AFM imaging of extracellular polymer release by marine diatom Cylindrotheca closterium (Ehrenberg) Reiman & J.C. Lewin

Extracellular polysaccharide production by marine diatoms is a significant route by which photosynthetically produced organic carbon enters the trophic web and may influence the physical environment in the sea. This study highlights the capacity of atomic force microscopy (AFM) for investigating diatom extracellular polysaccharides with a subnanometer resolution. Here we address a ubiquitous marine diatom Cylindrotheca closterium, isolated from the northern Adriatic Sea, and its extracellular polymeric substance (EPS) at a single cell level. We applied a simple procedure for AFM imaging of diatom cells on mica under ambient conditions (in air) to achieve visualization of their EPS with molecular resolution. The EPS represents a web of polysaccharide fibrils with two types of cross-linking: fibrils association forming junction zones and fibril-globule interconnections with globules connecting two or more fibrils. The fibril heights were 0.4-2.6 nm while globules height was in the range of 3-12 nm. Polymer networks of native gel samples from the Northern Adriatic and the network formed by polysaccharides extracted from the C. closterium culture share the same features regarding the fibril heights, pore openings and the mode of fibril association, proving that the macroscopic gel phase in the Northern Adriatic can be formed directly by the self-assembly of diatom released polysaccharide fibrils.     

Self-Assembly of Polysaccharides Gives Rise to Distinct Mechanical Signatures in Marine Gels

Marine-gel biopolymers were recently visualized at the molecular level using atomic force microscopy (AFM) to reveal fine fibril-forming networks with low to high degrees of cross-linking. In this work, we use force spectroscopy to quantify the intra- and intermolecular forces within the marine-gel network. Combining force measurements, AFM imaging, and the known chemical composition of marine gels allows us to identify the microscopic origins of distinct mechanical responses. At the single-fibril level, we uncover force-extension curves that resemble those of individual polysaccharide fibrils. They exhibit entropic elasticity followed by extensions associated with chair-to-boat transitions specific to the type of polysaccharide at high forces. Surprisingly, a low degree of cross-linking leads to sawtooth patterns that we attribute to the unraveling of polysaccharide entanglements. At a high degree of cross-linking, we observe force plateaus that arise from unzipping, as well as unwinding, of helical bundles. Finally, the complex 3D network structure gives rise to force staircases of increasing height that correspond to the hierarchical peeling of fibrils away from the junction zones. In addition, we show that these diverse mechanical responses also arise in reconstituted polysaccharide gels, which highlights their dominant role in the mechanical architecture of marine gels.     

Self-Assembly of Polysaccharides Gives Rise to Distinct Mechanical Signatures in Marine Gels

Marine-gel biopolymers were recently visualized at the molecular level using atomic force microscopy (AFM) to reveal fine fibril-forming networks with low to high degrees of cross-linking. In this work, we use force spectroscopy to quantify the intra- and intermolecular forces within the marine-gel network. Combining force measurements, AFM imaging, and the known chemical composition of marine gels allows us to identify the microscopic origins of distinct mechanical responses. At the single-fibril level, we uncover force-extension curves that resemble those of individual polysaccharide fibrils. They exhibit entropic elasticity followed by extensions associated with chair-to-boat transitions specific to the type of polysaccharide at high forces. Surprisingly, a low degree of cross-linking leads to sawtooth patterns that we attribute to the unraveling of polysaccharide entanglements. At a high degree of cross-linking, we observe force plateaus that arise from unzipping, as well as unwinding, of helical bundles. Finally, the complex 3D network structure gives rise to force staircases of increasing height that correspond to the hierarchical peeling of fibrils away from the junction zones. In addition, we show that these diverse mechanical responses also arise in reconstituted polysaccharide gels, which highlights their dominant role in the mechanical architecture of marine gels.     

Controlled self-assembly of collagen fibrils by an automated dialysis system

In vitro self-assembled collagen fibrils form a variety of different structures during dialysis. The self-assembly is dependent on several parameters, such as concentrations of collagen and alpha1-acid glycoprotein, temperature, dialysis time, and the acid concentration. For a detailed understanding of the assembly pathway and structural features like banding pattern or mechanical properties it is necessary to study single collagen fibrils. In this work we present a fully automated system to control the permeation of molecules through a membrane like a dialysis tubing. This allows us to ramp arbitrary diffusion rate profiles during the self-assembly process of macromolecules, such as collagen. The system combines a molecular sieving method with a computer assisted control system for measuring process variables. With the regulation of the diffusion rate it is possible to control and manipulate the collagen self-assembly process during the whole process time. Its performance is demonstrated by the preparation of various collagen type I fibrils and native collagen type II fibrils. The combination with the atomic force microscope (AFM) allows a high resolution characterization of the self-assembled fibrils. In principle, the represented system can be also applied for the production of other biomolecules, where a dialysis enhanced self-assembly process is used.     

Structural investigations on native collagen type I fibrils using AFM

This study was carried out to determine the elastic properties of single collagen type I fibrils with the use of atomic force microscopy (AFM). Native collagen fibrils were formed by self-assembly in vitro characterized with the AFM. To confirm the inner assembly of the collagen fibrils, the AFM was used as a microdissection tool. Native collagen type I fibrils were dissected and the inner core uncovered. To determine the elastic properties of collagen fibrils the tip of the AFM was used as a nanoindentor by recording force-displacement curves. Measurements were done on the outer shell and in the core of the fibril. The structural investigations revealed the banding of the shell also in the core of native collagen fibrils. Nanoindentation experiments showed the same Young's modulus on the shell as well as in the core of the investigated native collagen fibrils. In addition, the measurements indicate a higher adhesion in the core of the collagen fibrils compared to the shell.     

On the Structural Diversity and Individuality of Polymorphic Amyloid Protein Assemblies

The prediction of highly ordered three-dimensional structures of amyloid protein fibrils from the amino acid sequences of their monomeric self-assembly precursors constitutes a challenging and unresolved aspect of the classical protein folding problem. Because of the polymorphic nature of amyloid assembly whereby polypeptide chains of identical amino acid sequences under identical conditions are capable of self-assembly into a spectrum of different fibril structures, the prediction of amyloid structures from an amino acid sequence requires a detailed and holistic understanding of its assembly free energy landscape. The full extent of the structure space accessible to the cross-β molecular architecture of amyloid must also be resolved. Here, we review the current understanding of the diversity and the individuality of amyloid structures, and how the polymorphic landscape of amyloid links to biology and disease phenotypes. We present a comprehensive review of structural models of amyloid fibrils derived by cryo-EM, ssNMR and AFM to date, and discuss the challenges ahead for resolving the structural basis and the biological consequences of polymorphic amyloid assemblies.     

Observing growth steps of collagen self-assembly by time-lapse high-resolution atomic force microscopy

Insights into molecular mechanisms of collagen assembly are important for understanding countless biological processes and at the same time a prerequisite for many biotechnological and medical applications. In this work, the self-assembly of collagen type I molecules into fibrils could be directly observed using time-lapse atomic force microscopy (AFM). The smallest isolated fibrillar structures initiating fibril growth showed a thickness of approximately 1.5 nm corresponding to that of a single collagen molecule. Fibrils assembled in vitro established an axial D-periodicity of approximately 67 nm such as typically observed for in vivo assembled collagen fibrils from tendon. At given collagen concentrations of the buffer solution the fibrils showed constant lateral and longitudinal growth rates. Single fibrils continuously grew and fused with each other until the supporting surface was completely covered by a nanoscopically well-defined collagen matrix. Their thickness of approximately 3 nm suggests that the fibrils were build from laterally assembled collagen microfibrils. Laterally the fibrils grew in steps of approximately 4 nm, indicating microfibril formation and incorporation. Thus, we suggest collagen fibrils assembling in a two-step process. In a first step, collagen molecules assemble with each other. In the second step, these molecules then rearrange into microfibrils which form the building blocks of collagen fibrils. High-resolution AFM topographs revealed substructural details of the D-band architecture of the fibrils forming the collagen matrix. These substructures correlated well with those revealed from positively stained collagen fibers imaged by transmission electron microscopy.     

Oriented epitaxial growth of amyloid fibrils of the N27C mutant β25–35 peptide

Amyloid fibrils are present in the extracellular space of various tissues in neurodegenerative and protein misfolding diseases. Amyloid fibrils may be used in nanotechnology applications, because of their self-assembly properties and stability, if their growth and orientation can be controlled. Recently, we have shown that amyloid beta 25-35 (A beta 25-35) forms a highly oriented, K(+)-dependent network on mica. Here, we analyzed the properties of A beta 25-35_N27C, the cysteine residue of which may be used for subsequent chemical modifications. We find that A beta 25-35_N27C forms epitaxially growing fibrils on mica, which evolve into a trigonally oriented branched network. The binding is apparently more sensitive to cation concentration than that of the wild-type peptide. By nanomanipulating A beta 25-35_N27C fibrils with a gold-coated AFM tip, we show that the sulfhydryl of Cys27 is reactive and accessible from the solution. The oriented network of A beta 25-35_N27C fibrils can therefore be specifically labeled and may be used for constructing nanobiotechnological devices.     

In situ atomic force microscopy of partially demineralized human dentin collagen fibrils

Dentin collagen fibrils were studied in situ by atomic force microscopy (AFM). New data on size distribution and the axial repeat distance of hydrated and dehydrated collagen type I fibrils are presented. Polished dentin disks from third molars were partially demineralized with citric acid, leaving proteins and the collagen matrix. At this stage collagen fibrils were not resolved by AFM, but after exposure to NaOCl(aq) for 100-240 s, and presumably due to the removal of noncollagenous proteins, individual collagen fibrils and the fibril network of dentin connected to the mineralized substrate were revealed. High-aspect-ratio silicon tips in tapping mode were used to image the soft fibril network. Hydrated fibrils showed three distinct groups of diameters: 100, 91, and 83 nm and a narrow distribution of the axial repeat distance at 67 nm. Dehydration resulted in a broad distribution of the fibril diameters between 75 and 105 nm and a division of the axial repeat distance into three groups at 67, 62, and 57 nm. Subfibrillar features (4 nm) were observed on hydrated and dehydrated fibrils. The gap depth between the thick and thin repeating segments of the fibrils varied from 3 to 7 nm. Phase mode revealed mineral particles on the transition from the gap to the overlap zone of the fibrils. This method appears to be a powerful tool for the analysis of fibrillar collagen structures in calcified tissues and may aid in understanding the differences in collagen affected by chemical treatments or by diseases.     

The potential of production of sulfated polysaccharides from Porphyridium

Summary The environmental conditions prevailing in Israel make marine algae an attractive crop for the production of valuable chemicals. A marine species of Porphyridium seems to fit this purpose.The unicellular red alga Porphyridium is encapsulated by a polysaccharide envelope that is present in the gel state. This polysaccharide is an acidic heteropolymer composed of sulfated sugars. It forms ionic bridges through divalent cations, thus reaching a very high molecular weight. The thickness of the polysaccharide capsule varies according to the phase of growth and the growth conditions. Its outer part dissolves in the growth medium, which becomes progressively more viscous. Sulfated polysaccharides form theramlly reversible gels similar to agar and carrageenan, which are usually extracted from marine macroalgae. These gels have been finding increasing use in commercial applications as gelling agents, thickeners, stabilizers, and emulsifiers.We have done experiments on the cultivation of a marine species of Porphyridium for the production of polysaccharides. This unicellular alga has an advantage over the macroalgae due to its relatively faster growth rate and the possibility to regulate its growth. The potential for production of the polysaccharide, both that dissolved in the external medium and that attached to the cell (including an intracellular fraction), and the effects of growth conditions on productivity were suudied in the laboratory. Porphyridium was also cultivated outdoors in seawater in 1-m² ponds and its growth potential investigated.     

Structural Identification of Individual Helical Amyloid Filaments by Integration of Cryo-Electron Microscopy-Derived Maps in Comparative Morphometric Atomic Force Microscopy Image Analysis

The presence of amyloid fibrils is a hallmark of more than 50 human disorders, including neurodegenerative diseases and systemic amyloidoses. A key unresolved challenge in understanding the involvement of amyloid in disease is to explain the relationship between individual structural polymorphs of amyloid fibrils, in potentially mixed populations, and the specific pathologies with which they are associated. Although cryo-electron microscopy (cryo-EM) and solid-state nuclear magnetic resonance (ssNMR) spectroscopy methods have been successfully employed in recent years to determine the structures of amyloid fibrils with high resolution detail, they rely on ensemble averaging of fibril structures in the entire sample or significant subpopulations. Here, we report a method for structural identification of individual fibril structures imaged by atomic force microscopy (AFM) by integration of high-resolution maps of amyloid fibrils determined by cryo-EM in comparative AFM image analysis. This approach was demonstrated using the hitherto structurally unresolved amyloid fibrils formed in vitro from a fragment of tau (297–391), termed ‘dGAE’. Our approach established unequivocally that dGAE amyloid fibrils bear no structural relationship to heparin-induced tau fibrils formed in vitro. Furthermore, our comparative analysis resulted in the prediction that dGAE fibrils are structurally closely related to the paired helical filaments (PHFs) isolated from Alzheimer’s disease (AD) brain tissue characterised by cryo-EM. These results show the utility of individual particle structural analysis using AFM, provide a workflow of how cryo-EM data can be incorporated into AFM image analysis and facilitate an integrated structural analysis of amyloid polymorphism.     

Assembly of alpha-synuclein fibrils in nanoscale studied by peptide truncation and AFM

α-Synuclein (α-Syn) fibrils are the major component of Lewy bodies that are closely associated with the pathogenesis of Parkinson’s disease, but the mechanism for the fibril assembly remains poorly understood. Here we report using a combination of peptide truncation and atomic force microscopy (AFM) to elucidate the self-assembly and morphology of the α-Syn fibrils. The results show that protease K significantly slims the fibrils from the mean height of ∼6.6 to ∼4.7 nm, whereas chaotropic denaturant urea completely breaks down the fibrils into small particles. The in situ enzymatic digestion also results in thinning of the fibrils, giving rise to some nicks on the fibrils. Moreover, N- or C-terminally truncated α-Syn fragments assemble into thinner filaments with the heights depending on the peptide lengths. A nine-residue peptide corresponding to the homologous GAV-motif sequence can form very thin (∼2.2 nm) but long (>1 μm) filaments. Thus, the central sequence of α-Syn forms a fibrillar core by cross-β-structure that is flanked by two flexible termini, and the orientation of the fibril growth is perpendicular to the β-sheet structures.     

Atomic force microscopy and FT-IR spectroscopy investigations of human heart valves

Human aortic, mitral, tricuspid and pulmonary heart valves were investigated by the contact mode atomic force microscopy (AFM) in air, and using FT-IR spectroscopy in the frequency range 950-4000 cm(-1). Heart valves were collected post mortem from 65-78 years old patients who died from non-cardiac diseases. All of the examined valves showed considerable heterogeneity in the surface topography of collagen fibrils as well as in their organization on the tissue surface. The AFM images revealed areas with significantly different spatial organization of the collagen fibril bundles. We observed zones with multidirectional, stacked collagen fibrils as well as areas of thin fibrils packed regularly, densely and "in phase". The majority of the collagen fibrils reproduced the typical transverse D-banding pattern, with the band interval varying in rather wide range of 70-90 nm. Using AFM imaging, objects that correspond to some pathological states of heart valves at their early stages, i.e. some forms of mineral deposits, were observed. The FT-IR spectra allowed us to recognize main components, i.e. collagen and elastin, in di.erent layers (ventricularis, fibrosa) of the valve leaflets as well as they gave also support for the presence of mineral deposits on the valve surface. The presented results showed, that the AFM imaging and FT-IR spectroscopy can be applied as a complementary methods for structural characterization of heart valves at the molecular and supramolecular levels.     

Elastic Moduli of Collagen Gels Can Be Predicted from Two-Dimensional Confocal Microscopy

We quantitatively compare data obtained from imaging two-dimensional slices of three-dimensional unlabeled and fluorescently labeled collagen gels with confocal reflectance microscopy (CRM) and/or confocal fluorescence microscopy (CFM). Different network structures are obtained by assembling the gels over a range of concentrations at various temperatures. Comparison between CRM and CFM shows that the techniques are not equally sensitive to details of network structure, with CFM displaying higher fidelity in imaging fibers parallel to the optical axis. Comparison of CRM of plain and labeled collagen gels shows that labeling itself induces changes in gel structure, chiefly through inhibition of fibril bundling. Despite these differences, image analyses carried out on two-dimensional CFM and CRM slices of collagen gels reveal identical trends in structural parameters as a function of collagen concentration and gelation temperature. Fibril diameter approximated from either CRM or CFM is in good accord with that determined via electron microscopy. Two-dimensional CRM images are used to show that semiflexible polymer theory can relate network structural properties to elastic modulus successfully. For networks containing bundled fibrils, it is shown that average structural diameter, rather than fibril diameter, is the length scale that sets the magnitude of the gel elastic modulus.     

Organic solvents mediate self-assembly of GAV-9 peptide on mica surface

Self-assembly of peptides into fibrils and other morphologies has attracted much attention inmany fields,especially in nanofabrication,pathology and biochemistry.In this paper,self-assembly of GAV-9peptide in organic solvents,ethanol and acetone,was investigated using atomic force microscopy(AFM)and attenuated total reflectance-Fourier transform infrared spectroscopy(ATR-FTIR).The results indicatedthat GAV-9 self-assembled into various nanostructures in both solvents after deposited and evaporated onmica.Fibrils with β-sheet conformation were observed in both solvents when the peptide concentrationwas higher than 280 μM.However,ordered fibrils with β-sheet conformation were formed in ethanol,butnot in acetone,with a peptide concentration ranging from 7 μM to 28 μM.We attribute the formation ofvarious nanostructures to the different physicochemical properties of the polar organic solvents on the self-assembly of GAV-9 peptide.     

Improvement of shark type I collagen with microbial transglutaminase in urea

In the presence of urea, type I collagen could form a gel with crosslinks with microbial transglutaminase (MTGase). Collagen self-assembly was accelerated with the addition of MTGase. The proportion of reconstructed collagen fibrils was raised with the addition of MTGase. MTGase-treated collagen gel remained gelled at high temperatures at which collagen denatured. By treatment with MTGase, collagen could form the gel under impossible condition to collagen self-assembly, and that denaturation temperature was raised.     

Fibrillar beta-lactoglobulin gels: Part 1. Fibril formation and structure

As a prelude to experimental and theoretical work on the mechanical properties of fibrillar beta-lactoglobulin gels, this paper reports the structural characterization of beta-lactoglobulin fibrils by electron and atomic force microscopy (AFM), infrared and Raman spectroscopy, and powder X-ray diffraction. Aggregates formed by incubation of beta-lactoglobulin in various alcohol-water mixtures at pH 2, and in water-trifluoroethanol (TFE) at pH 7, were found to be wormlike (approximately 7 nm in width and <500 nm in length), with a "string-of-beads" appearance. Longer (approximately 7 nm in width, and >1 microm in length), smoother, and seemingly stiffer fibrils formed on heating aqueous beta-lactoglobulin solutions at pH 2 and low ionic strength, although there was little evidence for the higher-order structures common in most amyloid-forming systems. Time-lapse AFM also revealed differences in the formation of these two fibril types: thermally induced aggregation occurring more cooperatively, in keeping with a nucleation and growth process. Only short stiff-rods (<20 nm in length) formed on heating beta-lactoglobulin at pH 7, and only complex three-dimensional "amorphous"aggregates in alcohols other than TFE at this pH. Studies of all of the pH 2 fibrils from beta-lactoglobulin, by Raman and infrared spectroscopy confirmed beta-sheet as mediating the aggregation process. Interestingly, however, some evidence for de novo helix formation for the solvent-induced systems was obtained, although it remains to be seen whether this is actually incorporated into the fibril-structure. In contrast to other amyloid systems, X-ray powder diffraction provided no evidence for extensive repeating "crystalline" structures for any of the pH 2 beta-lactoglobulin fibrils. In relation to amyloid, the lactoglobulin fibrils bear more resemblance to protofilaments than to higher-order fibril structures, these latter appearing more convincingly for thermally induced insulin fibrils (pH 2) also included in the AFM study.     

Structural changes in human type I collagen fibrils investigated by force spectroscopy

In the field of biomechanics, collagen fibrils are believed to be robust mechanical structures characterized by a low extensibility. Until very recently, information on the mechanical properties of collagen fibrils could only be derived from ensemble measurements performed on complete tissues such as bone, skin, and tendon. Here, we measure force-elongation/relaxation profiles of single collagen fibrils using atomic force microscopy (AFM)-based force spectroscopy (FS). The elongation profiles show that in vitro-assembled human type I collagen fibrils are characterized by a large extensibility. Numerous discontinuities and a plateau in the force profile indicate major reorganization occurring within the fibrils in the 1.5- to 4.5-nN range. Our study demonstrates that newly assembled collagen fibrils are robust structures with a significant reserve of elasticity that could play a determinant role in the extracellular matrix (ECM) remodeling associated with tissue growth and morphogenesis.     

Improvement of Shark Type I Collagen with Microbial Transglutaminase in Urea

In the presence of urea, type I collagen could form a gel with crosslinks with microbial transglutaminase (MTGase). Collagen self-assembly was accelerated with the addition of MTGase. The proportion of reconstructed collagen fibrils was raised with the addition of MTGase. MTGase-treated collagen gel remained gelled at high temperatures at which collagen denatured. By treatment with MTGase, collagen could form the gel under impossible condition to collagen self-assembly, and that denaturation temperature was raised.