Functional tethered lipid bilayers

Our strategy to provide the structural basis for the build-up of functional tethered membranes focuses on three approaches: the first one is based on the pre-organization of a monomolecular layer of a lipopolymer at the water/air interface which is then transferred to a solid support. Prior to deposition, the substrate is coated with a layer of benzophenone-derivatized silane molecules that allow for a stable covalent attachment by photo-cross-linking of some of the monomer units of the lipopolymer to the support. An alternative concept realizes a layer-by-layer deposition of the various structural elements: (1) the attachment layer with the reactive sites for the chemical stabilization; (2) a polymer 'cushion' prepared by adsorption and simultaneous or subsequent partial covalent binding to the reactive sites; and (3) a lipid monolayer transferred from the water/air interface, that contains a certain amount of lipids with reactive headgroups which, upon binding to the polymer tether, act as anchor lipids stabilizing the whole monolayer/cushion-composite. And finally, we build peptide-supported monolayers by first (self-) assembling amino acid sequences of various lengths via a SH-group near their N-terminus onto Au substances and use then their COO(-)-terminus to chemically attach phosphatidyl-ethanolamine lipids to form a stable monolayer of lipid-peptide conjugates. All the individual preparation steps and the various resulting (multi-) layers are characterized by surface plasmon spectroscopy, X-ray and neutron-reflectometry, contact angle measurements, IR spectroscopy, fluorescence microscopy, scanning probe microscopies, as well as, electrochemical techniques. For all tethering systems, the final membranes' architecture is obtained by fusing lipid vesicles onto the lipid monolayer. Proteins can be incorporated by either fusing vesicles that are loaded with the respective receptors, pores, or ion pumps via a reconstitution procedure, or via a transfer directly from a micellar solution to the pre-formed lipid bilayer at the solid support by a dialysis step. Two structural/dynamical features of tethered membranes which are considered to be of particular functional relevance, i.e. the degree of water uptake and, hence, the degree of swelling of the polymer support, as well as the lateral mobility of the lipid molecules in the membrane, are tested by surface plasmon optics and by measurements of the fluorescence recovery after photobleaching (FRAP), respectively. The results confirm that the presented preparation protocols yield fluid bilayers that mimic certain relevant properties of biological membranes. The functional characterization of tethered membranes, which is briefly summarized, is based on various electrochemical techniques, in particular, impedance spectroscopy, cyclic voltammetry, and chronoamperometric studies. The results obtained for reconstituted H(+)-ATPase from chloroplasts and E. coli and for cytochrome oxidase (with and without cytochrome c) confirm the incorporation of the proteins in an active form, thus, opening opportunities for novel sensor formats or offering a completely new model membrane system.     

Structure of planar membrane formed from liposomes

Lipid vesicles with incorporated ion channels from polyene antibiotic amphotericin B were used to investigate structures of planar membranes formed by Shindler's techniques. A planar membrane assembled on the aperture in a lavsan film from two layers generated at the air-aqueous liposome suspension interface is not a simple bilayer but a bimolecular membrane containing numerous partly fused liposomes. A complete fusion of liposomal membranes with the planar bilayer is an unlikely event during membrane formation. A planar bimolecular lipid membrane without incorporated liposomes can be made by a method consisting of three stages: formation of a lipid layer on the air-water interface of a suspension containing liposomes, transfer of this layer along the surface of the solution into a chamber containing a solution without liposomes where a lipid monomolecular layer forms gradually (within about 20 min) at the air-water interface, assembling of the planar bilayer membrane from this monolayer. The knowledge of the planar membrane structure may be useful in experiments on incorporation of membrane proteins into a planar lipid bilayer.     

Actin binding to lipid-inserted alpha-actinin.

The interaction of alpha-actinin with lipid films and actin filaments was investigated. First alpha-actinin was incorporated in lipid films at the air/water interface. Injection of alpha-actinin into the subphase of a lipid monolayer led to a significant increase of the surface pressure only for lipid films consisting of a mixture of a negatively charged lipid with a high proportion of diacylglycerol. These alpha-actinin-containing films were transferred onto silanized quartz slides. Photobleaching experiments in the evanescent field allowed quantification of the lateral number density of the lipid-bound alpha-actinin. In combination with the area increase from the monolayer experiments, the photobleaching measurements suggest that alpha-actinin is incorporated into the lipid film in such a way that actin binding sites are accessible from the bulk phase. Binding experiments confirmed that the alpha-actinin selectively binds actin filaments in this configuration. We also showed that, in contrast to actin filaments which are adsorbed directly onto planar surfaces, the alpha-actinin-bound actin filaments are recognized and cleaved by the actin-severing protein gelsolin. Thus we have constructed an in vitro system which opens new ways for investigations of membrane-associated actin-binding proteins and of the physical behavior of actin filaments in the close neighborhood to membranes.     

Interaction of CAP18-derived peptides with membranes made from endotoxins or phospholipids

Antimicrobial peptides with alpha-helical structures and positive net charges are in the focus of interest with regard to the development of new antibiotic agents, in particular against Gram-negative bacteria. Interaction between seven polycationic alpha-helical CAP18-derived peptides and different types of artificial membranes composed of phosphatidylcholine or lipopolysaccharide of the Gram-negative bacterium Escherichia coli were investigated using different biophysical techniques. Results obtained from fluorescence energy transfer spectroscopy with liposomes, monolayer measurements on a Langmuir trough, and electrophysiological measurements on planar reconstituted asymmetric bilayer membranes including the lipid matrix of the outer membrane of E. coli were correlated, and these data were, furthermore, correlated with structural parameters of the peptides (net charge, alpha-helical content, hydrophobic moment, and hydrophobicity). All peptides induced current fluctuations in planar membranes due to the formation of transient lesions above a peptide- and lipid-specific minimal clamp voltage. Antibacterial activity was exhibited only by those peptides that induced lesion formation in the reconstituted outer membrane at clamp voltages below the transmembrane potential of the natural membrane. Thus, we propose that the physicochemical properties of both the peptides as well as of the target membranes are important for antibacterial activity.     

Molecular mechanism of β-sheet self-organization at water-hydrophobic interfaces

The capacity to form β‐sheet structure and to self‐organize into amyloid aggregates is a property shared by many proteins. Severe neurodegenerative pathologies such as Alzheimer's disease are thought to involve the interaction of amyloidogenic protein oligomers with neuronal membranes. To understand the experimentally observed catalysis of amyloid formation by lipid membranes and other water‐hydrophobic interfaces, we examine the physico‐chemical basis of peptide adsorption and aggregation in a model membrane using atomistic molecular simulations. Blocked octapeptides with simple, repetitive sequences, (Gly‐Ala)₄, and (Gly‐Val)₄, are used as models of β‐sheet‐forming polypeptide chains found in the core of amyloid fibrils. In the presence of an n‐octane phase mimicking the core of lipid membranes, the peptides spontaneously partition at the octane‐water interface. The adsorption of nonpolar sidechains displaces the peptides' conformational equilibrium from a heterogeneous ensemble characterized by a high degree of structural disorder toward a more ordered ensemble favoring β‐hairpins and elongated β‐strands. At the interface, peptides spontaneously aggregate and rapidly evolve β‐sheet structure on a 10 to 100 ns time scale, while aqueous aggregates remain amorphous. Catalysis of β‐sheet formation results from the combination of the hydrophobic effect and of reduced conformational entropy of the polypeptide chain. While the former drives interfacial partition and displaces the conformational equilibrium of monomeric peptides, the planar interface further facilitates β‐sheet organization by increasing peptide concentration and reducing the dimensionality of self‐assembly from three to two. These findings suggest a general mechanism for the formation of β‐sheets on the surface of globular proteins and for amyloid self‐organization at hydrophobic interfaces. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Atomic force microscopy of nonhydroxy galactocerebroside nanotubes and their self-assembly at the air-water interface, with applications to myelin

Myelin is one of the few biological membranes to contain the lipid galactocerebrosides, although their role in myelin is unclear. To explore its structural role, we used fluorescence and atomic force microscopy (AFM) to study nonhydroxy galactocerebrosides (NCer) at the air-water interface of a Langmuir-Blodgett trough. Fluorescence microscopy at the air-water interface indicated that NCer forms micrometer scale domains of varying radii with six fractal-like extensions. Atomic force microscopy using TappingMode in water on samples transferred to mica confirmed the fractal-like domain structure in the absence of dye and showed that the domains consisted of many aggregated nanotubes with a diameter of 30 nm. The Hausdorf fractal dimension was estimated to be 1.26 and 1.11 for two domains imaged with AFM. This evidence indicates that NCer forms a bulk phase of nanotubes at the air-water interface, unlike the liquid-condensed phase of a phospholipid monolayer. That NCer forms bilayer nanotubes that aggregate strongly suggests NCer helps maintain the stability of myelin by contributing to the curvature and adhesion of the membrane. We found that NCer appears to be decreased in myelin from multiple sclerosis normal appearing white matter, which could be an important event in the loss of myelin stability.     

Immobilized proteins in buffer imaged at molecular resolution by atomic force microscopy.

Samples of supported planar lipid-protein membranes and actin filaments on mica were imaged by atomic force microscopy (AFM). The samples were fully submerged in buffer at room temperature during imaging. Individual proteins bound to the reconstituted membrane were distinguishable; some structural details could be resolved. Also, surface-induced, self-assembling of actin filaments on mica could be observed. Monomeric subunits were imaged on individual actin filaments. The filaments could be manipulated on or removed from the surface by the tip of the AFM. The process of the decoupling of the filamentous network from the surface upon changing the ionic conditions was imaged in real time.     

Imaging of Fas-FasL membrane microdomains during apoptosis in a reconstituted cell-cell junction

The Fas death receptor interacts with its ligand FasL and induces apoptosis. The Fas-FasL interaction occurs at the cell-cell interface in vivo, since both proteins are expressed in cell membranes. However, most studies on the Fas signal pathway have been performed in a nonphysiological manner by using soluble molecules (antibody or crosslinked FasL proteins) to stimulate Fas. The Fas-FasL interaction at the cell-cell contact site has only been studied recently, but the information derived from cell-cell interaction studies is still rather limited and not necessarily consistent with the past results obtained by using soluble Fas-stimulatory molecules. Therefore, we develop a novel reconstituted system that mimics the Fas-FasL interaction at cell-cell contact sites for further examination of the physiological Fas-FasL signaling system. By conjugating FasL extracellular domains to planar lipid bilayers, we created a model cell membrane to activate Fas-expressing cells. Using this system, we generated an image of Fas-FasL interactions at the cell-membrane interface at high resolution. We observed that the Fas-FasL interaction between two membranes creates submicron membrane microdomains. Shortly after microdomain formation, the cells exhibit various features of apoptosis. These results suggest that our reconstituted system provides a useful platform to dissect Fas-FasL apoptosis signaling at near physiological conditions.     

Two-dimensional recognition pattern of lipid-anchored Fab'' fragments.

A two-dimensional pattern of oriented antibody fragments was formed at the air-water interface and transferred onto a solid support. The Fab'-fragments of a monoclonal antibody against the hapten dinitrophenyl (DNP) were covalently linked via a hydrophilic spacer to phospholipid vesicles. A monomolecular lipid-protein layer at equilibrium with these vesicles was allowed to form at the air-water interface. The monolayer was separated from the vesicle phase and transferred to a Langmuir-Blodgett trough. By cooling and compressing, the previously homogeneous lipid-protein film was driven into a two-dimensional phase separation resulting in protein-rich domains and a second phase consisting mainly of lipid. This film was transferred onto a solid support in a way that preserved the protein-lipid pattern. The specificity as well as the contrast in the binding activity of the two different separated phases were then quantified using microfluorometry. DNP conjugated to fluorescein-labeled bovine serum albumin (BSA) showed virtually no binding to the lipid regions, but gave a ratio of bound DNP-BSA to Fab'-lipid of greater than 50% in the protein-rich domains proving that the Fab'-moiety retained its biological activity. This demonstrates that the technique presented here is well suited to modify different solid surfaces with a pattern of a given biological function. The optional control of lateral packing and orientation of the components in the monolayer makes it a general tool for the reconstitution of supported lipid-protein membranes and might also open new ways for the two-dimensional crystallization of proteins at membranes.     

High-resolution AFM of membrane proteins directly incorporated at high density in planar lipid bilayer

The heterologous expression and purification of membrane proteins represent major limitations for their functional and structural analysis. Here we describe a new method of incorporation of transmembrane proteins in planar lipid bilayer starting from 1 pmol of solubilized proteins. The principle relies on the direct incorporation of solubilized proteins into a preformed planar lipid bilayer destabilized by dodecyl-beta-maltoside or dodecyl-beta-thiomaltoside, two detergents widely used in membrane biochemistry. Successful incorporations are reported at 20 degrees C and at 4 degrees C with three bacterial photosynthetic multi-subunit membrane proteins. Height measurements by atomic force microscopy (AFM) of the extramembraneous domains protruding from the bilayer demonstrate that proteins are unidirectionally incorporated within the lipid bilayer through their more hydrophobic domains. Proteins are incorporated at high density into the bilayer and on incubation diffuse and segregate into protein close-packing areas. The high protein density allows high-resolution AFM topographs to be recorded and protein subunits organization delineated. This approach provides an alternative experimental platform to the classical methods of two-dimensional crystallization of membrane proteins for the structural analysis by AFM. Furthermore, the versatility and simplicity of the method are important intrinsic properties for the conception of biosensors and nanobiomaterials involving membrane proteins.     

Free-standing lipid films stabilized by Annexin-A5

Free-standing lipid bilayers in nano- and micro-pores are interesting membrane models and attractive for biotechnological applications. We describe here the controlled preparation of proteo-lipid mono- and bilayers using the Langmuir–Schaefer transfer or Langmuir–Blodgett technique, respectively on hydrophobic and hydrophilic surfaces. We demonstrate the formation of suspended proteo-lipid layers by Transmission Electron Microscopy (TEM) and in situ Atomic Force Microscopy (AFM) imaging. Using Annexin-A5 as a membrane-associated protein, continuous proteo-lipid mono- and bilayers were formed, which span pore arrays over areas of several square-micrometers. The 2D organization of proteins associated to lipid monolayer is well preserved during the transfer process and the protein association is Ca²⁺-dependent and therefore reversible. The simple formation and reliable transfer of stabilized free-standing lipid films is a first crucial step to create biomimetic membranes for biotechnological applications and membrane protein research.     

Effect of monolayer lipid charges on the structure and orientation of protein VAMP1 at the air-water interface

SNARE proteins are implicated in membrane fusion during neurotransmission and peptide hormone secretion. Relatively little is known about the molecular interactions of their trans- and juxtamembrane domains with lipid membranes. Here, we report the structure and the assembling behavior of one of the SNARE proteins, VAMP1/synaptobrevin1 incorporated in a lipid monolayer at an air-water interface which mimics the membrane environment. Our results show that the protein is extremely sensitive to surface pressure as well as the lipid composition. Monolayers of proteins alone or in the presence of the neutral phospholipid DMPC underwent structural transition from α-helix to β-sheet upon surface compression. In contrast, the anionic phospholipid DMPG inhibited this transition in a concentration-dependent manner. Moreover, the orientation of the proteins was highly sensitive to the charge density of the lipid layers. Thus, the structure of VAMP1 is clearly controlled by protein-lipid interactions.     

The hemifusion intermediate and its conversion to complete fusion: regulation by membrane composition.

To fuse, membranes must bend. The energy of each lipid monolayer with respect to bending is minimized at the spontaneous curvature of the monolayer. Two lipids known to promote opposite spontaneous curvatures, lysophosphatidylcholine and arachidonic acid, were added to different sides of planar phospholipid membranes. Lysophosphatidylcholine added to the contacting monolayers of fusing membranes inhibited the hemifusion we observed between lipid vesicles and planar membranes. In contrast, fusion pore formation depended upon the distal monolayer of the planar membrane; lysophosphatidylcholine promoted and arachidonic acid inhibited. Thus, the intermediates of hemifusion and fusion pores in phospholipid membranes involve different membrane monolayers and may have opposite net curvatures, Biological fusion may proceed through similar intermediates.     

Antimicrobial Protegrin-1 Forms Ion Channels: Molecular Dynamic Simulation, Atomic Force Microscopy, and Electrical Conductance Studies

Antimicrobial peptides (AMPs) are an emerging class of antibiotics for controlling health effects of antibiotic-resistant microbial strains. Protegrin-1 (PG-1) is a model antibiotic among β-sheet AMPs. Antibiotic activity of AMPs involves cell membrane damage, yet their membrane interactions, their 3D membrane-associated structures and the mechanism underlying their ability to disrupt cell membrane are poorly understood. Using complementary approaches, including molecular dynamics simulations, atomic force microscopy (AFM) imaging, and planar lipid bilayer reconstitution, we provide computational and experimental evidence that PG-1, a β-hairpin peptide, forms ion channels. Simulations indicate that PG-1 forms channel-like structures with loosely attached subunits when reconstituted in anionic lipid bilayers. AFM images show the presence of channel-like structures when PG-1 is reconstituted in dioleoylphosphatidylserine/palmitoyloleoyl phosphatidylethanolamine bilayers or added to preformed bilayers. Planar lipid bilayer electrical recordings show multiple single channel conductances that are consistent with the heterogeneous oligomeric channel structures seen in AFM images. PG-1 channel formation seems to be lipid-dependent: PG-1 does not easily show ion channel electrical activity in phosphatidylcholine membranes, but readily shows channel activity in membranes rich in phosphatidylethanolamine or phosphatidylserine. The combined results support a model wherein the β-hairpin PG-1 peptide acts as an antibiotic by altering cell ionic homeostasis through ion channel formation in cell membranes.     

Atomic force microscopy for the study of membrane proteins

Fundamental biological processes such as cell-cell communication, signal transduction, molecular transport and energy conversion are performed by membrane proteins. These important proteins are studied best in their native environment, the lipid bilayer. The atomic force microscope (AFM) is the instrument of choice to determine the native surface structure, supramolecular organization, conformational changes and dynamics of membrane-embedded proteins under near-physiological conditions. In addition, membrane proteins are imaged at subnanometer resolution and at the single molecule level with the AFM. This review highlights the major advances and results achieved on reconstituted membrane proteins and native membranes as well as the recent developments of the AFM for imaging.     

Monolayers at the oil/water interface as a proper model for bilayer membranes

In order to clarify the structural relationship between lipid monolayer and bilayer membranes, physical states of these membranes are discussed from their energetic points of view. It is concluded that the monolayer formed at the oil/water interface is a proper model system to represent the physical state of half of a bilayer in its liquid crystalline state. The theoretical prediction is confirmed by the monolayer surface tension measurements and the bilayer conductance experiments with water soluble (extrinsic) proteins. It is also deduced that the surface pressure of the bilayer in the liquid crystalline state is quite high, about 45 dyn/cm, and the interaction of cytochrome c with the bilayer is mainly electrostatic at the bilayer membrane periphery.     

Interactions of lipid monolayers with the natural biopolymer hyaluronic acid

The interaction of the natural mucopolysaccharide hyaluronic acid with different lipids, present in the natural membranes, was studied at the lipid/water interface using thermodynamic methods and X-ray diffraction. The results show that this biopolymer modifies the properties and the structure of the lipid monolayer. The two-dimensional crystalline lattice and domain structure of the charged octadecylamine monolayer are strongly disturbed by the hyaluronic acid, the monolayer compressibility increases and the monolayer collapse pressure drops down. In addition, the presence of charged lipid interfaces influences the structural organisation of the hyaluronic acid at the membrane/water interfaces. The impacts of these results on the structural organisation at the membrane interface are discussed.     

Interactions of lipid monolayers with the natural biopolymer hyaluronic acid

The interaction of the natural mucopolysaccharide hyaluronic acid with different lipids, present in the natural membranes, was studied at the lipid/water interface using thermodynamic methods and X-ray diffraction. The results show that this biopolymer modifies the properties and the structure of the lipid monolayer. The two-dimensional crystalline lattice and domain structure of the charged octadecylamine monolayer are strongly disturbed by the hyaluronic acid, the monolayer compressibility increases and the monolayer collapse pressure drops down. In addition, the presence of charged lipid interfaces influences the structural organisation of the hyaluronic acid at the membrane/water interfaces. The impacts of these results on the structural organisation at the membrane interface are discussed.     

Atomic force microscopy and force spectroscopy study of Langmuir-Blodgett films formed by heteroacid phospholipids of biological interest

Langmuir-Blodgett (LB) films of two heteroacid phospholipids of biological interest 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), as well as a mixed monolayer with chi(POPC)=0.4, were transferred onto mica in order to investigate by a combination of atomic force microscopy (AFM) and force spectroscopy (FS) their height, and particularly, their nanomechanical properties. AFM images of such monolayers extracted at 30 mN m(-1) revealed a smooth and defect-free topography except for the POPE monolayer. Since scratching such soft monolayers in contact mode was proved unsuccessful, their molecular height was measured by means of the width of the jump present in the respective force-extension curves. While for pure POPC a small jump occurs near zero force, for the mixed monolayer with chi(POPC)=0.4 the jump occurs at approximately 800 pN. Widths of approximately 2 nm could be established for POPC and chi(POPC)=0.4, but not for POPE monolayer at this extracting pressure. Such different mechanical stability allowed us to directly measure the threshold area/lipid range value needed to induce mechanical stability to the monolayers. AFM imaging and FS were next applied to get further structural and mechanical insight into the POPE phase transition (LC-LC') occurring at pressures >36.5 mN m(-1). This phase transition was intimately related to a sudden decrease in the area/molecule value, resulting in a jump in the force curve occurring at high force ( approximately 1.72 nN). FS reveals to be the unique experimental technique able to unveil structural and nanomechanical properties for such soft phospholipid monolayers. The biological implications of the nanomechanical properties of the systems under investigation are discussed considering that the annular phospholipids region of some transmembrane proteins is enriched in POPE.     

Physical Properties of Lipid Monolayers on Alkylated Planar Glass Surfaces

A method for transferring a lipid monolayer from an air-water interface to an alkylated glass slide is described. Specific antibodies bind tightly to lipid haptens contained in these monolayers on the glass slides. We conclude that the polar head groups of the lipids face the aqueous phase. A monolayer containing a fluorescent lipid was used to show that the monolayer is homogeneous as observed with an epifluorescence microscope. A periodic pattern photobleaching technique was used to measure the lateral diffusion of this fluorescent lipid probe in monolayers composed of dipalmitoyl phosphatidylcholine and dimyristoyl phosphatidylcholine. Different regions of the pressure-area isotherms of the monolayers at the air-water interface can be correlated with the diffusion of the fluorescent probe molecules on the monolayer-coated glass slide. Monolayers derived from the so-called “solid-condensed” state of a monolayer at the air-water interface showed a very low probe diffusion coefficient in this monolayer when placed on a glass slide, D ≤ 10^-10 cm²/s. Monolayers derived from the “liquid condensed/liquid expanded” (LC/LE) region of the monolayer isotherms at the air-water interface showed rapid diffusion (D > 10^-8 cm²/s) when these same monolayers were observed on an alkylated glass slide. The monolayers attached to the glass slide appear to be homogeneous when derived from monolayers in the LC/LE region of monolayers at the air-water interface. There is no major variation of the diffusion coefficient of a fluorescent lipid probe when this diffusion is measured on a lipid monolayer on a glass slide, for monolayers derived from various regions of the LC/LE monolayers at the air-water interface. This is consistent with the view that the LC/LE region is most likely a single fluid phase. Monolayers supported on a planar glass substrate are of much potential interest for biophysical and biochemical studies of the interactions between model membranes and cellular membranes, and for physical chemical studies relating the properties of lipid monolayers to the properties of lipid bilayers.