Studies on the attachment of DNA to silica-coated nanoparticles through a Diels-Alder reaction

A new method has been investigated for the functionalization of gold nanoparticles with DNA. Silica-coated nanoparticles functionalized with a maleimide have been prepared. These particles are designed to react with modified DNA containing a diene functionality at one end of the molecule. The result would be the formation of a more stable attachment of the DNA to the particle through a Diels-Alder reaction. This covalent attachment would not be susceptible to ligand exchanges, which are known to occur in the conventional DNA functionalization of gold nanoparticles.     

DNA gold nanoparticle conjugates incorporating thiooxonucleosides: 7-deaza-6-thio-2'-deoxyguanosine as gold surface anchor

A new protocol for the covalent attachment of oligonucleotides to gold nanoparticles was developed. Base-modified nucleosides with thiooxo groups were acting as molecular surface anchor. Compared to already existing conjugation protocols, the new linker strategy simplifies the synthesis of DNA gold nanoparticle conjugates. The phosphoramidite of 7-deaza-6-thio-2'-deoxyguanosine (6) was used in solid-phase synthesis. Incorporation of the sulfur-containing nucleosides can be performed at any position of an oligonucleotide; even multiple incorporations are feasible, which will increase the binding stability of the corresponding oligonucleotides to the gold nanoparticles. Oligonucleotide strands immobilized at the end of a chain were easily accessible during hybridization leading to DNA gold nanoparticle network formation. On the contrary, oligonucleotides immobilized via a central position could not form a DNA-AuNP network. Melting studies of the DNA gold nanoparticle assemblies revealed sharp melting profiles with a very narrow melting transition.     

DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

A novel DNAzyme-functionalized Pt nanoparticles/carbon nanotubes (DNAzyme/Pt NPs/CNTs) bioconjugate was fabricated as trace tag for ultrasensitive sandwich DNA detection. The Pt NPs/CNTs were prepared via layer-by-layer (LBL) assembly of the Pt NPs and polyelectrolyte on the carboxylated CNTs, followed by the functionalization with the DNAzyme and reporter probe DNA through the platinum-sulfur bonding. The subsequent sandwich-type DNA specific reaction would confine numerous DNAzyme/Pt NPs/CNTs bioconjugate onto the gold electrode surface for amplifying the signal. In the presence of 3,3',5,5' tetramethylbenzidine (TMB) which could be oxidized by the DNAzyme, electrochemical signals could be generated by chronoamperometry via the interrogation of reduction electrochemical signal of oxidized TMB. The constructed DNA sensor exhibited a wide linear response to target DNA ranging from 1.0fM to 10pM with the detection limit down to 0.6fM and exhibited excellent selectivity against even a single base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.     

Preparation of aptamer-linked gold nanoparticle purple aggregates for colorimetric sensing of analytes

Aptamers are single-stranded DNA or RNA molecules that can bind target molecules with high affinity and specificity. The conformation of an aptamer usually changes upon binding to its target analyte, and this property has been used in a wide variety of sensing applications, including detection based on fluorescence intensity, polarization, energy transfer, electrochemistry or color change. Colorimetric sensors are particularly important because they minimize or eliminate the necessity of using expensive and complicated instruments. Among the many colorimetric sensing strategies, metallic nanoparticle-based detection is desirable because of the high extinction coefficients and strong distance-dependent optical properties of the nanoparticles. Here, we describe a protocol for the preparation of aptamer-linked gold nanoparticle purple aggregates that undergo fast disassembly into red dispersed nanoparticles upon binding of target analytes. This method has proved to be generally applicable for colorimetric sensing of a broad range of analytes. The time range for the entire protocol is approximately 5 d, including synthesis and functionalization of nanoparticles, preparation of nanoparticle aggregates and sensing.     

Functionalization of gold and glass surfaces with magnetic nanoparticles using biomolecular interactions

Advances in nanotechnology have enabled the production and characterization of magnetic particles with nanometer-sized features that can be functionalized with biological recognition elements for numerous applications in biotechnology. In the present study, the synthesis of and interactions between self-assembled monolayers (SAMs) on gold and glass surfaces and functionalized magnetic nanoparticles have been characterized. Immobilization of 10-15 nm streptavidin-functionalized nanoparticles to biotinylated gold and glass surfaces was achieved by the strong interactions between biotin and streptavidin. Fluorescent streptavidin-functionalized nanoparticles, biotinylated surfaces, and combinations of the two were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and electron and fluorescent microscopy to confirm that little or no functionalization occurred in nonbiotinylated regions of the gold and glass surfaces compared to the biotinylated sites. Together these techniques have potential use in studying the modification and behavior of functionalized nanoparticles on surfaces in biosensing and other applications.     

Detection of single-nucleotide polymorphisms using gold nanoparticles and single-strand-specific nucleases

The current study reports an assay approach that can detect single-nucleotide polymorphisms (SNPs) and identify the position of the point mutation through a single-strand-specific nuclease reaction and a gold nanoparticle assembly. The assay can be implemented via three steps: a single-strand-specific nuclease reaction that allows the enzyme to truncate the mutant DNA; a purification step that uses capture probe-gold nanoparticles and centrifugation; and a hybridization reaction that induces detector probe-gold nanoparticles, capture probe-gold nanoparticles, and the target DNA to form large DNA-linked three-dimensional aggregates of gold nanoparticles. At high temperature (63 degrees C in the current case), the purple color of the perfect match solution would not change to red, whereas a mismatched solution becomes red as the assembled gold nanoparticles separate. Using melting analysis, the position of the point mutation could be identified. This assay provides a convenient colorimetric detection that enables point mutation identification without the need for expensive mass spectrometry. To our knowledge, this is the first report concerning SNP detection based on a single-strand-specific nuclease reaction and a gold nanoparticle assembly.     

Nanosecond Laser-Assisted Fabrication of Colloidal Gold and Silver Nanoparticles and Their Conjugation with S-Ovalbumin

Plasmonics - In the present work, we have investigated the functionalization of protein S-ovalbumin with laser-generated gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) using...     

High sensitivity DNA detection using gold nanoparticle functionalised polyaniline nanofibres

Polyaniline (PANI) nanofibres (PANI-NF) have been modified with chemically grown gold nanoparticles to give a nanocomposite material (PANI-NF-AuNP) and deposited on gold electrodes. Single stranded capture DNA was then bound to the gold nanoparticles and the underlying gold electrode and allowed to hybridise with a complementary target strand that is uniquely associated with the pathogen, Staphylococcus aureus (S. aureus), that causes mastitis. Significantly, cyclic voltammetry demonstrates that deposition of the gold nanoparticles increases the area available for DNA immobilisation by a factor of approximately 4. EPR reveals that the addition of the Au nanoparticles efficiently decreases the interactions between adjacent PANI chains and/or motional broadening. Finally, a second horseradish peroxidase (HRP) labelled DNA strand hybridises with the target allowing the concentration of the target DNA to be detected by monitoring the reduction of a hydroquinone mediator in solution. The sensors have a wide dynamic range, excellent ability to discriminate DNA mismatches and a high sensitivity. Semi-log plots of the pathogen DNA concentration vs. faradaic current were linear from 150×10(-12) to 1×10(-6) mol L(-1) and pM concentrations could be detected without the need for molecular, e.g., PCR or NASBA, amplification.     

Tetrahedron DNA dendrimers and their encapsulation of gold nanoparticles

DNA dendrimers have achieved increasing attention recently. Previously reported DNA dendrimers used Y-DNA as monomers. Tetrahedron DNA is a rigid tetrahedral cage made of DNA. Herein, we use tetrahedron DNA as monomers to prepare tetrahedron DNA dendrimers. The prepared tetrahedron DNA dendrimers have larger size compared with those made of Y-DNA. In addition, thanks to the central cavity of tetrahedron DNA monomers, some nanoscale structures (e.g., gold nanoparticles) can be encapsulated within tetrahedron DNA monomers. Tetrahedron DNA encapsulated with gold nanoparticles can be further assembled into dendrimers, guiding gold nanoparticles into clusters.     

Linear clusters of gold nanoparticles in quasinematic layers of DNA liquid-crystalline dispersion particles

The effects of small size (～2 nm) gold nanoparticles on the properties of particles of cholesteric liquid-crystalline dispersions formed by double-stranded DNA molecules were analyzed. It has been shown that gold nanoparticles induce two different processes. First, they facilitate reorganization of the spatial cholesteric structure of dispersion particles to nematic one. This process is accompanied by the fast decrease in the amplitude of abnormal band in the CD spectrum. Second, they can form ensembles consisting of gold nanoparticles. This process is accompanied by the development and displacement of surface plasmon resonance band in the visible region of the absorption spectrum. The appearance of this band is analyzed by considering two different models of the formation of ensembles consisting of gold nanoparticles. By small-angle X-ray scattering we performed structural analysis of phases formed by DNA cholesteric liquid-crystalline dispersion particles treated with gold nanoparticles. As a result of this study it was possible to prove the formation of linear clusters of gold nanoparticles in the “free space” between the adjacent DNA molecules fixed in the quasinematic layers of liquid-crystalline particles. It has been hypothesized that the formation of linear clusters of gold nanoparticles is most likely related to DNA molecules, ordered in the spatial structure of quasinematic layers, and the toxicity of these nanoparticles in biological systems hypothesized.     

Biomedical applications of multifunctional gold-based nanocomposites

Active application of gold nanoparticles for various diagnostic and therapeutic purposes started in recent decades due to the emergence of new data on their unique optical and physicochemical properties. In addition to colloidal gold conjugates, growth in the number of publications devoted to the synthesis and application of multifunctional nanocomposites has occurred in recent years. This review considers the application in biomedicine of multifunctional nanoparticles that can be produced in three different ways. The first method involves design of composite nanostructures with various components intended for either diagnostic or therapeutic functions. The second approach uses new bioconjugation techniques that allow functionalization of gold nanoparticles with various molecules, thus combining diagnostic and therapeutic functions in one medical procedure. Finally, the third method for production of multifunctional nanoparticles combines the first two approaches, in which a composite nanoparticle is additionally functionalized by molecules having different properties.     

Association temperature governs structure and apparent thermodynamics of DNA-gold nanoparticles

Apparent thermodynamics of association of DNA-modified gold nanoparticles has been characterized by UV spectroscopy and dynamic light scattering (DLS). Extinction coefficients of unlabelled and DNA-labelled gold nanoparticles have been determined to permit quantitative analysis of the absorption measurements. In contrast to previous studies the associating gold nanoparticles were furnished with complementary oligonucleotide DNA single strands. This resulted in direct complex formation between the nanoparticles on mixing without the requirement of a DNA linker sequence for initiation of cluster formation. Melting curves of the nanoparticle assemblies formed at different temperatures were subjected to two-state analysis. A comparison of the apparent thermodynamic parameters obtained for the dissociation of these aggregates suggests that both thermodynamically and structurally different nanoparticle clusters are obtained depending on the temperature at which assembly proceeds. The van't Hoff enthalpies permit an estimate of the DNA duplexes: gold nanoparticle ratio involved in network formation.     

A colorimetric method for point mutation detection using high-fidelity DNA ligase

The present study reported proof-of-principle for a genotyping assay approach that can detect single nucleotide polymorphisms (SNPs) through the gold nanoparticle assembly and the ligase reaction. By incorporating the high-fidelity DNA ligase (Tth DNA ligase) into the allele-specific ligation-based gold nanoparticle assembly, this assay provided a convenient yet powerful colorimetric detection that enabled a straightforward single-base discrimination without the need of precise temperature control. Additionally, the ligase reaction can be performed at a relatively high temperature, which offers the benefit for mitigating the non-specific assembly of gold nanoparticles induced by interfering DNA strands. The assay could be implemented via three steps: a hybridization reaction that allowed two gold nanoparticle-tagged probes to hybrid with the target DNA strand, a ligase reaction that generates the ligation between perfectly matched probes while no ligation occurred between mismatched ones and a thermal treatment at a relatively high temperature that discriminate the ligation of probes. When the reaction mixture was heated to denature the formed duplex, the purple color of the perfect-match solution would not revert to red, while the mismatch gave a red color as the assembled gold nanoparticles disparted. The present approach has been demonstrated with the identification of a single-base mutation in codon 12 of a K-ras oncogene that is of significant value for colorectal cancers diagnosis, and the wild-type and mutant type were successfully scored. To our knowledge, this was the first report concerning SNP detection based on the ligase reaction and the gold nanoparticle assembly. Owing to its ease of operation and high specificity, it was expected that the proposed procedure might hold great promise in practical clinical diagnosis of gene-mutant diseases.     

Label‐free,zeptomole cancer biomarker detection by surface‐enhanced fluorescence on nanoporous gold disk plasmonic nanoparticles

We experimentally demonstrate a label‐free biosensor for the ERBB2 cancer gene DNA target based on the distance‐dependent detection of surface‐enhanced fluorescence (SEF) on nanoporous gold disk (NPGD) plasmonic nanoparticles. We achieve detection of 2.4 zeptomole of DNA target on the NPGD substrate with an upper concentration detection limit of 1 nM. Without the use of molecular spacers, the NPGD substrate as an SEF platform was shown to provide higher net fluorescence for visible and NIR fluorophores compared to glass and non‐porous gold substrates. The enhanced fluorescence signals in patterned nanoporous gold nanoparticles make NPGD a viable material for further reducing detection limits for biomolecular targets used in clinical assays.

With patterned nanoporous gold disk (NPGD) plasmonic nanoparticles, a label‐free biosensor that makes use of distance‐dependent detection of surface‐enhanced fluorescence (SEF) is constructed and tested for zeptomole detection of ERBB2 cancer gene DNA targets.     

Optical detection of DNA hybridization based on fluorescence quenching of tagged oligonucleotide probes by gold nanoparticles

A novel system for the detection of DNA hybridization in a homogeneous format is developed. This method is based on fluorescence quenching by gold nanoparticles used as both nanoscaffolds for the immobilization of capture sequences and nanoquenchers of fluorophores attached to detection sequences. The oligonucleotide-functionalized gold nanoparticles are synthesized by derivatizing the colloidal gold solution with 5'-thiolated 12-base oligonucleotides. Introduction of sequence-specific target DNAs (24 bases) into the mixture containing dye-tagged detection sequences and oligonucleotide-functionalized gold nanoparticles results in the quenching of carboxytetramethylrhodamine-labeled DNA fluorescence because DNA hybridization occurs and brings fluorophores into close proximity with oligonucleotide-functionalized gold nanoparticles. The quenching efficiency of fluorescence increases with the target DNA concentration and provides a quantitative measurement of sequence-specific DNA in sample. A linearity is obtained within the range from 1.4 to 92 nM. The target sequence is detected down to 2 nM. This new system not only overcomes many of the drawbacks inherent in radioisotopic measurement or enzyme-linked assay but also avoids the requirement for the stem-loop structure compared with conventional molecular beacons. Furthermore, the background signal that is defined as fluorescence quenching arising from electrostatic attraction between positively charged fluorophores and negatively charged gold nanoparticles is comparatively low due to electrostatic repulsion between negatively charged oligonucleotides. In addition, this is a homogeneous assay that can offer the potential to be monitored in real time, be amenable to automation, eliminate washing steps, and reduce the risk of contamination.     

Radiosensitization of DNA by gold nanoparticles irradiated with high-energy electrons

Zheng, Y., Hunting, D. J., Ayotte, P. and Sanche, L. Radiosensitization of DNA by Gold Nanoparticles Irradiated with High-Energy Electrons. Radiat. Res. 168, 19-27 (2008). Thin films of pGEM-3Zf(-) plasmid DNA were bombarded by 60 keV electrons with and without gold nanoparticles. DNA single- and double-strand breaks (SSBs and DSBs) were measured by agarose gel electrophoresis. From transmission electron micrographs, the gold nanoparticles were found to be closely linked to DNA scaffolds, probably as a result of electrostatic binding. The probabilities for formation of SSBs and DSBs from exposure of 1:1 and 2:1 gold nanoparticle:plasmid mixtures to fast electrons increase by a factor of about 2.5 compared to neat DNA samples. For monolayer DNA adsorbed on a thick gold substrate, the damage increases by an order of magnitude. The results suggest that the enhancement of radiosensitivity is due to the production of additional low-energy secondary electrons caused by the increased absorption of ionizing radiation energy by the metal, in the form of gold nanoparticles or of a thick gold substrate. Since short-range low-energy secondary electrons are produced in large amounts by any type of ionizing radiation, and since on average only one gold nanoparticle per DNA molecule is needed to increase damage considerably, targeting the DNA of cancer cells with gold nanoparticles may offer a novel approach that is generally applicable to radiotherapy treatments.     

Free-standing nanogold membranes as supports for the growth of calcium phosphate crystals

Current strategies for bone tissue regeneration focus on the development of implantable matrices that mimic biological tissues. Inorganic composites are of special interest for bone substitute applications. It is necessary to create an artificial three-dimensional scaffold-like porous material with certain geometrical structure to induce bone growth. We report here the growth of calcium phosphate crystals on free-standing carboxylic acid functionalized gold nanoparticle membranes. The gold nanoparticle membrane is synthesized by the spontaneous reduction of aqueous chloroaurate ions by a diamine molecule at a liquid-liquid interface. This membrane is robust and malleable, and most importantly, the gold nanoparticles in the membrane may be functionalized with suitable ligands. In this study, the amino acids aspartic acid and cysteine together with an aromatic bifunctional molecule, anthranilic acid, were used to modify the surface of the gold nanoparticles in the membrane. The free carboxylic acid groups on the gold nanoparticles further to functionalization with these molecules were then used to bind Ca(2+) ions and reacted with phosphate ions to yield calcium phosphate. The nature of the nanogold surface modifier directed the formation of either crystalline hydroxyapatite or amorphous calcium phosphate. The nanogold membrane thus suggests potential biomedical application as biocompatible implants and grafts.     

Accumulation of gold nanoparticles in Brassic juncea

Enzymatic digestion is proposed as a method for concentrating gold nanoparticles produced in plants. The mild conditions of digestion are used in order to avoid an increase in the gold particle size, which would occur with a high-temperature process, so that material suitable for catalysis may be produced. Gold nanoparticles of a 5-50-nm diameter, as revealed by transmission electron microscopy (TEM), at concentrations 760 and 1120 ppm Au, were produced within Brassica juncea grown on soil with 22-48 mg Au kg(-1). X-ray absorption near edge spectroscopy (XANES) reveals that the plant contained approximately equal quantities of Au in the metallic (Au0) and oxidized (Au+1) states. Enzymatic digestion dissolved 55-60 wt% of the plant matter. Due to the loss of the soluble gold fraction, no significant increase in the total concentration of gold in the samples was observed. However, it is likely that the concentration of the gold nanoparticles increased by a factor of two. To obtain a gold concentration suitable for catalytic reactions, around 95 wt% of the starting dry biomass would need to be solubilized or removed, which has not yet been achieved.     

Femtomolar DNA detection by parallel colorimetric darkfield microscopy of functionalized gold nanoparticles

We introduce a sensing platform for specific detection of DNA based on the formation of gold nanoparticles dimers on a surface. The specific coupling of a second gold nanoparticle to a surface bound nanoparticle by DNA hybridization results in a red shift of the nanoparticle plasmon peak. This shift can be detected as a color change in the darkfield image of the gold nanoparticles. Parallel detection of hundreds of gold nanoparticles with a calibrated true color camera enabled us to detect specific binding of target DNA. This enables a limit of detection below 1.0×10(-14) M without the need for a spectrometer or a scanning stage.     

Fine-Tuning the Antimicrobial Profile of Biocompatible Gold Nanoparticles by Sequential Surface Functionalization Using Polyoxometalates and Lysine

Antimicrobial action of nanomaterials is typically assigned to the nanomaterial composition, size and/or shape, whereas influence of complex corona stabilizing the nanoparticle surface is often neglected. We demonstrate sequential surface functionalization of tyrosine-reduced gold nanoparticles (AuNPs^Tyr) with polyoxometalates (POMs) and lysine to explore controlled chemical functionality-driven antimicrobial activity. Our investigations reveal that highly biocompatible gold nanoparticles can be tuned to be a strong antibacterial agent by fine-tuning their surface properties in a controllable manner. The observation from the antimicrobial studies on a gram negative bacterium Escherichia coli were further validated by investigating the anticancer properties of these step-wise surface-controlled materials against A549 human lung carcinoma cells, which showed a similar toxicity pattern. These studies highlight that the nanomaterial toxicity and biological applicability are strongly governed by their surface corona.