Substrate dependent production of extracellular biosurfactant by a marine bacterium

The potential of a marine microorganism to utilize different carbon substrates for the production of an extracellular biosurfactant was evaluated. Among the several carbon substrates tested for this purpose, production of the crude biosurfactant was found to be highest with glycerol (2.9+/-0.11 g L(-1)) followed by starch (2.5+/-0.11 g L(-1)), glucose (1.16+/-0.11 g L(-1)) and sucrose (0.94+/-0.07 g L(-1)). The crude biosurfactant obtained from glycerol, starch and sucrose media had significantly higher antimicrobial action than those obtained from glucose containing medium. RP-HPLC resolved the crude biosurfactants into several fractions one of which had significant antimicrobial action. The antimicrobial fraction was found in higher concentrations in biosurfactant obtained using glycerol, starch and sucrose as compared to the biosurfactants from glucose medium, thereby explaining higher antimicrobial activity. The carbon substrate was thus found to affect biosurfactant production both in a qualitative and quantitative manner.     

Isolation and Characterization of Biosurfactant-and Bioemulsifier-Producing Bacteria from Petroleum Contaminated Sites in Western Canada

Biosurfactant-producing bacteria were isolated from two petroleum contaminated sites in western Canada. Seven potential biosurfactant/bioemulsifier-producing isolates were screened and characterized. All of the seven isolates were able to form emulsions. Emulsion-stabilizing capacity was also measured up to 48 hrs. Strain C-111-2 and C-203-2 would lead to highly reduced surface tension. For strain C-203-2, the optimum conditions that supported bacteria growth and production were investigated. The influences of carbon sources, medium pH values, and temperature were taken into account. The experimental results indicated that the crude oil and glucose were promising carbon sources for biosurfactants production; the isolated strains produced a maximum concentration of biosurfactant in a neutral pH environment and showed a higher surface activity under the temperature level of 35°C than that under 10°C. To further optimize the carbon and nitrogen source for biosurfactant production, response surface methodology (RSM) was applied to explore the favorable concentration of two carbon sources: glucose, crude oil, and one nitrogen source, NaNO₃. The optimal concentration of 8.1g/L, 4% and 3.9 g/L for glucose, crude oil, and NaNO₃, respectively, which can be obtained through RSM analysis.     

Clarified cashew apple juice as alternative raw material for biosurfactant production by Bacillus subtilis in a batch bioreactor

Clarified cashew apple juice was evaluated as carbon source for surfactin production by Bacillus subtilis LAMI005 isolated from the tank of chlorination at the Wastewater Treatment Plant on Campus do Pici (WWTP-PICI) in the Federal University of Ceará, Brazil. The highest surfactin concentration using clarified cashew apple juice (CCAJ) supplemented with mineral medium (MM-CCAJ) was 123 mg/L, achieved after 48 h of fermentation. Almost 2-fold less than the amount produced using mineral medium supplemented with 10 g/L of glucose and 8.7 g/L of fructose (MM-GF). However, critical micelle concentration of the biosurfactants produced using MM-CCAJ was 2.5-fold lower than the one produced using MM-GF, which indicates it is a more efficient biosurfactant. Surface tension decreased from 38.50 ± 0.0 to 29.00 ± 0.0 dyne/cm when B. subtilis was grown on MM-CCAJ media (24.68% of reduction on surface tension) and remained constant up to 72 h. Emulsification index was 51.15 and 66.70% using soybean oil and kerosene, respectively. Surfactin produced in MM-CCAJ showed an emulsifying activity of, respectively, 1.75 and 2.3 U when n-hexadecane or soybean oil was tested. However, when mineral medium supplemented with 10 g/L of glucose (MM-G) was used an emulsifying activity of 2.0 and 1.75 U, with n-hexadecane and soybean oil, respectively, was obtained. These results indicate that it is feasible to produce surfactin from CCAJ, a renewable and low-cost carbon source.     

In situ biosurfactant production by Bacillus strains injected into a limestone petroleum reservoir

Biosurfactant-mediated oil recovery may be an economic approach for recovery of significant amounts of oil entrapped in reservoirs, but evidence that biosurfactants can be produced in situ at concentrations needed to mobilize oil is lacking. We tested whether two Bacillus strains that produce lipopeptide biosurfactants can metabolize and produce their biosurfactants in an oil reservoir. Five wells that produce from the same Viola limestone formation were used. Two wells received an inoculum (a mixture of Bacillus strain RS-1 and Bacillus subtilis subsp. spizizenii NRRL B-23049) and nutrients (glucose, sodium nitrate, and trace metals), two wells received just nutrients, and one well received only formation water. Results showed in situ metabolism and biosurfactant production. The average concentration of lipopeptide biosurfactant in the produced fluids of the inoculated wells was about 90 mg/liter. This concentration is approximately nine times the minimum concentration required to mobilize entrapped oil from sandstone cores. Carbon dioxide, acetate, lactate, ethanol, and 2,3-butanediol were detected in the produced fluids of the inoculated wells. Only CO(2) and ethanol were detected in the produced fluids of the nutrient-only-treated wells. Microbiological and molecular data showed that the microorganisms injected into the formation were retrieved in the produced fluids of the inoculated wells. We provide essential data for modeling microbial oil recovery processes in situ, including growth rates (0.06 +/- 0.01 h(-1)), carbon balances (107% +/- 34%), biosurfactant production rates (0.02 +/- 0.001 h(-1)), and biosurfactant yields (0.015 +/- 0.001 mol biosurfactant/mol glucose). The data demonstrate the technical feasibility of microbial processes for oil recovery.     

Strain of Pseudomonas aeruginosa--producer of bioPAV

A Pseudomonas aeruginosa strain producing an extracellular surfactant (biosurfactant) was isolated. The growth of this strain, referred to as 50.3, on a mineral glycerol-containing medium produces an emulsifying activity (60%) and decreases the surface tension of the culture liquid by a factor of 2.8 (to 25 mN/m). The optimum conditions for its growth and production of biosurfactants: intense aeration, pH 7.0-8.0, and the presence of Mg2+. The optimum biosurfactant properties were achieved when glucose was used as the only source of carbon and energy and NH4Cl was used as a source of nitrogen. The biosurfactant was isolated from the culture liquid by extraction and precipitation.     

Effect of nutritional and environmental conditions on the production and composition of rhamnolipids by P. aeruginosa UG2

The production of rhamnolipid biosurfactants by P. aeruginosa UG2 was examined under different culture conditions. Rhamnolipid yield was affected by the nature of the carbon sources, the nutrient concentrations, pH, and age of the culture. Hydrophobic substrates like corn oil, lard (rich in unsaturated and saturated fat), and long chain alcohols maximized biosurfactant production (100-165 mg/g substrate). Hydrophilic substrates like glucose, and succinic acid delivered poor yields (12-36 mg/g substrate). Rhamnolipid production was greater when N as (NH4)(2)SO4 and trace metals were added in several periodic doses rather than at the beginning of the process. Increased biosurfactant production was seen in cultures maintained at neutral pH relative to cultures allowed to develop acidic conditions (pH = 6.25). Although the level of rhamnolipid production was affected by culture conditions, the distribution of rhamnolipid subspecies did not vary between cultures. A dirhamnolipid species containing two 10 carbon alpha-hydroxy fatty acids [Rh2C10C10] was the most abundant in the mixtures (60.6 mol%), while the levels of the monorhamnolipid [RhC10C10] (20.7 mol%) and two dirhamnolipids [Rh2C10C12 and its dehydro variant Rh2C10C12-H2] (18.7 mol%) were similar. Biosurfactant mixtures produced with corn oil as sole carbon source solubilized the herbicide trifluralin [2,6-dinitro-N,N-dipropyl-4-(trifluoromethyl)benzamine] to a greater extent. This suggests that the presence of incompletely metabolized hydrophobic by-products acting as co-solvents can increase the solubilization capacity of biosurfactant mixtures.     

Biosurfactant production and growth kinetics of bacteria in a designer marine medium: improved physiochemical properties

A combinatorial screening strategy was adopted for the development of a suitable medium for enhanced biosurfactant production by a marine strain. As a result, a modified marine medium (MMM) was developed, which contained urea and strontium chloride besides other salts important for the growth of marine bacteria. This medium supported growth, evident from a higher maximum growth rate value of 0.42 h(-1) and an enhanced biosurfactant production of 2.58 g/L. The critical micelle concentration (CMC) was determined for the biosurfactants obtained from all tested media combinations. The biosurfactant produced with this medium was stable at high temperature (100 °C), a wide range of pH (5-11) and salt concentration of 5-35%. The emulsifying activity and stability of the biosurfactant obtained using MMM was better than the biosurfactant obtained using conventional media. This biosurfactant with improved physiochemical properties is suitable for a wide range of applications in industry and for marine environmental cleaning.     

Heterologous production of Pseudomonas aeruginosa EMS1 biosurfactant in Pseudomonas putida

A new bacterial strain isolated from activated sludge, identified as Pseudomonas aeruginosa EMS1, produced a biosurfactant when grown on acidified soybean oil as the sole carbon source. An optimum biosurfactant production of 5 g/L was obtained with the following medium composition: 2% acidified soybean oil, 0.3% NH4NO3, 0.03% KH2PO4, 0.03% K2HPO4, 0.02% MgSO4.7H2O and 0.025% CaCl2.2H2O, with shaking at 200 rpm for an incubation period of 100 h at 30 degrees C. The production of the biosurfactant was found to be a function of cell growth, with maximum production occurring during the exponential phase. Hemolysis of erythrocytes and thin-layer chromatography studies revealed that the secreted biosurfactant was rhamnolipid. To overcome the complex environmental regulation with respect to rhamnolipid biosynthesis, and to replace the opportunistic pathogen P. aeruginosa with a safe industrial strain, attempts were made to achieve rhamnolipid production in a heterologous host, Pseudomonas putida, using molecular cloning of rhlAB rhamnosyltransferase genes with the rhlRI quorum sensing system, assuming that a functional rhamnosyltransferase would catalyze the formation of rhamnosyl-6-hydroxydecanoyl-6-hydroxydecanoate (mono-rhamnolipid) in P. putida. It was shown that rhamnolipid can be produced in the heterologous strain, P. putida, when provided with the rhamnosyltransferase genes.     

Biosurfactant production by Pseudomonas aeruginosa A41 using palm oil as carbon source

Biosurfactant production by Pseudomonas aeruginosa A41, a strain isolated from seawater in the gulf of Thailand, was examined when grown in defined medium containing 2% vegetable oil or fatty acid as a carbon source in the presence of vitamins, trace elements and 0.4% NH(4)NO(3), at pH 7 and 30 degrees C with 200 rpm-shaking for 7 days. The yield of biosurfactant steadily increased even after a stationary phase. Under such conditions the surface tension of the medium was lowered from 55-70 mN/m to 27.8-30 mN/m with every carbon source tested. However, types of carbon sources were found to affect biosurfactant yield. The yields of rhamnolipid biosurfactant were 6.58 g/L, 2.91 g/L and 2.93 g/L determined as rhamnose content when olive oil, palm oil and coconut oil, respectively, were used as a carbon source. Among them, biosurfactant obtained from palm oil was the best in lowering surface tension of the medium. Increase in biosurfactant activities in terms of oil displacement test and rhamnose content were observed to be higher with shorter chain fatty acids than that of the longer chains (C12>C14>C16). In addition, we found that C18:2, highly unsaturated fatty acid, showed higher oil displacement activity and rhamnose content than that of C18:1. The optimal oil displacement activity was found at pH 7-9 and in the presence of 0.5-3% NaCl. The oil displacement activity was stable to temperatures up to 100 degrees C for 15 h. Surface tension reduction activity was relatively stable at pH 2-12 and 0-5% of NaCl. Emusification activity tested with various types of hydrocarbons and vegetable oils showed similarity of up to 60% stability. The partially purified biosurfactant via TLC and silica gel column chromatography gave three main peaks on HPLC with mass spectra of 527, 272, and 661 m/z respectively, corresponding to sodium-monorhamnodecanoate, hydroxyhexadecanoic acid and an unknown compound, respectively.     

A Biosurfactant-Producing Pseudomonas aeruginosa Strain

A Pseudomonas aeruginosa strain producing an extracellular surfactant (biosurfactant) was isolated. The growth of this strain, referred to as 50.3, on a mineral glycerol-containing medium produces an emulsifying activity (60%) and decreases the surface tension of the culture liquid by a factor of 2.8 (to 25 mN/m). The optimum conditions for its growth and production of biosurfactants are intense aeration, pH 7.0–8.0, and the presence of Mg²⁺. The optimum biosurfactant properties were achieved when glucose was used as the only source of carbon and energy and NH₄Cl was used as a source of nitrogen. The biosurfactant was isolated from the culture liquid by extraction and precipitation.     

Characterization and antimicrobial properties of lipopeptide biosurfactants produced by Bacillus subtilis SJ301 and Bacillus vallismortis JB201

Biosurfactant producing bacteria, terrestrial Bacillus subtilis SJ301 and marine Bacillus vallismortis JB201 were isolated from sites contaminated with crude oil and its by-products. Cellular growth and biosurfactant production of the isolates were studied with different carbon sources (glucose, fructose, glycerol and petrol). Both bacterial isolates synthesized biosurfactants in the presence of glucose at late log phase and in the presence of petrol at stationary phase at 35°C. Biosurfactants obtained from both bacteria reduced the surface tension of the growth medium below 33 mN/m and exhibited this capacity in cell-free filtrates also. Raising the temperature from 25 to 35°C, accelerated onset of biosurfactant production in both the isolates, however, change in pH values from 6.5 to 7.5 had no effect. Functional and structural characterization of the crude biosurfactants was carried out by FTIR and ¹H and ¹³C NMR spectroscopy and the compounds were identified as surfactin lipopeptides. Biosurfactant produced by the terrestrial B. subtilis SJ301 showed antimicrobial activity against Escherichia coli and Shigella dysenteriae whereas the marine B. vallismortis JB201 revealed antimicrobial activity against Klebsiella pneumoniae, Salmonella typhi and Streptococcus pneumoniae.     

Production of biosurfactant and antifungal compound by fermented food isolate Bacillus subtilis 20B

A biosurfactant producing strain, Bacillus subtilis 20B, was isolated from fermented food in India. The strain also showed inhibition of various fungi in in-vitro experiments on Potato Dextrose Agar medium. It was capable of growth at temperature 55 degrees C and salts up to 7%. It utilized different sugars, alcohols, hydrocarbons and oil as a carbon source, with preference for sugars. In glucose based minimal medium it produced biosurfactant which reduced surface tension to 29.5 mN/m, interfacial tension to 4.5 mN/m and gave stable emulsion with crude oil and n-hexadecane. The biosurfactant activity was stable at high temperature, a wide range of pH and salt concentrations for five days. Oil displacement experiments using biosurfactant containing broth in sand pack columns with crude oil showed 30.22% recovery. The possible application of organism as biocontrol agent and use of biosurfactant in microbial enhanced oil recovery (MEOR) is discussed.     

Isolation and characterization of a halotolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">subtilis</Emphasis> BBK-1 which produces three kinds of lipopeptides: bacillomycin L,plipastatin, and surfactin

Twenty-three halotolerant and biosurfactant producing strains were collected from salty conditions in central Thailand. One of the strains designated BBK-1 produced the biosurfactants with the highest activity. BBK-1 was isolated from fermented foods and was identified as B. subtilis based on its physiological characteristics and 16S rRNA gene sequence. We show that the strain grows in media containing NaCl up to 16% (w/v) and produces biosurfactants in NaCl up to 8%. We found that B. subtilis BBK-1 produces three kinds of surface-active lipopeptides simultaneously. By their respective molecular weights and amino acid compositions, it is indicated that these lipopeptides are bacillomycin L, plipastatin, and surfactin. In order to analyze the production mechanism of lipopeptides further in the strain, a generally important biosynthetic gene encoding 4'-phosphopantetheinyl transferase was cloned and sequenced. The gene existed in a single copy in the genome and the deduced amino acid sequence was almost identical to that of Lpa-14 from B. subtilis strain RB14, which co-produces iturin A and surfactin.     

Screening of biosurfactant-producing Bacillus strains using glycerol from the biodiesel synthesis as main carbon source

Glycerol, a co-product of biodiesel production, was evaluated as carbon source for biosurfactant production. For this reason, seven non-pathogenic biosurfactant-producing Bacillus strains, isolated from the tank of chlorination at the Wastewater Treatment Plant at Federal University of Ceara, were screened. The production of biosurfactant was verified by determining the surface tension value, as well as the emulsifying capacity of the free-cell broth against soy oil, kerosene and N-hexadecane. Best results were achieved when using LAMI005 and LAMI009 strains, whose biosurfactant reduced the surface tension of the broth to 28.8?±?0.0 and 27.1?±?0.1?mN?m(-1), respectively. Additionally, at 72?h of cultivation, 441.06 and 267.56?mg?L(-1) of surfactin were produced by LAMI005 and LAMI009, respectively. The biosurfactants were capable of forming stable emulsions with various hydrocarbons, such as soy oil and kerosene. Analyses carried out with high performance liquid chromatography (HPLC) showed that the biosurfactant produced by Bacillus subtilis LAMI009 and LAMI005 was compatible with the commercially available surfactin standard. The values of minimum surface tension and the CMC of the produced biosurfactant indicated that it is feasible to produce biosurfactants from a residual and renewable and low-cost carbon source, such as glycerol.     

In Situ Biosurfactant Production by Bacillus Strains Injected into a Limestone Petroleum Reservoir

Biosurfactant-mediated oil recovery may be an economic approach for recovery of significant amounts of oil entrapped in reservoirs, but evidence that biosurfactants can be produced in situ at concentrations needed to mobilize oil is lacking. We tested whether two Bacillus strains that produce lipopeptide biosurfactants can metabolize and produce their biosurfactants in an oil reservoir. Five wells that produce from the same Viola limestone formation were used. Two wells received an inoculum (a mixture of Bacillus strain RS-1 and Bacillus subtilis subsp. spizizenii NRRL B-23049) and nutrients (glucose, sodium nitrate, and trace metals), two wells received just nutrients, and one well received only formation water. Results showed in situ metabolism and biosurfactant production. The average concentration of lipopeptide biosurfactant in the produced fluids of the inoculated wells was about 90 mg/liter. This concentration is approximately nine times the minimum concentration required to mobilize entrapped oil from sandstone cores. Carbon dioxide, acetate, lactate, ethanol, and 2,3-butanediol were detected in the produced fluids of the inoculated wells. Only CO₂ and ethanol were detected in the produced fluids of the nutrient-only-treated wells. Microbiological and molecular data showed that the microorganisms injected into the formation were retrieved in the produced fluids of the inoculated wells. We provide essential data for modeling microbial oil recovery processes in situ, including growth rates (0.06 ± 0.01 h⁻¹), carbon balances (107% ± 34%), biosurfactant production rates (0.02 ± 0.001 h⁻¹), and biosurfactant yields (0.015 ± 0.001 mol biosurfactant/mol glucose). The data demonstrate the technical feasibility of microbial processes for oil recovery.     

Effects of carbon and nitrogen sources on rhamnolipid biosurfactant production by <Emphasis Type="Italic">Pseudomonas nitroreducens</Emphasis> isolated from soil

Rhamnolipid biosurfactant production by Pseudomonas nitroreducens isolated from petroleum-contaminated soil was investigated. The effects of carbon, nitrogen and carbon to nitrogen ratio on biosurfactant production were examined using mineral salts medium as the growth medium. The tenso-active properties (surface activity and critical micelle concentrations of the produced biosurfactant were also evaluated. The best carbon source, nitrogen source were glucose and sodium nitrate giving rhamnolipid yields of 5.28 and 4.38 g l⁻¹, respectively. The maximum rhamnolipid production of 5.46 g l⁻¹ was at C/N (glucose/sodium nitrate) of 22. The rhamnolipid biosurfactant reduced the surface tension of water from 72 to ~37 mN/m. It also has critical micelle concentration of ~28 mg l⁻¹. Thus, the results presented in our reports show that the produced rhamnolipid can find wide applications in various bioremediation activities such as enhanced oil recovery and petroleum degradation.     

Production of glycolipids containing biosurfactant by Pseudomonas species

Microorganisms, that degrade hydrocarbon were isolated and screened for their biosurfactant activity. A total of 68 strains were isolated and tested for their glycolipid activity of which 4 isolates showed good glycolipid activity. Isolate K10 gave the maximum biosurfactant production in medium A (containing kerosene as a sole carbon source) as compared to medium B (containing glucose as a sole carbon source). Characterization of isolate K10 showed that it belongs to Pseudomonas species.     

Biosurfactant production by a new Pseudomonas putida strain

Observation of both tensio-active and emulsifying activities indicated that biosurfactants were produced by the newly isolated and promising strain Pseudomonas putida 21BN. The biosurfactants were identified as rhamnolipids, the amphiphilic surface-active glycolipids usually secreted by Pseudomonas spp. Their production was observed when the strain was grown on soluble substrates, such as glucose or on poorly soluble substrates, such as hexadecane, reaching values of 1.2 g l(-1). When grown on hexadecane as the sole carbon source the biosurfactant lowered the surface tension of the medium to 29 mN m(-1) and formed stable and compact emulsions with emulsifying activity of 69%.     

Antimicrobial biosurfactants from marine Bacillus circulans: extracellular synthesis and purification

Aims:  To purify the biosurfactant produced by a marine Bacillus circulans strain and evaluate the improvement in surface and antimicrobial activities.
Methods and Results:  The study of biosurfactant production by B. circulans was carried out in glucose mineral salts (GMS) medium using high performance thin layer chromatography (HPTLC) for quantitative estimation. The biosurfactant production by this strain was found to be growth-associated showing maximum biosurfactant accumulation at 26 h of fermentation. The crude biosurfactants were purified using gel filtration chromatography with Sephadex^® G-50 matrix. The purification attained by employing this technique was evident from UV–visible spectroscopy and TLC analysis of crude and purified biosurfactants. The purified biosurfactants showed an increase in surface activity and a decrease in critical micelle concentration values. The antimicrobial action of the biosurfactants was also enhanced after purification.
Conclusions:  The marine B. circulans used in this study produced biosurfactants in a growth-associated manner. High degree of purification could be obtained by using gel filtration chromatography. The purified biosurfactants showed enhanced surface and antimicrobial activities.
Significance and Impact of the Study:  The antimicrobial biosurfactant produced by B. circulans could be effectively purified using gel filtration and can serve as new potential drugs in antimicrobial chemotherapy.     

Utilization of palm oil decanter cake as a novel substrate for biosurfactant production from a new and promising strain of Ochrobactrum anthropi 2/3

A biosurfactant-producing bacterium, isolate 2/3, was isolated from mangrove sediment in the south of Thailand. It was evaluated as a potential biosurfactant producer. The highest biosurfactant production (4.52 g/l) was obtained when the cells were grown on a minimal salt medium containing 25 % (v/v) palm oil decanter cake and 1 % (w/v) commercial monosodium glutamate as carbon and nitrogen sources, respectively. After microbial cultivation at 30 °C in an optimized medium for 96 h, the biosurfactant produced was found to reduce the surface tension of pure water to 25.0 mN/m with critical micelle concentrations of 8.0 mg/l. The stability of the biosurfactant at different salinities, pH and temperature and also its emulsifying activity was investigated. It is an effective surfactant at very low concentrations over a wide range of temperatures, pH and salt concentrations. The biosurfactant obtained was confirmed as a glycolipid type biosurfactant by using a biochemical test, fourier-transform infrared spectroscopy, MNR and mass spectrometry. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance polyaromatic hydrocarbons solubility.