Stress analysis of carotid plaque rupture based on in vivo high resolution MRI

Atheromatous carotid plaque rupture is responsible for the majority of ischaemic strokes in the developed world. Plaque rupture has been associated with plaque morphology, plaque components' properties, inflammation and local stress concentration. High resolution multi-spectral magnetic resonance imaging (MRI) has allowed the plaque components to be visualized in vivo. This study combined the recent advances in finite element analysis (FEA) and MRI, and performed stress analysis of five vulnerable carotid plaques based on the geometry derived from in vivo MRI. Image segmentation was based on multi-spectral MRI and co-registered with histology for plaque characterization. Plaque fibrous cap, lipid pool and vessel wall were modelled as isotropic, incompressible hyperelastic materials undergoing large deformation under pulse pressure loading. High stress concentrations were predicted at the shoulders and the thinnest fibrous cap regions of the plaque, and the mean maximal stresses were found to be higher in the ruptured plaques (683.3 kPa) than those in the unruptured plaques (226.9 kPa). The effect of the relative stiffness of fibrous cap to lipid pool on the stress within the cap itself was studied. It was shown that larger relative stiffness of fibrous cap to lipid pool resulted in higher stress within the cap. Thus, it is likely that high stress concentrations in vulnerable plaque may cause plaque rupture and lead to acute ischaemic sequelae. A combination of in vivo high resolution MRI and FEA could potentially act as a useful tool to assess plaque vulnerability and risk stratify patients with carotid atheroma.     

Effects of varied lipid core volume and fibrous cap thickness on stress distribution in carotid arterial plaques

The rupture of atherosclerotic plaques is known to be associated with the stresses that act on or within the arterial wall. The extreme wall tensile stress is usually recognized as a primary trigger for the rupture of the plaque. The present study used one-way fluid-structure interaction simulation to investigate the impacts of fibrous cap thickness and lipid core volume to the wall tensile stress value and distributions on the fibrous cap. Von Mises stress was employed to represent the wall tensile stress (VWTS). A total of 13 carotid bifurcation cases were manipulated based on a base geometry in the study with varied combinations of fibrous cap thickness and lipid core volume in the plaque. Values of maximum VWTS and a stress value of VWTS_90, which represents the cut-off VWTS value of 90% in cumulative histogram of VWTS possessed at the computational nodes on the luminal surface of fibrous cap, were used to assess the risk of plaque rupture for each case. Both parameters are capable of separating the simulation cases into vulnerable and more stable plaque groups, while VWTS_90 is more robust for plaque rupture risk assessment. The results show that the stress level on the fibrous cap is much more sensitive to the changes in the fibrous cap thickness than the lipid core volume. A slight decrease of cap thickness can cause a significant increase of stress. For all simulation cases, high VWTS appears at the fibrous cap near the lipid core (plaque shoulder) regions.     

Apoptosis and acute coronary syndromes

Atherosclerosis is an inflammatory disease of the arterial wall. Ischemic manifestations of atherosclerosis are mainly due to thrombus formation upon a superficially eroded (denudation of luminal endothelium, 40% of cases) or deeply ruptured (fibrous cap rupture, 60% of cases) plaques. Recent studies have unraveled potentially critical roles for both inflammatory and apoptotic processes in plaque destabilization leading to thrombus formation. Pro-inflammatory mediators have been particularly implicated in the loss of smooth muscle cell and the promotion of collagen degradation that are responsible for fibrous cap rupture, whereas apoptosis has been identified as one of the major determinants of plaque thrombogenicity.     

Carotid arterial plaque stress analysis using fluid–structure interactive simulation based on in-vivo magnetic resonance images of four patients

The rupture of atherosclerotic plaques is known to be associated with the stresses that act on or within the arterial wall. The extreme wall tensile stress (WTS) is usually recognized as a primary trigger for the rupture of vulnerable plaque. The present study used the in-vivo high-resolution multi-spectral magnetic resonance imaging (MRI) for carotid arterial plaque morphology reconstruction. Image segmentation of different plaque components was based on the multi-spectral MRI and co-registered with different sequences for the patient. Stress analysis was performed on totally four subjects with different plaque burden by fluid–structure interaction (FSI) simulations. Wall shear stress distributions are highly related to the degree of stenosis, while the level of its magnitude is much lower than the WTS in the fibrous cap. WTS is higher in the luminal wall and lower at the outer wall, with the lowest stress at the lipid region. Local stress concentrations are well confined in the thinner fibrous cap region, and usually locating in the plaque shoulder; the introduction of relative stress variation during a cycle in the fibrous cap can be a potential indicator for plaque fatigue process in the thin fibrous cap. According to stress analysis of the four subjects, a risk assessment in terms of mechanical factors could be made, which may be helpful in clinical practice. However, more subjects with patient specific analysis are desirable for plaque-stability study.     

The influence of vascular anatomy on carotid artery stenting: A parametric study for damage assessment

Carotid artery stenting is emerging as an alternative technique to surgery for the treatment of symptomatic severe carotid stenosis. Clinical and experimental evidence demonstrates that both plaque morphology and biomechanical changes due to the device implantation can be possible causes of an unsuccessful treatment. In order to gain further insights of the endovascular intervention, a virtual environment based on structural finite element simulations was built to emulate the stenting procedure on generalized atherosclerotic carotid geometries which included a damage model to quantify the injury of the vessel. Five possible lesion scenarios were simulated by changing both material properties and vascular geometrical features to cover both presumed vulnerable and stable plaques. The results were analyzed with respect to lumen gain and wall stresses which are potentially related to the failure of the procedure according to previous studies. Our findings show that an elliptic lumen shape and a thinner fibrous cap with an underlying lipid pool result in higher stenosis reduction, while large calcifications and fibrotic tissue are more prone to recoil. The shielding effect of a thicker fibrous cap helps to reduce local compressive stresses in the soft plaque. The presence of a soft plaque reduces the damage in the healthy vascular structures. Contrarily, the presence of hard plaque promotes less damage volume in the fibrous cap and reduces stress peaks in this region, but they seem to increase stresses in the media-intima layer. Finally the reliability of the achieved results was put into clinical perspective.     

Necrotic core thickness and positive arterial remodeling index: emergent biomechanical factors for evaluating the risk of plaque rupture

Fibrous cap thickness is often considered as diagnostic of the degree of plaque instability. Necrotic core area (Core(area)) and the arterial remodeling index (Remod(index)), on the other hand, are difficult to use as clinical morphological indexes: literature data show a wide dispersion of Core(area) thresholds above which plaque becomes unstable. Although histopathology shows a strong correlation between Core(area) and Remod(index), it remains unclear how these interact and affect peak cap stress (Cap(stress)), a known predictor of rupture. The aim of this study was to investigate the change in plaque vulnerability as a function of necrotic core size and plaque morphology. Cap(stress) value was calculated on 5,500 idealized atherosclerotic vessel models that had the original feature of mimicking the positive arterial remodeling process described by Glagov. Twenty-four nonruptured plaques acquired by intravascular ultrasound on patients were used to test the performance of the associated idealized morphological models. Taking advantage of the extensive simulations, we investigated the effects of anatomical plaque features on Cap(stress). It was found that: 1) at the early stages of positive remodeling, lesions were more prone to rupture, which could explain the progression and growth of clinically silent plaques and 2) in addition to cap thickness, necrotic core thickness, rather than area, was critical in determining plaque stability. This study demonstrates that plaque instability is to be viewed not as a consequence of fibrous cap thickness alone but rather as a combination of cap thickness, necrotic core thickness, and the arterial remodeling index.     

Mechanical action of the blood onto atheromatous plaques: influence of the stenosis shape and morphology

The vulnerability of atheromatous plaques in the carotid artery may be related to several factors, the most important being the degree of severity of the endoluminal stenosis and the thickness of the fibrous cap. It has recently been shown that the plaque length can also affect the mechanical response significantly. However, in their study on the effect of the plaque length, the authors did not consider the variations of the plaque morphology and the shape irregularities that may exist independently of the plaque length. These aspects are developed in this paper. The mechanical interactions between the blood flow and an atheromatous plaque are studied through a numerical model considering fluid–structure interaction. The simulation is achieved using the arbitrary Lagrangian–Eulerian scheme in the COMSOL TM commercial finite element package. The stenosis severity and the plaque length are, respectively, set to 45% and 15 mm. Different shapes of the stenosis are modelled, considering irregularities made of several bumps over the plaque. The resulting flow patterns, wall shear stresses, plaque deformations and stresses in the fibrous cap reveal that the effects of the blood flow are amplified if the slope upstream stenosis is steep or if the plaque morphology is irregular with bumps. More specifically, the maximum stress in the fibrous cap is 50% larger for a steep slope than for a gentle slope. These results offer new perspectives for considering the shape of plaques in the evaluation of the vulnerability.     

胆固醇结晶激活动脉粥样硬化斑块巨噬细胞NLRP3炎症体的途径

动脉粥样硬化既是胆固醇在血管壁聚集的疾病,也是发生在动脉壁的一种低强度慢性炎症形式。近年来有研究证实胆固醇结晶在动脉粥样硬化发生发展中具有重要作用。新的显微技术证实,胆固醇结晶在动脉粥样硬化斑块形成的早期即已出现,并与早期炎症有关。胆固醇结晶通过诱发局部炎症,促进大的脂质核心形成;刺破纤维帽,导致斑块破裂进而促进动脉粥样硬化斑块的进展。在影响斑块进程中,NLRP3炎症体的激活对此发挥了重要的作用。NLRP3炎症体是研究最多最明确的炎症体,其与非炎症性疾病的发生发展密切相关。以胆固醇结晶激活NLRP3炎症体的途径作为研究靶点,为动脉粥样硬化的诊断和治疗提供了新的思路和方法。该文就胆固醇结晶在动脉粥样硬化斑块中激活巨噬细胞NLRP3炎症体的两种途径做一综述。     

Noninvasive detection of macrophages using a nanoparticulate contrast agent for computed tomography

Sudden fibrous cap disruption of 'high-risk' atherosclerotic plaques can trigger the formation of an occlusive thrombus in coronary arteries, causing acute coronary syndromes. High-risk atherosclerotic plaques are characterized by their specific cellular and biological content (in particular, a high density of macrophages), rather than by their impact on the vessel lumen. Early identification of high-risk plaques may be useful for preventing ischemic events. One major hurdle in detecting high-risk atherosclerotic plaques in coronary arteries is the lack of an imaging modality that allows for the identification of atherosclerotic plaque composition with high spatial and temporal resolutions. Here we show that macrophages in atherosclerotic plaques of rabbits can be detected with a clinical X-ray computed tomography (CT) scanner after the intravenous injection of a contrast agent formed of iodinated nanoparticles dispersed with surfactant. This contrast agent may become an important adjunct to the clinical evaluation of coronary arteries with CT.     

Study of carotid arterial plaque stress for symptomatic and asymptomatic patients

Stroke is one of the leading causes of death in the world, resulting mostly from the sudden ruptures of atherosclerosis carotid plaques. Until now, the exact plaque rupture mechanism has not been fully understood, and also the plaque rupture risk stratification. The advanced multi-spectral magnetic resonance imaging (MRI) has allowed the plaque components to be visualized in-vivo and reconstructed by computational modeling. In the study, plaque stress analysis using fully coupled fluid structure interaction was applied to 20 patients (12 symptomatic and 8 asymptomatic) reconstructed from in-vivo MRI, followed by a detailed biomechanics analysis, and morphological feature study. The locally extreme stress conditions can be found in the fibrous cap region, 85% at the plaque shoulder based on the present study cases. Local maximum stress values predicted in the plaque region were found to be significantly higher in symptomatic patients than that in asymptomatic patients (200 ± 43 kPa vs. 127 ± 37 kPa, p=0.001). Plaque stress level, defined by excluding 5% highest stress nodes in the fibrous cap region based on the accumulative histogram of stress experienced on the computational nodes in the fibrous cap, was also significantly higher in symptomatic patients than that in asymptomatic patients (154 ± 32 kPa vs. 111 ± 23 kPa, p<0.05). Although there was no significant difference in lipid core size between the two patient groups, symptomatic group normally had a larger lipid core and a significantly thinner fibrous cap based on the reconstructed plaques using 3D interpolation from stacks of 2D contours. Plaques with a higher stenosis were more likely to have extreme stress conditions upstream of plaque throat. The combined analyses of plaque MR image and plaque stress will advance our understanding of plaque rupture, and provide a useful tool on assessing plaque rupture risk.     

Cholesterol lowering and the vessel wall: new insights and future perspectives.

The basis for most acute coronary events is either rupture or fissuring of unstable atherosclerotic plaques with subsequent thrombosis leading to coronary artery occlusion. The development of atherosclerotic plaques takes several decades, but the mechanical features determining its stability and the risk of rupture can change very rapidly depending on a number of internal factors. Unstable plaques have a large lipid core, a thin overlying fibrous cap and an abundance of inflammatory cells. The most important factor determining the plaque stability is the plasma level of atherogenic LDL particles. Increased levels of these particles cause endothelial dysfunction with impaired vasodilatation capacity and prevalence of vasoconstriction, maintain inflammatory infiltration of the plaque, impair the strength of the fibrous cap and facilitate aggregation and coagulation. Effective lowering of plasma cholesterol by pharmacological and non-pharmacological means can revert most of these processes and increase the plaque's mechanical stability within several hours to days. Lipid lowering therapy can therefore decrease the risk of acute coronary events within a very short space of time. Thus a radical decrease in lipid levels, along with modification of other risk factors, may become the cornerstone for treatment of acute coronary syndromes, in addition to being an effective treatment in primary and secondary prevention of coronary heart disease (CHD).     

Increased aortic stiffness assessed by pulse wave velocity in apolipoprotein E-deficient mice

Atherosclerosis develops and progresses spontaneously in apolipoprotein E-knockout (apoE-KO) mice. A direct consequence of atherosclerosis is an increase in vascular stiffness. Pulse wave velocity (PWV) has been used to assess the stiffness of large vessels and was found to be increased in patients with atherosclerosis. In the present study, aortic stiffness was assessed by PWV in 4- and 13-mo-old apoE-KO mice and age-matched controls (C57BL/6J). In 13-mo-old apoE-KO mice with extensive atherosclerotic lesions in the aorta (61 +/- 4%), PWV increased significantly (3.8 +/- 0.2 m/s) compared with controls (2.9 +/- 0.2 m/s). Endothelial nitric oxide (EDNO)-mediated vasorelaxation in response to ACh was markedly diminished in the aortic rings isolated from 13-mo-old apoE-KO mice compared with age-matched controls. In contrast, in 4-mo-old apoE-KO mice with only moderate atherosclerotic lesions in the aorta (23 +/- 5%), there were no significant changes in PWV and EDNO-mediated relaxation compared with controls. Blood pressure was not different among the four groups of mice. There were no significant differences in endothelium-independent vascular responses to sodium nitroprusside among different groups investigated. Histological evaluation revealed focal fragmentation of the elastic laminae in the aortic walls of 13-mo-old apoE-KO mice. These results demonstrate for the first time that aortic stiffness determined by PWV increases in 13-mo-old apoE-KO mice. Endothelial dysfunction and elastic destruction in vascular wall caused by atherosclerosis may have contributed.     

Mechanical stresses in carotid plaques using MRI-based fluid-structure interaction models

Risk assessment in patients with carotid atherosclerosis relies on the degree of luminal stenosis. Incorporating morphological information on plaque composition obtained noninvasively through the use of magnetic resonance imaging (MRI) could include other variables besides the degree of stenosis into carotid plaque risk assessment. Knowledge of the morphologic composition of the plaque allows determination of mechanic stresses exerted on the protective fibrous cap, which may be of importance in the assessment of plaque vulnerability. Based on image processing of transverse MRI scans, longitudinal 2D fluid-structure interaction (FSI) simulations of carotid atherosclerotic plaques were performed facilitating in-vivo estimation of longitudinal internal fibrous cap stresses. The FSI simulation combined finite element analysis (FEA) with computational fluid dynamics (CFD) simulations of blood-flow variables. Preliminary results from two symptomatic patients revealed longitudinal stress levels (max. 254.1 and 143.2 kPa) approaching established criteria for plaque rupture at known predilection sites of plaque rupture. Determination of longitudinal fibrous cap stresses may prove useful in assessing plaque vulnerability and improve risk stratification in patients with carotid atherosclerosis.     

Quantifying effects of plaque structure and material properties on stress distributions in human atherosclerotic plaques using 3D FSI models

BACKGROUND: Atherosclerotic plaques may rupture without warning and cause acute cardiovascular syndromes such as heart attack and stroke. Methods to assess plaque vulnerability noninvasively and predict possible plaque rupture are urgently needed. METHOD: MRI-based three-dimensional unsteady models for human atherosclerotic plaques with multi-component plaque structure and fluid-structure interactions are introduced to perform mechanical analysis for human atherosclerotic plaques. RESULTS: Stress variations on critical sites such as a thin cap in the plaque can be 300% higher than that at other normal sites. Large calcification block considerably changes stress/strain distributions. Stiffness variations of plaque components (50% reduction or 100% increase) may affect maximal stress values by 20-50%. Plaque cap erosion causes almost no change on maximal stress level at the cap, but leads to 50% increase in maximal strain value. CONCLUSIONS: Effects caused by atherosclerotic plaque structure, cap thickness and erosion, material properties, and pulsating pressure conditions on stress/strain distributions in the plaque are quantified by extensive computational case studies and parameter evaluations. Computational mechanical analysis has good potential to improve accuracy of plaque vulnerability assessment.     

Role of endogenous nitric oxide in progression of atherosclerosis in apolipoprotein E-deficient mice

This study investigated the role of endogenous nitric oxide (NO) in the progression of atherosclerosis in apolipoprotein E-deficient [apoE-knockout (KO)] mice. Mice were treated with N(omega)-nitro-L-arginine methyl ester (L-NAME) an inhibitor of nitric oxide synthase (NOS) or with the NOS substrate L-arginine for 8 wk. L-NAME treatment resulted in a significant inhibition of NO-mediated vascular responses and a significant increase in the atherosclerotic plaque/surface area in the aorta of apoE-KO mice. L-arginine treatment had no influence on endothelial function and did not alter lesion size. Mean arterial blood pressure and serum lipid levels were not altered by the treatments. At the beginning of the study impairment in endothelial function was only apparent in the case of N(G)-nitro-L-arginine-induced, NO-mediated contraction, whereas ACh-induced, NO-mediated relaxation was not different between age-matched apoE-KO and C57Bl/6J mice. After the 8-wk treatment with the NOS inhibitor, both NO-mediated responses were significantly inhibited. The acceleration in lesion size concomitant to the severely impaired NO-mediated responses indicates that lack of endogenous NO is an important progression factor of atherosclerosis in the apoE-KO mouse.     

Apoptosis of vascular smooth muscle cells induces features of plaque vulnerability in atherosclerosis

Vascular smooth muscle cell (VSMC) apoptosis occurs in many arterial diseases, including aneurysm formation, angioplasty restenosis and atherosclerosis. Although VSMC apoptosis promotes vessel remodeling, coagulation and inflammation, its precise contribution to these diseases is unknown, given that apoptosis frequently accompanies vessel injury or alterations to flow. To study the direct consequences of VSMC apoptosis, we generated transgenic mice expressing the human diphtheria toxin receptor (hDTR, encoded by HBEGF) from a minimal Tagln (also known as SM22alpha) promoter. Despite apoptosis inducing loss of 50-70% of VSMCs, normal arteries showed no inflammation, reactive proliferation, thrombosis, remodeling or aneurysm formation. In contrast, VSMC apoptosis in atherosclerotic plaques of SM22alpha-hDTR Apoe-/- mice induced marked thinning of fibrous cap, loss of collagen and matrix, accumulation of cell debris and intense intimal inflammation. We conclude that VSMC apoptosis is 'silent' in normal arteries, which have a large capacity to withstand cell loss. In contrast, VSMC apoptosis alone is sufficient to induce features of plaque vulnerability in atherosclerosis. SM22alpha-hDTR Apoe-/- mice may represent an important new model to test agents proposed to stabilize atherosclerotic plaques.     

Effects of intima stiffness and plaque morphology on peak cap stress

Background  

Rupture of the cap of a vulnerable plaque present in a coronary vessel may cause myocardial infarction and death. Cap rupture occurs when the peak cap stress exceeds the cap strength. The mechanical stress within a cap depends on the plaque morphology and the material characteristics of the plaque components. A parametric study was conducted to assess the effect of intima stiffness and plaque morphology on peak cap stress.     

Autophagy of vascular smooth muscle cells in atherosclerotic lesions

Autophagy genes were first identified in the yeast system and some of their mammalian orthologues have also been characterized. Increasing lines of evidence indicate that various intracellular proteins, including G proteins, mammalian target of rapamycin (mTor) and Pl3K/Akt/PKB, of transmembrane signaling pathways are involved in the regulation of autophagy genes. We have recently discovered autophagy as a mechanism of cell death in atherosclerotic vascular smooth muscle cells (VSMCs). Tumor necrosis factor-alpha (TNF-alpha), insulin-like growth factor-1 (IGF-1), and 7-ketocholesterol can regulate the expression of autophagic genes, including microtubule-associated protein 1 light chain-3 (MAP1LC3) and Beclin 1, through Akt/PKB and c-jun N-terminal signal pathways in VSMCs. However, the balance between cell death and survival of VSMCs in the fibrous cap of atherosclerotic plaques appears to best correlate with plaque instability. Understanding the underlying cellular and molecular mechanisms of autophagy can provide key insights into the cell death machinery of atherosclerotic diseases.     

Initial stress in biomechanical models of atherosclerotic plaques

Rupture of atherosclerotic plaques is the underlying cause for the majority of acute strokes and myocardial infarctions. Rupture of the plaque occurs when the stress in the plaque exceeds the strength of the material locally. Biomechanical stress analyses are commonly based on pressurized geometries, in most cases measured by in-vivo MRI. The geometry is therefore not stress-free. The aim of this study is to identify the effect of neglecting the initial stress state on the plaque stress distribution. Fifty 2D histological sections (7 patients, 9 diseased coronary artery segments), perfusion fixed at 100 mmHg, were segmented and finite element models were created. The Backward Incremental method was applied to determine the initial stress state and the zero-pressure state. Peak plaque and cap stresses were compared with and without initial stress. The effect of initial stress on the peak stress was related to the minimum cap thickness, maximum necrotic core thickness, and necrotic core angle. When accounting for initial stress, the general relations between geometrical features and peak cap stress remain intact. However, on a patient-specific basis, accounting for initial stress has a different effect on the absolute cap stress for each plaque. Incorporating initial stress may therefore improve the accuracy of future stress based rupture risk analyses for atherosclerotic plaques.