Homology Built Model of Acetylcholinesterase from Drosophila Melanogaster

Abstract

Acetylcholinesterases from Drosophila melanogaster and Torpedo marmorata possess 35% identical residues. We built a homology model of the Drosophila enzyme on the basis of the known three-dimensional structure of Torpedo acetylcholinesterase, which revealed an oval rim of the active site gorge with an additional hollow which could accept small charged ligands more firmly than the corresponding surface in the Torpedo enzyme. This difference at the peripheral site, together with the kinetics of W121A and W359L mutants, suggests coordinate action of important hydrophobic residues that form the active site gorge during the catalytic process. It may also account for the activation-inhibition kinetic pattern which is characteristic for the insect enzyme.     

Structural modeling and electrostatic properties of aspartate transcarbamylase from Saccharomyces cerevisiae

In Saccharomyces cerevisiae the first two reactions of the pyrimidine pathway are catalyzed by a multifunctional protein which possesses carbamylphosphate synthetase and aspartate transcarbamylase activities. Genetic and proteolysis studies suggested that the ATCase activity is carried out by an independently folded domain. In order to provide structural information for ongoing mutagenesis studies, a model of the three-dimensional structure of this domain was generated on the basis of the known X-ray structure of the related catalytic subunit from E. coli ATCase. First, a model of the catalytic monomer was built and refined by energy minimization. In this structure, the conserved residues between the two proteins were found to constitute the hydrophobic core whereas almost all the mutated residues are located at the surface. Then, a trimeric structure was generated in order to build the active site as it lies at the interface between adjacent chains in the E. coli catalytic trimer. After docking a bisubstrate analog into the active site, the whole structure was energy minimized to regularize the interactions at the contact areas between subunits. The resulting model is very similar to that obtained for the E. coli catalytic trimer by X-ray crystallography, with a remarkable conservation of the structure of the active site and its vicinity. Most of the interdomain and intersubunit interactions that are essential for the stability of the E. coli catalytic trimer are maintained in the yeast enzyme even though there is only 42% identity between the two sequences. Free energy calculations indicate that the trimeric assembly is more stable than the monomeric form. Moreover an insertion of four amino acids is localized in a loop which, in E. coli ATCase, is at the surface of the protein. This insertion exposes hydrophobic residues to the solvent. Interestingly, such an insertion is present in all the eukaryotic ATCase genes sequenced so far, suggesting that this region is interacting with another domain of the multifunctional protein. © 1994 Wiley-Liss, Inc.     

Modeling Study on the Cleavage Step of the Self-Splicing Reaction in Group I Introns

Abstract

A three-dimensional model of the Tetrahymena thermophila group I intron is used to further explore the catalytic mechanism of the transphosphorylation reaction of the cleavage step. Based on the coordinates of the catalytic core model proposed by Michel and Westhof (Michel, F., Westhof, E.J. Mol. Biol. 216, 585–610 (1990)), we first converted their ligation step model into a model of the cleavage step by the substitution of several bases and the removal of helix P9. Next an attempt to place a trigonal bipyramidal transition state model in the active site revealed that this modified model for the cleavage step could not accommodate the transition state due to insufficient space. A lowering of PI helix relative to surrounding helices provided the additional space required. Simultaneously, it provided a better starting geometry to model the molecular contacts proposed by Pyle et al. (Pyle, A M., Murphy, F. L., Cech, T. R. Nature 358, 123–128. (1992)), based on mutational studies involving the J8/7 segment Two hydrated Mg²⁺ complexes were placed in the active site of the ribozyme model, using the crystal structure of the functionally similar Klenow fragment (Beese, L.S., Steitz, T.A. EMBO J. 10, 25–33 (1991)) as a guide. Thepresence of two metal ions in the active site of the intron differs from previous models, which incorporate one metal ion in the catalytic site to fulfill the postulated roles of Mg²⁺ in catalysis. The reaction profile is simulated based on a trigonal bipyramidal transition state, and the role of the hydrated Mg²⁺ complexes in catalysis is further explored using molecular orbital calculations.     

Structure of the catalytic domain of the human mitochondrial Lon protease: Proposed relation of oligomer formation and activity

ATP‐dependent proteases are crucial for cellular homeostasis. By degrading short‐lived regulatory proteins, they play an important role in the control of many cellular pathways and, through the degradation of abnormally misfolded proteins, protect the cell from a buildup of aggregates. Disruption or disregulation of mammalian mitochondrial Lon protease leads to severe changes in the cell, linked with carcinogenesis, apoptosis, and necrosis. Here we present the structure of the proteolytic domain of human mitochondrial Lon at 2 Å resolution. The fold resembles those of the three previously determined Lon proteolytic domains from Escherichia coli, Methanococcus jannaschii, and Archaeoglobus fulgidus. There are six protomers in the asymmetric unit, four arranged as two dimers. The intersubunit interactions within the two dimers are similar to those between adjacent subunits of the hexameric ring of E. coli Lon, suggesting that the human Lon proteolytic domain also forms hexamers. The active site contains a 3₁₀ helix attached to the N‐terminal end of α‐helix 2, which leads to the insertion of Asp852 into the active site, as seen in M. jannaschii. Structural considerations make it likely that this conformation is proteolytically inactive. When comparing the intersubunit interactions of human with those of E. coli Lon taken with biochemical data leads us to propose a mechanism relating the formation of Lon oligomers with a conformational shift in the active site region coupled to a movement of a loop in the oligomer interface, converting the proteolytically inactive form seen here to the active one in the E. coli hexamer.     

改造大肠杆菌卟啉代谢途径对重组过氧化物酶活性的影响

【目的】原核表达某些需辅因子的外源蛋白时往往酶活偏低,为提高酶活和减少外加辅因子的成本,我们尝试在大肠杆菌中表达外源过氧化氢-过氧化物酶的同时提高大肠杆菌中与该酶辅因子相关的合成代谢。【方法】本研究克隆了中度嗜盐菌Halomonas elongata DSM2581的过氧化氢-过氧化物酶CAT-POD(catalase-peroxidase)编码基因kat G的ORF,构建原核表达载体p ET28a-kat G,实现了CAT-POD在大肠杆菌中的重组表达。由于CAT-POD活性依赖其活性中心血红素,而血卟啉是血红素的骨架,通过构建原核表达载体p UC19-tac-hem A,将编码5-氨基乙酰丙酸合成酶的hem A基因在大肠杆菌中过量表达,提高卟啉的含量,从而提高重组蛋白CAT-POD的酶活。【结果】最终的CAT酶活达到了377 U/m L,为对照组的7.5倍。【结论】本研究为工业生产高活性CAT-POD提供了有效的方案,也为体外重组表达含辅因子的蛋白提供可借鉴的思路。     

Insights into catalytic activity of industrial enzyme Co-nitrile hydratase. Docking studies of nitriles and amides

Nitrile hydratase (NHase) is an enzyme containing non-corrin Co³⁺ in the non-standard active site. NHases from Pseudonocardia thermophila JCM 3095 catalyse hydration of nitriles to corresponding amides. The efficiency of the enzyme is 100 times higher for aliphatic nitriles then aromatic ones. In order to understand better this selectivity dockings of a series of aliphatic and aromatic nitriles and related amides into a model protein based on an X-ray structure were performed. Substantial differences in binding modes were observed, showing better conformational freedom of aliphatic compounds. Distinct interactions with postranslationally modified cysteines present in the active site of the enzyme were observed. Modeling shows that water molecule activated by a metal ion may easily directly attack the docked acrylonitrile to transform this molecule into acryloamide. Thus docking studies provide support for one of the reaction mechanisms discussed in the literature. Figure Crystalographic structure of Pseudonocardia thermophila JCM 3095 nitrile hydratase (a) and the non-standard active site (b)     

Modeling the E. coli 4-hydroxybenzoic acid oligoprenyltransferase (ubiA transferase) and characterization of potential active sites

4-Hydroxybenzoate oligoprenyltransferase of E. coli, encoded in the gene ubiA, is an important key enzyme in the biosynthetic pathway to ubiquinone. It catalyzes the prenylation of 4-hydroxybenzoic acid in position 3 using an oligoprenyl diphosphate as a second substrate. Up to now, no X-ray structure of this oligoprenyltransferase or any structurally related enzyme is known. Knowledge of the tertiary structure and possible active sites is, however, essential for understanding the catalysis mechanism and the substrate specificity.With homology modeling techniques, secondary structure prediction tools, molecular dynamics simulations, and energy optimizations, a model with two putative active sites could be created and refined. One active site selected to be the most likely one for the docking of oligoprenyl diphosphate and 4-hydroxybenzoic acid is located near the N-terminus of the enzyme. It is widely accepted that residues forming an active site are usually evolutionary conserved within a family of enzymes. Multiple alignments of a multitude of related proteins clearly showed 100% conservation of the amino acid residues that form the first putative active site and therefore strongly support this hypothesis. However, an additional highly conserved region in the amino acid sequence of the ubiA enzyme could be detected, which also can be considered a putative (or rudimentary) active site. This site is characterized by a high sequence similarity to the aforementioned site and may give some hints regarding the evolutionary origin of the ubiA enzyme.Semiempirical quantum mechanical PM3 calculations have been performed to investigate the thermodynamics and kinetics of the catalysis mechanism. These results suggest a near S_N1 mechanism for the cleavage of the diphosphate ion from the isoprenyl unit. The 4-hydroxybenzoic acid interestingly appears not to be activated as benzoate anion but rather as phenolate anion to allow attack of the isoprenyl cation to the phenolate, which appeared to be the rate limiting step of the whole process according to our quantum chemical calculations. Our models are a basis for developing inhibitors of this enzyme, which is crucial for bacterial aerobic metabolism. Figure Structure of the model of ubiA oligoprenyltransferase derived from the photosynthetic reaction center (1PRC). Putative active amino acid residues and substrates are shown as capped sticks to describe their location and geometry in the putative active sites. The violet spheres identify Mg²⁺.This revised version was published online in April 2005 with corrections to Table 3 and the page make-up.     

Conformationally restricted analogs of the direct thrombin inhibitor FM 19

The serine protease thrombin plays several key roles in the clotting cascade within the hemostatic system, such as in fibrin formation and platelet activation. Thus, development of an inhibitor that binds to the enzyme’s active site (a direct thrombin inhibitor) offers an approach for the treatment of thrombus-associated diseases. Previous structure–activity relationship studies originally based on the bradykinin breakdown product Arg-Pro-Pro-Gly-Phe (RPPGF) led to the development of lead compound FM 19 (d-Arg-Oic-Pro-d-Ala-Phe(p-Me)-NH₂). The recently determined X-ray structure of FM 19 in the active site of thrombin has revealed sites of modification to potentially improve inhibition. In this study, we report the synthesis and biological characterization of nine peptides that replace only the d-Arg residue of the FM 19 sequence, investigating ways to add conformational restriction, modification of the basic moiety at the end of the side chain, and removal of the charge from the N-terminus. Two of these peptides, 6 and 7 (IC₅₀ values of 0.51 and 0.45 μM, respectively), show similar potency to the best compounds in the FM 19 series reported thus far.     

Vaccine target and carrier molecule nontypeable Haemophilus influenzae protein D dimerizes like the close Escherichia coli GlpQ homolog but unlike other known homolog dimers

We have determined the 1.8 Å X-ray crystal structure of nonlipidated (i.e., N-terminally truncated) nontypeable Haemophilus influenzae (NTHi; H. influenzae) protein D. Protein D exists on outer membranes of H. influenzae strains and acts as a virulence factor that helps invade human cells. Protein D is a proven successful antigen in animal models to treat obstructive pulmonary disease (COPD) and otitis media (OM), and when conjugated to polysaccharides also has been used as a carrier molecule for human vaccines, for example in GlaxoSmithKline Synflorix™. NTHi protein D shares high sequence and structural identify to the Escherichia coli (E. coli) glpQ gene product (GlpQ). E. coli GlpQ is a glycerophosphodiester phosphodiesterase (GDPD) with a known dimeric structure in the Protein Structural Database, albeit without an associated publication. We show here that both structures exhibit similar homodimer organization despite slightly different crystal lattices. Additionally, we have observed both the presence of weak dimerization and the lack of dimerization in solution during size exclusion chromatography (SEC) experiments yet have distinctly observed dimerization in native mass spectrometry analyses. Comparison of NTHi protein D and E. coli GlpQ with other homologous homodimers and monomers shows that the E. coli and NTHi homodimer interfaces are distinct. Despite this distinction, NTHi protein D and E. coli GlpQ possess a triose-phosphate isomerase (TIM) barrel domain seen in many of the other homologs. The active site of NTHi protein D is located near the center of this TIM barrel. A putative glycerol moiety was modeled in two different conformations (occupancies) in the active site of our NTHi protein D structure and we compared this to ligands modeled in homologous structures. Our structural analysis should aid in future efforts to determine structures of protein D bound to substrates, analog intermediates, and products, to fully appreciate this reaction scheme and aiding in future inhibitor design.     

嗜热丁烷氧化古菌Candidatus Syntrophoarchaeum烷基转移酶MtaA催化丁基辅酶M的分子机制研究

【背景】嗜热古菌Candidatus Syntrophoarchaeum可以与硫酸盐还原细菌共生,通过逆转产甲烷途径进行正丁烷的氧化,但在该过程中负责催化丁基辅酶M氧化的酶尚未确定。【目的】利用分子动力学模拟证明Ca.Syntrophoarchaeum中mta A基因编码的蛋白可以特异性催化丁基辅酶M中丁基的转移,并非转移甲基。【方法】使用Methanosarcina mazei辅酶M甲基转移酶Mta A的晶体结构(PDB ID:4ay8)作为模板,对Mta A_1 (Gen Bank登录号OFV65993.1)和Mta A_2 (Gen Bank登录号OFV65678.1)进行同源建模。使用分子对接得到两者分别结合CH_3-Co M和C_4H_9-Co M时的结构,并用AMBER18进行分子动力学模拟。【结果】当Mta A_1和Mta A_2分别结合C_4H_9-Co M时,表现出与4ay8晶体结构类似的TIM-Barrel折叠三维结构,但在活性中心形状、Zn~(2+)与底物距离以及活性位点附近氨基酸配位方式等方面存在差异,这可能是导致Ca.Syntrophoarchaeum中mta A基因编码的蛋白催化丁基辅酶M氧化的原因。其中Mta A_2与4ay8结构更相似,活性中心氨基酸配位更完整,暗示其更可能具备催化活性。然而当Mta A_1和Mta A_2分别结合CH_3-Co M时,整体结构不合实际,活性中心Zn~(2+)与底物距离过远,表明底物几乎不可能与酶结合。【结论】Ca.Syntrophoarchaeum中的Mta A_1和Mta A_2很可能是特异性的丁基转移酶,而非催化甲基的转移,其中Mta A_2具备活性的可能性更高。     

Structure and dynamics analysis of a new member heparinase II/III of family 12 polysaccharide lyase from Pseudopedobacter saltans by computational modeling and small-angle X-ray scattering

Abstract

The structure of heparinase II/III belonging to family 12 polysaccharide lyase (PsPL12a) from Pseudopedobacter saltans was generated by homology modeling. Multiple sequence alignment showed conserved (Asn216, Tyr270 and His400) and semi-conserved active site amino acid residues. The modeled structure of PsPL12a displayed α/α toroid domain at N-terminal and antiparallel β sheets at C-terminal domain. The modeled structure was similar to those of heparinases from polysaccharide lyase 12 and 21 families. Validation of PsPL12a model by Ramachandran plot showed 94.6% of residues in the favored region, 5.2% of residues in the allowed region and only 0.2% of residues in the outlier region. The area and volume computed for PsPL12a displayed nearly a closed conformation of the active site, similar to HepIII from Bacteroides thetaiotaomicron. The charge calculation on the surface of the PsPL12a structure showed the higher distribution of positive charge in the active site cleft as compared with other homologous structures. Molecular docking study of MD-simulated PsPL12a structure with heparin oligosaccharide showed high binding affinity as compared with heparan sulfate oligosaccharides. Comparison of the active site of modeled PsPL12a with other homologous heparinases revealed putative catalytic triad involving the residues Asn216, His400 and Tyr270. Small-angle X-ray scattering analysis of PsPL12a displayed a fully folded and boxing glove-like envelop.

Communicated by Ramaswamy H. Sarma     

Flexible Loop in the Structure of S-Adenosylmethionine Synthetase Crystallized in the Tetragonal Modification

Abstract

S-Adenosylmethionine synthetase (MAT, ATP:L-methionine S-adenosyltransferase, E.C.2.5.1.6.) plays a central metabolic role in all organisms. MAT catalyzes the two-step reaction which synthesizes S-adenosylmethionine (AdoMet), pyrophosphate (PP_i) and orthophosphate (Pⁱ) from ATP and L-methionine. AdoMet is the primary methyl group donor in biological systems. MAT from Escherichia coli was crystallized in the tetragonal modification with space group P4₃2₁2 using the same conditions as previously yielded crystals of the hexagonal system [Takusagawa, et al., (1996), J. Biol. Chem., 171, 136–147], except for the crystallization temperature. The structure has been determined by molecular replacement at 3.2 Å resolution. The overall structure of the tetrameric MAT in the tetragonal modification is essentially the same as the structure found in the hexagonal modification. However there are two remarkable differences between the structures of two modifications. One is the contents in the active sites (holo-form vs. apo-form), and the other is the conformation of the flexible loop over the active site (open vs. closed). These differences in the crystal structures are caused solely by the difference in crystallization temperatures (26° C vs. 4° C). We have interpreted the structural data obtained from the X-ray analyses in conjunction with the results of the mechanistic and sequencing studies in terms of possible dynamic motion of the flexible loop. When a substrate/product binds in the active site (hexagonal modification), the loop becomes disordered, apparently due to flexibility at the entrance of the active site as if it acts as a “mobile loop” during the catalytic reaction. On the other hand, when the temperature is decreased, the dynamic motion of the flexible loop may be reduced, and the loop residues enter the active site and close its entrance (tetragonal modification). Thus, the active site of the tetragonal modification is empty despite the crystals being grown in mother liquor containing a large concentration of phosphate (100 mM). There is no significant displacement of amino acid residues in the active site between the holo and apo forms, suggesting that the flexible loop plays an important role in determination of the contents in the active site. Since the functionally important amino acid residues in the active site are all conserved throughout various species, the structures of the active sites and the mechanism of the catalysis are probably essentially identical in the enzymes from a wide range of organisms. However, the substrate K _m and V_max values of MATs from various species are distributed over a wide range. The amino acid residues in the flexible loop regions are poorly conserved throughout various species. Therefore, the wide differences in catalysis rates of MATs from various species may be due to the differences in the composition of the flexible loop.     

Inhibitory effect of α-ketoglutaric acid on α-glucosidase: integrating molecular dynamics simulation and inhibition kinetics

Abstract

The inhibition of α-glucosidase is used as a key clinical approach to treat type 2 diabetes mellitus and thus, we assessed the inhibitory effect of α-ketoglutaric acid (AKG) on α-glucosidase with both an enzyme kinetic assay and computational simulations. AKG bound to the active site and interacted with several key residues, including ASP68, PHE157, PHE177, PHE311, ARG312, TYR313, ASN412, ILE434 and ARG439, as detected by protein–ligand docking and molecular dynamics simulations. Subsequently, we confirmed the action of AKG on α-glucosidase as mixed-type inhibition with reversible and rapid binding. The relevant kinetic parameter IC₅₀ was measured (IC₅₀ = 1.738?±?0.041?mM), and the dissociation constant was determined (K_{i Slope} = 0.46?±?0.04?mM). Regarding the relationship between structure and activity, a high AKG concentration induced the slight modulation of the shape of the active site, as monitored by hydrophobic exposure. This tertiary conformational change was linked to AKG inhibition and mostly involved regional changes in the active site. Our study provides insight into the functional role of AKG due to its structural property of a hydroxyphenyl ring that interacts with the active site. We suggest that similar hydroxyphenyl ring-containing compounds targeting key residues in the active site might be potential α-glucosidase inhibitors. Abbreviations AKG alpha-ketoglutaric acid

pNPG 4-nitrophenyl-α-d-glucopyranoside

ANS 1-anilinonaphthalene-8-sulfonate

MD molecular dynamics.

Communicated by Ramaswamy H. Sarma     

Direct formation of the sesquiterpeonid ether liguloxide by a terpene synthase in Senecio scandens

Key message

SsLOS directly catalyzed formation of the sesquiterpenoid ether liguloxide in the medicinal plant Senecio scandens.

Abstract

Terpene synthases determine the diversity of terpene skeletons and corresponding terpenoid natural products. Oxygenated groups introduced in catalysis of terpene synthases are important for solubility, potential bioactivity and further elaboration of terpenoids. Here we identified one terpene synthase, SsLOS, in the Chinese medicinal plant Senecio scandens. SsLOS acted as the sesquiterpene synthase and utilized (E,E)-farnesyl diphosphate as the substrate to produce a blend of sesquiterpenoids. GC–MS analysis and NMR structure identification demonstrated that SsLOS directly produced the sesquiterpenoid ether, liguloxide, as well as its alcoholic isomer, 6-epi-guaia-2(3)-en-11-ol. Homology modeling and site-directed mutagenesis were combined to explore the catalytic mechanism of SsLOS. A few key residues were identified in the active site and hedycaryol was identified as the neutral intermediate of SsLOS catalysis. The plausible catalytic mechanism was proposed as well. Altogether, SsLOS was identified and characterized as the sesquiterpenoid ether synthase, which is the second terpenoid ether synthase after 1,8-cineol synthase, suggesting some insights for the universal mechanism of terpene synthases using the water molecule in the catalytic cavity.

     

Can the site conditions required for successful natural regeneration of juniper (Juniperus communis L.) be determined from a single species survey?

Background: Ecological surveys often aim to inform biodiversity conservation policy and practice. Survey types differ; all require clear aims and good design. A survey in Scotland was carried out to measure the distribution and health of juniper (Juniperus communis) and potential for its natural regeneration.

Aims: Explore if one-off national surveys can inform conservation action by examining, as an example, the Scottish juniper data set to: (1) determine site conditions favourable for juniper regeneration, (2) provide recommendations for site management for regeneration.

Methods: Associations between site conditions and juniper occurrence were investigated with principal component analysis (PCA) and using species distribution modelling (SDM). To identify changes in site conditions over time, we compared degree of site suitability for natural regeneration (PCA distance) and population age structure.

Results: Twenty-one per cent of the sites showed juniper regeneration. Compared to all juniper sites, conditions at regenerating sites were different (e.g. climatically wetter, lower site fertility). Change over time in conditions was suggested by patterns in population age structure.

Conclusions: Following the establishment of a juniper population, site conditions may change, becoming unsuitable for natural regeneration. Historical site information to confirm this is lacking. We cannot answer fundamental questions about the causal mechanisms of the natural regeneration of juniper and question whether one-off survey data can inform conservation management.     

Mechanistic Studies of dUTPases

The essential enzyme dUTPase is responsible for preventive DNA repair via exclusion of uracil. Lack or inhibition of the enzyme induces thymine‐less cell death in cells performing active DNA synthesis, serving therefore as an important chemotherapeutic target. In the present work, employing differential circular dichroism spectroscopy, we show that D. mel. dUTPase, a recently described eukaryotic model, has a similar affinity of binding towards α,β‐imino‐dUTP as compared to the prokaryotic E. coli enzyme. However, in contrast to the prokaryotic dUTPase, the nucleotide exerts significant protection against tryptic digestion at a specific tryptic site 20 Å far from the active site in the fly enzyme. This result indicates that binding of the nucleotide in the active site induces an allosteric conformational change within the central threefold channel of the homotrimer exclusively in the eukaryotic enzyme. Nucleotide binding induced allosterism in the D. mel. dUTPase, but not in the E. coli enzyme, might be associated with the altered hydropathy of subunit interfaces in these two proteins.     

Computer Graphics Modelling and Molecular Dynamics Simulation of the Core of the Self Splicing Intervening Sequence of the T4 NrdB mRNA in the Presence of the Guanosine Cofactor

Abstract

The active site of the self splicing intron in the T4 nrdB RNA has been modelled on a graphics workstation on the basis of the suggested 3D arrangement of the Tetrahymena IVS¹. This structure was then subjected to energy minimization and molecular dynamics simulation to relax tensions. The cofactor guanosine was docked to a proposed² binding site where it was found to fit well.     

Caseoperoxidase,mixed β-casein–SDS–hemin–imidazole complex: a nano artificial enzyme

A novel peroxidase-like artificial enzyme, named “caseoperoxidase”, was biomimetically designed using a nano artificial amino acid apo-protein hydrophobic pocket. This four-component nano artificial enzyme containing heme–imidazole–β-casein–SDS exhibited high activity growth and k_cat performance toward the native horseradish peroxidase demonstrated by the steady state kinetics using UV–vis spectrophotometry. The hydrophobicity and secondary structure of the caseoperoxidase were studied by ANS fluorescence and circular dichroism spectroscopy. Camel β-casein (Cβ-casein) was selected as an appropriate apo-protein for the heme active site because of its innate flexibility and exalted hydrophobicity. This selection was confirmed by homology modeling method. Heme docking into the newly obtained Cβ-casein structure indicated one heme was mainly incorporated with Cβ-casein. The presence of a main electrostatic site for the active site in the Cβ-casein was also confirmed by experimental methods through Wyman binding potential and isothermal titration calorimetry. The existence of Cβ-casein protein in this biocatalyst lowered the suicide inactivation and provided a suitable protective role for the heme active-site. Additional experiments confirmed the retention of caseoperoxidase structure and function as an artificial enzyme.     

Recombinant production of active Streptococcus pneumoniae CysE in E. coli facilitated by codon optimized BL21(DE3)-RIL and detergent

Abstract

The emergence of drug resistance in Streptococcus pneumoniae (Spn) is a global health threat and necessitates discovery of novel therapeutics. The serine acetyltransferase (also known as CysE) is an enzyme of cysteine biosynthesis pathway and is reported to be essential for the survival of several pathogenic bacteria. Therefore, it appears to be a very attractive target for structure–function understanding and inhibitor design. This study describes the molecular cloning of cysE from Spn in the pET21c vector and efforts carried out for expression and purification of active recombinant CysE. Significant expression of recombinant Spn cysE could be achieved in codon optimized BL21(DE3)-RIL strain as opposed to conventional BL21(DE3) strain. Analysis of codon adaptation index (CAI) with levels of eukaryotic genes and prokaryotic cysEs expressed in heterologous E. coli host suggests that codon optimized E. coli BL21(DE3)-RIL may be a better host for expressing genes with low CAI. Here, an efficient protocol has been developed for recovery of recombinant Spn CysE in soluble and biologically active form by the usage of nonionic detergent Triton X-100 at a concentration as low as 1%. Altogether, this study reports a simple strategy for producing functionally active Spn CysE in E. coli.     

Isoxazol-5(2H)-one: a new scaffold for potent human neutrophil elastase (HNE) inhibitors

Human neutrophil elastase (HNE) is an important target for the development of novel and selective inhibitors to treat inflammatory diseases, especially pulmonary pathologies. Here, we report the synthesis, structure–activity relationship analysis, and biological evaluation of a new series of HNE inhibitors with an isoxazol-5(2H)-one scaffold. The most potent compound (2o) had a good balance between HNE inhibitory activity (IC₅₀ value =20?nM) and chemical stability in aqueous buffer (t_1/2=8.9?h). Analysis of reaction kinetics revealed that the most potent isoxazolone derivatives were reversible competitive inhibitors of HNE. Furthermore, since compounds 2o and 2s contain two carbonyl groups (2-N-CO and 5-CO) as possible points of attack for Ser195, the amino acid of the active site responsible for the nucleophilic attack, docking studies allowed us to clarify the different roles played by these groups.