The major subunit of Escherichia coli type 1 fimbriae is not required for D-mannose-specific adhesion

Type 1 fimbriae are surface organelles on Escherichia coli, which mediate specific binding to D-mannose-containing structures. These fimbriae are heteropolymers composed of a major building element, the FimA protein, and small amounts of the FimF, FimG and FimH proteins. The FimH protein is uniquely responsible for the D-mannose receptor binding. In this work data are presented which indicate that the major subunit of type 1 fimbriae is dispensable for D-mannose-specific binding. A recombinant strain was studied which harboured an insertional deletion in the fimA gene, and was thereby unable to produce type 1 fimbriae; however, it was still able to express a D-mannose-binding phenotype. However, the deletion resulted in a 25-fold reduction of the adhesive potential, as measured by binding to D-mannose-coated Sepharose beads. Serological and specific receptor binding evidence is presented that suggests that the FimH adhesion is capable of being exposed on the bacterial surface without being an integral part of the fimbriae.     

Quantitative differences in adhesiveness of type 1 fimbriated Escherichia coli due to structural differences in fimH genes.

Type 1 fimbriae are heteropolymeric surface organelles responsible for the D-mannose-sensitive (MS) adhesion of Escherichia coli. We recently reported that variation of receptor specificity of type 1 fimbriae can result solely from minor alterations in the structure of the gene for the FimH adhesin subunit. To further study the relationship between allelic variation of the fimH gene and adhesive properties of type 1 fimbriae, the fimH genes from five additional strains were cloned and used to complement the FimH deletion in E. coli KB18. When the parental and recombinant strains were tested for adhesion to immobilized mannan, a wide quantitative range in the ability of bacteria to adhere was noted. The differences in adhesion do not appear to be due to differences in the levels of fimbriation or relative levels of incorporation of FimH, because these parameters were similar in low-adhesion and high-adhesion strains. The nucleotide sequence for each of the fimH genes was determined. Analysis of deduced FimH sequences allowed identification of two sequence homology groups, based on the presence of Asn-70 and Ser-78 or Ser-70 and Asn-78 residues. The consensus sequences for each group conferred very low adhesion activity, and this low-adhesion phenotype predominated among a group of 43 fecal isolates. Strains isolated from a different host niche, the urinary tract, expressed type 1 fimbriae that conferred an increased level of adhesion. The results presented here strongly suggest that the quantitative variations in MS adhesion are due primarily to structural differences in the FimH adhesin. The observed differences in MS adhesion among populations of E. coli isolated from different host niches call attention to the possibility that phenotypic variants of FimH may play a functional role in populations dynamics.     

The distinct binding specificities exhibited by enterobacterial type 1 fimbriae are determined by their fimbrial shafts

Type 1 fimbriae of enterobacteria are heteropolymeric organelles of adhesion composed of FimH, a mannose-binding lectin, and a shaft composed primarily of FimA. We compared the binding activities of recombinant clones expressing type 1 fimbriae from Escherichia coli, Klebsiella pneumoniae, and Salmonella typhimurium for gut and uroepithelial cells and for various soluble mannosylated proteins. Each fimbria was characterized by its capacity to bind particular epithelial cells and to aggregate mannoproteins. However, when each respective FimH subunit was cloned and expressed in the absence of its shaft as a fusion protein with MalE, each FimH bound a wide range of mannose-containing compounds. In addition, we found that expression of FimH on a heterologous fimbrial shaft, e.g. K. pneumoniae FimH on the E. coli fimbrial shaft or vice versa, altered the binding specificity of FimH such that it closely resembled that of the native heterologous type 1 fimbriae. Furthermore, attachment to and invasion of bladder epithelial cells, which were mediated much better by native E. coli type 1 fimbriae compared with native K. pneumoniae type 1 fimbriae, were found to be dependent on the background of the fimbrial shaft (E. coli versus K. pneumoniae) rather than the background of the FimH expressed. Thus, the distinct binding specificities of different enterobacterial type 1 fimbriae cannot be ascribed solely to the primary structure of their respective FimH subunits, but are also modulated by the fimbrial shaft on which each FimH subunit is presented, possibly through conformational constraints imposed on FimH by the fimbrial shaft. The capacity of type 1 fimbrial shafts to modulate the tissue tropism of different enterobacterial species represents a novel function for these highly organized structures.     

Identification of two ancillary subunits of Escherichia coli type 1 fimbriae by using antibodies against synthetic oligopeptides of fim gene products.

We have chemically synthesized oligopeptides corresponding to the NH2-terminal stretch of two gene products, designated FimG and FimH, of the fim gene cluster of Escherichia coli. These synthetic peptides, designated S-T1FimG(1-16) and S-T1FimH(1-25)C, evoked antibodies in rabbits that reacted with 14- and 29-kilodalton subunits, respectively, of dissociated fimbriae encoded by the recombinant plasmid pSH2 carrying the genetic information for the synthesis and expression of functional type 1 fimbriae. Neither of these fimbrial proteins was detected in dissociated fimbrial preparations from nonadhesive E. coli cells carrying the mutant plasmid pUT2002, containing a restriction site-specific deletion of fimG and fimH. Anti-S-T1FimH(1-25)C inhibited the adherence of type 1 fimbriated E. coli to epithelial cells. Immunoelectron microscopy revealed that anti-S-T1FimH(1-25)C, but not anti-S-T1FimG(1-16), bound to intact type 1 fimbriae of E. coli at the fimbrial tips and at long intervals along the fimbrial filaments. Anti-S-T1FimG(1-16) appeared to be directed at epitopes not accessible on the intact fimbriae and consequently failed to bind to intact fimbriae or to block fimbrial attachment. Our results suggest that the fimG and fimH gene products are components of type 1 fimbriae and that FimH may be the tip adhesin mediating the binding of type 1 fimbriated E. coli to D-mannose residues on mucosal surfaces.     

Amino acid residue Ala-62 in the FimH fimbrial adhesin is critical for the adhesiveness of meningitis-associated Escherichia coli to collagens

Adhesion of meningitis-associated Escherichia coli O18acK1H7 to collagens was characterized. The E. coli strain IHE 3034 adhered to type IV and type I collagens but not to type III collagen immobilized on glass. Collagens lack terminal mannosyl units, yet the bacterial adhesion was completely abolished in the presence of alpha-methyl-D-mannoside. A cat cassette was introduced into the filmA gene of IHE 3034, and the resulting mutant strain IHE 3034-2 failed to adhere to collagens. In contrast, insertion of a Gm cassette into the sfaA gene of IHE 3034, encoding the S-fimbrillin, had no significant effect on the adhesiveness. The fim cluster from IHE 3034 was cloned and expressed in trans in the fimA::cat mutant strain IHE 3034-2. The complemented strain IHE 3034-2(pRPO-1) exhibited adhesiveness to type IV and type I collagens, confirming the function of the type 1 fimbria in the adhesion. We have previously shown that the type 1 fimbria from E. coli K-12 strain PC31 does not confer bacterial adhesiveness to collagens. The fimH genes from E. coli IHE 3034 as well as from PC31 were expressed in the fimH-null strain MS4. The FimH from IHE 3034 potentiated collagen adherence, whereas the FimH from PC31 was inactive. Sequence comparison of fimH from IHE 3034 and PC31 revealed five amino-acid differences in the predicted mature FimH proteins: at residues 27, 62, 70, 78 and 201. Each of these residues in the IHE 3034-FimH were individually substituted to the corresponding amino acid in the PC31-FimH. The substitution S62-->A completely abolished collagen adhesiveness. The reverse substitution A62-->S in the PC31-FimH as well as in the FimH from another E. coli strain induced collagen adhesiveness to the level seen with IHE 3034-FimH. Out of nine fimH genes analysed from isolates of E. coli, collagen adhesiveness as well as alanine at position 62 in FimH were found only in two O18acK1H7 isolates with the isoenzyme profile ET type 1. Our results demonstrate that the amino-acid residue Ala-62 in the FimH lectin is critical for the adhesion to collagens by a highly virulent clonal group of E. coli.     

Recombinant Porphyromonas gingivalis FimA preproprotein expressed in Escherichia coli is lipidated and the mature or processed recombinant FimA protein forms a short filament in vitro

The gram-negative anaerobic bacterium Porphyromonas gingivalis is an etiologically important pathogen for chronic periodontal diseases in adults. Our previous study suggested that the major structural components of both Fim and Mfa fimbriae in this organism are secreted through their lipidated precursors. In this study, we constructed Escherichia coli strains expressing various fimA genes with or without the 5'-terminal DNA region encoding the signal peptide, and we determined whether lipidation of recombinant FimA proteins occurred in E. coli. Lipidation occurred for a recombinant protein from the fimA gene with the 5'-terminal DNA region encoding the signal peptide but not for a recombinant protein from the fimA gene without the signal-peptide-encoding region, as revealed by [3H]palmitic acid labeling experiments. A TLR2-dependent signaling response was induced by the recombinant protein from the fimA gene with the signal-peptide-encoding region but not by a recombinant protein from the fimA gene with the signal-peptide-encoding region that had a base substitution causing an amino acid substitution (C19A). Electron microscopic analysis revealed that recombinant FimA (A-47?- W-383) protein was autopolymerized to form filamentous structures of about 80?nm in length in vitro. The results suggest that FimA protein, a major subunit of Fim fimbriae, is transported to the outer membrane by the lipoprotein sorting system, and a mature or processed FimA protein on the outer membrane is autopolymerized to form Fim fimbriae.     

FimH-mediated Escherichia coli K1 invasion of human brain microvascular endothelial cells

Adhesion to brain microvascular endothelial cells, which constitute the blood-brain barrier is considered important in Escherichia coli K1 bacterial penetration into the central nervous system. Type 1 fimbriae are known to mediate bacterial interactions with human brain microvascular endothelial cells (HBMEC). Here, we demonstrate that type 1 fimbriae, specifically FimH adhesin is not only an adhesive organelle that provides bacteria with a foothold on brain endothelial cells but also triggers signalling events that promote E. coli K1 invasion in HBMEC. This is shown by our demonstrations that exogenous FimH increases cytosolic-free-calcium levels as well as activates RhoA. Using purified recombinant mannose-recognition domain of FimH, we identified a glycosylphosphatidylinositol-anchored receptor, CD48, as a putative HBMEC receptor for FimH. Furthermore, E. coli K1 binding to and invasion of HBMEC were blocked by CD48 antibody. Taken together, these findings indicate that FimH induces host cell signalling cascades that are involved in E. coli K1 invasion of HBMEC and CD48 is a putative HBMEC receptor for FimH.     

Valency conversion in the type 1 fimbrial adhesin of Escherichia coli

FimH protein is a lectin-like adhesive subunit of type 1, or mannose-sensitive, fimbriae that are found on the surface of most Escherichia coli strains. All naturally occurring FimH variants demonstrate a conserved mannotriose-specific (i.e. multivalent) binding. Here, we demonstrate that replacement of residues 185-279 within the FimH pilin domain with a corresponding segment of the type 1C fimbrial adhesin FocH leads to a loss of the multivalent mannotriose-specific binding property accompanied by the acquisition of a distinct monomannose-specific (i.e. monovalent) binding capability. Bacteria expressing the monovalent hybrid adhesins were capable of binding strongly to uroepithelial tissue culture cells and guinea pig erythrocytes. They could not, however, agglutinate yeast or bind human buccal cells -- functions readily accomplished by the E. coli-expressing mannotriose-specific FimH variants. Based on the relative potency of inhibiting compounds of different structures, the receptor binding site within monovalent FimH-FocH adhesin has an extended structure with an overall configuration similar to that within the multivalent FimH of natural origin. The monomannose-only specific phenotype could also be invoked by a single point mutation, E89K, located within the lectin domain of FimH, but distant from the receptor binding site. The structural alterations influence the receptor-binding valency of the FimH adhesin via distal effects on the combining pocket, obviously by affecting the FimH quaternary structure.     

Uncoiling mechanics of Escherichia coli type I fimbriae are optimized for catch bonds

We determined whether the molecular structures through which force is applied to receptor–ligand pairs are tuned to optimize cell adhesion under flow. The adhesive tethers of our model system, Escherichia coli, are type I fimbriae, which are anchored to the outer membrane of most E. coli strains. They consist of a fimbrial rod (0.3–1.5 μm in length) built from a helically coiled structural subunit, FimA, and an adhesive subunit, FimH, incorporated at the fimbrial tip. Previously reported data suggest that FimH binds to mannosylated ligands on the surfaces of host cells via catch bonds that are enhanced by the shear-originated tensile force. To understand whether the mechanical properties of the fimbrial rod regulate the stability of the FimH–mannose bond, we pulled the fimbriae via a mannosylated tip of an atomic force microscope. Individual fimbriae rapidly elongate for up to 10 μm at forces above 60 pN and rapidly contract again at forces below 25 pN. At intermediate forces, fimbriae change length more slowly, and discrete 5.0 ± 0.3–nm changes in length can be observed, consistent with uncoiling and coiling of the helical quaternary structure of one FimA subunit at a time. The force range at which fimbriae are relatively stable in length is the same as the optimal force range at which FimH–mannose bonds are longest lived. Higher or lower forces, which cause shorter bond lifetimes, cause rapid length changes in the fimbria that help maintain force at the optimal range for sustaining the FimH–mannose interaction. The modulation of force and the rate at which it is transmitted from the bacterial cell to the adhesive catch bond present a novel physiological role for the fimbrial rod in bacterial host cell adhesion. This suggests that the mechanical properties of the fimbrial shaft have codeveloped to optimize the stability of the terminal adhesive under flow.     

Uncoiling Mechanics of Escherichia coli Type I Fimbriae Are Optimized for Catch Bonds

We determined whether the molecular structures through which force is applied to receptor–ligand pairs are tuned to optimize cell adhesion under flow. The adhesive tethers of our model system, Escherichia coli, are type I fimbriae, which are anchored to the outer membrane of most E. coli strains. They consist of a fimbrial rod (0.3–1.5 μm in length) built from a helically coiled structural subunit, FimA, and an adhesive subunit, FimH, incorporated at the fimbrial tip. Previously reported data suggest that FimH binds to mannosylated ligands on the surfaces of host cells via catch bonds that are enhanced by the shear-originated tensile force. To understand whether the mechanical properties of the fimbrial rod regulate the stability of the FimH–mannose bond, we pulled the fimbriae via a mannosylated tip of an atomic force microscope. Individual fimbriae rapidly elongate for up to 10 μm at forces above 60 pN and rapidly contract again at forces below 25 pN. At intermediate forces, fimbriae change length more slowly, and discrete 5.0 ± 0.3–nm changes in length can be observed, consistent with uncoiling and coiling of the helical quaternary structure of one FimA subunit at a time. The force range at which fimbriae are relatively stable in length is the same as the optimal force range at which FimH–mannose bonds are longest lived. Higher or lower forces, which cause shorter bond lifetimes, cause rapid length changes in the fimbria that help maintain force at the optimal range for sustaining the FimH–mannose interaction. The modulation of force and the rate at which it is transmitted from the bacterial cell to the adhesive catch bond present a novel physiological role for the fimbrial rod in bacterial host cell adhesion. This suggests that the mechanical properties of the fimbrial shaft have codeveloped to optimize the stability of the terminal adhesive under flow.     

Linker insertion analysis of the FimH adhesin of type 1 fimbriae in an Escherichia coli fimH-null background

Abstract The gene encoding the Escherichia coli FimH adhesin of type 1 fimbriae has been subjected to linker insertion mutagenesis. Amino acid changes were introduced at a number of positions spanning the entire sequence in order to probe the structure-function relationship of the FimH protein. The effect of these mutations on the ability of bacteria to express a D-mannose binding phenotype was assessed in a fimH null mutant (MS4) constructed by allelic exchange in the E. coli K-12 strain PC31. Mutations mapping at amino acid residues 36, 58 and 279 of the mature FimH protein were shown to completely abolish binding to D-mannose receptors. Differences in the level of fimbriation were also observed as a result of some of the mutations in the fimH gene. These mutants may prove useful in dissecting receptor-ligand interactions by defining regions of the FimH protein that are important in erythrocyte binding.     

Porphyromonas gingivalis FimA Fimbriae: Fimbrial Assembly by fimA Alone in the fim Gene Cluster and Differential Antigenicity among fimA Genotypes

The periodontal pathogen Porphyromonas gingivalis colonizes largely through FimA fimbriae, composed of polymerized FimA encoded by fimA. fimA exists as a single copy within the fim gene cluster (fim cluster), which consists of seven genes: fimX, pgmA and fimA-E. Using an expression vector, fimA alone was inserted into a mutant from which the whole fim cluster was deleted, and the resultant complement exhibited a fimbrial structure. Thus, the genes of the fim cluster other than fimA were not essential for the assembly of FimA fimbriae, although they were reported to influence FimA protein expression. It is known that there are various genotypes for fimA, and it was indicated that the genotype was related to the morphological features of FimA fimbriae, especially the length, and to the pathogenicity of the bacterium. We next complemented the fim cluster-deletion mutant with fimA genes cloned from P. gingivalis strains including genotypes I to V. All genotypes showed a long fimbrial structure, indicating that FimA itself had nothing to do with regulation of the fimbrial length. In FimA fimbriae purified from the complemented strains, types I, II, and III showed slightly higher thermostability than types IV and V. Antisera of mice immunized with each purified fimbria principally recognized the polymeric, structural conformation of the fimbriae, and showed low cross-reactivity among genotypes, indicating that FimA fimbriae of each genotype were antigenically different. Additionally, the activity of a macrophage cell line stimulated with the purified fimbriae was much lower than that induced by Escherichia coli lipopolysaccharide.     

Integrin-like allosteric properties of the catch bond-forming FimH adhesin of Escherichia coli

FimH is the adhesive subunit of type 1 fimbriae of the Escherichia coli that is composed of a mannose-binding lectin domain and a fimbria-incorporating pilin domain. FimH is able to interact with mannosylated surface via a shear-enhanced catch bond mechanism. We show that the FimH lectin domain possesses a ligand-induced binding site (LIBS), a type of allosterically regulated epitopes characterized in integrins. Analogous to integrins, in FimH the LIBS epitope becomes exposed in the presence of the ligand (or "activating" mutations) and is located far from the ligand-binding site, close to the interdomain interface. Also, the antibody binding to the LIBS shifts adhesin from the low to high affinity state. Binding of streptavidin to the biotinylated residue within the LIBS also locks FimH in the high affinity state, suggesting that the allosteric perturbations in FimH are sustained by the interdomain wedging. In the presence of antibodies, the strength of bacterial adhesion to mannose is increased similar to the increase observed under shear force, suggesting the same allosteric mechanism, a shift in the interdomain configuration. Thus, an integrin-like allosteric link between the binding pocket and the interdomain conformation can serve as the basis for the catch bond property of FimH and, possibly, other adhesive proteins.     

The bacterial fimbrial tip acts as a mechanical force sensor

There is increasing evidence that the catch bond mechanism, where binding becomes stronger under tensile force, is a common property among non-covalent interactions between biological molecules that are exposed to mechanical force in vivo. Here, by using the multi-protein tip complex of the mannose-binding type 1 fimbriae of Escherichia coli, we show how the entire quaternary structure of the adhesive organella is adapted to facilitate binding under mechanically dynamic conditions induced by flow. The fimbrial tip mediates shear-dependent adhesion of bacteria to uroepithelial cells and demonstrates force-enhanced interaction with mannose in single molecule force spectroscopy experiments. The mannose-binding, lectin domain of the apex-positioned adhesive protein FimH is docked to the anchoring pilin domain in a distinct hooked manner. The hooked conformation is highly stable in molecular dynamics simulations under no force conditions but permits an easy separation of the domains upon application of an external tensile force, allowing the lectin domain to switch from a low- to a high-affinity state. The conformation between the FimH pilin domain and the following FimG subunit of the tip is open and stable even when tensile force is applied, providing an extended lever arm for the hook unhinging under shear. Finally, the conformation between FimG and FimF subunits is highly flexible even in the absence of tensile force, conferring to the FimH adhesin an exploratory function and high binding rates. The fimbrial tip of type 1 Escherichia coli is optimized to have a dual functionality: flexible exploration and force sensing. Comparison to other structures suggests that this property is common in unrelated bacterial and eukaryotic adhesive complexes that must function in dynamic conditions.     

A potential role of Escherichia coli pathobionts in the pathogenesis of pediatric inflammatory bowel disease

Through genomic analysis of mucosa-associated Escherichia coli strains, we found a close genetic association among isolates from pediatric inflammatory bowel disease (IBD) patients. A specific E. coli pathovar, adherent-invasive E. coli (AIEC), was found in Crohn's disease (CD) adult patients - this pathovar has enhanced adhesive and invasive properties, mainly due to the mannose-bonding FimH protein. We aimed to characterize 52 mucosa-associated E. coli strains isolated from pediatric IBD and non-IBD patients. Eleven E. coli strains, showing a strong similarity in fimH gene sequence to that of E. coli AIEC LF82, were characterized for fimH gene sequence, genomic profiling, adhesive and invasive ability, and phylogrouping. The results were compared with E. coli strains AIEC LF82 and MG1655. The 11 E. coli isolates showed 82.4% ± 1.4% fimH sequence similarity and 80.6% ± 1.3% genomic similarity to strain AIEC LF82. All these strains harbored V27A and S78N FimH mutations, as found in LF82. Nine of them belonged to the more virulent B2 and D phylogroups. Neuraminidase treatment, mimicking inflamed mucosa, enhanced adhesion of all 11 strains by 3.5-fold, but none showed invasion ability. It could be argued that the 11 selected strains could be a branch of an E. coli subpopulation (pathobionts), that could take advantage in an inflamed context because of a suitable genomic and (or) genetic backdrop.     

Exploring the 3D molecular architecture of Escherichia coli type 1 pili

An integrated approach combining information gained by Fourier transformation, linear Markham superposition (real space) and mass-per-length measurement by scanning transmission electron microscopy was used to analyze the helical structure of the rod-like type 1 pili expressed by uropathogenic Escherichia coli strain W3110. The 3D reconstruction calculated from the experimental data showed the pili to be 6.9nm wide, right-handed helical tubes with a 19.31(+/-0.34)nm long helical repeat comprising 27 FimA monomers associated head-to-tail in eight turns of the genetic one-start helix. Adjacent turns of the genetic helix are connected via three binding sites making the pilus rod rather stiff. In situ immuno-electron microscopy experiments showed the minor subunit (FimH) mediating pilus adhesion to bladder epithelial cells to be the distal protein of the pilus tip, which had a spring-like appearance at higher magnification. The subunits FimG and FimF connect FimH to the FimA rod, the sequential orientation being FimA-FimF-FimG-FimH. The electron density map calculated at 18A resolution from an atomic model of the pilus rod (built using the pilin domain FimH together with the G1 strand of FimC as a template for FimA and applying the optimal helical parameters determined to the head-to-tail interaction model for pilus assembly) was practically identical with that of the actual 3D reconstruction.     

Allosteric catch bond properties of the FimH adhesin from Salmonella enterica serovar Typhimurium

Despite sharing the name and the ability to mediate mannose-sensitive adhesion, the type 1 fimbrial FimH adhesins of Salmonella Typhimurium and Escherichia coli share only 15% sequence identity. In the present study, we demonstrate that even with this limited identity in primary sequence, these two proteins share remarkable similarity of complex receptor binding and structural properties. In silico simulations suggest that, like E. coli FimH, Salmonella FimH has a two-domain tertiary structure topology, with a mannose-binding pocket located on the apex of a lectin domain. Structural analysis of mutations that enhance S. Typhimurium FimH binding to eukaryotic cells and mannose-BSA demonstrated that they are not located proximal to the predicted mannose-binding pocket but rather occur in the vicinity of the predicted interface between the lectin and pilin domains of the adhesin. This implies that the functional effect of such mutations is indirect and probably allosteric in nature. By analogy with E. coli FimH, we suggest that Salmonella FimH functions as an allosteric catch bond adhesin, where shear-induced separation of the lectin and pilin domains results in a shift from a low affinity to a high affinity binding conformation of the lectin domain. Indeed, we observed shear-enhanced binding of whole bacteria expressing S. Typhimurium type 1 fimbriae. In addition, we observed that anti-FimH antibodies activate rather than inhibit S. Typhimurium FimH mannose binding, consistent with the allosteric catch bond properties of this adhesin.