ALK1 signaling inhibits angiogenesis by cooperating with the Notch pathway

Activin receptor-like kinase 1 (ALK1) is an endothelial-specific member of the TGF-β/BMP receptor family that is inactivated in patients with hereditary hemorrhagic telangiectasia (HHT). How ALK1 signaling regulates angiogenesis remains incompletely understood. Here we show that ALK1 inhibits angiogenesis by cooperating with the Notch pathway. Blocking Alk1 signaling during postnatal development in mice leads to retinal hypervascularization and the appearance of arteriovenous malformations (AVMs). Combined blockade of Alk1 and Notch signaling further exacerbates hypervascularization, whereas activation of Alk1 by its high-affinity ligand BMP9 rescues hypersprouting induced by Notch inhibition. Mechanistically, ALK1-dependent SMAD signaling synergizes with activated Notch in stalk cells to induce expression of the Notch targets HEY1 and HEY2, thereby repressing VEGF signaling, tip cell formation, and endothelial sprouting. Taken together, these results uncover a direct link between ALK1 and Notch signaling during vascular morphogenesis that may be relevant to the pathogenesis of HHT vascular lesions.     

Trapping of normal EB1 ligands in aggresomes formed by an EB1 deletion mutant

Background  

EB1 is a microtubule tip-associated protein that interacts with the APC tumour suppressor protein and the p150glued subunit of dynactin. We previously reported that an EB1 deletion mutant that retains both of these interactions but does not directly associate with microtubules (EB1-ΔN2-GFP) spontaneously formed perinuclear aggregates when expressed in COS-7 cells.     

Endothelial, cardiac muscle and skeletal muscle exhibit different viscous and elastic properties as determined by atomic force microscopy

This study evaluated the hypothesis that, due to functional and structural differences, the apparent elastic modulus and viscous behavior of cardiac and skeletal muscle and vascular endothelium would differ. To accurately determine the elastic modulus, the contribution of probe velocity, indentation depth, and the assumed shape of the probe were examined. Hysteresis was observed at high indentation velocities arising from viscous effects. Irreversible deformation was not observed for endothelial cells and hysteresis was negligible below 1 μm/s. For skeletal muscle and cardiac muscle cells, hysteresis was negligible below 0.25 μm/s. Viscous dissipation for endothelial and cardiac muscle cells was higher than for skeletal muscle cells. The calculated elastic modulus was most sensitive to the assumed probe geometry for the first 60 nm of indentation for the three cell types. Modeling the probe as a blunt cone–spherical cap resulted in variation in elastic modulus with indentation depth that was less than that calculated by treating the probe as a conical tip. Substrate contributions were negligible since the elastic modulus reached a steady value for indentations above 60 nm and the probe never indented more than 10% of the cell thickness. Cardiac cells were the stiffest (100.3±10.7 kPa), the skeletal muscle cells were intermediate (24.7±3.5 kPa), and the endothelial cells were the softest with a range of elastic moduli (1.4±0.1 to 6.8±0.4 kPa) depending on the location of the cell surface tested. Cardiac and skeletal muscle exhibited nonlinear elastic behavior. These passive mechanical properties are generally consistent with the function of these different cell types.     

EB1 targets to kinetochores with attached,polymerizing microtubules

Microtubule polymerization dynamics at kinetochores is coupled to chromosome movements, but its regulation there is poorly understood. The plus end tracking protein EB1 is required both for regulating microtubule dynamics and for maintaining a euploid genome. To address the role of EB1 in aneuploidy, we visualized its targeting in mitotic PtK1 cells. Fluorescent EB1, which localized to polymerizing ends of astral and spindle microtubules, was used to track their polymerization. EB1 also associated with a subset of attached kinetochores in late prometaphase and metaphase, and rarely in anaphase. Localization occurred in a narrow crescent, concave toward the centromere, consistent with targeting to the microtubule plus end-kinetochore interface. EB1 did not localize to kinetochores lacking attached kinetochore microtubules in prophase or early prometaphase, or upon nocodazole treatment. By time lapse, EB1 specifically targeted to kinetochores moving antipoleward, coupled to microtubule plus end polymerization, and not during plus end depolymerization. It localized independently of spindle bipolarity, the spindle checkpoint, and dynein/dynactin function. EB1 is the first protein whose targeting reflects kinetochore directionality, unlike other plus end tracking proteins that show enhanced kinetochore binding in the absence of microtubules. Our results suggest EB1 may modulate kinetochore microtubule polymerization and/or attachment.     

CYLD coordinates with EB1 to regulate microtubule dynamics and cell migration

Cylindromatosis (CYLD), a deubiquitinase involved in inflammation and tumorigenesis via the modulation of cell signaling, has recently been identified as a critical regulator of microtubule dynamics. CYLD has also been shown to stimulate cell migration and thereby contribute to normal physiological processes. However, it remains elusive how the regulation of microtubule dynamic properties by CYLD is connected to its role in mediating cell migration. In this study, we performed yeast 2-hybrid screening with CYLD as bait and identified 7 CYLD-interacting proteins, including end-binding protein 1 (EB1). The CYLD–EB1 interaction was confirmed both in cells and in vitro, and these 2 proteins colocalized at the plus ends of microtubules. Interestingly, the association of CYLD with EB1 was significantly increased upon the stimulation of cell migration. CYLD coordinated with EB1 to orchestrate tail retraction, centrosome reorientation, and leading-edge microtubule stabilization in migratory cells. In addition, CYLD acted in concert with EB1 to regulate microtubule assembly in vitro, microtubule nucleation at the centrosome, and microtubule growth at the cell periphery. These data provide mechanistic insights into the actions of CYLD in the regulation of microtubule dynamics and cell migration. These findings also support the notion that coordinated actions of microtubule-binding proteins are critical for microtubule-mediated cellular events.     

The SRSF1 linker induces semi-conservative ESE binding by cooperating with the RRMs

SR proteins promote spliceosome formation by recognizing exonic splicing enhancers (ESEs) during pre-mRNA splicing. Each SR protein binds diverse ESEs using strategies that are yet to be elucidated. Here, we show that the RNA-binding domain (RBD) of SRSF1 optimally binds to decameric purine rich ESE sequences although locations of purines are not stringently specified. The presence of uracils either within or outside of the recognition site is detrimental for binding with SRSF1. The entire RBD, comprised of two RRMs and a glycine-rich linker, is essential for ESE binding. Mutation within each segment reduced or nearly abolished binding, suggesting that these segments mediate cooperative binding. The linker plays a decisive role in organizing ESE binding. The flanking basic regions of the linker appear to communicate with each other in bringing the two RRMs close together to form the complex with RNA. Our study thus suggests semi-conservative adaptable interaction between ESE and SRSF1, and such binding mode is not only essential for the recognition of plethora of physiological ESE sequences but may also be essential for the interaction with various factors during the spliceosome assembly.     

Peptide aptamers define distinct EB1- and EB3-binding motifs and interfere with microtubule dynamics

EB1 is a conserved protein that plays a central role in regulating microtubule dynamics and organization. It binds directly to microtubule plus ends and recruits other plus end–localizing proteins. Most EB1-binding proteins contain a Ser–any residue–Ile-Pro (SxIP) motif. Here we describe the isolation of peptide aptamers with optimized versions of this motif by screening for interaction with the Drosophila EB1 protein. The use of small peptide aptamers to competitively inhibit protein interaction and function is becoming increasingly recognized as a powerful technique. We show that SxIP aptamers can bind microtubule plus ends in cells and functionally act to displace interacting proteins by competitive binding. Their expression in developing flies can interfere with microtubules, altering their dynamics. We also identify aptamers binding to human EB1 and EB3, which have sequence requirements similar to but distinct from each other and from Drosophila EB1. This suggests that EB1 paralogues within one species may interact with overlapping but distinct sets of proteins in cells.     

Targeted Ablation of Nesprin 1 and Nesprin 2 from Murine Myocardium Results in Cardiomyopathy,Altered Nuclear Morphology and Inhibition of the Biomechanical Gene Response

Recent interest has focused on the importance of the nucleus and associated nucleoskeleton in regulating changes in cardiac gene expression in response to biomechanical load. Mutations in genes encoding proteins of the inner nuclear membrane and nucleoskeleton, which cause cardiomyopathy, also disrupt expression of a biomechanically responsive gene program. Furthermore, mutations in the outer nuclear membrane protein Nesprin 1 and 2 have been implicated in cardiomyopathy. Here, we identify for the first time a role for the outer nuclear membrane proteins, Nesprin 1 and Nesprin 2, in regulating gene expression in response to biomechanical load. Ablation of both Nesprin 1 and 2 in cardiomyocytes, but neither alone, resulted in early onset cardiomyopathy. Mutant cardiomyocytes exhibited altered nuclear positioning, shape, and chromatin positioning. Loss of Nesprin 1 or 2, or both, led to impairment of gene expression changes in response to biomechanical stimuli. These data suggest a model whereby biomechanical signals are communicated from proteins of the outer nuclear membrane, to the inner nuclear membrane and nucleoskeleton, to result in changes in gene expression required for adaptation of the cardiomyocyte to changes in biomechanical load, and give insights into etiologies underlying cardiomyopathy consequent to mutations in Nesprin 1 and 2.     

Characteristic of sorption properties of skeletal muscle nuclei in the normal state and with E-avitaminotic muscular dystrophy

Sorption properties of skeletal muscles nuclei in rabbits in normal state and with E-avitaminosis were studied using organic dyes: neutral red (cationic) and turquoise direct light-fast "K" (anionic) and the influence of calcium-modified membrane of nuclei on their sorption. The nuclear surface is established to have both positive and negative charged groups sorbing turquioise direct and neutral red, respectively. The maximum volume of the dyes binding and the dissociation constants of the membrane-dye complex are estimated. It is shown that with muscular dystrophy the number of charged groups of both signs on the nuclear surface decreases. Calcium ions decrease the cationic dye sorption both in the normal state and with dystrophy and insignificantly decrease the anionic dye with dystrophy.     

Modeling of steady-state and relaxation elastic properties of the papillary muscle at rest

The biomechanical modeling of a papillary muscle preparation as an adequate object for studying the properties of the myocardial tissue under uniaxial stretching has been performed. The steady-state and relaxation tests of the papillary muscle of laboratory animals (rabbit and rat) have been conducted in normal conditions and after the maceration of intracellular structures with high ionic strength solution. It has been shown that the main contribution to the viscoelastic properties in the initial range of physiological deformations is made by the connective tissue skeleton, whereas under large physiological deformations, by intracellular structures.     

BubR1 and APC/EB1 cooperate to maintain metaphase chromosome alignment

The accurate segregation of chromosomes in mitosis requires the stable attachment of microtubules to kinetochores. The details of this complex and dynamic process are poorly understood. In this study, we report the interaction of a kinetochore-associated mitotic checkpoint kinase, BubR1, with two microtubule plus end-associated proteins, adenomatous polyposis coli (APC) and EB1, providing a potential link in stable kinetochore microtubule attachment. Using immunodepletion from and antibody addition to Xenopus laevis egg extracts, we show that BubR1 and its kinase activity are essential for positioning chromosomes at the metaphase plate. BubR1 associates with APC and EB1 in egg extracts, and the complex formation is necessary for metaphase chromosome alignment. Using purified components, BubR1 directly phosphorylates APC and forms a ternary complex with APC and microtubules. These findings support a model in which BubR1 kinase may directly regulate APC function involved in stable kinetochore microtubule attachment.     

CLIP-170 interacts with dynactin complex and the APC-binding protein EB1 by different mechanisms

CLIP-170 is a "cytoplasmic linker protein" implicated in endosome-microtubule interactions and in control of microtubule dynamics. CLIP-170 localizes dynamically to growing microtubule plus ends, colocalizing with the dynein activator dynactin and the APC-binding protein EB1. This shared "plus-end tracking" behavior suggests that CLIP-170 might interact with dynactin and/or EB1. We have used site-specific mutagenesis of CLIP-170 and a transfection/colocalization assay to address this question in mammalian tissue culture cells. Our results indicate that CLIP-170 interacts, directly or indirectly, with both dynactin and EB1. We find that the CLIP-170/dynactin interaction is mediated by the second metal binding motif of the CLIP-170 tail. In contrast, the CLIP-170/EB1 interaction requires neither metal binding motif. In addition, our experiments suggest that the CLIP-170/dynactin interaction occurs via the shoulder/sidearm subcomplex of dynactin and can occur in the cytosol (i.e., it does not require microtubule binding). These results have implications for the targeting of both dynactin and EB1 to microtubule plus ends. Our data suggest that the CLIP-170/dynactin interaction can target dynactin complex to microtubule plus ends, although dynactin likely also targets MT plus ends directly via the microtubule binding motif of the p150(Glued) subunit. We find that CLIP-170 mutants alter p150(Glued) localization without affecting EB1, indicating that EB1 can target microtubule plus ends independently of dynactin.     

EB1-microtubule interactions in Xenopus egg extracts: role of EB1 in microtubule stabilization and mechanisms of targeting to microtubules

EB1 targets to polymerizing microtubule ends, where it is favorably positioned to regulate microtubule polymerization and confer molecular recognition of the microtubule end. In this study, we focus on two aspects of the EB1-microtubule interaction: regulation of microtubule dynamics by EB1 and the mechanism of EB1 association with microtubules. Immunodepletion of EB1 from cytostatic factor-arrested M-phase Xenopus egg extracts dramatically reduced microtubule length; this was complemented by readdition of EB1. By time-lapse microscopy, EB1 increased the frequency of microtubule rescues and decreased catastrophes, resulting in increased polymerization and decreased depolymerization and pausing. Imaging of EB1 fluorescence revealed a novel structure: filamentous extensions on microtubule plus ends that appeared during microtubule pauses; loss of these extensions correlated with the abrupt onset of polymerization. Fluorescent EB1 localized to comets at the polymerizing plus ends of microtubules in cytostatic factor extracts and uniformly along the lengths of microtubules in interphase extracts. The temporal decay of EB1 fluorescence from polymerizing microtubule plus ends predicted a dissociation half-life of seconds. Fluorescence recovery after photobleaching also revealed dissociation and rebinding of EB1 to the microtubule wall with a similar half-life. EB1 targeting to microtubules is thus described by a combination of higher affinity binding to polymerizing ends and lower affinity binding along the wall, with continuous dissociation. The latter is likely to be attenuated in interphase. The highly conserved effect of EB1 on microtubule dynamics suggests it belongs to a core set of regulatory factors conserved in higher organisms, and the complex pattern of EB1 targeting to microtubules could be exploited by the cell for coordinating microtubule behaviors.     

EB1 and EB3 control CLIP dissociation from the ends of growing microtubules

EBs and CLIPs are evolutionarily conserved proteins, which associate with the tips of growing microtubules, and regulate microtubule dynamics and their interactions with intracellular structures. In this study we investigated the functional relationship of CLIP-170 and CLIP-115 with the three EB family members, EB1, EB2(RP1), and EB3 in mammalian cells. We showed that both CLIPs bind to EB proteins directly. The C-terminal tyrosine residue of EB proteins is important for this interaction. When EB1 and EB3 or all three EBs were significantly depleted using RNA interference, CLIPs accumulated at the MT tips at a reduced level, because CLIP dissociation from the tips was accelerated. Normal CLIP localization was restored by expression of EB1 but not of EB2. An EB1 mutant lacking the C-terminal tail could also fully rescue CLIP dissociation kinetics, but could only partially restore CLIP accumulation at the tips, suggesting that the interaction of CLIPs with the EB tails contributes to CLIP localization. When EB1 was distributed evenly along the microtubules because of overexpression, it slowed down CLIP dissociation but did not abolish its preferential plus-end localization, indicating that CLIPs possess an intrinsic affinity for growing microtubule ends, which is enhanced by an interaction with the EBs.     

A methanol resorcin-fuchsin stain for elastic tissues and nuclei.

The staining properties of conventional ethanol resorcin-fuchsin and of methanol resorcin-fuchsin were compared. Formula; Dissolve 0.2 g of commercial resorcin-fuschin in 70 ml of methanol or ethanol, add 30 ml of water and 1 m1 of concentrated HC1; stain sections for 4 hours. Both solutions colored elastic and pseudoelastic fibers, cartilage and some mucins. Methanol resorcin-fuchsin also colored nuclei in methacarn- (methanol-chloroform-glacial acetic acid 6:3:1) and formalin-fixed tissues; this nuclear stain withstood counterstaining with picro-dye mictures. Zenker-fixed sections showed diffuse coloration with little or no contrast between nuclei and cytoplasm. Extraction with hot trichloracetic acid abolished binding of methylene blue, but binding of methanol resorcin-fuchsin by nuclei remained unaltered or was enhanced. Experiments with solvents containing various concentrations of methanol, ethanol or isopropanol indicated that the staining patterns of resorcin-fuchsin are determined by the nature and concentration of the alcohol. Methanol resorcin-fuchsin proved useful for simultaneous visualization of elastic tissues and nuclei.