Production of a biosurfactant exhibiting excellent emulsification and surface active properties bySerratia marcescens

A biosurfactant exhibiting excellent emulsification activity and surface properties was isolated during growth ofSerratia marcescens on 2% (w/v) sucrose. Reduction in surface tension values and increase in the yield of biosurfactant during the late log phase of growth indicates that the biosurfactant is a secondary microbial metabolite. The biosurfactant formed stable emulsions with a wide variety of hydrocarbons. The isolated surface-active compound has a potential application in enhanced oil recovery and is stable over a wide range of temperatures (10-120‡C) and pH (2-12). This is the first report of effective and stable emulsion formation by a strain ofSerratia marcescens.     

Isolation and characterization of a biosurfactant from Deinococcus caeni PO5 using jackfruit seed powder as a substrate

Biosurfactant-producing bacteria were isolated from various sources in the south of Thailand. Isolates were screened for biosurfactant production using jackfruit seed powder (JSP) as a novel and promising substrate. The highest biosurfactant activity was obtained with a bacterial strain which was identified by 16S rRNA gene sequence analysis as Deinococcus caeni PO5. D. caeni PO5 was able to grow and reduce the surface tension of the culture supernatant from 67.0 to 25.0 mN/m after 87 h of cultivation when 40 g/l of JSP and 1 g/l of commercial monosodium glutamate were used as carbon and nitrogen sources, respectively. The biosurfactant obtained by ethyl acetate extraction showed high surface tension reduction (47.0 mN/m), a small critical micelle concentration value (8 mg/l), thermal and pH stability with respect to surface tension reduction and emulsification activity, and a high level of salt tolerance. Chemical characterization by biochemical testing, Fourier transform infrared spectroscopy, and mass spectra revealed that the obtained biosurfactant was a glycolipid-type biosurfactant. The obtained biosurfactant was capable of forming stable emulsions with various hydrocarbons and had the ability to enhance oil recovery, the solubility of polyaromatic hydrocarbons, heavy metal removal, and antimicrobial activity.     

Utilization of palm oil decanter cake as a novel substrate for biosurfactant production from a new and promising strain of Ochrobactrum anthropi 2/3

A biosurfactant-producing bacterium, isolate 2/3, was isolated from mangrove sediment in the south of Thailand. It was evaluated as a potential biosurfactant producer. The highest biosurfactant production (4.52 g/l) was obtained when the cells were grown on a minimal salt medium containing 25 % (v/v) palm oil decanter cake and 1 % (w/v) commercial monosodium glutamate as carbon and nitrogen sources, respectively. After microbial cultivation at 30 °C in an optimized medium for 96 h, the biosurfactant produced was found to reduce the surface tension of pure water to 25.0 mN/m with critical micelle concentrations of 8.0 mg/l. The stability of the biosurfactant at different salinities, pH and temperature and also its emulsifying activity was investigated. It is an effective surfactant at very low concentrations over a wide range of temperatures, pH and salt concentrations. The biosurfactant obtained was confirmed as a glycolipid type biosurfactant by using a biochemical test, fourier-transform infrared spectroscopy, MNR and mass spectrometry. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance polyaromatic hydrocarbons solubility.     

Isolation and characterization of biosurfactant production under extreme environmental conditions by alkali-halo-thermophilic bacteria from Saudi Arabia

Twenty three morphologically distinct microbial colonies were isolated from soil and sea water samples, which were collected from Jeddah region, Saudi Arabia for screening of the most potent biosurfactant strains. The isolated bacteria were selected by using different methods as drop collapse test, oil displacement test, blue agar test, blood hemolysis test, emulsification activity and surface tension. The results showed that the ability of Virgibacillus salarius to grow and reduce surface tension under a wide range of pH, salinities and temperatures gives bacteria isolate an advantage in many applications such as pharmaceutical, cosmetics, food industries and bioremediation in marine environment. The biosurfactant production by V. salarius decreased surface tension and emulsifying activity (30 mN/m and 80%, respectively). In addition to reducing the production cost of biosurfactants by tested several plant-derived oils such as jatropha oil, castor oils, jojoba oil, canola oil and cottonseed oil. In this respect the feasibility to reusing old frying oil of sunflower for production rhamnolipids and sophorolipids, their use that lead to solve many ecological and industrial problems.     

Production and characterization of biosurfactant from marine bacterium Inquilinus limosus KB3 grown on low-cost raw materials

Inquilinus limosus strain KB3, isolated from marine sediment in the south of Thailand, was used to produce a biosurfactant from a mineral salts medium (MSM) with palm oil decanter cake (PODC) as a carbon source. It was found that cellular growth and biosurfactant production in MSM were greatly affected by the medium components. I. limosus KB3 was able to grow and to produce surfactant reducing the surface tension of medium to 28.2 mN/m and giving a crude surfactant concentration of 5.13 g/l after 54 h. The biosurfactant obtained was found to reduce the surface tension of pure water to 25.5 mN/m with the critical micelle concentration of 9 mg/l, and retained its properties during exposure to elevated temperatures (121 °C), high salinity (12 % NaCl), and a wide range of pH values. Chemical characterization by FT-IR, NMR, and ESI-MS revealed that the biosurfactant has a lipopeptide composition with molecular mass (m/z) of 1,032. The biosurfactant was capable of forming stable emulsions with various hydrocarbons and had the ability to enhance oil recovery, PAHs solubility, and antimicrobial activity.     

Isolation and functional characterization of a biosurfactant produced by a new and promising strain of Oleomonas sagaranensis AT18

Biosurfactant-producing bacteria were isolated from mangrove sediment in southern Thailand. Isolates were screened for biosurfactant production by using the surface tension test. The highest reduction of surface tension was achieved with a bacterial strain which was identified by 16S rRNA gene sequencing as Oleomonas sagaranensis AT18. It has also been investigated using different carbon and nitrogen sources. It showed that the strain was able to grow and reduce the surface tension of the culture supernatant to 25?mN/m. In all 5.30?g of biosurfactant yield was obtained after 54?h of cultivation by using molasses and NaNO(3) as carbon and nitrogen sources, respectively. The biosurfactant recovery by chloroform:methanol extraction showed a small critical micelle concentration value (8?mg/l), thermal and pH stability with respect to surface tension reduction. It also showed emulsification activity and a high level of salt concentration. The biosurfactant obtained was confirmed as a glycolipid by using a biochemical test, FT-IR and mass spectra. The crude biosurfactant showed a broad spectrum of antimicrobial activity and also had the ability to emulsify oil and enhance PAHs solubility.     

Production of biosurfactant at mesophilic and thermophilic conditions by a strain of Bacillus subtilis

The ability of a Bacillus subtilis strain to grow and produce biosurfactant on different carbon and nitrogen sources under thermophilic conditions (45°C) was studied. The strain was able to reduce surface tension to 34 dynes cm⁻¹ on 2% sucrose, and 32 dynes cm⁻¹ on starch after 96 h of growth. The biosurfactant was stable at 100°C and within a wide pH range (3.0–11.0). Biosurfactant formation at mesophilic conditions (30°C) was also studied. The organism was able to produce the maximum amount of biosurfactant when nitrate ions were supplied as the nitrogen source. The potential application of the biosurfactant in oil recovery from desert oil fields, acidic and alkaline environments is demonstrated. The biosurfactant was identical to surfactin as confirmed by TLC and IR analysis. Received 29 May 1997/ Accepted in revised form 03 October 1997     

Isolation and characterization of a biosurfactant producing strain, <Emphasis Type="Italic">Brevibacilis brevis</Emphasis> HOB1

Biosurfactant-producing bacteria were isolated from the production water of an oil field. Isolates were screened for biosurfactant production using surface tension test. The highest reduction of surface tension was achieved with a bacterial strain which was identified by 16S rRNA gene sequencing as Brevibacilis brevis HOB1. It has been investigated using different carbon and nitrogen sources. It showed that the strain was able to grow and reduce the surface tension of the broth to 29 mN/m on commercial sugar and maltose, and to 32 mN/m on glucose after 72 h of growth. The maximum amount of biosurfactant was obtained when nitrate ions were supplied as nitrogen source. Biosurfactant produced by Brevibacilis brevis HOB1 was confirmed as a lipopeptide class of biosurfactant using TLC test and mass spectra. Lipopeptide isoforms were isolated from cell-free supernatants by acid-precipitation followed by one step of chromatographic separation on solid-phase ODS C18 column. The separation was confirmed by HPLC and ESI Q-TOF MS spectroscopy. Comparing the mass data obtained and the mass numbers reported for the lipopeptide complexes from other strains, it can be concluded that the major lipopeptide product of Brevibacilis brevis HOB1 is the surfactin isoform. This lipopeptide showed strong antibacterial and antifungal activity. It is a candidate for the biocontrol of pathogens in agriculture and other industries.     

Enhancement of stability of biosurfactant produced by <Emphasis Type="Italic">Candida lipolytica</Emphasis> using industrial residue as substrate

This work describes experimental results carried out on the fermentation of Candida lipolytica, which produced a new biosurfactant when grown on a vegetable oil refinery residue as substrate. The cell-free culture broth containing the biosurfactant formed stable emulsions with hydrophobic natural compounds. Emulsification properties of the biosurfactant were not affected by salinity; however, treatment at a higher temperature decreased the emulsification activity, indicating applications in oil recovery. The isolated biosurfactant corresponds to a yield of 4.5 g/l, and the surface tension of water was reduced from 71 to 32 mN/m. Preliminary chemical characterizations showed that the biosurfactant consisted of protein (50%), lipid (20%), and carbohydrate (8%).     

Distillery and curd whey wastes as viable alternative sources for biosurfactant production

Biosurfactant production from synthetic medium and industrial waste, viz. distillery and whey wastes was investigated by using an oily sludge isolate Pseudomonas aeruginosa strain BS2. In synthetic medium separately supplemented with glucose and hexadecane as water-soluble and -insoluble carbon sources, respectively, strain BS2 reduced the surface tension of the fermentation broth from 57 to 27 mN/m. The culture produced biosurfactant during the stationary growth phase and its yield was 0.97 g/l. The culture utilized distillery and whey wastes for its growth, as maximum cell counts reached to 54 × 10⁸ and 64 × 10⁹ c.f.u./ml from an initial inoculum size of 1 × 0⁵ c.f.u./ml, respectively, within 48 h of incubation and in these wastes the yields of biosurfactant obtained were 0.91 and 0.92 g/l, respectively. In synthetic medium, distillery and whey wastes, strain BS2 produced a crystalline biosurfactant which belonged to the category of secondary metabolites and its maximum production occurred after the onset of nitrogen-limiting conditions. After recovering biosurfactant from the fermented waste, the chemical oxygen demand (COD) of distillery and whey wastes was significantly reduced by 81 and 87%, respectively. Total acids, nitrogen and phosphate levels in distillery waste were reduced by 90, 92 and 92%, respectively, while in case of whey waste the concentration of these nutrients was reduced by 88, 95 and 93%, respectively. The isolated biosurfactant possessed potent surface active properties, as it effectively reduced the surface tension of water from 72 to 27 mN/m and formed 100% stable emulsions of a variety of water-insoluble compounds such as hydrocarbons, viz. hexadecane, crude oil, kerosene and oily sludge and pesticides, viz. dichlorodiphenyltrichloroethane (DDT) and benzene hexachloride (BHC). The effectiveness of biosurfactant was also evident from its low critical micellar concentration (CMC) which was 0.028 mg/ml.     

The isolation of a thermophilic biosurfactant producing Bacillus SP

Summary A thermophilic Bacillus strain has been isolated on a hydrocarbon containing medium and grew at up to 50°C. This strain produced biosurfactant and its 20h old culture broth had low surface and interfacial tension (27–29 and 1.5 mN/m, respectively). It emulsified Kerosene and other hydrocarbons efficiently (E–24 = 95 %) and was able to recover more than 95 % of the residual oil from sandpack columns. Potential uses in oil industries are discussed.     

Production of biosurfactant and antifungal compound by fermented food isolate Bacillus subtilis 20B

A biosurfactant producing strain, Bacillus subtilis 20B, was isolated from fermented food in India. The strain also showed inhibition of various fungi in in-vitro experiments on Potato Dextrose Agar medium. It was capable of growth at temperature 55 degrees C and salts up to 7%. It utilized different sugars, alcohols, hydrocarbons and oil as a carbon source, with preference for sugars. In glucose based minimal medium it produced biosurfactant which reduced surface tension to 29.5 mN/m, interfacial tension to 4.5 mN/m and gave stable emulsion with crude oil and n-hexadecane. The biosurfactant activity was stable at high temperature, a wide range of pH and salt concentrations for five days. Oil displacement experiments using biosurfactant containing broth in sand pack columns with crude oil showed 30.22% recovery. The possible application of organism as biocontrol agent and use of biosurfactant in microbial enhanced oil recovery (MEOR) is discussed.     

生物表面活性剂生产菌的鉴定及其发酵优化和产物性质研究

由中国科学院南海海洋研究所提供的一株生物表面活性剂生产菌,经菌落、菌体形态和16S rDNA序列分析,鉴定为芽孢杆菌属,命名为Bacillus SCUT09.初步优化了该菌株的培养条件,最佳碳、氮源分别为木薯淀粉、牛肉膏,最利于Bacillus SCUT09生长和生物表面活性剂积累的条件为:NaCl 1%,pH 6.5...     

Laboratory production and characterization of a new biosurfactant from <Emphasis Type="Italic">Candida glabrata</Emphasis> UCP1002 cultivated in vegetable fat waste applied to the removal of hydrophobic contaminant

Biosurfactant production by Candida glabrata was studied using vegetable fat waste as substrate. A factorial design was initially carried out to investigate the effects and interactions of waste, yeast extract and glucose on the surface tension after 144 h cultivation. Maximum surface tension reduction was achieved with vegetable fat waste at 5% and yeast extract at 0.2%. The biosurfactant containing cell-free broth retained its surface-active properties after incubation at high temperatures, at a wide range of pH values and salt concentrations. Comparison between three solvent systems for surfactant recovery showed that ethyl acetate extracted both crude extracellular and intracellular biosurfactant with high product recovery. The isolated extracellular biosurfactant showed a CMC of 1% and the surface tension at that point was 24 mN m⁻¹. Preliminary chemical composition revealed the presence of carbohydrates, proteins and lipids. The application of the crude biosurfactant to a soil–water-hydrophobic contaminant system was investigated and the apparent critical micelle concentration was determined at 7% of the broth, although the best oil removal (92.6%) had been obtained with 10% of the cell-free broth. The cost of application of the biosurfactant in soils was estimated based on the cost of a commercial biosurfactant.     

Isolation of biosurfactant producers, optimization and properties of biosurfactant produced by Acinetobacter sp. from petroleum-contaminated soil

Aims: To screen and identify biosurfactant producers from petroleum‐contaminated soil; to use response surface methodology (RSM) for medium optimization to enhance biosurfactant production; and to study the properties of the newly obtained biosurfactant towards pH, temperature and salinity. Methods and Results: We successfully isolated three biosurfactant producers from petroleum‐contaminated soil and identified them through 16S rRNA sequence analysis, which exhibit the highest similarities to Acinetobacter beijerinckii (100%), Kocuria marina (99%) and Kineococcus marinus (99%), respectively. A quadratic response model was constructed through RSM designs, leading to a 57·5% increase of the growth‐associated biosurfactant production by Acinetobacter sp. YC‐X 2 with an optimized medium: beef extract 3·12 g l^?1; peptone 20·87 g l^?1; NaCl 1·04 g l^?1; and n‐hexadecane 1·86 g l^?1. Biosurfactant produced by Acinetobacter sp. YC‐X 2 retained its properties during exposure to a wide range of pH values (5–11), high temperatures (up to 121°C) and high salinities [up to 18% (w/v) Na⁺ and Ca²⁺], which was more sensitive to Ca²⁺ than Na⁺. Conclusions: Two novel biosurfactant producers were isolated from petroleum‐contaminated soil. Biosurfactant from Acinetobacter sp. YC‐X 2 has good properties to a wide range of pH, high temperature and high salinity, and its production was optimized successfully through RSM. Significance and Impact of the Study: The fact, an increasing demand of high‐quality surfactants and the lack of cost‐competitive bioprocesses of biosurfactants for commercial utilization, motivates researchers to develop cost‐effective strategies for biosurfactant production through isolating new biosurfactant producers with special surface‐active properties and optimizing their cultural conditions. Two novel biosurfactant producers in this study will widen our knowledge about this kind of micro‐organism. This work is the first application of RSM designs for cultural optimization of biosurfactant produced by Acinetobacter genus and the first report that biosurfactant may be more sensitive to Ca²⁺ than Na⁺.     

Comparison of methods to detect biosurfactant production by diverse microorganisms

Three methods to detect biosurfactant production, drop collapse, oil spreading, and blood agar lysis, were compared for their ease of use and reliability in relation to the ability of the cultures to reduce surface tension. The three methods were used to test for biosurfactant production in 205 environmental strains with different phylogenetic affiliations. Surface tension of select strains that gave conflicting results with the above three methods was also measured. Sixteen percent of the strains that lysed blood agar tested negative for biosurfactant production with the other two methods and had little reduction in surface tension (values above 60 mN/m). Thirty eight percent of the strains that did not lyse blood agar tested positive for biosurfactant production with the other two methods and had surface tension values as low as 35 mN/m. There was a very strong, negative, linear correlation between the diameter of clear zone obtained with the oil spreading technique and surface tension (rs = -0.959) and a weaker negative correlation between drop collapse method and surface tension (rs = -0.82), suggesting that the oil spreading technique better predicted biosurfactant production than the drop collapse method. The use of the drop collapse method as a primary method to detect biosurfactant producers, followed by the determination of the biosurfactant concentration using the oil spreading technique, constitutes a quick and easy protocol to screen and quantify biosurfactant production. The large number of false negatives and positives obtained with the blood agar lysis method and its poor correlation to surface tension (rs = -0.15) demonstrated that it is not a reliable method to detect biosurfactant production.     

Optimization,production and characterization of glycolipid biosurfactant from the marine actinobacterium,Streptomyces sp. MAB36

A potential glycolipid biosurfactant producer Streptomyces sp. MAB36 was isolated from marine sediment samples. Medium composition and culture conditions for the glycolipid biosurfactant production by Streptomyces sp. MAB36 were optimized, using two statistical methods: Plackett–Burman design was applied to find out the key ingredients and conditions for the best yield of glycolipid biosurfactant production and central composite design was used to optimize the concentration of the four significant variables, starch, casein, crude oil and incubation time. Fructose and yeast extract were the best carbon and nitrogen sources for the production of the glycolipid biosurfactant. Biochemical characterizations including FTIR and MS studies suggested the glycolipid nature of the biosurfactant. The isolated glycolipid biosurfactant reduced the surface tension of water from 73.2 to 32.4 mN/m. The purified glycolipid biosurfactant showed critical micelle concentrations of 36 mg/l. The glycolipid biosurfactant was effective at very low concentrations over a wide range of temperature, pH, and NaCl concentration. The purified glycolipid biosurfactant showed strong antimicrobial activity. Thus, the strain Streptomyces sp. MAB36 has proved to be a potential source of glycolipid biosurfactant that could be used for the bioremediation processes in the marine environment.     

Characterization of a biosurfactant, mannosylerythritol lipid produced from Candida sp. SY16

One yeast strain, SY16, was selected as a potential producer of a biosurfactant, and identified as a Candida species. A biosurfactant produced from Candida sp. SY16 was purified and confirmed to be a glycolipid. This glycolipid-type biosurfactant lowered the surface tension of water to 29 dyne/cm at critical micelle concentration of 10 mg/l (1.5 × 10⁻⁵ M), and the minimum interfacial tension was 0.1 dyne/cm against kerosene. Thin-layer and high-pressure liquid chromatography studies demonstrated that the glycolipid contained mannosylerythritol as a hydrophilic moiety. The hydrophilic sugar moiety of the biosurfactant was determined to be β-d-mannopyranosyl-(1 → 4)-O-meso-erythritol by nuclear magnetic resonance (NMR) and fast atom bombardment mass–spectroscopy analyses. The hydrophobic moiety, fatty acids, of the biosurfactant was determined to be hexanoic, dodecanoic, tetradecanoic, and tetradecenoic acid by gas chromatography–mass spectroscopy. The structure of the native biosurfactant was determined to be 6-O-acetyl-2,3- di-O-alkanoyl-β-d-mannopyranosyl-(1 → 4)-O-meso-erythritol by NMR analyses. We newly determined that an acetyl group was linked to the C-6 position of the d-mannose unit in the hydrophilic sugar moiety. Received: 18 December 1999 / Received last revision: 2 June 1999 / Accepted: 4 June 1999     

Serratia sp. SVGG16: a promising biosurfactant producer isolated from tropical soil during growth with ethanol-blended gasoline

The strain SVGG16 isolated from tropical soil in Brazil and identified as Serratia sp. was selected as a promising biosurfactant producer using atypic growth conditions including ethanol-blended gasoline as the sole carbon source. Important parameters for biosurfactant production were selected through experimental design. Results demonstrated that this strain was able to reduce surface tension of the medium to 34 mN m⁻¹, showing potential to be used in bioremediation processes.     

Physicochemical and structural characterization of biosurfactant produced by <Emphasis Type="Italic">Pleurotus djamor</Emphasis> in solid-state fermentation

Biosurfactants are amphiphilic compounds produced by several microorganisms that reduce the surface tension. Low toxicity, optimal activity in extreme conditions, biodegradability and production from several wastes are main advantages of biosurfactants as compared to synthetic surfactants. Production of biosurfactant by a white rot fungus Pleurotus djamor on sunflower seed shell in solid-state fermentation was determined by emulsification indexes, oil spreading activity and surface tension (28.82 ± 0.3mN/m) measurement. The critical micelle concentration was detected as 0.964 ± 0.09 mg/mL. Also, the chemical and physicochemical properties of the biosurfactant produced were investigated. Considering the results of the chemical contents analysis, HPLC, FT-IR and ¹H-NMR, it can be concluded that the produced biosurfactant has a complex structure. Besides, resistance of its activity to environmental factors such as temperature, pH and salt concentration, as well as its thermal stability, were investigated. Additionally, the produced biosurfactant formed stabile emulsions with different hydrocarbons. Lastly, the performance of removing waste frying oil from contaminated sand of produced biosurfactant was detected as 76.57 ± 6%. Owing to its high emulsification capacity, low surface tension and critical micelle concentration, the biosurfactant, shows great potential for use in hydrocarbon removal applications.