Quantum mechanical model for information transfer from DNA to protein

A model for the information transfer from DNA to protein using quantum information and computation techniques is presented. DNA is modeled as the sender and proteins are modeled as the receiver of this information. On the DNA side, a 64-dimensional Hilbert space is used to describe the information stored in DNA triplets (codons). A Hamiltonian matrix is constructed for this space, using the 64 possible codons as base states. The eigenvalues of this matrix are not degenerate. The genetic code is degenerate and proteins comprise only 20 different amino acids. Since information is conserved, the information on the protein side is also described by a 64-dimensional Hilbert space, but the eigenvalues of the corresponding Hamiltonian matrix are degenerate. Each amino acid is described by a Hilbert subspace. This change in Hilbert space structure reflects the nature of the processes involved in information transfer from DNA to protein.     

The prebiotic evolutionary advantage of transferring genetic information from RNA to DNA

In the early 'RNA world' stage of life, RNA stored genetic information and catalyzed chemical reactions. However, the RNA world eventually gave rise to the DNA-RNA-protein world, and this transition included the 'genetic takeover' of information storage by DNA. We investigated evolutionary advantages for using DNA as the genetic material. The error rate of replication imposes a fundamental limit on the amount of information that can be stored in the genome, as mutations degrade information. We compared misincorporation rates of RNA and DNA in experimental non-enzymatic polymerization and calculated the lowest possible error rates from a thermodynamic model. Both analyses found that RNA replication was intrinsically error-prone compared to DNA, suggesting that total genomic information could increase after the transition to DNA. Analysis of the transitional RNA/DNA hybrid duplexes showed that copying RNA into DNA had similar fidelity to RNA replication, so information could be maintained during the genetic takeover. However, copying DNA into RNA was very error-prone, suggesting that attempts to return to the RNA world would result in a considerable loss of information. Therefore, the genetic takeover may have been driven by a combination of increased chemical stability, increased genome size and irreversibility.     

Preferential access to genetic information from endogenous hominin ancient DNA and accurate quantitative SNP-typing via SPEX

The analysis of targeted genetic loci from ancient, forensic and clinical samples is usually built upon polymerase chain reaction (PCR)-generated sequence data. However, many studies have shown that PCR amplification from poor-quality DNA templates can create sequence artefacts at significant levels. With hominin (human and other hominid) samples, the pervasive presence of highly PCR-amplifiable human DNA contaminants in the vast majority of samples can lead to the creation of recombinant hybrids and other non-authentic artefacts. The resulting PCR-generated sequences can then be difficult, if not impossible, to authenticate. In contrast, single primer extension (SPEX)-based approaches can genotype single nucleotide polymorphisms from ancient fragments of DNA as accurately as modern DNA. A single SPEX-type assay can amplify just one of the duplex DNA strands at target loci and generate a multi-fold depth-of-coverage, with non-authentic recombinant hybrids reduced to undetectable levels. Crucially, SPEX-type approaches can preferentially access genetic information from damaged and degraded endogenous ancient DNA templates over modern human DNA contaminants. The development of SPEX-type assays offers the potential for highly accurate, quantitative genotyping from ancient hominin samples.     

Barcoding, types and the Hirudo files: using information content to critically evaluate the identity of DNA barcodes

Species identifications based on DNA barcoding rely on the correct identity of previously barcoded specimens, but little attention has been given to whether deposited barcodes include correspondence to the species' name-bearing type. The information content associated with COX1 sequences in the two most commonly used repositories of barcodes, GenBank and the Barcode of Life Data System (BOLD), is often insufficient for subsequent evaluation of the robustness of the identification procedure. We argue that DNA barcoding and taxonomy alike will benefit from more information content in the annotations of barcoded specimens as this will allow for validation and re-evaluation of the initial specimen identification. The aim should be to closely connect specimens from which reference barcodes are generated with the holotype through straight-forward taxonomy, and geographical and genetic correlations. Annotated information should also include voucher specimens and collector/identifier information. We examine two case studies based on empirical data, in which barcoding and taxonomy benefit from increased information content. On the basis of data from the first case study, we designate a barcoded neotype of the European medicinal leech, Hirudo medicinalis, on morphological and geographical grounds.     

Molecular information technology with DNA

Qian and Winfree constructed complex biochemical circuits with computation capability from scratch, demonstrating the programmability of biomolecules. One day, programming molecular information processing may be just like how electronic machines are programmed today, with exciting applications in nanoscale science and biotechnology.     

Method to eliminate linear DNA from mixture containing nicked circular, supercoiled, and linear plasmid DNA

Preparations of circular plasmid DNA in either supercoiled or nicked circular form often are contaminated with undesired linear DNA fragments arising from shearing/degradation of chromosomal DNA or linearization of plasmid DNA itself. We report a simple enzymatic method, using a combination of λ exonuclease and RecJ_f, for the selective removal of linear DNA from such mixtures. λ exonuclease digests one strand of linear duplex DNA in the 5′ to 3′ direction, whereas RecJ_f, a single-strand-specific exonuclease, digests the remaining complementary single strand into mononucleotides. This combination of exonucleases can remove linear DNA from a mixture of linear and supercoiled DNA, leaving the supercoiled form intact. Furthermore, the inability of λ exonuclease to initiate digestion at nicks or gaps enables the removal of undesired linear DNA when nicked circular DNA has been enzymatically prepared from supercoiled DNA. This method can be useful in the preparation of homogeneous circular plasmid DNA required for therapeutic applications and biophysical studies.     

Column-based method to simultaneously extract DNA, RNA, and proteins from the same sample

We describe a procedure for the simultaneous extraction of proteins and nucleic acids from the same experimental sample allowing for direct correlations between genetic, genomic, and proteomic data. This approach, using commercially available column-based nucleic acid extraction kits, requires no hazardous chemicals and is a quick, reliable, and consistent method for concomitant protein extraction. Buffer choice is critical to completely solubilize all proteins in the sample. Proteins solubilized in radioimmunoprecipitation assay (RIPA) buffer did not represent the entire profile when compared with conventionally extracted proteins using the same buffer at the one-dimensional (1-D) sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) level, however proteins extracted from the columns and solubilized in a two-dimensional (2-D) electrophoresis lysis buffer showed a similar profile to conventionally extracted proteins when analyzed at both the 1-D and the 2-D level. We further showed that proteins extracted using these methods were compatible with Western blot analysis. This technique provides a simple and effective way to analyze protein and nucleic acids simultaneously from the same sample without affecting yield and quality.     

Satellite DNA sequences in the human acrocentric chromosomes: information from translocations and heteromorphisms.

Satellite III DNA has been located by in situ hybridization in chromosomes 1, 3--5, 7, 9, 10, 13--18, 20--22, and Y and ribosomal DNA (rDNA) in the acrocentric chromosomes 13--15, 21, and 22. In the acrocentric chromosomes, the satellite DNA is located in the short arm. Here we report comparisons by in situ hybridization of the amount of satellite DNA in Robertsonian translocation and "normal variant" chromosomes with that in their homologs. In almost all dicentric Robertsonian translocations, the amount of satellite DNA is less than that in the normal homologs, but it is rarely completely absent, indicating that satellite DNA is located between the centromere and the nucleolus organizer region (NOR) and that the breakpoints are within the satellite DNA. The amount of satellite DNA shows a range of variation in "normal" chromosomes, and this is still more extreme in "normal variant" chromosomes, those with large short arm (p+ or ph+) generally having more satellite DNA than those with small short arms (p- or ph-). The cytological satellites are heterogeneous in DNA content; some contain satellite DNA, others apparently do not, and the satellite DNA content is not related to the size or intensity of fluorescence of the satellites. The significance of these variations for the putative functions of satellite DNA is discussed.     

A DNA topoisomerase from trypanosomes able to catenate, decatenate and unknot DNA without ATP

A novel DNA-topoisomerase from Trypanosoma cruzi was partially purified. The enzyme, without ATP addition, catalyzes decatenation of kinetoplast DNA, catenation of circular supercoiled DNAs and unknotting of P4 phage DNA. The presence of Mg++ is required as well as a suitable concentration of KCl. In stoichiometric conditions the trypanosome enzyme induces double-strand DNA cleavage. The reaction is highly stimulated by some chemicals. Such characteristics allow to include this enzyme into the type II class of DNA-topoisomerases.     

Nanostructured layers from DNA, DNA:AU, DNA:C60 clusters

The idea is requisite to coat DNA, DNA:Au, DNA:C60 clusters from water solution, which can be magnetic and electrical active in biosensor systems and to detect their functional properties by microwave techniques (). Our research has been focused on the application of I-V characteristics and surface microwave resonator methods to recognise and predict these molecular interactions based on primary structure and associated physic-chemical properties. In results we have actually shown that these molecular cluster layers on Si and Al2O3 substrates can conduct, switch electric current and respond on power of microwave (additives Au, C60, determine the conductivity of layers). We also aim to apply these Si and Al2O3 ships for Biochip.     

Estimating haplotype frequencies by combining data from large DNA pools with database information

We assume that allele frequency data have been extracted from several large DNA pools, each containing genetic material of up to hundreds of sampled individuals. Our goal is to estimate the haplotype frequencies among the sampled individuals by combining the pooled allele frequency data with prior knowledge about the set of possible haplotypes. Such prior information can be obtained, for example, from a database such as HapMap. We present a Bayesian haplotyping method for pooled DNA based on a continuous approximation of the multinomial distribution. The proposed method is applicable when the sizes of the DNA pools and/or the number of considered loci exceed the limits of several earlier methods. In the example analyses, the proposed model clearly outperforms a deterministic greedy algorithm on real data from the HapMap database. With a small number of loci, the performance of the proposed method is similar to that of an EM-algorithm, which uses a multinormal approximation for the pooled allele frequencies, but which does not utilize prior information about the haplotypes. The method has been implemented using Matlab and the code is available upon request from the authors.     

Heterogeneity of mitochondrial DNA from Saccharomyces cerevisiae and genetic information for tRNA.

Mitochondrial DNA from wild-type Saccharomyces cerevisiae and from an "extreme" petite mutant were analyzed by hybridization of several tRNAs on DNA fragments of different buoyant density, obtained by sonication and fractionation on a CsCl gradient. The hybridization patterns show that the genes for tRNAser, tRNAphe, tRNAhis, tRNAval, tRNAileu are present on wild-type mitochondrial DNA, while only genes for tRNAser and tRNAhis are present on petite mitochondrial DNA; moreover the hybridization patterns indicate that these genes are not clustered and suggest that more than one gene might exist for tRNAser and tRNAhis.