Evolution of skull shape in carnivores 1. Representative modern carnivores

Fifteen variables, selected primarily to reflect functionally significant aspects of cranial morphology, were measured on one skull each of 62 species of modern carnivores, including viverrids, canids, mustelids and felids. To allow comparisons between species of different sizes without the potentially confounding effects of allometric shape changes, the measurements were transformed to dimensionless variables, based on the residuals from allometric equations. Fourteen out of 15 of the transformed variables distinguish one or more of the four family groups and the rotated first two axes of a principal components analysis distinguish all four families from each other. The following functional hypotheses are proposed: mustelids and felids have the most powerful bites and canids the weakest among the four family groups studied; mustelids and, to a lesser degree, felids have more powerful neck musculature than do canids and viverrids; and visual abilities are best developed among felids and least developed among mustelids. The first two functional hypotheses suggest possible differences in killing behaviour, which are supported by a preliminary survey of the literature on such behaviour. Allometric analysis of the 15 cranial measures shows that the neurocranial components scale with negative allometry, while most of the other measures scale approximately isometrically.     

Evolution of skull shape in carnivores 2. Additional modern carnivores

Fifteen functionally significant aspects of skull morphology were measured on skulls of 36 additional species of carnivores to complete a survey of skull shape in modern fissiped (land) carnivores that includes most of the living genera. The measurements were transformed to dimensionless variables based on the residuals from allometric equations, and were analysed singly and in a 10 variable principal components analysis. An initial study of 62 species of viverrids, canids, mustelids and felids had shown those families to be distinguished from each other by the functionally significant measurements. However, among the additional 36 species, some procyonids, ursids and mustelids display a range of diversity of skull morphology that overlaps that of the other families and diminishes the potential value of the measurements as taxonomic characters. Intraspecific variation is presented for 12 species, and is low enough to allow use of some features as species level diagnostic characters. The lack of correlation between diet and functionally significant aspects of skull morphology among omnivorous carnivores, and the absence of certain skull shapes among carnivores are discussed.     

Convergence and remarkably consistent constraint in the evolution of carnivore skull shape

Phenotypic similarities between distantly related marsupials and placentals are commonly presented as examples of convergence and support for the role of adaptive evolution in shaping morphological and ecological diversity. Here we compare skull shape in a wide range of carnivoran placentals (Carnivora) and nonherbivorous marsupials using a three-dimensional (3-D) geometric morphometric approach. Morphological and ecological diversity among extant carnivorans is considerably greater than is evident in the marsupial order Dasyuromorphia with which they have most commonly been compared. To examine convergence across a wider, but broadly comparable range of feeding ecologies, a dataset inclusive of nondasyuromorphian marsupials and extinct taxa representing morphotypes no longer present was assembled. We found support for the adaptive paradigm, with correlations between morphology, feeding behavior, and bite force, although skull shape better predicted feeding ecology in the phylogenetically diverse marsupial sample than in carnivorans. However, we also show that remarkably consistent but differing constraints have influenced the evolution of cranial shape in both groups. These differences between carnivorans and marsupials, which correlate with brain size and bite force, are maintained across the full gamut of morphologies and feeding categories, from small insectivores and omnivores to large meat-specialists.     

Morphological patterns in the skulls of cats

Measurements on the skull and dentition of 159 specimens of 22 species of recent felid were analysed using multivariate statistical methods (principal components analysis and correspondence analysis). The resulting patterns were considered in the light of recent work on the systematics of felids (large cats and small cats were clearly differentiated). Within each group there are subgroups. In the small cat group one subgroup was found to consist of the species Lynx lynx, L. rufus, L. pardina, L. canadensis and possibly Felis manul. Another subgroup consisted of the species F. bengalensis, F. rubiginosa, F. planiceps and F. viverrina. These two subgroups agree well with other work on felid systematics. Subgroups which do not agree so well with other work were also found, and the reasons for this are considered. Within the large cats there are two species, F. concolor and Neofelis nebulosa , which are clearly deviant from the norm. The reasons for this deviation are also considered.     

Sexual shape dimorphism in the skull of the hooded seal Cystophora cristata

Multiple-group principal component analysis was used to investigate morphological differences between skulls of male and female hooded seals. The scores on the first principal axis (PCI), calculated from the variance-covariance matrix of log-transformed data, were highly correlated with age and the component was interpreted as a general growth axis. The other components had correlations between dimensions and component scores of different signs and magnitude and were interpreted as shape axes. The standardized component scores were subjected to analyses of variance and discriminant analyses. Sexual dimorphism was disclosed on eight of the components including PCI, and was functionally related mostly to the hood of the males.     

Mandible shape in marsupial and placental carnivorous mammals: a morphological comparative study using geometric morphometrics

We analysed mandible shape of the orders Dasyuromorpha, Didelphimorphia, and Carnivora using two‐dimensional geometric morphometrics, in order to explore the relationship between shape, size, and phylogeny. We studied 541 specimens, covering most of the genera of the terrestrial Carnivora (115 species) and a wide sample of marsupials (36 species). The observed shape variation had an ecological component. As an example, omnivorous carnivores have thick mandibles and large talonids in the carnassials, while hypercarnivores possess short mandibles and reduced talonids. There is also a discrimination between different taxonomic groups (i.e. marsupials and Carnivora), indicating some kind of constraint. Size explains a large percentage of total variance (large species had shorter and stronger mandibles, with anteriorly displaced carnassials), was significant when phylogeny was taken into account with a comparative method, but not when size and shape were optimized on the phylogeny. Carnivora presents a larger disparity and variation in body size, which could be related to the difference in teeth replacement. The optimization of mandible shape on the phylogenetic tree indicates that functional aspects, such as diet, are a key factor in the evolution of the carnivore mandible, but also that there is a phylogenetic pattern that cannot be explained by differences in diet alone. © 2011 The Linnean Society of London, Zoological Journal of the Linnean Society, 2012, 164 , 836–855.     

Climate and the evolution of skull metrics in man.

Two types of data, anthropometric and gene frequencies, may be used to reconstruct human evolution. Previous research, reconstructing the history of racial differentiation on the basis of gene frequencies, indicated that the major separation between human groups was that between Africans and Europeans on one side and peoples from Australia, East Asia and Americas on the other. A similar attempt by Howells ('73b), based on skull measurements in 17 ancient populations, in agreement with earlier anthropometric data, showed the major separation to be between Africans and Australians on one side and Europeans, Asians and Americans on the other. Climate could be a contributing factor to the observed differences in skull and anthropometric measurements. Howells' data showed high correlations with several climatic indicators. Carrying out the phylogenetic analysis after elimination by linear regression of the effects of climate has resolved to a great extent the discrepancy between anthropometric and gene frequency data.     

Differential sexual dimorphism: size and shape in the cranium and pelvis of grey foxes (Urocyon)

Patterns of sexual size dimorphism (SSD) and cranial dimorphism are well documented. However, limited examinations exist of the contrasts in the patterns and nature of dimorphism across body regions (e.g. cranium, pelvis), particularly when these regions have different sex-specific functions (e.g. display in mating, locomotion, and reproduction). Using landmark-based morphometric techniques, we investigated size and shape dimorphism variation in the crania and pelves of two closely-related fox species within the genus Urocyon . Although we found no significant size and shape dimorphism in the crania of either species, we did find significant dimorphism in the pelvis: its size was dimorphic in Urocyon littoralis (but not in Urocyon cinereoargenteus ) and its shape was dimorphic in both species (though more pronounced in U. littoralis ). The observation of greater dimorphism in the pelvis than in the cranium suggests that factors such as offspring size and locomotor mode play a greater role in sexual dimorphism than simple 'whole body' allometric affects associated with dimorphism in body size.  © 2009 The Linnean Society of London, Biological Journal of the Linnean Society , 2009, 96 , 339–353.     

Divergence in size,but not in shape: variation in skull size and shape within Ommatotriton newts

Using a geometric morphometric approach, we explored the variation in skull size and skull shape in banded newts (genus Ommatotriton). The genus Ommatotriton is represented by two allopatric, genetically well‐defined species: Ommatotriton ophryticus and O. vittatus. Within each species, two subspecies have been recognised. The samples used in this study cover the geographical and genetic variation within each species. We found statistically significant variation in skull size between species and among populations within species. When corrected for size, there was no significant variation in shape between species. Our results indicate that the variation in skull shape within the genus Ommatotriton is almost entirely due to size‐dependent, allometric shape changes. The exception is the shape of the ventral skull in males. Males of O. ophryticus and O. vittatus significantly diverge in the shape of the ventral cranium. The ventral skull, more precisely the upper jaw and palate, is directly functionally related to feeding. In general, our results indicate that allometry is a significant factor in the morphological variation of banded newts. However, the divergence in the ventral skull shape of males indicates that sexual selection and niche partitioning may have influenced the evolution of skull shape in these newts.     

Testing heterochrony: Connecting skull shape ontogeny and evolution of feeding adaptations in baleen whales

Ontogeny plays a key role in the evolution of organisms, as changes during the complex processes of development can allow for new traits to arise. Identifying changes in ontogenetic allometry—the relationship between skull shape and size during growth—can reveal the processes underlying major evolutionary transformations. Baleen whales (Mysticeti, Cetacea) underwent major morphological changes in transitioning from their ancestral raptorial feeding mode to the three specialized filter-feeding modes observed in extant taxa. Heterochronic processes have been implicated in the evolution of these feeding modes, and their associated specialized cranial morphologies, but their role has never been tested with quantitative data. Here, we quantified skull shapes ontogeny and reconstructed ancestral allometric trajectories using 3D geometric morphometrics and phylogenetic comparative methods on sample representing modern mysticetes diversity. Our results demonstrate that Mysticeti, while having a common developmental trajectory, present distinct cranial shapes from early in their ontogeny corresponding to their different feeding ecologies. Size is the main driver of shape disparity across mysticetes. Disparate heterochronic processes are evident in the evolution of the group: skim feeders present accelerated growth relative to the ancestral nodes, while Balaenopteridae have overall slower growth, or pedomorphosis. Gray whales are the only taxon with a relatively faster rate of growth in this group, which might be connected to its unique benthic feeding strategy. Reconstructed ancestral allometries and related skull shapes indicate that extinct taxa used less specialized filter-feeding modes, a finding broadly in line with the available fossil evidence.     

The evolution of encephalization in caniform carnivorans

A weighted-average model, which reliably estimates endocranial volume from three external measurements of the neurocranium of extant taxa in the mammalian order Carnivora, was tested for its applicability to fossil taxa by comparing model-estimated endocranial volumes to known endocast volumes. The model accurately reproduces endocast volumes for a wide array of fossil taxa across the crown radiation of the Carnivora, three stem carnivoramorphan taxa, and Pleistocene fossils of two extant species. Applying this model to fossil taxa without known endocast volumes expanded the sample of fossil taxa with estimated brain volumes in the carnivoran suborder Caniformia from 11 to 60 taxa. This then allowed a comprehensive assessment of the evolution of relative brain size across this clade. An allometry of brain volume to body mass was calculated on phylogenetically independent contrasts for the set of extant taxa, and from this, log-transformed encephalization quotients (logEQs) were calculated for all taxa, extant, and fossil. A series of Mann-Whitney tests demonstrated that the distributions of logEQs for taxa early in caniform evolutionary history possessed significantly lower median logEQs than extant taxa. Median logEQ showed a pronounced shift around the Miocene-Pliocene transition. Support tests, based on likelihood ratios, demonstrated that the variances of these distributions also were significantly lower than among modern taxa, but logEQ variance increased gradually through the history of the clade, not abruptly. Reconstructions of ancestral logEQs using weighted squared-change parsimony demonstrate that increased encephalization is observed across all major caniform clades (with the possible exception of skunks) and that these increases were achieved in parallel, although an "ancestor-descendant differencing" method could not rule out drift as a hypothesis. Peculiarities in the estimated logEQs for the extinct caniform family Amphicyonidae were also investigated; these unusual patterns are likely due to a unique allometry in scaling brain to body size in this single clade.     

Differences in mandibular disparity between extant and extinct species of metatherian and placental carnivore clades

There are a number of studies relating to skull morphology differences within the carnivoran clades of both placentals and metatherians. It is difficult to compare these studies because of differences in taxonomic sampling, for example some include fossil taxa while others include non‐carnivoran placentals. As a consequence, we studied mandible morphology in a broad range of both extant and extinct carnivorous species, including Carnivora, Marsupialia and Sparassodonta to test for differences between these clades. We used geometric morphometrics and two disparity indexes, the variance and Procrustes distances mean. When including fossil species, we found no significant differences for both disparities in some analyses, except after the exclusion of the sabretooth morphotype. This can be explained by the extreme morphology of this morphotype, which increases the variance and reduces the disparity effect of the other species in the analyses. Using Procrustes distances, we found significant differences in disparity distances between Carnivora and Metatheria for most of the analyses. We also found significant differences using the variance index in some analyses. The mandibular disparity in Carnivora is greater than in carnivorous metatherian mammals for most of the cases and this can be related with differences in evolutionary history and constraints of both groups. The pattern found in the mandible is similar to that found in the face of the skull but was not observed in the braincase, due to differences in skull function and mandible function.     

Size, shape and structural versatility of the skull of the subterranean rodent Ctenomys (Rodentia, Caviomorpha): functional and morphological analysis

Morphological analysis of the skull of the subterranean rodent Ctenomys , a highly speciose genus which uses both claws and teeth when digging, shows that for a broad range of species size, scaling was associated with both variation and maintenance of shape. Our results show that the angle of incisor procumbency (AIP), a character largely viewed as an adaptation to digging with teeth, is highly variable. We found a non-significant relationship between AIP and basicranial axis (basioccipital + basisphenoid) length, a measure of overall skull size. Accordingly, both small and large Ctenomys species possess either high or low AIP. A significant relationship between AIP and diastema length, given the rostral allometry seen in Ctenomys , suggests that hypermorphosis to a certain extent influences AIP. However, the roots of the incisor are lateral to those of the cheek teeth and their position may thus shift freely. This observation supports the notion that skull structural design, and to a certain extent rostral allometry, underlies variation in AIP. On the other hand, the positive allometry of incisor width and thickness indicates that, in larger species, proportionately powerful incisors are able to resist greater bending forces. We found that the out-lever arm of the jaw adductor muscles scales with positive allometry against basicranial axis length. However, we found an isometric relationship between in- and out-lever arms. In this case, conservation of skull proportions, regardless of variation in size, is a feature possibly related to the maintenance of an effective tooth digging capability. Functional and ecological data are discussed when assessing the implications of size and shape variation in the skull of Ctenomys .  © 2003 The Linnean Society of London. Biological Journal of the Linnean Society , 2003, 78 , 85−96.     

Morphological integration in the carnivoran skull

The correlated evolution of traits may be a principal factor in morphological evolution, but it is typically studied in genetic or developmental systems. Most studies examining phenotypic trait correlations, through analysis of morphological integration, consider only few taxa, with limited ability to test hypotheses of the influence of trait integration on morphological variation and diversity. The few comparative studies in less inclusive groups have yielded varying relationships of integration to the key factors of phylogeny and diet. In this paper, I present analyses of cranial morphological integration in 30 species from the mammalian order Carnivora, spanning eight extant families and a wide range of ecological and morphological diversity. Fifty-five cranial landmarks were captured through three-dimensional digitization of 15-22 specimens for each species. Using a node-based phylogenetic distance matrix, a significant correlation was found between similarity in patterns of integration and phylogenetic relatedness within Felidae (cats) and Canidae (dogs), but not within more inclusive clades, when size-related variation was removed. When size was included, significant correlations were found across all Caniformia, Musteloidea, Mustelidae, and Felidae. There was a significant correlation between phylogeny and morphological integration only within the higher-level clade Feliformia (cats, civets, mongooses, and hyaenas) when a branch-length-based phylogenetic distance matrix was analyzed, with and without size. In contrast, diet was significantly correlated with similarity in morphological integration in arctoid carnivorans (bears, raccoons, and weasels), but had no significant relationship with integration in feliforms or canids. These results support the proposition that evolutionary history is correlated with cranial integration across large clades, although in some smaller clades diet also exerts significant influence on the correlated evolution of traits.     

Correlations between habitat use and body shape in a phrynosomatid lizard (Urosaurus ornatus): a population-level analysis

Recent ecomorphological studies have shown that the predicted correlations between morphology and ecology on broad taxonomic levels are often obscured when comparing more closely related groups. Among species, comparisons of lizards often indicate very little support for adaptive radiations into novel habitats. As few population level studies have been performed, we compared body, head and limb shape between four populations of Urosaurus ornatus living in structurally distinct habitats (cliffs, rocks, trees and boulders). Surprisingly, clear correlations between habitat use and body shape among populations were found, most of which were in good accordance with a priori biomechanical predictions (e.g. flat body and head for extreme climbers; long distal hindlimb segments for jumpers and runners; narrow body and long tail for tree dwelling lizards). This indicates that populations of Urosaurus ornatus are seemingly 'adapted' to the habitat they live in. However, quantification of performance and behaviour are needed to determine the adaptive nature of these observations.     

Postmetamorphic ontogenetic allometry and the evolution of skull shape in Nest‐building frogs Leptodactylus (Anura: Leptodactylidae)

Allometry constitutes an important source of morphological variation. However, its influence in head development in anurans has been poorly explored. By using geometric morphometrics followed by statistical and comparative methods we analyzed patterns of allometric change during cranial postmetamorphic ontogeny in species of Nest‐building frogs Leptodactylus (Leptodactylidae). We found that the anuran skull is not a static structure, and allometry plays an important role in defining its shape in this group. Similar to other groups with biphasic life‐cycle, and following a general trend in vertebrates, ontogenetic changes mostly involve rearrangement in rostral, otoccipital, and suspensorium regions. Ontogenetic transformations are paralleled by shape changes associated with evolutionary change in size, such that the skulls of species of different intrageneric groups are scaled to each other, and small and large species show patterns of paedomorphic/peramorphic features, respectively. Allometric trajectories producing those phenotypes are highly evolvable though, with shape change direction and magnitude varying widely among clades, and irrespective of changes in absolute body size. These results reinforce the importance of large‐scale comparisons of growth patterns to understand the plasticity, evolution, and polarity of morphological changes in different clades.     

The pace of morphological change: historical transformation of skull shape in St Bernard dogs

Owing to the great morphological diversity of domestic dogs (Canis familiaris), the study of historical shape change in dog skulls provides an excellent opportunity for investigating the dynamics of morphological evolution. Breed standards make known which features were selected by breeders. Here we use the methods of geometric morphometrics to study change of skull shape in a series of purebred St Bernard dogs spanning nearly 120 years. A regression of shape on time was highly significant and revealed a consistent trend of shape change that corresponded to the features deemed desirable by the breed standard. Historical shape change in St Bernards involves a broadening of the skull and a tilting of the palate and upper jaw relative to the rest of the skull. This trend appears to be linear throughout the entire period and appears to be continuing. Allometry was ruled out as a contributing factor to this change because there was no consistent trend of historical change in skull size and because neither the patterns of static nor ontogenetic allometry corresponded to the historical shape change. The dramatic modification of the St Bernard skull demonstrates that selection can achieve sustained and substantial change and can completely overcome constraints such as allometry.