Orientation of the DNA in the filamentous bacteriophage f1

The filamentous bacteriophage f1 consists of a molecule of circular single-stranded DNA coated along its length by about 2700 molecules of the B protein. Five molecules of the A protein and five molecules of the D protein are located near or at one end of the virion, while ten molecules of the C protein are located near or at the opposite end. The two ends of the phage can be separated by reacting phage fragments, which have been generated by passage of intact phage through a French press, with antibody directed against the A protein (Grant et al., 1981a). By hybridizing the DNA isolated from either end of ³²P-labeled phage to specific restriction fragments of fl replicative form I DNA, we have determined that the single-stranded DNA of the filamentous bacteriophage f1 is oriented within the virion. For wild-type phage, the DNA that codes for the gene III protein is located at the A and D protein end and that which corresponds to the intergenic region is located close to the C protein end of the particle. The intergenic region codes for no protein but contains the origins for both viral and complementary strand DNA synthesis. Analysis of the DNA orientation in phage in which the plasmid pBR322 has been inserted into different positions within the intergenic region of fl shows that the C protein end of all sizes of filamentous phage particles appears to contain a common sequence of phage DNA. This sequence is located near the junction of gene IV and the intergenic region, and probably is important for normal packaging of phage DNA into infectious particles. There appears to be no specific requirement for the origins of viral and complementary strand DNA synthesis to be at the end of a phage particle.     

Formation of Template-Switching Artifacts by Linear Amplification

Linear amplification is a method of synthesizing single-stranded DNA from either a single-stranded DNA or one strand of a double-stranded DNA. In this protocol, molecules of a single primer DNA are extended by multiple rounds of DNA synthesis at high temperature using thermostable DNA polymerases. Although linear amplification generates the intended full-length single-stranded product, it is more efficient over single-stranded templates than double-stranded templates. We analyzed linear amplification over single- or double-stranded mouse H-ras DNA (exon 1–2 region). The single-stranded H-ras template yielded only the intended product. However, when the double-stranded template was used, additional artifact products were observed. Increasing the concentration of the double-stranded template produced relatively higher amounts of these artifact products. One of the artifact DNA bands could be mapped and analyzed by sequencing. It contained three template-switching products. These DNAs were formed by incomplete DNA strand extension over the template strand, followed by switching to the complementary strand at a specific Ade nucleotide within a putative hairpin sequence, from which DNA synthesis continued over the complementary strand.     

A fast and simple method for sequencing DNA cloned in the single-stranded bacteriophage M13.

The chain termination DNA sequencing procedure of Sanger et al. (1977) requires single-stranded DNA as template. M13 phage DNA exists as a single strand and therefore every DNA sequence cloned in M13 can be easily obtained in this form. Here we show that M13 single-stranded DNA pure enough to be used as a template for sequence determination can be prepared by simple centrifugation of the phage particle and extraction with phenol.     

Cloning of a functional replication origin of phage G4 into the genome of phage M13.

A chimeric single-stranded DNA phage, M13Gori1, has been formed as a result of the in vitro insertion of a 2216 base-pair HaeII fragment of bacteriophage G4 replicative form DNA into the replicative form DNA of bacteriophage M13. The inserted G4 DNA carries the dnaG-dependent origin for G4 complementary strand synthesis. The cloned G4 origin functions both in vivo and in vitro in the conversion of M13Gori1 single-stranded viral DNA to the duplex replicative form by a rifampicin-resistant mechanism. Labelling of the 3′ terminus of the single discontinuity in M13Gori1 replicative form II molecules synthesized in crude extracts and subsequent restriction analysis indicate that M13Gori1 complementary strand synthesis can be initiated at either the RNA polymeraseprimed M13 origin or at the dnaG-primed G4 origin. The M13Gori1 complementary strand initiated at the G4 origin terminates in the vicinity of the G4 origin after progressing around the circular template and traversing the M13 origin region, indicating the absence of a specific nucleotide sequence in the M13 origin for termination of the newly formed complementary strand. The ability of this chimeric phage to utilize the cloned G4 origin in vivo even in the presence of the presumed M13 pilot protein (gene 3 protein) indicate that the nucleotide sequence of the replication origin is sufficient for recognizing the appropriate initiation enzymes. Since decapsidation of M13 is tightly coupled to replicative form formation, initiation at the G4 origin, located over 1000 nucleotides from the M13 complementary strand origin, indicates that widely separated nucleotide sequences contained in the filamentous virion can be exposed to the cell cytoplasm during eclipse.     

Nature of the Complementary Strands Synthesized in Vitro upon the Single-Stranded Circular DNA of Bacteriophage øX174 after Ultraviolet Irradiation

This paper describes experiments intended to decide whether UV lesions in DNA act as absolute blocks to chain elongation by the Escherichia coli DNA polymerase or only slow down the polymerization process. Ultraviolet (UV)-irradiated, single-stranded (SS) circular DNA of bacteriophage øX174 was used as template for the polymerase in a reaction mixture in vitro, under conditions allowing synthesis of not more than one complementary strand per template molecule. The mean length of the newly synthesized complementary strands (as determined by velocity sedimentation in alkaline CsCl gradients), as well as the over-all template activity (as measured by deoxyadenosine monophosphate [dAMP] incorporation) was found to decrease with the number of biologically lethal hits sustained by the irradiated templates. With the increase of time or temperature of reaction, the net synthesis of complementary strands increased (as a consequence of increased initiation), but their mean length remained constant. The mean length of synthesized strands was greater than would be expected if all biologically lethal hits were to block the polymerization process. The lethal hits which serve as blocking lesions are inferred to be pyrimidine dimers because it is possible to obtain synthesis of full-length complementary strands if, when heat-denatured, UV-irradiated, double-stranded replicative form (RF II) DNA of bacteriophage øX174 is used as a template, it is pretreated with yeast photoreactivating enzyme (YPRE) in presence of visible light.     

Preparation of single-stranded deoxyribonucleic acid probes using an immobilized template

A new method for the easy preparation of specific single-stranded DNA fragments is presented. Recombinant M13 DNA containing the strand complementary to the sequence of interest is made partially double-stranded by elongating a conventional M13 sequencing primer. Following linearization by enzymatic digestion downstream from the insert (relative to priming site), this DNA is coupled to diazotized paper through its single-stranded (vector) portion. Subsequent denaturation of the double-stranded region generates an immobilized template strand. Successive runs of primed syntheses of the (desired) complementary strand can be realized using the same template. The copies are easily isolated by release upon denaturation. DNA probes prepared by this method have proven to be valuable tools for gene analysis.     

Influence of template primary and secondary structure on the rate and fidelity of DNA synthesis

High resolution gel electrophoresis was used to monitor the successive addition of dNMP residues onto the 3'-OH ends of discrete 5'-32P-primers, during DNA synthesis on natural templates. Resulting autoradiographic banding patterns revealed considerable variation in the relative rates of incorporation at different positions along the template. The pattern of "pause sites" along the template was unique for each of three different DNA polymerases (polymerase I (the "large fragment" form of Escherichia coli), T4 polymerase (encoded by bacteriophage T4), and AMV polymerase (DNA polymerase of avian myeloblastosis virus]. Most pause sites were not caused by attenuation of polymerization at regions of local secondary structure in the template. Assays of the accuracy of incorporation at different positions along the template (in which elongation was monitored in the presence of only 3 of the 4 2'-deoxynucleoside 5'-triphosphates) strongly suggested that the relative fidelity of DNA synthesis catalyzed by different polymerases depends on the position on the template at which the comparison is made. Primer-templates were constructed that permitted comparison of elongation during synthesis on a single-stranded template with that during polymerization through a double-stranded region (wherein elongation required concomitant displacement of a strand annealed adjacent to the 5'-32P-primer). Although strand displacement DNA synthesis catalyzed by polymerase I occurred approximately ten times more slowly than synthesis in the same region of a single-stranded viral template, most of the pause sites were the same in the presence or absence of "tandem" primer. Electrophoretic assays of the fidelity of DNA synthesis suggested that an increased tendency toward misincorporational "hotspots" occurred when elongation required concomitant strand displacement.     

Primer-directed mutagenesis of linearized plasmids

Two novel mutagenesis techniques to specifically alter the sequence of plasmid DNA have been developed. In contrast to other primer-directed mutagenesis methods which require a single-stranded, closed-circular template, a linearized single strand was used as the mutagenesis template. The template is prepared by restriction enzyme digestion of covalently-closed-circular plasmid DNA. These methods are simple, require small amounts of plasmid DNA, and can result in a relatively high frequency of mutagenesis.     

Functional aspects of Escherichia coli rep helicase in unwinding and replication of DNA

The gene for Escherichia coli rep helicase (rep protein) was subcloned in a pBR plasmid and the protein overproduced in cells transformed with the hybrid DNA. The effect of purified enzyme on strand unwinding and DNA replication was investigated by electron microscopy. The templates used were partial duplexes of viral DNA from bacteriophage fd::Tn5 and reannealed DNA from bacteriophage Mu. The experiments with the two DNA species show DNA unwinding uncoupled from replication. The single-stranded phage fd::Tn5 DNA with the inverted repeat of transposon Tn5 could be completely replicated in the presence of the E. coli enzymes rep helicase, DNA binding protein I, RNA polymerase and DNA polymerase III holoenzyme. A block in the unwinding step increases secondary initiation events in single-stranded parts of the template, as DNA polymerase III holoenzyme cannot switch across the stem structure of the transposon.     

Mutagenesis at a specific position in a DNA sequence

Predefined changes in a known DNA sequence were introduced by a general method. Oligodeoxyribonucleotides complementary to positions 582 to 593 of the viral DNA strand of the bacteriophage phiX174 am3 mutant (pGTATCCTACAAA), and to the wild type sequence in this region (pGTATCCTACAAA), were synthesized and used as specific mutagens. Each of these oligonucleotides was incorporated into a complete circular complementary strand when used as primer on a genetically heterologous viral strand template, by the combined action of subtilisin-treated Escherichia coli DNA polymerase I and T4 DNA ligase. Incomplete duplexes were removed or were inactivated by nuclease S1 and the products were used to transfect spheroplasts of E. coli. Both oligonucleotides induced specific mutations at high efficiency when used with heterologous template (15% mutants among progeny phage). The am phages isolated by this procedure are phenotypically gene E mutants, and contain A at position 587 of the viral strand. They thus appear identical with am3 and provide evidence that the change G leads to A at position 587 is sufficient to produce a defective E function. Since the template for the induction of am mutants carried another genetic marker (sB1), the strains carrying the induced mutations have the new genotype am3 sB1. It should be possible to introduce the am3 mutation into any known mutant strain of phi174 using this same oligonucleotide. Both possible transition mutations were induced in these experiments. In principle, the method could also induce transversions, insertions, and deletions. The method should be applicable to other circular DNAs of similar size, for example recombinant DNA plasmids.     

Construction of an M13 histidine-transducing phage: a single-stranded cloning vehicle with one EcoRI site.

In order to create a ready source of single-stranded DNA for DNA sequence determination by the dideoxy chain-termination method, the promoter-proximal part of the histidine operon, the hisOGD region of Salmonella typhimurium, was cloned onto the single-stranded phage M13. Both orientations of the his DNA were cloned to supply DNA template for sequencing of each strand. Insertion was achieved at an HaeIII site in the intergenic region (IR) of M13, and a single EcoRI site was purposely regenerated at one boundary of the his DNA insert. Infected colonies, not plaques, were selected using the hisD gene as a selective marker. The single RI site and the hisD marker for auxotrophic selection represent improvements on the wild type M13 as a single-stranded vector for cloning other DNA.     

Efficient copying of nonhomologous sequences from ectopic sites via P-element-induced gap repair.

P-element-induced gap repair was used to copy nonhomologous DNA into the Drosophila white locus. We found that nearly 8,000 bp of nonhomologous sequence could be copied from an ectopic template at essentially the same rate as a single-base substitution at the same location. An in vitro-constructed deletion was also copied into white at high frequencies. This procedure can be applied to the study of gene expression in Drosophila melanogaster, especially for genes too large to be manipulated in other ways. We also observed several types of more complex events in which the copied template sequences were rearranged such that the breakpoints occurred at direct duplications. Most of these can be explained by a model of double strand break repair in which each terminus of the break invades a template independently and serves as a primer for DNA synthesis from it, yielding two overlapping single-stranded sequences. These single strands then pair, and synthesis is completed by each using the other as a template. This synthesis-dependent strand annealing (SDSA) model as a possible general mechanism in complex organisms is discussed.     

Lagging strand synthesis in coordinated DNA synthesis by bacteriophage t7 replication proteins

The proteins of bacteriophage T7 DNA replication mediate coordinated leading and lagging strand synthesis on a minicircle template. A distinguishing feature of the coordinated synthesis is the presence of a replication loop containing double and single-stranded DNA with a combined average length of 2600 nucleotides. Lagging strands consist of multiple Okazaki fragments, with an average length of 3000 nucleotides, suggesting that the replication loop dictates the frequency of initiation of Okazaki fragments. The size of Okazaki fragments is not affected by varying the components (T7 DNA polymerase, gene 4 helicase-primase, gene 2.5 single-stranded DNA binding protein, and rNTPs) of the reaction over a relatively wide range. Changes in the size of Okazaki fragments occurs only when leading and lagging strand synthesis is no longer coordinated. The synthesis of each Okazaki fragment is initiated by the synthesis of an RNA primer by the gene 4 primase at specific recognition sites. In the absence of a primase recognition site on the minicircle template no lagging strand synthesis occurs. The size of the Okazaki fragments is not affected by the number of recognition sites on the template.     

Optimization of asymmetric polymerase chain reaction for rapid fluorescent DNA sequencing

A high-throughput method for the preparation of single-stranded template DNA, which is suitable for sequence analysis using fluorescent labeling chemistry, is described here. In this procedure, the asymmetric polymerase chain reaction is employed to amplify recombinant plasmid or bacteriophage DNA directly from colonies or plaques. The use of amplification primers located at least 200 base pairs 5' to the site of sequencing primer annealing removes the need for extensive purification of the asymmetric polymerase chain reaction product. Instead, the single-stranded product DNA is purified by a simple isopropanol precipitation step and then directly sequenced using fluorescent dye-labeled oligonucleotides. This method significantly reduces the time and labor required for template preparation and improves fluorescent DNA sequencing strategies by providing a much more uniform yield of single-stranded DNA.     

The role of gene A protein and E. coli rep protein in the replication of phi X 174 replicative form DNA

The gene A protein of bacteriophage phi X 174 initiates replication of super-twisted RFI DNA by cleaving the viral (+) strand at the origin of replication and binding to the 5' end. Upon addition of E. coli rep protein (single-stranded DNA dependent ATPase), E. coli single-stranded DNA binding protein and ATP, complete unwinding of the two strands occurs. Electron microscopic analyses of intermediates in the reaction reveal that the unwinding occurs by movement of the 5' end into the duplex, displacing the viral strand in the form of a single-stranded loop. Since unwinding will not occur in the absence of either gene A protein or rep protein, it is presumed that the rep protein interacts to form a complex with the bound gene A protein. Single-stranded DNA binding protein facilitates the unwinding by binding to the exposed single-stranded DNA. Further addition of the four deoxyribotriphosphates and DNA polymerase III holoenzyme to the reaction results in synthesis of viral (+) single-stranded circles in amounts exceeding that of the input template. A model describing the role of gene A protein and rep protein in duplex DNA replication is presented and other properties of gene A protein discussed.     

Simple and highly efficient site-specific mutagenesis, by ligation of an oligodeoxyribonucleotide into gapped heteroduplex DNA in which the template strand contains deoxyuridine

A simple and highly efficient procedure for oligodeoxynucleotide (oligo)-directed mutagenesis has been developed. In this procedure, a gapped heteroduplex DNA is first constructed and purified. The gapped heteroduplex consists of a circular 'template' strand of DNA, which contains some misincorporated deoxyuridine nucleotides, and a complementary strand which does not contain deoxyuridine, and which lacks a defined segment. Making a specific change in the sequence of the DNA within the gapped region then only requires ligation and transformation. An oligo, exactly the same length as the gap, and with the desired sequence, is synthesized, purified, and ligated directly into the gap in the heteroduplex. When this DNA is used to transform wt (ung+) Escherichia coli, about 80% of the resulting plasmids contain the sequence determined by the synthetic oligo. One gapped heteroduplex preparation can be used for many mutagenesis experiments, so that this procedure is well-suited for producing a series of defined mutations within a defined target region flanked by sites for restriction enzyme cleavage. As the method does not require a polymerase, the effects of primer displacement and polymerase infidelity are avoided.     

Construction and characterization of recombinant plasmid DNAs containing sequences of the origin of bacteriophage phi X174 DNA replication

The synthetic DNA fragment (formula, see text) (corresponding to nucleotides 4299-4314 of the phi X DNA sequence) was cloned into either the AmpR gene or the KmR gene of plasmid pACYC 177. The DNA sequence of the KmR gene around the insertion site was determined by nucleotide sequence analysis of the pACYC 177 FnudII restriction DNA fragment N6 (345 b.p.). Of five selected plasmid DNAs, which contained inserted DNA sequences in the antibiotic resistance genes, the nucleotide sequences at and around these insertions were determined. Two recombinant plasmids (pFH 704 and pFH 614) contain the hexadecamer sequence in tandem (tail-to-tail and tail-to-head). In the recombinant plasmids pFH 812, pFH 903 and pFH 807 the DNA sequence homology with the phi X origin region was 14 (No. 4300-4313), 16 (No. 4299-4314) and 20 nucleotides (No. 4299-4318), respectively. None of the supercoiled recombinant plasmid DNAs is nicked upon incubation with phi X gene A protein. Moreover, the recombinant plasmid RFI DNAs cannot act as substitutes for phi X RFI DNA in the in vitro (+) strand synthesizing system. It has been shown earlier that single-stranded DNA, which contains the decamer sequence CAACTTGATA is efficiently nicked by the phi X gene A protein. The present results indicate that for nicking of double-stranded supercoiled DNA nucleotide sequence homology with the phi X origin region of more than 20 nucleotides is required. These results suggest a model for initiation of phi X RF DNA replication, which involves the presence of the recognition sequence CAACTTGATA of the phi X gene A protein as well as a second specific nucleotide sequence which is required for the binding of the phi X gene A protein. This binding causes local unwinding of the DNA double helix and exposure of the recognition sequence in a single-stranded form, which then can be nicked by phi X gene A protein.     

Properties of bacteriophage T4 proteins deficient in replication repair

An epistasis group of mutations engendering increased sensitivity to diverse DNA-damaging agents was described previously in bacteriophage T4. These mutations are alleles of genes 32 and 41, which, respectively, encode a single-stranded DNA-binding protein (gp32) and the replicative DNA helicase (gp41). The mechanism by which the lethality of DNA damage is mitigated is unknown but seems not to involve the direct reversal of damage, excision repair, conventional recombination repair, or translesion synthesis. Here we explore the hypothesis that the mechanism involves a switch in DNA primer extension from the cognate template to an alternative template, the just-synthesized daughter strand of the other parental strand. The activities of the mutant proteins are reduced about 2-fold (for gp32) or 4-fold (for gp41) in replication complexes catalyzing coordinated synthesis of leading and lagging strands, in binding single-stranded DNA, promoting DNA annealing, and promoting branch migration. In striking contrast, the mutant proteins are strongly impaired in promoting template switching, thus supporting the hypothesis of survival by template switching.