A Novel Plasmonic Zone Plate Lens Based on Nano-Slits with Refractive Index Modulation

Conventionally, plasmonic lenses introduce a phase delay distribution across their surfaces by modulating the dimensions of nanostructures within a metal film. However, there is very limited modulation of the phase delay due to the small dependence of the mode propagation constant on the structure dimensions. In this paper, a novel design of plasmonic zone plate lenses (PZPL) with both slit width and refractive index modulation is proposed to enable integrating more slits in a fixed lens aperture with the extended phase delay range and, therefore, greatly enhance the performance of the devices. More than three-time enhancement of the light intensity at the focus is achieved compared to the structure with only slit width modulation. Like a conventional immersion system, a PZPL embedded in a dielectric is found to have a further improved focusing performance, where light is focused down to a 0.44λ spot using a PZPL with an aperture of 12λ and a focal length of 6λ. Dispersive light-focusing behaviour is also analysed and the modulation of the focal length by colour has a potential application in stacked image sensors and multi-dimensional optical data storage.     

Subwavelength Focusing Using Plasmonic Wavelength-Launched Zone Plate Lenses

We propose a plasmonic wavelength-launched Fresnel zone plate structure for subwavelength focusing. The plasmonic structure consists of a central circular groove surrounded by 12 transparent and opaque zones. All the zones with widths smaller than one half of the incident wavelength are used to enhance the field of evanescent waves in the transmission. Based on the finite-difference time-domain analysis, a focus spot with a full-width at half-maximum of 270 nm (= 0.4λ _in ) can be achieved, accompanied by a largely reduced depolarization effect. The sharp waistline indicates that the surface waves are largely converged in the region of focus.     

High Efficient Far-Field Nanofocusing with Tunable Focus Under Radial Polarization Illumination

We design a new nanofocusing lens for far-field practical applications. The constructively interference of cylindrical surface plasmon launched by the subwavelength metallic structure can form a subdiffraction-limited focus, which is modulated by the dielectric grating from the near field to the far field. The principle of designing such a far-field nanofocusing lens is elucidated in details. The numerical simulations demonstrated that nanoscale focal spot (0.12λ ²) can be realized with 3.6λ in depth of focus and 4.5λ in focal length by reasonably designing parameters of the grating. The focusing efficiency can be 7.335, which is much higher than that of plasmonic microzone plate-like lenses. A blocking chip can enhance the focusing efficiency further as the reflected waves at the entrance would be recollected at the focus. By controlling the number of the grooves in the grating, the focal length can be tuned easily. This design method paved the road for utilizing the plasmonic lens in high-density optical storage, nanolithography, superresolution optical microscopic imaging, optical measurement, and sensing.     

Plasmonic Lens Based on Rectangular Holes

A compact plasmonic lens is proposed in this paper. This plasmonic lens consists of rectangular holes etched on the silver film and arranged on one straight line and possesses the characteristics of short focus length, ultrathin thickness, and strong focus ability. The theoretical design for the plasmonic lens abides by the constructive interference theorem, and the surface plasmon polaritons excited by the holes with linearly polarized light illumination focuses effectively. The plasmonic lenses with single and double focus spots are provided, and the simulation experiment gives the powerful verification. The distinct structure feature and the excellent focusing characteristic of this plasmonic lens are benefit for its applications in optical integration.     

Robustly Efficient Superfocusing of Immersion Plasmonic Lenses Based on Coupled Nanoslits

We report plasmonic lenses consisting of coupled nanoslits immersed in a high-index medium to obtain the robustly efficient superfocusing. Based on the geometrical optics and the wavefront reconstruction theory, an array of nanoslits perforated in a gold film and a series of spacings between adjacent nanoslits are optimally designed to realize the desired phase modulation for light focusing. The numerical results verify the design of each plasmonic lens in excellent agreement. For the given total phase difference of 2π, the immersion plasmonic lenses with smaller lens aperture can have much better focusing performance than the non-immersion one. A superfocusing spot of λ/4.39 is achieved using an oil immersion plasmonic lens with an aperture size of 4.97λ, resulting in a resolution improvement of 68.9 % compared with the non-immersion lens. Moreover, such superfocusing performance can be still well kept when the structural parameters of the lens, e.g., nanoslit width and metal film thickness, are deviated from the original design, making the final implementation of the superfocusing lenses much easier.     

Plasmonic Lens with Multiple-Turn Spiral Nano-Structures

In this paper, we investigate the focusing properties of a plasmonic lens with multiple-turn spiral nano-structures, and analyze its field enhancement effect based on the phase matching theory and finite-difference time-domain simulation. The simulation result demonstrates that a left-hand spiral plasmonic lens can concentrate an incident right-hand circular polarization light into a focal spot with a high focal depth. The intensity of the focal spot could be controlled by altering the number of turns, the radius and the width of the spiral slot. And the focal spot is smaller and has a higher intensity compared to the incident linearly polarized light. This design can also eliminate the requirement of centering the incident beam to the plasmonic lens, making it possible to be used in plasmonic lens array, optical data storage, detection, and other applications.     

Multiple-Wavelength Focusing and Demultiplexing Plasmonic Lens Based on Asymmetric Nanoslit Arrays

A multiple-wavelength focusing and demultiplexing plasmonic lens based on asymmetric nanoslit arrays is designed. The nanoslit arrays are perforated in a gold film and act as metal–insulator–metal plasmonic waveguides. By manipulating the widths of the slit arrays, the plasmonic lens can concentrate two incident plane wave beams to two separated focal points corresponding to their wavelengths. The full wave simulation is performed to verify the designed lens. This work provides a way to design more compact and integrated wavelength-division multiplexing plasmonic devices for nanophotonic communication and spectral imaging.     

Investigation of Physical Limits of Plasmonic Focusing Lens in Different Regions

We present theoretical studies of three regions for plasmonic focusing, which are surface plasmon-dominating, Fresnel, and Fraunhoffer regions. The boundaries of the three regions are defined and the physical behaviors of plasmonic lenses in terms of focal length and focus size in these regions are investigated. A plasmonic lens that renders a subdiffraction-limit focus in the Fresnel region is presented and the lens performance with respect to the design parameters is studied by using finite-difference time-domain simulations. This work can serve as a basis for understanding plasmonic-focusing phenomenon and designing plasmonic lenses for various applications.     

Gap formation and regeneration of tropical mangrove forests in Ranong,Thailand

Tropical mangrove forests are characterized by clear zonation along a tidal gradient, and it has been supposed that the zonation is primarily controlled by soil factors. However, effects of disturbance on mangrove forests are still not well understood and may play an important role on the vegetation patterns and forest dynamics in some forest formations. In this study, the pattern of disturbance regime and its effects on regeneration of tropical mangrove forests along a tidal gradient were investigated in Ranong, Thailand. We established one or two 0.5 ha plots in four vegetation zones, i.e. Sonneratia alba–Avicennia alba zone, Rhizophora apiculata zone, Ra – Bruguiera gymnorrhiza zone, Ceriops tagal–Xylocarpus spp. zone. Gap size (percentage gap area to total study area and individual gap size) was the largest in Sa–Aa zone which is located on the most seaward fringe, and it declined from seaward to inland. Canopy trees of S. alba and A. alba had stunted trunks and showed low tree density. On the contrary, canopy dominants in the other three inland zones, e.g. R. apiculata, B. gymnorrhiza, and Xylocarpus spp., had slender trunks and showed high tree density. Accordingly, differences in disturbance regime among the four zones were resulted from the forest structural features of each zone. Disturbance regime matched with regeneration strategies of canopy dominants. Seedlings and saplings of S. alba and A. alba, which need sunny condition for their growth, were abundant in gaps than in understorey. By contrast, R. apiculata, B. gymnorrhiza, and Xylocarpus spp., which can tolerate less light than S. alba and A. alba, had greater seedling and sapling density under closed canopy than gaps. Many large gaps may enhance the abundance of S. alba and A. alba in Sa–Aa zone, and a few small gaps may prevent the light demanding species to establish and grow in the other inland zones. Correspondence of disturbance regime and regeneration strategies (e.g. light requirement) of canopy dominants may contribute to the maintenance of the present species composition in each of the vegetation zones.     

Active Focal Length Control of Terahertz Slitted Plane Lenses by Magnetoplasmons

Active plasmonic devices are mostly designed at visible frequencies. Here, we propose an active terahertz (THz) plasmonic lens tuned by an external magnetic field. Unlike other tunable devices where the tuning is achieved by changing the plasma frequency of materials, the proposed active lens is tuned by changing the cyclotron frequency through manipulating magnetoplasmons (MPs). We have theoretically investigated the dispersion relation of MPs of a semiconductor?Cinsulator?Csemiconductor structure in the Voigt configuration and systematically designed several lenses realized with a doped semiconductor slab perforated with sub-wavelength slits. It is shown through finite?Cdifference time?Cdomain simulations that THz wave propagating through the designed structure can be focused to a small size spot via the control of MPs. The tuning range of the focal length under the applied magnetic field (up to 1?T) is ??3??, about 50% of the original focal length. Various lenses, including one with two focal spots and a tunable lens for dipole source imaging, are realized for the proposed structure, demonstrating the flexibility of the design approach. The proposed tunable THz plasmonic lenses may find applications in THz science and technology such as THz imaging.     

Super-Resolution Long-Depth Focusing by Radially Polarized Light Irradiation Through Plasmonic Lens in Optical Meso-field

In this paper, we propose a novel plasmonic lens design consisting of an annular slit and concentric grooves. The simulation results show that under radially polarized illumination, a super-resolution long depth of focus (DOF) spot can be achieved in optical meso-field due to the constructive interference of scattered light by the concentric grooves. We also analyze the influence of depth-tuned annular grooves on focusing performance, including focal length, DOF, and full-width half-maximum. Moreover, focusing efficiency can be enhanced (～350 %) by introducing a circular metallic grating which surrounds the annular slit. This plasmonic lens has potential applications in nano-imaging and nano-photolithography.     

Simulation and Analytical Study of Optical Complex Field in Nano-corral Slits Plasmonic Lens

Although spiral plasmonic lens has been proposed as circular polarization analyzer, there is no such plasmonic nanostructure available for linear polarization. In the current work, we have designed nano-corral slits (NCS) plasmonic lens, which focuses the x- and y-polarized light into spatially distinguished plasmonic fields. We have calculated analytically and numerically the electric field intensity and phase of the emission from nano-corral slits plasmonic lens with different pitch lengths under various polarizations of the illumination. It has been shown that one can control the wave front of the output beam of these plasmonic lenses by manipulating the illumination of both circular and linear polarization. Our theoretical study in correlation with FDTD simulation has shown that NCS plasmonic lens with pitch length equal to λ_spp produces scalar vortex beam having optical complex fields with helical wave front and optical singularity at the center under circular polarization of light. When NCS lens (pitch = λ_spp) is illuminated with linearly polarized light, it exhibits binary distribution of phase with same electric field intensity around the center. However, with pitch length of 0.5λ_spp, NCS shows linear dichroism under linearly polarized illumination unlike spiral plasmonic lens (SPL) eliminating the use of circularly polarized light. Optical complex fields produced by these NCS plasmonic lenses may find applications for faster quantum computing, data storage, and telecommunications.

     

Beam Manipulating via an Array of Nanoslits Modified by Perpendicular Cuts and Bumps

We report the observation of focusing and deflection phenomena by employing a novel technique to perform phase front profile design in nanoslit-based planar plasmonic lenses and beam deflectors. Introducing perpendicular cuts and bumps to the perforated nanoslits on a thin metallic film is utilized to change the effective depth of the nanoslits which provide the possibility of manipulating the phase front profile based on the propagation property of the surface plasmon polaritons in the metal–insulator–metal waveguides. Using the dispersive finite-difference time-domain numerical method, simulations are conducted to explore the beam focusing and deflection phenomena, and the performance parameters of the lens and beam deflector include the focal length, full-width half-maximum, depth of focus, the efficiency of focusing, and the deflection angle. The whole structure is formed on a planar thin film which is convenient for miniaturization and high density integration besides that it can be fabricated by well-known techniques such as focused ion beam milling.     

Integration of plasmonic heating and on‐chip temperature sensor for nucleic acid amplification assays

Nucleic acid tests have been widely used for diagnosis of diseases by detecting the relevant genetic markers that are usually amplified using polymerase chain reaction (PCR). This work reports the use of a plasmonic device as an efficient and low‐cost PCR thermocycler to facilitate nucleic acid‐based diagnosis. The thermoplasmonic device, consisting of a one‐dimensional metal grating, exploited the strong light absorption of plasmonic resonance modes to heat up PCR reagents using a near‐infrared laser source. The plasmonic device also integrated a thin‐film thermocouple on the metal grating to monitor the sample temperature. The plasmonic thermocycler is capable of performing a PCR amplification cycle in ~2.5 minutes. We successfully demonstrated the multiplex and real‐time PCR amplifications of the antibiotic resistance genes using the genomic DNAs extracted from Acinetobacter baumannii, Klebsiella pneumonia, Escherichia coli and Campylobacter.     

Plasmonic Focusing in Nanostructures

In this review, we show that by designing the metallic nanostructures, the surface plasmon (SP) focusing has been achieved, with the focusing spot at a subwavelength scale. The central idea is based on the principle of optical interference that the constructive superposition of SPs with phase matching can result in a considerable electric-field enhancement of SPs in the near field, exhibiting a pronounced focusing spot. We first reviewed several new designs for surface plasmon focusing by controlling the metallic geometry or incident light polarization: We made an in-plane plasmonic Fresnel zone plates, a counterpart in optics, which produces an obvious SP focusing effect; We also fabricated the symmetry broken nanocorrals which can provide the spatial phase difference for SPs, and then we propose another plasmon focusing approach by using semicircular nanoslits, which gives rise to the phase difference through changing refractive index of the medium in the nanoslits. Further, we showed that the spiral metallic nanostructure can be severed as plasmonic lens to control the plasmon focusing under a linearly polarized light with different angles.

     

A Design Method for a Micron-Focusing Plasmonic Lens Based on Phase Modulation

A design method of a micron-focusing plasmonic lens is proposed, which consists of a nanoaperture surrounded by concentric annular grooves with fixed width and depth. The phase modulation of the radiation lights decoupled from surface plasmon polariton waves by the annular grooves is realized by altering the radii of the grooves. Based on the principle of the constructive interference, a design formula of a micron-focusing plasmonic lens is deduced. The transmitted fields through the designed plasmonic lenses are numerically simulated with finite-difference time-domain method, and the results show that a circular focusing spot is generated where the focal length can be controlled in several micrometers, which agree with our theoretical analysis.     

Computational Study of Influence of Structuring of Plasmonic Nanolens on Superfocusing

The focusing effect of the plasmonic nanolens is studied systematically. The influence of different construction parameters including the size of the central hole, the ring width of the surrounding concentric grating, the thickness of the metal film, and the distance of the central hole to grating has been simulated by rigorous finite difference time domain method and analyzed. It is found that the intensity of the central nano-spot is linearly proportional to the size of the central hole and inversely linearly proportional to the thickness of the metal film. In addition, the intensity of the lobes can be suppressed effectively by reducing the ring width down to a quarter of plasmon wavelength to achieve a better focusing effect. The influence of the distance of central hole to grating is a little bit complex, but generally, the intensity for the distance of (2n − 1)/2 plasmon wavelength is larger than the case of the distance of nλ_SP. The simulation results can be a general guide for the design of plasmonic nanolenses.     

Experimental Investigation of Focusing of Gold Planar Plasmonic Lenses

To experimentally demonstrate the subwavelength focusing of depth-tuned or non-depth-tuned plasmonic lenses, we first designed this type of lens using diffraction-coupling-angle based method, then fabricated the structure in gold thin film with focused ion beam, and finally characterized its focusing behavior using near-field scanning optical microscope. It is found that this type of lens has a resolution limit on the focal plane due to the field represented by angular spectrum having a cut-off frequency, while at the near field the lens has sub-diffraction limit focusing capability due to the existence of high-angular-frequency components in the field.     

Far-Field Focusing of Spiral Plasmonic Lens

In this paper, we study the nanoscale-focusing effect in the far field for a spiral plasmonic lens with a concentric annular groove by using finite-difference time domain simulation. The simulation result demonstrates that a left-hand spiral plasmonic lens can concentrate an incident right-hand circular polarization light into a focal spot at the exit surface. And this spot can be focused into far field due to constructive interference of the scattered light by the annular groove. The focal length and the focal depth can be adjusted by changing the groove radius and number of grooves within a certain range. These properties make it possible to probe the signal of spiral plasmonic lens in far field by using conventional optical devices.     

Tunable Plasmon-Induced Transparency of Double Continuous Metal Films Sandwiched with a Plasmonic Array

Making a continuous metal film with near-unity transparency has received more and more attention in recent years because of its potential applications for various optoelectronic devices. Here, we theoretically show that a high tunable plasmon-induced transparency metal film structure can be performed by double continuous metal films inserted with a two-dimensional hexagonal lattice array of plasmonic nanopariticles. The proposed structure shows near-unity anti-reflection and intensively enhanced transmission via the cooperative effects of strong resonant near-field light input and output coupling by the plasmonic array and the excitation of surface electromagnetic waves of the metal films. The optical response can be efficiently mediated by varying the sizes of nanoparticles and the separated distance between the metal array and the metal films. With the merits of high transparency, sub-wavelength sizes and wholly retained metal characteristics including high conductivity via using the pure metallic materials, the structure proposed here suggests various potential applications in optoelectronic integrated circuits.