Microbial interventions are an easier alternative to engineer higher organisms

Advances in synthetic biology have made microbes easier to engineer than ever before. However, synthetic biology in animals and plants has lagged behind. Since it is now known that the phenotype of higher organisms depends largely on their microbiota, we propose that this is an easier route to achieving synthetic biology applications in these organisms.

A transition from reading to writing biology has blurred the lines between basic science and engineering creating the field of synthetic biology. With an ever‐expanding genetic toolbox, we now manipulate natural biological systems to optimize our anthropocentric activities. From the synthesis of complex aromatic compounds, to the production of safer vaccines, a problem identified may find its solution lying in the metabolism of a single cell. Initially, synthetic biology was largely focused on the production of such commodities at the industrial scale, not only to maximize profitability, but also to minimize energy and resource consumption. Consequently, this paradigm shift has come to alter the notion of a factory by many orders of magnitude and to create a new bridge between the built and natural world, as we employ nature’s evolutionary machinery to address our modern endeavours.Growth of the genetic toolbox and maturation of synthetic biology as a field has led to speculation about increasingly ambitious applications of writing biology with implications beyond biosynthesis. To date, most applications have been developed using microbes because they are less complex, more well understood and easier to manipulate. Single‐celled organisms can be optimized for production of complicated organic molecules; however, other exploits of genetic engineering will target more ambitious feats and thus require engineering of more than a large monoculture of microbes. Applications of synthetic biology outside of the bioreactor can address such issues as health and longevity, challenges in industrial agriculture and farming, the degradation of natural habitats and the reclamation of limited natural resources.Scope and scale of these applications provide obvious obstacles to the development of effective biotechnologies, but a more immediate limitation to realizing these technologies is the relative lack of genetic tools and insights which would allow the tinkering and rewiring of more complex organisms such as animals and plants. However, because of the natural intimate interactions between higher eukaryotes and microbes and the effect of these on phenotype, it is our vision that a faster, more tractable route to the engineering animal and plant phenotypes is via engineering their microbiomes.     

Agrobacterium-mediated plant transformation: the biology behind the "gene-jockeying" tool.

Agrobacterium tumefaciens and related Agrobacterium species have been known as plant pathogens since the beginning of the 20th century. However, only in the past two decades has the ability of Agrobacterium to transfer DNA to plant cells been harnessed for the purposes of plant genetic engineering. Since the initial reports in the early 1980s using Agrobacterium to generate transgenic plants, scientists have attempted to improve this "natural genetic engineer" for biotechnology purposes. Some of these modifications have resulted in extending the host range of the bacterium to economically important crop species. However, in most instances, major improvements involved alterations in plant tissue culture transformation and regeneration conditions rather than manipulation of bacterial or host genes. Agrobacterium-mediated plant transformation is a highly complex and evolved process involving genetic determinants of both the bacterium and the host plant cell. In this article, I review some of the basic biology concerned with Agrobacterium-mediated genetic transformation. Knowledge of fundamental biological principles embracing both the host and the pathogen have been and will continue to be key to extending the utility of Agrobacterium for genetic engineering purposes.     

Molecular characterization and expression analysis of the <Emphasis Type="Italic">SPL</Emphasis> gene family with <Emphasis Type="Italic">BpSPL9</Emphasis> transgenic lines found to confer tolerance to abiotic stress in <Emphasis Type="Italic">Betula platyphylla</Emphasis> Suk.

Christolea crassifolia HARDY: gene (CcHRD) belongs to the AP2/ERF-like tanscritpion factor family, and overexpression of HRD gene has been proved to result in improved water use efficiency and enhanced drought resistance in multiple plant species. In the present study, we cloned the CcHRD gene from Christolea crassifolia, which shares 99.1% sequence similarity with the HRD gene from Arabidopsis thaliana. We generated transgenic tomato plants expressing CcHRD gene by agrobacterium-mediated genetic transformation. Our results revealed that the transgenic tomato plants showed a more developed root system and higher fruit yield than the wild-type plants. Furthermore, the leaf relative water content, chlorophyll content and Fv/Fm value in transgenic plants were significantly higher than the wild type, while the relative conductivity and MDA content of transgenic plant leaves were markedly lower than those of wild type under drought stress. We also observed that the major agronomic traits of transgenic tomato plants were improved under natural drought stress compared with those of the wild type. In summary, results in this transgenic study showed that the CcHRD gene could enhance the drought resistance in tomato, and also provided important information for the application of drought-responsive genes in improving crop plant resistance to abiotic stresses.     

In vivo biosensors: mechanisms,development, and applications

In vivo biosensors can recognize and respond to specific cellular stimuli. In recent years, biosensors have been increasingly used in metabolic engineering and synthetic biology, because they can be implemented in synthetic circuits to control the expression of reporter genes in response to specific cellular stimuli, such as a certain metabolite or a change in pH. There are many types of natural sensing devices, which can be generally divided into two main categories: protein-based and nucleic acid-based. Both can be obtained either by directly mining from natural genetic components or by engineering the existing genetic components for novel specificity or improved characteristics. A wide range of new technologies have enabled rapid engineering and discovery of new biosensors, which are paving the way for a new era of biotechnological progress. Here, we review recent advances in the design, optimization, and applications of in vivo biosensors in the field of metabolic engineering and synthetic biology.     

转大麻哈鱼生长激素基因鲤生态安全性检测与分析

评价了转大麻哈鱼（Oncorhynchus Suckley）生长激素基因鲤生态安全性问题及研究转基因鱼对天然野生鲤群体遗传污染程度。通过RAPD和SSLP方法,用265个RAPD标记和35对鲤的微卫星标记对受杂交鲤污染的哈尔滨江段黑龙江鲤群体、未受污染的抚远江段黑龙江鲤群体及模拟转基因鲤占普通鲤群体的1%和10%比例获得繁殖子代等实验群体的DNA样本进行全基因组扫描统计分析得出结论,即转基因鲤占普通鲤群体1%时对普通群体的基因污染程度是微乎其微的,远远低于杂交鲤对野生群体基因污染,转基因鲤占普通鲤群体10%时对普通鲤遗传背景的影响稍有升高,但仍然远远低于杂交鲤对野生群体基因污染程度。总之,在现有的检测技术条件及有效的监控条件下,与杂交鲤相比转基因鲤对鲤野生群体的遗传背景的影响是微弱的,而外来种和杂交种则对生态环境有严重威胁。     

The ecological risks of transgenic plants.

Biotechnologies have been utilized "ante litteram" for thousands of years to produce food and drink and genetic engineering techniques have been widely applied to produce many compounds for human use, from insulin to other medicines. The debate on genetically modified (GM) organisms broke out all over the world only when GM crops were released into the field. Plant ecologists, microbiologists and population geneticists carried out experiments aimed at evaluating the environmental impact of GM crops. The most significant findings concern: the spread of transgenes through GM pollen diffusion and its environmental impact after hybridisation with closely related wild species or subspecies; horizontal gene transfer from transgenic plants to soil microbes; the impact of insecticide proteins released into the soil by transformed plants on non-target microbial soil communities. Recent developments in genetic engineering produced a technology, dubbed "Terminator", which protects patented genes introduced in transgenic plants by killing the seeds in the second generation. This genetic construct, which interferes so heavily with fundamental life processes, is considered dangerous and should be ex-ante evaluated taking into account the data on "unexpected events", as here discussed, instead of relying on the "safe until proven otherwise" claim. Awareness that scientists, biotechnologists and genetic engineers cannot answer the fundamental question "how likely is that transgenes will be transferred from cultivated plants into the natural environment?" should foster long-term studies on the ecological risks and benefits of transgenic crops.     

Integrative biological analysis of the APOE*3-leiden transgenic mouse

Integrative (or systems biology) is a new approach to analyzing biological entities as integrated systems of genetic, genomic, protein, metabolite, cellular, and pathway events that are in flux and interdependent. Here, we demonstrate the application of intregrative biological analysis to a mammalian disease model, the apolipoprotein E3-Leiden (APO*E3) transgenic mouse. Mice selected for the study were fed a normal chow diet and sacrificed at 9 weeks of age-conditions under which they develop only mild type I and II atherosclerotic lesions. Hepatic mRNA expression analysis showed a 25% decrease in APO A1 and a 43% increase in liver fatty acid binding protein expression between transgenic and wild type control mice, while there was no change in PPAR-alpha expression. On-line high performance liquid chromatography-mass spectrometry quantitative profiling of tryptic digests of soluble liver proteins and liver lipids, coupled with principle component analysis, enabled rapid identification of early protein and metabolite markers of disease pathology. These included a 44% increase in L-FABP in transgenic animals compared to controls, as well as an increase in triglycerides and select bioactive lysophosphatidylcholine species. A correlation analysis of identified genes, proteins, and lipids was used to construct an interaction network. Taken together, these results indicate that integrative biology is a powerful tool for rapid identification of early markers and key components of pathophysiologic processes, and constitute the first application of this approach to a mammalian system.     

Transgenic, transplastomic and transient approaches for foreign gene expression in plants

The review represents the latest results of the experiments carried out at the Department of genetic engineering of the Institute of cell biology and genetic engineering of the National Academy of Sciences of Ukraine in the field of creation oftransgenic and transplastomic plants as well as the use of transient expression for production of recombinant proteins. The new approaches of promoterless gene expression in transgenic plants and construction of transplastomic plants using "clipboard" species are discussed.     

合成生物学及其在生物技术中的应用进展

合成生物学是一门21世纪生物学的新兴学科,它着眼生物科学与工程科学的结合,把生物系统当作工程系统"从下往上"进行处理,由"单元"(unit)到"部件"(device)再到"系统"(system)来设计,修改和组装细胞构件及生物系统.合成生物学是分子和细胞生物学、进化系统学、生物化学、信息学、数学、计算机和工程等多学科交叉的产物.目前研究应用包括两个主要方面:一是通过对现有的、天然存在的生物系统进行重新设计和改造,修改已存在的生物系统,使该系统增添新的功能.二是通过设计和构建新的生物零件、组件和系统,创造自然界中尚不存在的人工生命系统.合成生物学作为一门建立在基因组方法之上的学科,主要强调对创造人工生命形态的计算生物学与实验生物学的协同整合.必须强调的是,用来构建生命系统新结构、产生新功能所使用的组件单元既可以是基因、核酸等生物组件,也可以是化学的、机械的和物理的元件.本文跟踪合成生物学研究及应用,对其在DNA水平编程、分子修饰、代谢途径、调控网络和工业生物技术等方面的进展进行综述.     

Breeding of the Russian sable: Stages of industrial domestication and genetic variability

Creating farms for sable breeding was associated with the commercial destruction of natural populations and, consequently, the overall decline in the species number. The gene pool of the first farm-bred sable population in Russia, established in the vicinity of Moscow (“Pushkinskiy” fur farm), was formed by crossing of animals removed from nine natural populations. In the first eight years of farm operation, approximately one thousand animals were used for sable breeding; some of these animals were able to adapt to the farm management and, subsequently, to the selection for a number of quantitative traits in the period of industrial domestication. It took about ten years for breeders to work out the breeding and selection technologies, which became successfully employed in the established affiliated sable breeding farms. The main achievement in sable breeding over the 85-year historical period of breeding in Russia is the creation of two unique breeds, black sable (1969) and Saltykovskaya 1 (2007). In general, industrial domestication in fur farming and the subsequent breeding works made the fur of many species (mink, fox, Arctic fox) obtained from natural populations uncompetitive, which undoubtedly reduced the hunting interest in the animals living in the wild. Consequently, hunting for fur-bearing animals of most species decreased and has only local importance. Owing to the specific features of sable biology, the fur of farm-bred animals cannot yet completely replace the furs obtained by hunting; however, the farm-bred sable population is constantly growing. This review presents the results of the analysis of the level of genetic variability in natural and farm populations at nuclear and mitochondrial loci. The comparative analysis makes it possible to estimate the loss of genetic diversity upon the species adaptation to the new conditions of existence.     

A perspective of synthetic biology: assembling building blocks for novel functions

Synthetic biology is a recently emerging field that applies engineering formalisms to design and construct new biological parts, devices, and systems for novel functions or life forms that do not exist in nature. Synthetic biology relies on and shares tools from genetic engineering, bioengineering, systems biology and many other engineering disciplines. It is also different from these subjects, in both insights and approach. Applications of synthetic biology have great potential for novel contributions to established fields and for offering opportunities to answer fundamentally new biological questions. This article does not aim at a thorough survey of the literature and detailing progress in all different directions. Instead, it is intended to communicate a way of thinking for synthetic biology in which basic functional elements are defined and assembled into living systems or biomaterials with new properties and behaviors. Four major application areas with a common theme are discussed and a procedure (or "protocol") for a standard synthetic biology work is suggested.     

Inherited differences in crossing over and gene conversion frequencies between wild strains of Sordaria fimicola from "Evolution Canyon".

Recombination generates new combinations of existing genetic variation and therefore may be important in adaptation and evolution. We investigated whether there was natural genetic variation for recombination frequencies and whether any such variation was environment related and possibly adaptive. Crossing over and gene conversion frequencies often differed significantly in a consistent direction between wild strains of the fungus Sordaria fimicola isolated from a harsher or a milder microscale environment in "Evolution Canyon," Israel. First- and second-generation descendants from selfing the original strains from the harsher, more variable, south-facing slope had higher frequencies of crossing over in locus-centromere intervals and of gene conversion than those from the lusher north-facing slopes. There were some significant differences between strains within slopes, but these were less marked than between slopes. Such inherited variation could provide a basis for natural selection for optimum recombination frequencies in each environment. There were no significant differences in meiotic hybrid DNA correction frequencies between strains from the different slopes. The conversion analysis was made using only conversions to wild type, because estimations of conversion to mutant were affected by a high frequency of spontaneous mutation. There was no polarized segregation of chromosomes at meiosis I or of chromatids at meiosis II.     

Evidence for an invasive aphid "superclone": extremely low genetic diversity in Oleander aphid (Aphis nerii) populations in the southern United States

Background

The importance of genetic diversity in successful biological invasions is unclear. In animals, but not necessarily plants, increased genetic diversity is generally associated with successful colonization and establishment of novel habitats. The Oleander aphid, Aphis nerii, though native to the Mediterranean region, is an invasive pest species throughout much of the world. Feeding primarily on Oleander (Nerium oleander) and Milkweed (Asclepias spp.) under natural conditions, these plants are unlikely to support aphid populations year round in the southern US. The objective of this study was to describe the genetic variation within and among US populations of A. nerii, during extinction/recolonization events, to better understand the population ecology of this invasive species.

Methodology/Principal Findings

We used five microsatellite markers to assess genetic diversity over a two year period within and among three aphid populations separated by small (100 km) and large (3,700 km) geographic distances on two host plant species. Here we provide evidence for A. nerii “superclones”. Genotypic variation was absent in all populations (i.e., each population consisted of a single multilocus genotype (MLG) or “clone”) and the genetic composition of only one population completely changed across years. There was no evidence of sexual reproduction or host races on different plant species.

Conclusions/Significance

Aphis nerii is a well established invasive species despite having extremely low genetic diversity. As this aphid appears to be obligatorily asexual, it may share more similarities with clonally reproducing invasive plants, than with other animals. Patterns of temporal and geographic genetic variation, viewed in the context of its population dynamics, have important implications for the management of invasive pests and the evolutionary biology of asexual species.     

Engineering and control of biological systems: A new way to tackle complex diseases

The ongoing merge between engineering and biology has contributed to the emerging field of synthetic biology. The defining features of this new discipline are abstraction and standardisation of biological parts, decoupling between parts to prevent undesired cross-talking, and the application of quantitative modelling of synthetic genetic circuits in order to guide their design. Most of the efforts in the field of synthetic biology in the last decade have been devoted to the design and development of functional gene circuits in prokaryotes and unicellular eukaryotes. Researchers have used synthetic biology not only to engineer new functions in the cell, but also to build simpler models of endogenous gene regulatory networks to gain knowledge of the "rules" governing their wiring diagram. However, the need for innovative approaches to study and modify complex signalling and regulatory networks in mammalian cells and multicellular organisms has prompted advances of synthetic biology also in these species, thus contributing to develop innovative ways to tackle human diseases. In this work, we will review the latest progress in synthetic biology and the most significant developments achieved so far, both in unicellular and multicellular organisms, with emphasis on human health.     

天然产物类药物的合成生物学研究

结构复杂多样的天然产物是现代药物的重要组成部分和新药发现的重要源泉。建立在基因工程及代谢工程、合成化学、基因组学、系统生物学等学科基础上的合成生物学研究对于结构复杂的天然产物类药物研究有特殊的意义。核心是通过在发酵友好、高效的微生物中设计、构建目标化合物的生物合成途径,经系统地调控和优化由重组微生物发酵生产来源稀缺的天然产物类药物或前体。该方法是不远的将来解决来源、成本与环境、资源协调问题最好的途径之一,也是解决海洋天然产物或特殊生境微生物药物面临的如何持续供应化合物这一个瓶颈问题的最佳选择。该文将对天然产物类药物合成生物学研究涉及的主要策略和重要进展进行阐述。     

Opportunities for yeast metabolic engineering: Lessons from synthetic biology

Constant progress in genetic engineering has given rise to a number of promising areas of research that facilitated the expansion of industrial biotechnology. The field of metabolic engineering, which utilizes genetic tools to manipulate microbial metabolism to enhance the production of compounds of interest, has had a particularly strong impact by providing new platforms for chemical production. Recent developments in synthetic biology promise to expand the metabolic engineering toolbox further by creating novel biological components for pathway design. The present review addresses some of the recent advances in synthetic biology and how these have the potential to affect metabolic engineering in the yeast Saccharomyces cerevisiae. While S. cerevisiae for years has been a robust industrial organism and the target of multiple metabolic engineering trials, its potential for synthetic biology has remained relatively unexplored and further research in this field could strongly contribute to industrial biotechnology. This review also addresses are general considerations for pathway design, ranging from individual components to regulatory systems, overall pathway considerations and whole-organism engineering, with an emphasis on potential contributions of synthetic biology to these areas. Some examples of applications for yeast synthetic biology and metabolic engineering are also discussed.     

Basic science through engineering? Synthetic modeling and the idea of biology-inspired engineering

Synthetic biology is often understood in terms of the pursuit for well-characterized biological parts to create synthetic wholes. Accordingly, it has typically been conceived of as an engineering dominated and application oriented field. We argue that the relationship of synthetic biology to engineering is far more nuanced than that and involves a sophisticated epistemic dimension, as shown by the recent practice of synthetic modeling. Synthetic models are engineered genetic networks that are implanted in a natural cell environment. Their construction is typically combined with experiments on model organisms as well as mathematical modeling and simulation. What is especially interesting about this combinational modeling practice is that, apart from greater integration between these different epistemic activities, it has also led to the questioning of some central assumptions and notions on which synthetic biology is based. As a result synthetic biology is in the process of becoming more “biology inspired.”     

合成生物学技术在环境保护中的应用

合成生物学是一个基于生物学和工程学原理的科学领域,其目的是重新设计和重组微生物,以优化或创建具有增强功能的新生物系统。该领域利用分子工具、系统生物学和遗传框架的重编程,从而构建合成途径以获得具有替代功能的微生物。传统上,合成生物学方法通常旨在开发具有成本效益的微生物细胞工厂进而从可再生资源中生产化学物质。然而,近年来合成生物学技术开始在环境保护中发挥着更直接的作用。本综述介绍了基因工程中的合成生物学工具,讨论了基于基因工程的微生物修复策略,强调了合成生物学技术可以通过响应特定污染物进行生物修复来保护环境。其中,规律间隔成簇短回文重复序列(Clustered Regularly Interspersed Short Palindromic Repeats, CRISPR)技术在基因工程细菌和古细菌的生物修复中得到了广泛应用,生物修复领域也出现了很多新的先进技术,包括生物膜工程、人工微生物群落的构建、基因驱动、酶和蛋白质工程等。有了这些新的技术和工具,生物修复将成为当今最好和最有效的污染物去除方式之一。     

The farther, the safer: a manifesto for securely navigating synthetic species away from the old living world

Biotechnology has empirically established that it is easier to construct and evaluate variant genes and proteins than to account for the emergence and function of wild-type macromolecules. Systematizing this constructive approach, synthetic biology now promises to infer and assemble entirely novel genomes, cells and ecosystems. It is argued here that the theoretical and computational tools needed for this endeavor are missing altogether. However, such tools may not be required for diversifying organisms at the basic level of their chemical constitution by adding, substituting or removing elements and molecular components through directed evolution under selection. Most importantly, chemical diversification of life forms could be designed to block metabolic cross-feed and genetic cross-talk between synthetic and wild species and hence protect natural habitats and human health through novel types of containment.     

Estimating genetic parameters in natural populations using the "animal model"

Estimating the genetic basis of quantitative traits can be tricky for wild populations in natural environments, as environmental variation frequently obscures the underlying evolutionary patterns. I review the recent application of restricted maximum-likelihood "animal models" to multigenerational data from natural populations, and show how the estimation of variance components and prediction of breeding values using these methods offer a powerful means of tackling the potentially confounding effects of environmental variation, as well as generating a wealth of new areas of investigation.