspension Feeding by Surfactants of Three Classes

Effects of three surfactants on the filtration rates by marine mussels were studied. The xenobiotics tested represented anionic, cationic and non-ionic surfactants (tetradecyltrimethylammonium bromide, a representative of a class of cationic surfactants; sodium dodecyl sulphate, a representative of anionic alkyl sulfates; and Triton X-100, a representative of non-ionic hydroxyethylated alkyl phenols). All three surfactants inhibited the clearance rates. The significance of the results for the ecology of marine ecosystems is discussed.     

Effect of Surfactants on Activity and Stability of Native and Chemically Modified Lipases A and B from Candida Rugosa

The effect of sodium dodecyl sulfate (SDS) and Triton X-100 on the hydrolytic activity of lipases A and B from Candida rugosa has been studied. Lipase B is significantly more affected than lipase A by the presence of both surfactants; Triton X-100 produces a more deleterious effect than SDS with both isoenzymes. In addition, the stability of lipases A and B in the presence of different concentrations of SDS was investigated; lipase A was more stable than isoform B. Both isoenzymes were chemically modified by reaction of their amino groups with octanoyl chloride or activated polyethylene glycol (PEG, mol. wt. 5000). In all cases the modification produced a protective effect against denaturation by SDS. In particular, PEG₅₀₀₀-liPases A and B were significantly more stable (stabilization factor: 3-4) than the native enzymes at the surfactant concentrations tested.     

Capsule polysaccharide-protein-peptidoglycan complex in the cell envelope of Rhodobacter capsulatus

The capsule polysaccharide-protein-peptidoglycan complex (insoluble in boiling sodium dodecyl sulfate and hot phenol-water) from cell envelopes of Rhodobacter capsulatus St. Louis was characterized. Hydrofluoric, hydrochloric acid or alkaline hydrolysis solubilized the polysaccharide moiety, whereas the protein-peptidoglycan moiety remained insoluble. On treatment of the protein-peptidoglycan moiety with lysozyme, the protein with peptidoglycan-residues bound was solubilized. It showed a single, broad peptide band (M _r=about 17,000) on sodium dodecyl sulfate polyacrylamide gel-electrophoresis. The same protein was obtained by lysozyme digestion (without preceding hydrofluoric or hydrochloric acid treatment) of the protein-peptidoglycan complex of the phage-resistant mutant Rhodobacter capsulatus St. Louis RC1^-, in which the capsule polysaccharide is present in a free form. A protein-peptidoglycan complex was isolated also from the capsulefree Rhodobacter capsulatus 37b4. Covalent binding between the protein and peptidoglycan moieties is likely for all three strains as is the lipoprotein nature of the protein moiety. The polysaccharide moiety of the complete complex from the wild-type Rhodobacter capsulatus St. Louis was at least partly removable from the complex in the presence of high salt concentrations or ethylene diamine tetraacetate. A specific amino acid pattern (with Ser, Gly, Glu, and Ala dominating) remained constantly associated with the capsule polysaccharide moiety independent of the separation procedure.Abbreviations A₂pm diaminopimelic acid - Cetavlon cetyltrimethyl-ammonium bromide - EDTA ethylene-diaminetetraacetate, disodium salt - HF hydrofluoric acid - HPLC high-performance liquid chromatography - PAGL polyacrylamide gel-electrophoresis - SDS sodium dodecyl sulfate - TCA trichloroacetic acid     

Protection of sodium dodecyl sulfate-induced aggregation of concanavalin a by saccharide ligands

Concanavalin Å is visibly aggregated by low concentrations of sodium dodecyl sulfate, maximum aggregation being obtained at pH 4.6. Other denaturants, such as urea, guanidine hydrochloride, Triton X-100, cetyltrimethylammonium bromide, Tween 80, and Brij 35 are ineffective in promoting visible aggregation. The sodium dodecyl sulfate-induced aggregation of concanavalin Å requires the presence of an intact, saccharide-ligand binding-site. Rapid and complete reversal of the detergent effect was achieved by use of saccharides which bind to the lectin. Such compounds as tryptophan and o-nitrophenyl β-d-galactopyranoside did not inhibit the aggregation of concanavalin Å by sodium dodecyl sulfate, suggesting that the detergent does not bind the hydrophobic pocket on the surface of the protein. The results suggest that concanavalin Å may have an additional, ligand-binding site which is netal-dependent and which can be modified by the addition of a saccharide ligand.     

Purification and characterization of a lipase from Pseudomonas aeruginosa KKA-5 and its role in castor oil hydrolysis

An extracellular lipase (triacylglycerol acylhydrolase, EC 3.1.1.3) from Pseudomonas aeruginosa KKA-5 hydrolyzed castor oil by 90%. Purification of this castor oil-hydrolyzing lipase included ammonium sulfate precipitation and successive hydroxylapatite column chromatography. The enzyme was purified 518-fold. It was homogeneous electrophoretically and its molecular weight was estimated to be 30 kDa. The enzyme was stable up to 45°C and retained its activity in the alkaline pH range. Lipase was highly stable in the presence of aqueous organic solvents like methanol and ethanol. It was weakly inhibited in the presence of acetone. The anionic surfactant, sodium dodecyl sulfate, was inhibitory while the cationic surfactants, Triton X-100 and Tween-80 appreciably enhanced activity. Lipase was stabilized significantly by Ca²⁺. Inactivation of the enzyme by EDTA was overcome by sequential CaCl₂ treatment. This finding suggests the existence of a calcium-binding site in Pseudomonas aeruginosa KKA-5 lipase. Received 22 January 1998/ Accepted in revised form 27 April 1998     

Purification and Characterization of a Thermo- and Organic Solvent-Tolerant Alkaline Protease from Bacillus sp. JER02

Bacillus sp. JER02 is a bacterial strain that can be grown in a medium containing organic solvents and produce a protease enzyme. JER02 protease was purified with a yield of 31.9% of total protein and 328.83-fold purification. K _m and V_max of this protease were established as 0.826 µM and 7.18 µmol/min, respectively. JER02 protease stability was stimulated about 80% by cyclohexane. It exhibited optimum temperature activity at 70°C. Furthermore, this enzyme was active in a wide range of pH (4-12) and showed maximum activity at pH 9.0. The nonionic detergents Tween-20 and Triton X-100 improved the protease activity by 30 and 20%, respectively. In addition, this enzyme was shown to be very stable in the presence of strong anionic surfactants and oxidizing agents, since it retained 77%, 93%, and 98% of its initial activity, after 1 hr of incubation at room temperature with sodium dodecyl sulfate (SDS), sodium perborate (1%, v/v) and H₂O₂ (1%, v/v), respectively. Overall, the unique properties of the Bacillus sp. JER02 protease suggested that this thermo- and detergent-stable, solvent-tolerant protease has great potential for industrial applications.     

On the effect of lysophosphatidylcholine, platelet activating factor and other surfactants on calcium permeability in sarcoplasmic reticulum vesicles.

The effect of low concentrations of lysophosphatidylcholine (LPC), platelet-activating factor (PAF) and other surfactants (Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate) on membrane permeability of native sarcoplasmic reticulum vesicles and sarcoplasmic reticulum lipid vesicles, has been studied. Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate were all able to permeabilize membranes at concentrations of surfactants below their critical micellar concentration (CMC) in both lipid and native vesicles, being the K0.5 of calcium release from native vesicles lower than that from lipid vesicles. The values of these K0.5 were well correlated with the corresponding CMC values for each type of membrane. However, both LPC and PAF behaved in a different way since, although they induced permeabilization of the native vesicles at values of K0.5 close to their CMC, their K0.5 values for permeabilizing vesicles, prepared by using lipids extracted from sarcoplasmic reticulum, were much higher than their corresponding CMC.