In situ DNA amplification with magnetic primers for the electrochemical detection of food pathogens

A sensitive and selective genomagnetic assay for the electrochemical detection of food pathogens based on in situ DNA amplification with magnetic primers has been designed. The performance of the genomagnetic assay was firstly demonstrated for a DNA synthetic target by its double-hybridization with both a digoxigenin probe and a biotinylated capture probe, and further binding to streptavidin-modified magnetic beads. The DNA sandwiched target bound on the magnetic beads is then separated by using a magneto electrode based on graphite-epoxy composite. The electrochemical detection is finally achieved by an enzyme marker, anti-digoxigenin horseradish peroxidase (HRP). The novel strategy was used for the rapid and sensitive detection of polymerase chain reaction (PCR) amplified samples. Promising resultants were also achieved for the DNA amplification directly performed on magnetic beads by using a novel magnetic primer, i.e., the up PCR primer bound to magnetic beads. Moreover, the magneto DNA biosensing assay was able to detect changes at single nucleotide polymorphism (SNP) level, when stringent hybridization conditions were used. The reliability of the assay was tested for Salmonella spp., the most important pathogen affecting food safety.     

Sensitive detection of proteins using assembled cascade fluorescent DNA nanotags based on rolling circle amplification

A novel cascade fluorescence signal amplification strategy based on the rolling circle amplification (RCA)-aided assembly of fluorescent DNA nanotags as fluorescent labels and multiplex binding of the biotin-streptavidin system was proposed for detection of protein target at ultralow concentration. In the strategy, fluorescent DNA nanotags are prepared relying on intercalating dye arrays assembled on nanostructured DNA templates by intercalation between base pairs. The RCA product containing tandem-repeat sequences could serve as an excellent template for periodic assembly of fluorescent DNA nanotags, which were presented per protein recognition event to numerous fluorescent DNA nanotags for assay readout. Both the RCA and the multiplex binding system showed remarkable amplification efficiency, very little nonspecific adsorption, and low background signal. Using human IgG as a model protein, the designed strategy was successfully demonstrated for the ultrasensitive detection of protein target. The results revealed that the strategy exhibited a dynamic response to human IgG over a three-decade concentration range from 1.0 pM to 1.0 fM with a limit of detection as low as 0.9 fM. By comparison with the assay of multiple labeling antibodies with the dye/DNA conjugate, the limit of detection was improved by 4 orders. The designed signal amplification strategy would hold great promise as a powerful tool to be applied for the ultrasensitive detection of target protein in immunoassay.     

Fluorescent bio-barcode DNA assay for the detection of Salmonella enterica serovar Enteritidis

Salmonella enterica serovar Enteritidis is one of the most frequently reported causes of foodborne illness. It is a major threat to the food safety chain and public health. A highly amplified bio-barcode DNA assay for the rapid detection of the insertion element (Iel) gene of Salmonella Enteritidis is reported in this paper. The biosensor transducer is composed of two nanoparticles: gold nanoparticles (Au-NPs) and magnetic nanoparticles (MNPs). The Au-NPs are coated with the target-specific DNA probe which can recognize the target gene, and fluorescein-labeled barcode DNA in a 1:100 probe-to-barcode ratio. The MNPs are coated with the 2nd target-specific DNA probe. After mixing the nanoparticles with the 1st target DNA, the sandwich structure (MNPs-2nd DNA probe/Target DNA/1st DNA probe-Au-NPs-barcode DNA) is formed. A magnetic field is applied to separate the sandwich from the unreacted materials. Then the bio-barcode DNA is released from the Au-NPs. Because the Au-NPs have a large number of barcode DNA per DNA probe binding event, there is substantial amplification. The released barcode DNA is measured by fluorescence. Using this technique, the detection limit of this bio-barcode DNA assay is as low as 2.15 x 10(-16)mol (or 1 ng/mL).     

A comparative study of PCR product detection and quantitation by electrochemiluminescence and fluorescence

Amplification and detection of target DNA sequences are made possible in a polymerase chain reaction (PCR) by using a mixture of biotinylated and ruthenium(II) trisbipyridal (Ru(bpy)₃²⁺)-end-labelled primers. In this way, biotin for capture and Ru(bpy)₃²⁺ for detection are directly incorporated into the PCR product obviating subsequent probe hybridization. PCR of a bacterial DNA template from Alteromonas species strain JD6.5 using a cocktail of biotin- and Ru(bpy)₃²⁺-labelled primers amplified a 1 kilobase region. Serial dilution of PCR product followed by magnetic separation with Streptavidin (SA)-coated magnetic beads and an electrochemiluminescence (ECL) assay using the semi-automated QPCR System 5000 demonstrated sensitive (pg range) DNA detection. ECL assay of probe hybridization to a human immunodeficiency virus (HIV) sequence also produced pg level sensitivity. Quantitative DNA determination by ECL assay correlated well with visual detection of DNA in electrophoretic gels. However, DNA detection by ECL assay was 10 to 100 times more sensitive than conventional ethidium bromide staining. The combination of DNA-based magnetic separation with ECL assay provides a very sensitive and rapid method of quantitating DNA which, owing to its rapid and facile nature, may have many applications in the research, environmental monitoring, industrial and clinical fields.     

Aptamer-based bio-barcode assay for the detection of cytochrome-c released from apoptotic cells

The recently developed bio-barcode (BBC) assay using polymerase chain reaction (PCR) to generate signals has been shown to be an extraordinarily sensitive method to detect protein targets. The BBC assay involves a magnetic microparticle (with antibody to capture the target of interest) and gold nanoparticle (with recognition antibody and thiolated single-stranded barcode DNAs) to form a sandwich around the target. The concentration of target is determined by the amount of barcode DNA released from the nanoparticles. Here we describe a modification using aptamers to substitute the gold nanoparticles for the BBC assay. In this study, we isolated a 76-mer monoclonal aptamer against cytochrome-c (cyto-c) and this single-stranded DNA in defined 3D structure for cyto-c was used in the BBC assay for both recognition and readout reporting. After magnetic separation, the aptamer was amplified by PCR and this aptamer-based barcode (ABC) assay was sensitive enough to detect the cyto-c in culture medium released from the apoptotic cells after drug treatment at the picomolar level. When compared to the conventional cyto-c detection by Western blot analysis, our ABC assay is sensitive, and time for the detection and quantification with ready-made probes was only 3 h.     

Colorimetric detection of the tuberculosis complex using cycling probe technology and hybridization in microplates

Cycling probe technology (CPT) is a simple signal amplification method for the detection of specific target DNA sequences. CPT uses a chimeric DNA-RNA-DNA probe that is cut by RNase H when bound to its complementary target sequence. In this study, a hybridization assay was developed to detect biotinylated CPT products that result from the amplification of a Mycobacterium tuberculosis complex sequence. The chimeric probe was specifically designed to avoid the formation of secondary structures. The chosen capture probe was perfectly complementary to and was the same size as OL2, one of the two CPT products. The assay was based on the observation that a long sequence, such as the initial probe, was destabilized when bound to a small capture probe as a result of steric hindrance. The capture probe preferentially bound OL2 rather than the long initial probe. We added a prehybridization step with a helper DNA to enhance this discrimination between the two sequences. Colorimetric detection was performed using a peroxidase-streptavidin conjugate. After optimization, the non-isotopic hybridization assay allowed the detection of around 10 amol of target DNA. Besides being faster and easier to perform, this detection method was compared to electrophoresis separation and gave similar results.     

Giant magnetoresistive biochip for DNA detection and HPV genotyping

A giant magnetoresistive (GMR) biochip based on spin valve sensor array and magnetic nanoparticle labels was developed for inexpensive, sensitive and reliable DNA detection. The DNA targets detected in this experiment were PCR products amplified from Human Papillomavirus (HPV) plasmids. The concentrations of the target DNA after PCR were around 10nM in most cases, but concentrations of 10pM were also detectable, which is demonstrated by experiments with synthetic DNA samples. A mild but highly specific surface chemistry was used for probe oligonucleotide immobilization. Double modulation technique was used for signal detection in order to reduce the 1/f noise in the sensor. Twelve assays were performed with an accuracy of approximately 90%. Magnetic signals were consistent with particle coverage data measured with Scanning Electron Microscopy (SEM). More recent research on microfluidics showed the potential of reducing the assay time below one hour. This is the first demonstration of magnetic DNA detection using plasmid-derived samples. This study provides a direct proof that GMR sensors can be used for biomedical applications.     

A one-step electrochemical method for DNA detection that utilizes a peroxidase-mimicking DNAzyme amplified through PCR of target DNA

A novel one-step electrochemical method for DNA detection is described. The procedure utilizes a reaction catalyzed by a peroxidase-mimicking DNAzyme to produce a product, which forms an insoluble precipitation layer on the surface of an electrode. A rationally designed forward primer, conjugated with a peroxidase DNAzyme complementary sequence at its 5′-end, is used for PCR amplification of target DNA. As a result, the DNAzyme sequence is produced by amplification only when the target DNA is present in the sample. The PCR product is then subjected to the precipitation reaction on the electrode surface using an electrolyte assay buffer containing 4-chloronaphthol, hydrogen peroxide, ferrocenemethanol, hemin, and 5′-lambdaexonuclease. Finally, analysis is carried out using Faradaic impedance spectroscopy. The impedance value was found to greatly increase when target DNA is present owing to the formation of a precipitation layer on the electrode surface caused by the catalytic action of the DNAzyme. In contrast, no impedance increase is observed when a control sample not containing target DNA is utilized. By employing this strategy, target DNA from Chlamydia trachomatis was reliably detected within a 10 min period following precipitation without the need for complicated secondary procedures. This effort has led to the development of a highly convenient electrochemical one-step method for DNA detection that utilizes a peroxidase-mimicking DNAzyme, which is specifically designed to undergo amplification during PCR of target DNA.     

Fluorescent detection of cyanobacterial DNA using bacterial magnetic particles on a MAG-microarray

Bacterial magnetic particles (BMPs) were used for the identification of cyanobacterial DNA. Genus-specific oligonucleotide probes for the detection of Anabaena spp., Microcystis spp., Nostoc spp., Oscillatoria spp., and Synechococcus spp. were designed from the variable region of the cyanobacterial 16S rDNA of 148 strains. These oligonucleotide probes were immobilized on BMPs via streptavidin-biotin conjugation and employed for magnetic-capture hybridization against digoxigenin-labeled cyanobacterial 16S rDNA. Bacterial magnetic particles were magnetically concentrated, spotted in 100-microm-size microwell on MAG-microarray, and the fluorescent detection was performed. This work details the development of an automated technique for the magnetic isolation, the concentration of hybridized DNA, and the detection of specific target DNA on MAG-microarray. The entire process of hybridization and detection was automatically performed using a magnetic-separation robot and all five cyanobacterial genera were successfully discriminated.     

A DNA sequence-specific electrochemical biosensor based on alginic acid-coated cobalt magnetic beads for the detection of E. coli

A new type of DNA sequence-specific electrochemical biosensor based on magnetic beads for the detection of Escherichia coli is reported in the present work. Alginic acid-coated cobalt magnetic beads, capped with 5'-(NH(2)) oligonucleotide and employed not only for magnetic separation but also as the solid adsorbent, were used as DNA probes to hybridize with the target E. coli DNA sequence. This assay was specific for E. coli detection depending on the uid A gene, which encodes for the enzyme β-d-glucuronidase produced by E. coli strains. When daunomycin (DNR) was used as DNA hybridization indicator, the target sequences of E. coli hybridized with the probes resulted in the decrease of DNR reduction peak current, which was proportional to the E. coli concentration. The optimization of the hybridization detection was carried out and the specificity of the probes was also demonstrated. This DNA biosensor can be employed to detect a complementary target sequence for 3.0×10(-10) mol/L and denatured PCR products for 0.5 ng/μL. The linear range of the developed biosensor for the detection of E. coli cells was from 1.0×10(2) to 2.0×10(3) cells/mL with a detection limit of 50 cells/mL. After a brief enrichment process, a concentration of 10 cells/mL E. coli in real water samples was detected by the electrochemical biosensor.     

An exonuclease III and graphene oxide-aided assay for DNA detection

We have developed a novel DNA assay based on exonuclease III (ExoIII)-induced target recycling and the fluorescence quenching ability of graphene oxide (GO). This assay consists of a linear DNA probe labeled with a fluorophore in the middle. Introduction of target sequence induces the exonuclease III catalyzed probe digestion and generation of single nucleotides. After each cycle of digestion, the target is recycled to realize the amplification. Finally, graphene oxide is added to quench the remaining probes and the signal from the resulting fluorophore labeled single nucleotides is detected. With this approach, a sub-picomolar detection limit can be achieved within 40 min at 37°C. The method was successfully applied to multicolor DNA detection and the analysis of telomerase activity in extracts from cancer cells.     

Hybridization signal enhancement via long-stranded probe for detection of DNA using aquadichloro (benzimidazole)-copper(II) as hybridization indicator

A simple and sensitive method for electrochemical detection of DNA was designed. This DNA sensor was based on a "sandwich" detection strategy, which involved a long capture probe DNA immobilized on glassy carbon electrodes that flanked both the reference DNA and target DNA. Electrochemical signals were measured by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) using aquadichloro(benzimidazole)-copper(II), Cu(bzim)(H(2)O)Cl(2), as an electroactive indicator. An improving amount of Cu(bzim)(H(2)O)Cl(2) was interacted with the hybrid DNA via the incorporation of a long-probe DNA and a reference DNA in this sensor. As a result of this effect, this sensor design significantly enhanced the sensitivity. With 48-mer probe DNA and 27-mer reference DNA, the proposed method could be used for detection of 21-mer ssDNA ranging from 1.32 x 10(-7) to 2.52 x 10(-6) M with a detection limit of 2.94 x 10(-8) M. Electrochemical DNA biosensors were also developed using the same long-probe sequence as the target sequence with the novel hybridization indicator, Cu(bzim) (H(2)O)Cl(2). The detection limits for the complementary 21-mer target and 27-mer target were 9.52 x 10(-8) M and 5.81 x 10(-8) M, respectively. The results showed that the sensor with long-probe DNA and reference DNA is far more sensitive than that with nonswitch assay.     

Real-time colorimetric detection of target DNA using isothermal target and signaling probe amplification and gold nanoparticle cross-linking assay

We describe a facile gold nanoparticle (AuNP)-mediated colorimetric method for real-time detection of target DNA in conjugation with our unique isothermal target and signaling probe amplification (iTPA) method, comprising novel ICA (isothermal chain amplification) and CPT (cycling probe technology). Under isothermal conditions, the iTPA simultaneously amplifies the target and signaling probe through two displacement events induced by a combination of four specially designed primers, the strand displacement activity of DNA polymerase, and the RNA degrading activity of RNase H. The resulting target amplicons are hybridized with gold nanoparticle cross-linking assay (GCA) probes having a DNA-RNA-DNA chimeric form followed by RNA cleavage by RNase H in the CPT step. The intact GCA probes were designed to cross-link two sets of DNA-AuNPs conjugates in the absence of target DNA, inducing aggregation (blue color) of AuNPs. On the contrary, the presence of target DNA leads to cleavage of the GCA probes in proportion to the amount of amplified target DNA and the solution remains red in color without aggregation of AuNPs. Relying on this strategy, 10(2) copies of target Chlamydia trachomatis plasmid were successfully detected in a colorimetric manner. Importantly, all the procedures employed up to the final detection of the target DNA were performed under isothermal conditions without requiring any detection instruments. Therefore, this strategy would greatly benefit convenient, real-time monitoring technology of target DNA under restricted environments.     

Loop‐mediated isothermal amplification for the rapid detection of Gardnerella vaginalis

The aim of this study was to develop a method for the rapid detection of Gardnerella vaginalis, which is proposed to play a key role in the pathogenesis of bacterial vaginosis. Specific loop‐mediated isothermal amplification (LAMP) primers were designed and used to detect target DNA within 45 min under isothermal conditions. Comparative screening indicated that the LAMP assay is superior to PCR in terms of rapidity, and is equivalent in sensitivity and specificity. This LAMP assay can be used for rapid screening and detection of G. vaginalis in vaginal samples; the limit of detection is 10 fg DNA.

     

Label-free and high-sensitive detection of Salmonella using a surface plasmon resonance DNA-based biosensor

A method based on surface plasmon resonance (SPR) DNA biosensor has been developed for label-free and high-sensitive detection of Salmonella. A biotinylated single-stranded oligonucleotide probe was designed to target a specific sequence in the invA gene of Salmonella and then immobilized onto a streptavidin coated dextran sensor surface. The invA gene was isolated from bacterial cultures and amplified using a modified semi-nested asymmetric polymerase chain reaction (PCR) technique. In order to investigate the hybridization detection, experiments with different concentration of synthetic target DNA sequences have been performed. The calibration curve of synthetic target DNA had good linearity from 5 nM to 1000 nM with a detection limit of 0.5 nM. The proposed method was applied successfully to the detection of single-stranded invA amplicons from three serovars of Salmonella, i.e., Typhimurium, Enterica and Derby, and the responses to PCR products were related to different S. typhimurium concentrations in the range from 10(2) to 10(10) CFU mL(-1). While with this system to detect E. coli and S. aureus, no significant signal was observed, demonstrating good selectivity of the method. In addition, the hybridization can be completed within 15 min, and the excellent sensor surface regeneration allows at least 300 assay cycles without obvious loss of performance.     

A lateral flow biosensor for rapid detection of DNA-binding protein c-jun

A lateral flow biosensor based on an immuno-chromatographic assay has been developed for the detection of DNA-binding proteins. The biosensor is composed of four parts: a sample pad, a conjugate pad, a strip of nitrocellulose membrane and an absorbent pad. A DNA probe containing a specific protein binding consensus sequence is coated onto gold nanoparticles, while an antibody against the DNA-binding protein is immobilized onto a test zone of the nitrocellulose membrane. The target protein binds to the protein binding DNA sequence that is coated on the gold nanoparticles to form nanoparticle-DNA-protein complexes, and the complexes are then captured by the antibody immobilized on the test zone to form a red line for visual detection of the target protein. This biosensor was successfully applied to a DNA-binding protein, c-jun, and the developed biosensor allows for the rapid detection of down to 0.2 footprint unit of c-jun protein within 10 min. This biosensor was verified using HeLa cells and it visually detected c-jun activity in 100 μg of crude cell lysate protein. The antibody against c-jun used in the biosensor can distinguish c-jun from other nonspecific proteins, with high specificity.     

Magnetic scanometric DNA microarray detection of methyl tertiary butyl ether degrading bacteria for environmental monitoring

A magnetoresistive biosensing platform based on a single magnetic tunnel junction (MTJ) scanning probe and DNA microarrays labeled with magnetic particles has been developed to provide an inexpensive, sensitive and reliable detection of DNA. The biosensing platform was demonstrated on a DNA microarray assay for quantifying bacteria capable of degrading methyl tertiary butyl ether (MTBE), where concentrations as low as 10 pM were detectable. Synthetic probe bacterial DNA was immobilized on a microarray glass slide surface, hybridized with the 48 base pair long biotinylated target DNA and subsequently incubated with streptavidin-coated 2.8 μm diameter magnetic particles. The biosensing platform then makes use of a micron-sized MTJ sensor that was raster scanned across a 3 mm by 5 mm glass slide area to capture the stray magnetic field from the tagged DNA and extract two dimensional magnetic field images of the microarray. The magnetic field output is then averaged over each 100 μm diameter DNA array spot to extract the magnetic spot intensity, analogous to the fluorescence spot intensity used in conventional optical scanners. The magnetic scanning result is compared with results from a commercial laser scanner and particle coverage optical counting to demonstrate the dynamic range and linear sensitivity of the biosensing platform as a potentially inexpensive, sensitive and portable alternative for DNA microarray detection for field applications.     

Development of real-time assays for impedance-based detection of microbial double-stranded DNA targets: optimization and data analysis

A real-time, label free assay was developed for microbial detection, utilizing double-stranded DNA targets and employing the next generation of an impedimetric sensor array platform designed by Sharp Laboratories of America (SLA). Real-time curves of the impedimetric signal response were obtained at fixed frequency and voltage for target binding to oligonucleotide probes attached to the sensor array surface. Kinetic parameters of these curves were analyzed by the integrated data analysis package for signal quantification. Non-specific binding presented a major challenge for assay development, and required assay optimization. For this, differences were maximized between binding curve kinetic parameters for probes binding to complementary targets versus non-target controls. Variables manipulated for assay optimization included target concentration, hybridization temperature, buffer concentration, and the use of surfactants. Our results showed that (i) different target-probe combinations required optimization of specific sets of variables; (ii) for each assay condition, the optimum range was relatively narrow, and had to be determined empirically; and (iii) outside of the optimum range, the assay could not distinguish between specific and non-specific binding. For each target-probe combination evaluated, conditions resulting in good separation between specific and non-specific binding signals were established, generating high confidence in the SLA impedimetric dsDNA assay results.