基于AFM的细胞表面超微形貌成像与机械特性测量研究进展

原子力显微镜(AFM)以其独特的优势(纳米级空间分辨率、皮牛级力灵敏度、免标记、可在溶液下工作)成为细胞生物学的重要研究手段.AFM不仅可以对活细胞表面超微形貌进行可视化表征,同时还可通过压痕技术对细胞机械特性(如杨氏模量)进行定量测量,为原位探索纳米尺度下单个活细胞动态生理活动及力学行为提供了可行性.过去的数十年中,研究人员利用AFM在细胞超微形貌成像和机械特性测量方面开展了广泛的应用研究,展示了有关细胞生理活动的大量新认识,为生命医药学领域相关问题的解决提供了新的思路;同时AFM自身的性能也在不断得到改进和提升,进一步促进了其在生命科学领域的应用.本文结合作者在应用AFM观测纳米尺度下癌症靶向药物作用效能方面的研究工作,介绍了AFM成像与细胞机械特性测量的原理,总结了近年来AFM用于细胞表面超微形貌成像与机械特性测量所取得的进展,讨论了AFM表征与检测细胞生理特性存在的问题,并对其未来发展方向进行了展望.     

The application of atomic force microscopy to the study of living vertebrate cells in culture

Atomic force microscopy (AFM), a relatively new variant of scanning probe microscopy developed for the material sciences, is becoming an increasingly important tool in other disciplines. In this review I describe in nontechnical terms some of the basic aspects of using AFM to study living vertebrate cells. Although AFM has some unusual attributes such as an ability to be used with living cells, AFM also has attributes that make its use in cell biology a real challenge. This review was written to encourage researchers in the biological and biomedical sciences to consider AFM as a potential (and potent) tool for their cell biological research.     

An AFM-based stiffness clamp for dynamic control of rigidity

Atomic force microscopy (AFM) has become a powerful tool for measuring material properties in biology and imposing mechanical boundary conditions on samples from single molecules to cells and tissues. Constant force or constant height can be maintained in an AFM experiment through feedback control of cantilever deflection, known respectively as a ‘force clamp’ or ‘position clamp’. However, stiffness, the third variable in the Hookean relation F = kx that describes AFM cantilever deflection, has not been dynamically controllable in the same way. Here we present and demonstrate a ‘stiffness clamp’ that can vary the apparent stiffness of an AFM cantilever. This method, employable on any AFM system by modifying feedback control of the cantilever, allows rapid and reversible tuning of the stiffness exposed to the sample in a way that can decouple the role of stiffness from force and deformation. We demonstrated the AFM stiffness clamp on two different samples: a contracting fibroblast cell and an expanding polyacrylamide hydrogel. We found that the fibroblast, a cell type that secretes and organizes the extracellular matrix, exhibited a rapid, sub-second change in traction rate (dF/dt) and contraction velocity (dx/dt) in response to step changes in stiffness between 1–100 nN/µm. This response was independent of the absolute contractile force and cell height, demonstrating that cells can react directly to changes in stiffness alone. In contrast, the hydrogel used in our experiment maintained a constant expansion velocity (dx/dt) over this range of stiffness, while the traction rate (dF/dt) changed with stiffness, showing that passive materials can also behave differently in different stiffness environments. The AFM stiffness clamp presented here, which is applicable to mechanical measurements on both biological and non-biological samples, may be used to investigate cellular mechanotransduction under a wide range of controlled mechanical boundary conditions.     

A new method of biosensing with 1 microl of Escherichia coli suspension using atomic force microscopy

We developed a new method for detecting bacterial cells from 1-mul samples with atomic force microscopy (AFM). The use of a parafilm surface as a sample palette was effective for reacting small amounts of samples with an AFM probe. This was due to the parafilm's hydrophobic, semitransparent, and nonadhesive surface. In this way, all processes, such as the surface functionalization of a cantilever and the adhesion of Escherichia coli cells to a cantilever, were easily completed. In addition, we succeeded in detecting cell adsorption on the same AFM cantilever by both the drive mode and the thermal mode. The resonance frequency shift caused by cell adhesion was clearly detected by the two modes for the first time. Our data indicated the potential of applying AFM nanobiosensing to extremely small amounts of samples.     

In situ measurement of cell stiffness of Arabidopsis roots growing on a glass micropillar support by atomic force microscopy

Atomic force microscopy (AFM) can measure the mechanical properties of plant tissue at the cellular level, but for in situ observations, the sample must be held in place on a rigid support and it is difficult to obtain accurate data for living plants without inhibiting their growth. To investigate the dynamics of root cell stiffness during seedling growth, we circumvented these problems by using an array of glass micropillars as a support to hold an Arabidopsis thaliana root for AFM measurements without inhibiting root growth. The root elongated in the gaps between the pillars and was supported by the pillars. The AFM cantilever could contact the root for repeated measurements over the course of root growth. The elasticity of the root epidermal cells was used as an index of the stiffness. By contrast, we were not able to reliably observe roots on a smooth glass substrate because it was difficult to retain contact between the root and the cantilever without the support of the pillars. Using adhesive to fix the root on the smooth glass plane overcame this issue, but prevented root growth. The glass micropillar support allowed reproducible measurement of the spatial and temporal changes in root cell elasticity, making it possible to perform detailed AFM observations of the dynamics of root cell stiffness.     

Cell dynamic adhesion and elastic properties probed with cylindrical atomic force microscopy cantilever tips

Cell adhesion is required for essential biological functions such as migration, tissue formation and wound healing, and it is mediated by individual molecules that bind specifically to ligands on other cells or on the extracellular matrix. Atomic force microscopy (AFM) has been successfully used to measure cell adhesion at both single molecule and whole cell levels. However, the measurement of inherent cell adhesion properties requires a constant cell-probe contact area during indentation, a requirement which is not fulfilled in common pyramidal or spherical AFM tips. We developed a procedure using focused ion beam (FIB) technology by which we modified silicon pyramidal AFM cantilever tips to obtain flat-ended cylindrical tips with a constant and known area of contact. The tips were validated on elastic gels and living cells. Cylindrical tips showed a fairly linear force-indentation behaviour on both gels and cells for indentations >200 nm. Cylindrical tips coated with ligands were used to quantify inherent dynamic cell adhesion and elastic properties. Force, work of adhesion and elasticity showed a marked dynamic response. In contrast, the deformation applied to the cells before rupture was fairly constant within the probed dynamic range. Taken together, these results suggest that the dynamic adhesion strength is counterbalanced by the dynamic elastic response to keep a constant cell deformation regardless of the applied pulling rate.     

mRNA analysis of single living cells

Analysis of specific gene expression in single living cells may become an important technique for cell biology. So far, no method has been available to detect mRNA in living cells without killing or destroying them. We have developed here a novel method to examine gene expression of living cells using an atomic force microscope (AFM). AFM tip was inserted into living cells to extract mRNAs. The obtained mRNAs were analyzed with RT-PCR, nested PCR, and quantitative PCR. This method enabled us to examine time-dependent gene expression of single living cells without serious damage to the cells.     

Atomic force microscopy: a nanoscopic window on the cell surface

Atomic force microscopy (AFM) techniques provide a versatile platform for imaging and manipulating living cells to single-molecule resolution, thereby enabling us to address pertinent questions in key areas of cell biology, including cell adhesion and signalling, embryonic and tissue development, cell division and shape, and microbial pathogenesis. In this review, we describe the principles of AFM, and survey recent breakthroughs made in AFM-based cell nanoscopy, showing how the technology has increased our molecular understanding of the organization, mechanics, interactions and processes of the cell surface. We also discuss the advantages and limitations of AFM techniques, and the challenges remaining to be addressed in future research.     

Analysis of ligand-receptor interactions in cells by atomic force microscopy

Atomic force microscopy (AFM) increasingly has been used to analyse "receptor" function, either by using purified proteins ("molecular recognition microscopy") or, more recently, in situ in living cells. The latter approach has been enabled by the use of a modified commercial AFM, linked to a confocal microscope, which has allowed adhesion forces between ligands and receptors in cells to be measured and mapped, and downstream cellular responses analysed. We review the application of AFM to cell biology and, in particular, to the study of ligand-receptor interactions and draw examples from our own work and that of others to show the utility of AFM, including for the exploration of cell surface functionalities. We also identify shortcomings of AFM in comparison to "standard" methods, such as receptor auto-radiography or immuno-detection, that are widely applied in cell biology and pharmacological analysis.     

AFM of the Ultrastructural and Mechanical Properties of Lipid-Raft-Disrupted and/or Cold-Treated Endothelial Cells

The nonionic detergent extraction at 4 °C and the cholesterol-depletion-induced lipid raft disruption are the two widely used experimental strategies for lipid raft research. However, the effects of raft disruption and/or cold treatment on the ultrastructural and mechanical properties of cells are still unclear. Here, we evaluated the effects of raft disruption and/or cold (4 °C) treatment on these properties of living human umbilical vein endothelial cells (HUVECs). At first, the cholesterol-depletion-induced raft disruption was visualized by confocal microscopy and atomic force microscopy (AFM) in combination with fluorescent quantum dots. Next, the cold-induced cell contraction and the formation of end-branched filopodia were observed by confocal microscopy and AFM. Then, the cell-surface ultrastructures were imaged by AFM, and the data showed that raft disruption and cold treatment induced opposite effects on cell-surface roughness (a significant decrease and a significant increase, respectively). Moreover, the cell-surface mechanical properties (stiffness and adhesion force) of raft-disrupted- and/or cold-treated HUVECs were measured by the force measurement function of AFM. We found that raft disruption and cold treatment induced parallel effects on cell stiffness (increase) or adhesion force (decrease) and that the combination of the two treatments caused dramatically strengthened effects. Finally, raft disruption was found to significantly impair cell migration as previously reported, whereas temporary cold treatment only caused a slight but nonsignificant decrease in cell migration performed at physiological temperature. Although the mechanisms for causing these results might be complicated and more in-depth studies will be needed, our data may provide important information for better understanding the effects of raft disruption or cold treatment on cells and the two strategies for lipid raft research.     

原子力显微镜在细胞弹性研究中的应用

细胞表面的力学性质会随着细胞所处环境的不同而发生改变,它的变化间接反映出胞内复杂的生理过程。原子力显微镜（atomic force microscope,AFM）能以高的灵敏度和分辨率检测活体细胞,通过利用赫兹模型分析力曲线可以获得细胞的弹性信息。本文简介了原子力显微镜的工作原理与工作模式,着重介绍利用AFM力曲线检测细胞弹性的方法及其在细胞运动、细胞骨架、细胞黏附、细胞病理等方面的应用成果,表明AFM已经成为细胞弹性研究中十分重要的显微技术。     

Spectroscopic Investigation of Local Mechanical Impedance of Living Cells

We studied nanoscale mechanical properties of PC12 living cells with a Force Feedback Microscope using two experimental approaches. The first one consists in measuring the local mechanical impedance of the cell membrane while simultaneously mapping the cell morphology at constant force. As the interaction force is increased, we observe the appearance of the sub-membrane cytoskeleton. We compare our findings with the outcome of other techniques. The second experimental approach consists in a spectroscopic investigation of the cell while varying the tip indentation into the membrane and consequently the applied force. At variance with conventional dynamic Atomic Force Microscopy techniques, here it is not mandatory to work at the first oscillation eigenmode of the cantilever: the excitation frequency of the tip can be chosen arbitrary leading then to new spectroscopic AFM techniques. We found in this way that the mechanical response of the PC12 cell membrane is found to be frequency dependent in the 1 kHz - 10 kHz range. In particular, we observe that the damping coefficient consistently decreases when the excitation frequency is increased.     

ANALYSIS OF LIGAND–RECEPTOR INTERACTIONS IN CELLS BY ATOMIC FORCE MICROSCOPY

ABSTRACT

Atomic force microscopy (AFM) increasingly has been used to analyse “receptor” function, either by using purified proteins (“molecular recognition microscopy”) or, more recently, in situ in living cells. The latter approach has been enabled by the use of a modified commercial AFM, linked to a confocal microscope, which has allowed adhesion forces between ligands and receptors in cells to be measured and mapped, and downstream cellular responses analysed. We review the application of AFM to cell biology and, in particular, to the study of ligand–receptor interactions and draw examples from our own work and that of others to show the utility of AFM, including for the exploration of cell surface functionalities. We also identify shortcomings of AFM in comparison to “standard” methods, such as receptor auto-radiography or immuno-detection, that are widely applied in cell biology and pharmacological analysis.     

PeakForce Tapping resolves individual microvilli on living cells

Microvilli are a common structure found on epithelial cells that increase the apical surface thus enhancing the transmembrane transport capacity and also serve as one of the cell's mechanosensors. These structures are composed of microfilaments and cytoplasm, covered by plasma membrane. Epithelial cell function is usually coupled to the density of microvilli and its individual size illustrated by diseases, in which microvilli degradation causes malabsorption and diarrhea. Atomic force microscopy (AFM) has been widely used to study the topography and morphology of living cells. Visualizing soft and flexible structures such as microvilli on the apical surface of a live cell has been very challenging because the native microvilli structures are displaced and deformed by the interaction with the probe. PeakForce Tapping® is an AFM imaging mode, which allows reducing tip–sample interactions in time (microseconds) and controlling force in the low pico‐Newton range. Data acquisition of this mode was optimized by using a newly developed PeakForce QNM‐Live Cell probe, having a short cantilever with a 17‐µm‐long tip that minimizes hydrodynamic effects between the cantilever and the sample surface. In this paper, we have demonstrated for the first time the visualization of the microvilli on living kidney cells with AFM using PeakForce Tapping. The structures observed display a force dependence representing either the whole microvilli or just the tips of the microvilli layer. Together, PeakForce Tapping allows force control in the low pico‐Newton range and enables the visualization of very soft and flexible structures on living cells under physiological conditions. © 2015 The Authors Journal of Molecular Recognition Published by John Wiley & Sons Ltd.     

Towards nanomicrobiology using atomic force microscopy

At the cross-roads of nanoscience and microbiology, the nanoscale analysis of microbial cells using atomic force microscopy (AFM) is an exciting, rapidly evolving research field. Over the past decade, there has been tremendous progress in our use of AFM to observe membrane proteins and live cells at high resolution. Remarkable advances have also been made in applying force spectroscopy to manipulate single membrane proteins, to map surface properties and receptor sites on cells and to measure cellular interactions at the single-cell and single-molecule levels. In addition, recent developments in cantilever nanosensors have opened up new avenues for the label-free detection of microorganisms and bioanalytes.     

Tracking mechanics and volume of globular cells with atomic force microscopy using a constant-height clamp

To understand the role of physical forces at a cellular level, it is necessary to track mechanical properties during cellular processes. Here we present a protocol that uses flat atomic force microscopy (AFM) cantilevers clamped at constant height, and light microscopy to measure the resistance force, mechanical stress and volume of globular animal cells under compression. We describe the AFM and cantilever setup, live cell culture in the AFM, how to ensure stability of AFM measurements during medium perfusion, integration of optical microscopy to measure parameters such as volume and track intracellular dynamics, and interpretation of the physical parameters measured. Although we use this protocol on trypsinized interphase and mitotic HeLa cells, it can also be applied to other cells with a relatively globular shape, especially animal cells in a low-adhesive environment. After a short setup phase, the protocol can be used to investigate approximately one cell per hour.     

Relative microelastic mapping of living cells by atomic force microscopy.

The spatial and temporal changes of the mechanical properties of living cells reflect complex underlying physiological processes. Following these changes should provide valuable insight into the biological importance of cellular mechanics and their regulation. The tip of an atomic force microscope (AFM) can be used to indent soft samples, and the force versus indentation measurement provides information about the local viscoelasticity. By collecting force-distance curves on a time scale where viscous contributions are small, the forces measured are dominated by the elastic properties of the sample. We have developed an experimental approach, using atomic force microscopy, called force integration to equal limits (FIEL) mapping, to produce robust, internally quantitative maps of relative elasticity. FIEL mapping has the advantage of essentially being independent of the tip-sample contact point and the cantilever spring constant. FIEL maps of living Madine-Darby canine kidney (MDCK) cells show that elasticity is uncoupled from topography and reveal a number of unexpected features. These results present a mode of high-resolution visualization in which the contrast is based on the mechanical properties of the sample.     

Atomic force microscopy imaging and mechanical properties measurement of red blood cells and aggressive cancer cells

Mechanical properties play an important role in regulating cellular activities and are critical for unlocking the mysteries of life. Atomic force microscopy (AFM) enables researchers to measure mechanical properties of single living cells under physiological conditions. Here, AFM was used to investigate the topography and mechanical properties of red blood cells (RBCs) and three types of aggressive cancer cells (Burkitt??s lymphoma Raji, cutaneous lymphoma Hut, and chronic myeloid leukemia K562). The surface topography of the RBCs and the three cancer cells was mapped with a conventional AFM probe, while mechanical properties were investigated with a micro-sphere glued onto a tip-less cantilever. The diameters of RBCs are significantly smaller than those of the cancer cells, and mechanical measurements indicated that Young??s modulus of RBCs is smaller than those of the cancer cells. Aggressive cancer cells have a lower Young??s modulus than that of indolent cancer cells, which may improve our understanding of metastasis.     

Adhesion forces measured between a calcium blocker drug and its receptor in living cells using atomic force microscope

The adhesion force between the tip of an atomic force microscope cantilever derivatized with nimodipine (a calcium blocker, from the dihydropyridine class, currently used in clinical medicine for hypertension) and living cells of Saccharomyces cerevisiae (unicellular eukaryotes which portray ultrastructural features characteristic of higher eukaryotic cells) was measured. This methodology allowed us to locate (and visualize) pores on the cell surface which may be responsible for calcium transportation in the living cells. The interaction of the cantilever derivatized with the calcium blocker and a pore, which can be a calcium channel, is more intense than a non-derivatized cantilever and the pore. Outside the pore (on the rest of cell surface), a derivatized or a non-derivatized cantilever has the same pattern of adhesion force. The information obtained with this method is very important for the design of new, more potent and less toxic drugs for pharmacological use.