Production and Properties of Alkaline Lipase from Alcaligenes sp. Strain No. 679

For the production of extracellular lipase by Alcaligenes species No. 679, NaNO₃, polyoxyethylene alkyl ether, Fe⁺⁺, sodium citrate and fructose were found to be effective. The enzyme was prepared by acetone precipitation from the filtrate of the culture broth of this strain. The enzyme was most active at pH 9.0 and 50°C, while 35% of its activity was lost on heat treatment at 60°C for 10 min. Sodium salts of bile acids stimulated the enzyme activity. This lipase could hydrolyse natural fats and oils as well as olive oil. During the hydrolysis of olive oil, monoglyceride was found to accumulate up to 70 mol percent. This lipase possesses special properties similar to those of pancreatic lipase as shown in the comparative experiments.     

Extracellular cold-active lipase of Microbacterium luteolum isolated from Gangotri glacier,western Himalaya: Isolation,partial purification and characterization

A psychrophilic bacterium producing cold-active lipase upon growth at low temperature was isolated from the soil samples of Gangotri glacier and identified as Microbacterium luteolum. The bacterial strain produced maximum lipase at 15 °C, at a pH of 8.0. Beef extract served as the best organic nitrogen source and ammonium nitrate as inorganic for maximum lipase production. Castor oil served as an inducer and glucose served as an additional carbon source for production of cold-active lipase. Ferric chloride as additional mineral salt in the medium, highly influenced the lipase production with an activity of 8.01 U ml^?1. The cold-active lipase was purified to 35.64-fold by DEAE-cellulose column chromatography. It showed maximum activity at 5 °C and thermostability up to 35 °C. The purified lipase was stable between pH 5 and 9 and the optimal pH for enzymatic hydrolysis was 8.0. Lipase activity was stimulated in presence of all the solvents (5%) tested except with acetonitrile. Lipase activity was inhibited in presence of Mn²⁺, Cu²⁺, and Hg²⁺; whereas Fe⁺, Na⁺ did not have any inhibitory effect on the enzyme activity. The purified lipase was stable in the presence of SDS; however, EDTA and dithiothreitol inhibited enzyme activity. Presence of Ca²⁺ along with inhibitors stabilized lipase activity. The cold active lipase thus exhibiting activity and stability at a low temperature and alkaline pH appears to be practically useful in industrial applications especially in detergent formulations.     

Effect of various carbon sources on microbial lipases biosynthesis

Summary The aim of these investigations was to study the conditions for the production of extracellular lipases fromPenicillium roqueforti S-86, which was isolated from a commercial sample of roqueforti chese type. As carbon sources there have been used the following compounds: 2% glucose, fructose and sucrosel 1% and 2% butterfat and 2% olive oil. Maximal amount of lipases was produced after six days of incubation grown in the medium with 2% of glucose, initial pH of medium 4.0 at 27°C. Cells ofPenicillium roqueforti grown in the presence of bacto-peptone instead of (NH₄)₂SO₄, as nitrogen source, synthesized maximum quantity of lipases after four days of incubation.The effect of temperature, pH, as well as mono, be and three valent cations: Na⁺, K⁺, Ca⁺⁺, Mn⁺⁺, Mg⁺⁺ and Fe⁺⁺⁺ on lipase activity was followed.     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

Production and Properties of Lipase from a Newly Isolated Chromobacterium

Out of some 750 strains of microorganisms, a potent bacterium for lipase production was isolated from soil and was identified as Chromobacterium viscosum.

The bacterium accumulates lipase in culture fluid when grown aerobically at 26°C for 3 days in a medium composed of soluble starch, soy bean meal, lard and inorganic salts.

Chromobacterium lipase had an optimum pH of 7.0 for activity at 37°C, and an optimal temperature of 65°C at pH 7.0. The enzyme retained 80% of the activity when heated for 10 min at 70°C. This lipase was capable of hydrolyzing a variety of natural fats and oils, and it was more active on lard and butter than on olive oil. The activity was stimulated by Ca²⁺, Mg²⁺, Mn²⁺ and inhibited by Cu²⁺, Hg²⁺ and Sn²⁺. It was not diminished but rather stimulated by a high concentration of bile-salts.     

Purification and Characterization of Invertase from Lactobacillus reuteri CRL 1100

The invertase of Lactobacillus reuteri CRL 1100 is a glycoprotein composed by a single subunit with a molecular weight of 58 kDa. The enzyme was stable below 45°C over a wide pH range (4.5–7.0) with maximum activity at pH 6.0 and 37°C. The invertase activity was significantly inhibited by bivalent metal ions (Ca⁺⁺, Cu⁺⁺, Cd⁺⁺, and Hg⁺⁺), β-mercaptoethanol, and dithiothreitol and partially improved by ethylenediaminetetraacetic acid. The enzyme was purified 32 times over the crude extract by gel filtration and ion-exchange chromatography with a recovery of 17%. The K _m and V_max values for sucrose were 6.66 mM and 0.028 μmol/min, respectively. An invertase is purified and characterized for the first time in Lactobacillus, and it proved to be a β-fructofuranosidase. Received: 13 August 1999 / Accepted: 15 September 1999     

Purification and biochemical characterization of an organic solvent-tolerant and detergent-stable lipase from Staphylococcus capitis

A mesophilic bacterial culture, producing an extracellular alkaline lipase, was isolated from the gas-washing wastewaters generated from the Sfax phosphate plant of the Tunisian Chemical Group and identified as Staphylococcus capitis strain. The lipase, named S. capitis lipase (SCL), has been purified to homogeneity from the culture medium. The purified enzyme molecular weight was around 45 kDa. Specific activities about 3,900 and 500 U/mg were measured using tributyrin and olive oil emulsion as substrates, respectively at 37°C and pH 8.5. Interestingly, the SCL maintained more than 60% of its initial activity over a wide pH values ranging from 5 to 11 with a high stability between pH 9 and 11 after 1 hr of incubation at room temperature. The lipase activity was enhanced in the presence of 2 mM of Mg²⁺, Ca²⁺, and K⁺. SCL showed significant stability in the presence of detergents and organic solvents. Altogether, these features make the SCL useful for industrial applications. Besides, SCL was compatible with commercially available detergents, and its incorporation increases lipid degradation performances making it a potential candidate in detergent formulation.     

Studies on Metabolic Pathway of NAD in Yeast

The properties of yeast 5′-nucleotidase, one of NAD-metabolic system in yeast, were studied.

1) The enzyme has optimum pH at 5.8~6.1 for its activity and is most stable at pH 6. It is inactivated completely at 55°C for 6 min, pH 7, but never at 40°C for 6 min. 2) The enzyme hydrolyzes only 5′-nucleotides of guanine, adenine, hypoxanthine, uracil and cytosine, but never splits nicotinamide mononucleotide, thiamine monophosphate, ribose 5-monophosphate and flavin mononucleotide. 3) The enzyme seems to have specially high affinity for 5′-AMP. 4) The enzyme activity is accelerated by addition of Co⁺⁺ and Ni⁺⁺, but inhibited by Ag⁺, Cu⁺⁺, EDTA, I₂ and N-bromosuccimide. Mg⁺⁺, KCN, NaF and thiol reagents except p-chloromercuribenzoate have no effects. 5) Nucleosides have inhibitory effects, among which adenosine is most effective inhibitor. 6) The activity is reduced up to 30% by dialysis against 1 mm EDTA solution, and the reduced activity is completely reactivated by addition of Co⁺⁺ or Ni⁺⁺, but not by Mn⁺⁺ or Mg⁺⁺.     

Lipase production by Serratia marcescens strain SN5gR isolated from the scat of lion-tailed macaque (Macaca silenus) in Silent Valley National Park, a biodiversity hotspot in India

An extracellular lipase-producing bacterium was isolated from a fecal sample of lion-tailed macaque (Macaca silenus), an endangered Old World monkey that is endemic to the Western Ghats of South India. Morphological, biochemical and molecular analyses identified the bacterium as Serratia marcescens. Production of lipase was investigated in shake-flask culture. Optimum tributyrin concentration of 1.5 % was found to be the most suitable triglyceride to increase lipase production (13.3 U ml^?1). The next best lipid source observed was olive oil (11.94 U ml^?1), followed by castor oil, coconut oil and palm oil. Analyzing the effect of different carbon sources on lipase production revealed that 2 % glucose yielded higher lipase production than the other tested carbon sources. Investigations on suitable nitrogen source for lipase production revealed that 2 % meat extract yielded higher lipase production. The most suitable trace element for maximum lipase production was zinc sulfate, followed by magnesium sulfate and copper sulfate. Partial characterization of the crude lipase revealed that pH 7.0 and a temperature of 40 °C gave optimal lipase activity. Enzymatic activity of the crude sample was retained over a wide temperature range (20–75 °C), and 70 % of enzyme activity was retained at 60 °C. Testing the effect of various organic solvents on lipase activity revealed that hexadecane increased lipase activity by 85 % over the control.     

Aggregation properties of cold-active lipase produced by a psychrotolerant strain of Pseudomonas palleroniana (GBPI_508)

Abstract

The present study aims to exploit microbial potential from colder region to produce lipase enzyme stable at low temperatures. A newly isolated bacterium GBPI_508 from Himalayan environment, was investigated for the production of cold-active lipase emphasizing on its aggregation properties. Plate based assays followed by quantitative production of enzyme was estimated under different culture conditions. Further characterization of partially purified enzyme was done for molecular weight determination and activity and stability under varying conditions of pH, temperature, and in presence of organic solvents, inhibitors, and metal ions. The psychrotolerant bacterium was identified as Pseudomonas palleroniana following 16S rRNA gene sequencing. Maximum lipase production by GBPI_508 was recorded in 7?days at 25?°C utilizing yeast extract as nitrogen source and olive oil as substrate in the lipase production medium. Triton X-100 (1%) in the medium as emulsifier significantly enhanced the lipase production. Lipase produced by bacterium showed aggregation which was confirmed by dynamic light scattering and native PAGE. SDS-PAGE followed by zymogram analysis of partially purified enzyme showed two active bands of ～50?kDa and ～54?kDa. Optimum activity of partially purified enzymatic preparation was recorded at 40?°C while the activity remained nearly consistent from pH 7.0 to 12.0, whereas, maximum stability was recorded at pH values 7.0 and 11.0 at 25?°C. Interestingly, lipase in the partially purified fraction retained 60% enzyme activity at 10?°C. Medium chain pNP ester (C10) was the most preferred substrate for the lipase of GBPI_508. The lipase possessed >50% residual activity when incubated with different organic solvents (25% v/v) except toluene and dichloromethane which inhibited the activity below 50%. Partially purified enzyme was also stable in the presence of metal ions and inhibitors. The study suggests applicability of GBPI_508 lipase in low temperature conditions such as cold-active detergent formulations and cold bioremediation.     

Characterization of Active Lentinula edodes Glucoamylase Expressed and Secreted by Saccharomyces cerevisiae

The gene encoding Lentinula edodes glucoamylase (GLA) was cloned into Saccharomyces cerevisiae, expressed constitutively and secreted in an active form. The enzyme was purified to homogeneity by (NH₄)₂SO₄ fractionation, anion exchange and affinity chromatography. The protein had a correct N-terminal sequence of WAQSSVIDAYVAS, indicating that the signal peptide was efficiently cleaved. The recombinant enzyme was glycosylated with a 2.4% carbohydrate content. It had a pH optimum of 4.6 and a pH 3.4–6.4 stability range. The temperature optimum was 50°C with stability ≤50°C. The enzyme showed considerable loss of activity when incubated with glucose (44%), glucosamine (68%), galactose (22%), and xylose (64%). The addition of Mn⁺⁺ activated the enzyme by 45%, while Li⁺, Zn⁺⁺, Mg⁺⁺, Cu⁺, Ca⁺⁺, and EDTA had no effect. The enzyme hydrolyzed amylopectin at rates 1.5 and 8.0 times that of soluble starch and amylose, respectively. Soluble starch was hydrolyzed 16 and 29 times faster than wheat and corn starch granules, respectively, with the hydrolysis of starch granules using 10× the amount of GLA. Apparent K_m and V_max for soluble starch were estimated to be 3.0 mg/ml and 0.13 mg/ml/min (40°C, pH 5.3), with an apparent k_cat of 2.9×10⁵ min⁻¹.     

Influence of cultivation conditions on the production of a thermostable extracellular lipase from Amycolatopsis mediterranei DSM 43304

Among several lipase-producing actinomycete strains screened, Amycolatopsis mediterranei DSM 43304 was found to produce a thermostable, extracellular lipase. Culture conditions and nutrient source modification studies involving carbon sources, nitrogen sources, incubation temperature and medium pH were carried out. Lipase activity of 1.37 ± 0.103 IU/ml of culture medium was obtained in 96 h at 28°C and pH 7.5 using linseed oil and fructose as carbon sources and a combination of phytone peptone and yeast extract (5:1) as nitrogen sources. Under optimal culture conditions, the lipase activity was enhanced 12-fold with a twofold increase in lipase specific activity. The lipase showed maximum activity at 60°C and pH 8.0. The enzyme was stable between pH 5.0 and 9.0 and temperatures up to 60°C. Lipase activity was significantly enhanced by Fe³⁺ and strongly inhibited by Hg²⁺. Li⁺, Mg²⁺ and PMSF significantly reduced lipase activity, whereas other metal ions and effectors had no significant effect at 0.01 M concentration. A. mediterranei DSM 43304 lipase exhibited remarkable stability in the presence of a wide range of organic solvents at 25% (v/v) concentration for 24 h. These features render this novel lipase attractive for potential biotechnological applications in organic synthesis reactions.     

Purification and Characterisation of an F16L Mutant of a Thermostable Lipase

A mutant of the lipase from Geobacillus sp. strain T1 with a phenylalanine to leucine substitution at position 16 was overexpressed in Escherichia coli strain BL21(De3)pLysS. The crude enzyme was purified by two-step affinity chromatography with a final recovery and specific activity of 47.4 and 6,315.8 U/mg, respectively. The molecular weight of the purified F16L lipase was approximately 43 kDa by 12% SDS-PAGE analysis. The F16L lipase was demonstrated to be a thermophilic enzyme due its optimum temperature at 70 °C and showed stability over a temperature range of 40–60 °C. The enzyme exhibited an optimum pH 7 in phosphate buffer and was relatively stable at an alkaline pH 8–9. Metal ions such as Ca²⁺, Mn²⁺, Na⁺, and K⁺ enhanced the lipase activity, but Mg²⁺, Zn²⁺, and Fe²⁺ inhibited the lipase. All surfactants tested, including Tween 20, 40, 60, 80, Triton X-100, and SDS, significantly inhibited the lipolytic action of the lipase. A high hydrolytic rate was observed on long-chain natural oils and triglycerides, with a notable preference for olive oil (C18:1; natural oil) and triolein (C18:1; triglyceride). The F16L lipase was deduced to be a metalloenzyme because it was strongly inhibited by 5 mM EDTA. Moderate inhibition was observed in the presence of PMSF at a similar concentration, indicating that serine residues are involved in its catalytic action. Further, the activity was not impaired by water-miscible solvents, including methanol, ethanol, and acetone.     

Effects of calcium ions and quinolinic acid on rat kidney mitochondrial kynurenine aminotransferase

At pH 6.4, rat kidney mitochondrial kynurenine aminotransferase activity is enhanced several-fold by the addition of CaCl₂, apparently because Ca⁺⁺ facilitates the translocation of α-ketoglutarate, one of the substrates, across the mitochondrial inner membrane. Chloride salts or Mg⁺⁺, Mn⁺⁺, Na⁺, K⁺, and NH₄⁺ did not have this effect. At pH 6.8, the enzyme activity was near maximal even without added Ca⁺⁺ but was strongly depressed by either of two calcium chelating agents, quinolinic acid (Q.A.) and ethyleneglycol-bis(β-aminoethyl ether)N,N′-tetraacetic acid (EGTA). These observations support the view that Ca⁺⁺ is involved in regulating kidney mitochondrial translocation of α-ketoglutarate and that the reported interference of polycarboxylate anion translocation by Q.A. $\text{in vivo}$ depends on the ability of that agent to chelate Ca⁺⁺.     

Synthesis of a green polyurethane foam from a biopolyol obtained by enzymatic glycerolysis and its use for immobilization of lipase NS-40116

The use of green sources for materials synthesis has gained popularity in recent years. This work investigated the immobilization of lipase NS-40116 (Thermomyces lanuginosus lipase) in polyurethane foam (PUF) using a biopolyol obtained through the enzymatic glycerolysis between castor oil and glycerol, catalyzed by the commercial lipase Novozym 435 for the PUF formation. The reaction was performed to obtain biopolyol resulting in the conversion of 64% in mono- and diacylglycerol, promoting the efficient use of the reaction product as biopolyol to obtain polyurethane foam. The enzymatic derivative with immobilized lipase NS-40116 presented apparent density of 0.19 ± 0.03 g/cm³ and an immobilization yield was 94 ± 4%. Free and immobilized lipase NS-40116 were characterized in different solvents (methanol, ethanol, and propanol), temperatures (20, 40, 60 and 80 °C), pH (3, 5, 7, 9 and 11) and presence of ions Na⁺, Mg⁺⁺, and Ca⁺⁺. The support provided higher stability to the enzyme, mainly when subjected to acid pH (free lipase lost 80% of relative activity after 360 h of contact, when the enzymatic derivative lost around 22%) and high-temperature free lipase lost 50% of relative activity, while the immobilized remained 95%. The enzymatic derivative was also used for esterification reactions and conversions around 66% in fatty acid methyl esters, using abdominal chicken fat as feedstock, were obtained in the first use, maintaining this high conversion until the fourth reuse, proving that the support obtained using environmentally friendly techniques is applicable.

     

Lipase from Pseudomonas fragi. II. Properties of the Enzyme

The optimal pH value of a lipase from Pseudomonas fragi was between 7.5 and 8.9, and a high reaction rate was observed at 54 C. Heating the enzyme solution at 63 C for 30 min inactivated only 27.6% of its activity; however, total inactivation was observed at 66 C after 1 hr and at 71 C after 10 min. The lipase was inhibited strongly by Fe⁺⁺⁺ and Fe⁺⁺ ions, and to a lesser extent by Co⁺⁺, Cu⁺⁺, Zn⁺⁺. No inhibition was observed with Ca⁺⁺ or NaF. Ethylenediaminetetraacetate was effective in removing the toxicity of Fe⁺⁺⁺. The activity of the enzyme was inhibited markedly by p-chloromercurobenzoate, but the effects of N-ethylmaleimide and iodoacetate were moderate. The enzyme was able to hydrolyze natural fats, synthetic triglycerides, and alcohol esters. The order of the rate of hydrolysis of some triglycerides under experimental conditions was, from the fastest to the lowest, trilaurin, tricaprin, tricaprylin, tripalmitin, tributyrin, tricaproin, and tristearin. The enzyme was capable of hydrolyzing methyl butyrate, but the rate of hydrolysis was about one-fifth that for triolein and one-thirteenth that for coconut oil. The enzyme lost its activity rapidly when held frozen, at 20 C, and at the extremes in pH. Glutathione, cysteine, and mercaptoethanol did not preserve the activity of the enzyme.     

Purification of lipase from Geotrichum candidum: conditions optimized for enzyme production using Box–Behnken design

The fungus Geotrichum candidum was selected from isolates of oil-mill waste as a potent lipase producer. Factors affecting lipase production by the fungus G. candidum in yeast-extract-peptone medium have been optimized by using a Box–Behnken design with seven variables to identify the significant correlation between effects of these variables in the production of the enzyme lipase. The experimental values were found to be in accordance with the predicted values, the correlation coefficient is 0.9957. It was observed that the variables days (6), pH (7.0), temperature (30 °C), carbon (1.25%), nitrogen (2.0%), Tween (1.0%) and salt concentrations (0.5 mM) were the optimum conditions for maximum lipase production (87.7 LU/ml). The enzyme was purified to homogeneity with an apparent molecular mass of 32 kDa by SDS-PAGE. The optimum pH at 40 °C was 7.0 and the optimum temperature at pH 7.0 was 40 °C. The enzyme was stable within a pH range of 6.5 to 8.5 at 30 °C for 24 h. The enzyme activity was strongly inhibited by AgNO₃, NiCl₂, HgCl₂, and EDTA. However, the presence of Ca²⁺ and Ba²⁺ ions enhanced the activity of the enzyme.     

An L-arabinose isomerase from Acidothermus cellulolytics ATCC 43068: cloning, expression, purification, and characterization

The araA gene encoding an L-arabinose isomerase (L-AI) from the acido-thermophilic bacterium Acidothermus cellulolytics ATCC 43068 was cloned and overexpressed in Escherichia coli. The open reading frame of the L-AI consisted of 1,503 nucleotides encoding 501 amino acid residues. The recombinant L-AI was purified to homogeneity by heat treatment, ion-exchange chromatography, and gel filtration. The molecular mass of the enzyme was estimated to be approximately 55 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified enzyme was optimally active at 75°C and pH 7.5. It required divalent metal ions, either Mn²⁺ or Co²⁺, for both enzymatic activity and thermostability improvement at higher temperatures. The enzyme showed relatively high activity and stability at acidic pH. It exhibited over 90% of its maximal activity at pH 6.0 and retained 80% of activity after 12 h incubation at pH 6.0. Catalytic property study showed that the enzyme had an interesting catalytic efficiency. Its apparent K _m, V _max, and catalytic efficiency (k _cat/K _m) for D-galactose was 28.9 mM, 4.9 U/mg, and 9.3 mM⁻¹ min⁻¹, respectively. The enzyme carried out the isomerization of D-galactose to D-tagatose with a conversion yield over 50% after 12 h under optimal conditions, suggesting its potential in D-tagatose production.     

Effects of oils and oil-related substrates on the synthetic activity of membrane-bound lipase from Rhizopus chinensis and optimization of the lipase fermentation media

The lipase from filamentous fungi Rhizopus chinensis, as a membrane-bound enzyme, possesses the excellent catalysis ability for esterification and transesterification reactions, and has a good potential in many industrial applications. In order to improve the synthetic activity of the lipase, the effects of oils and oil-related substrates on its production and the fermentation media optimization were investigated. Based on the results, it was suggested that oleic acid could be the important substrate for the lipase production. Among various oils and oil-related substrates, olive oil containing high content of oleic acid was the optimal one for the lipase production. Using orthogonal test and response surface methodology (RSM), the composition of fermentation media was further optimized. The optimized media for lipase synthetic activity and activity yield was composed of peptone 57.94 and 55.58 g L⁻¹, olive oil 21.94 and 22.99 g L⁻¹, maltose 12.91 and 14.34 g L⁻¹, respectively, with K₂HPO₄ 3 g L⁻¹, MgSO₄·7H₂O 5 g L⁻¹ and initial pH 6.0. Under the optimal conditions, the lipase activity and the activity yield were improved 61.5 and 93.4% comparing the results before optimization, respectively. The adequate models obtained had predicted the lipase production successfully.     

Novel thermoactive glucoamylases from the thermoacidophilic Archaea Thermoplasma acidophilum,Picrophilus torridus and Picrophilus oshimae

The thermoacidophilic Archaea Thermoplasma acidophilum (optimal growth at 60 °C and pH 1–2), Picrophilus torridus and Picrophilus oshimae (optimal growth at 60 °C and pH 0.7) were able to utilize starch as sole carbon source. During growth these microorganisms secreted heat and acid-stable glucoamylases into the culture fluid. Applying SDS gel electrophoresis activity bands were detected with appearent molecular mass (Mw) of 141.0, 95.0 kDa for T. acidophilum, 133.0, 90.0 kDa for P. torridus and 140.0, 85.0 kDa for P. oshimae. The purified enzymes were incubated with various polymeric substrates such as starch, pullulan, panose and isomaltose. The product pattern, analyzed by HPLC, showed that in all cases glucose was formed as the sole product of hydrolysis. The purified glucoamylases were optimally active at pH 2.0 and 90 °C and have an isoelectric points (pI) between 4.5 and 4.8. Enzymatic activity was detected even at pH 1.0 and 100 °C. The glucoamylases were thermostable at elevated temperature with a half-life of 24 h at 90 °C for both P. torridus and T. acidophilum, and 20 h at 90 °C for P. oshimae. The enzyme system of T. acidophilum has a lower K _m value for soluble starch (1.06 mg/ml) than the enzymes from P. oshimae and P. torridus (4.35 mg/ml and 2.5 mg/ml), respectively. Enzyme activity was not affected by Na⁺, Mg⁺⁺, Ca⁺⁺, Ni⁺⁺, Zn⁺⁺, Fe⁺⁺, EDTA and DTT. This revised version was published online in August 2006 with corrections to the Cover Date.