Proteolytic cleavage of encephalomyocarditis virus capsid region substrates by precursors to the 3C enzyme.

Picornavirus protease 3C is normally released from its P3 precursor by two successive self-cleavage reactions. The free enzyme can then catalyze most of the remaining processing events within the viral polyprotein. To investigate the role of the 3C precursors in the processing cascade, we constructed cDNA clones which expressed genetically altered forms of the encephalomyocarditis P3 region in vitro. Site-specific substitutions were introduced into the Gln-Gly residues at the 3B-3C and 3C-3D junctions, and the resulting proteins were tested for their ability to self-process and to catalyze cleavage of viral capsid precursors in cell-free protease assays. We determined that three P3 region precursor proteins (3ABC, 3CD, and P3), harboring inactive cleavage sites, were as active as the free enzyme (3C) in processing assays with capsid substrates. Further, we found that in addition to the naturally occurring Gln-Gly and Gln-Ser amino acid pairs, the encephalomyocarditis 3C enzyme was able to process Gln-Cys but not Gln-Thr, Gln-Ile, Gln-Tyr, Arg-Gly, or Leu-Gly combinations when these residues were substituted into normal cleavage site contexts.     

Functional characterization of the cleavage specificity of the sapovirus chymotrypsin-like protease

Sapovirus is a positive-stranded RNA virus with a translational strategy based on processing of a polyprotein precursor by a chymotrypsin-like protease. So far, the molecular mechanisms regulating cleavage specificity of the viral protease are poorly understood. In this study, the catalytic activities and substrate specificities of the predicted forms of the viral protease, the 3C-like protease (NS6) and the 3CD-like protease-polymerase (NS6-7), were examined in vitro. The purified NS6 and NS6-7 were able to cleave synthetic peptides (15 to 17 residues) displaying the cleavage sites of the sapovirus polyprotein, both NS6 and NS6-7 proteins being active forms of the viral protease. High-performance liquid chromatography and subsequent mass spectrometry analysis of digested products showed a specific trans cleavage of peptides bearing Gln-Gly, Gln-Ala, Glu-Gly, Glu-Pro, or Glu-Lys at the scissile bond. In contrast, peptides bearing Glu-Ala or Gln-Asp at the scissile bond (NS4-NS5 and NS5-NS6, or NS6-NS7 junctions, respectively) were resistant to trans cleavage by NS6 or NS6-7 proteins, whereas cis cleavage of the Glu-Ala scissile bond of the NS5-NS6 junction was evidenced. Interestingly, the presence of a Phe at position P4 overruled the resistance to trans cleavage of the Glu-Ala junction (NS5-NS6), whereas substitutions at the P1 and P2′ positions altered the cleavage efficiency. The differential cleavage observed is supported by a model of the substrate-binding site of the sapovirus protease, indicating that the P4, P1, and P2′ positions in the substrate modulate the cleavage specificity and efficiency of the sapovirus chymotrypsin-like protease.     

In vitro study of the NS2-3 protease of hepatitis C virus.

Processing at the C terminus of the NS2 protein of hepatitis C virus (HCV) is mediated by a virus-encoded protease which spans most of the NS2 protein and part of the NS3 polypeptide. In vitro cotranslational cleavage at the 2-3 junction is stimulated by the presence of microsomal membranes and ultimately results in the membrane insertion of the NS2 polypeptide. To characterize the biochemical properties of this viral protease, we have established an in vitro assay whereby the NS2-3 protease of HCV BK can be activated posttranslationally by the addition of detergents. The cleavage proficiency of several deletion and single point mutants was the same as that observed with microsomal membranes, indicating that the overall sequence requirements for proper cleavage at this site are maintained even under these artificial conditions. The processing efficiency of the NS2-3 protease varied according to the type of detergent used and its concentration. Also, the incubation temperature affected the cleavage at the 2-3 junction. The autoproteolytic activity of the NS2-3 protease could be inhibited by alkylating agents such as iodoacetamide and N-ethylmaleimide. Metal chelators such as EDTA and phenanthroline also inhibited the viral enzyme. The EDTA inhibition of NS2-3 cleavage could be reversed, at least in part, by the addition of ZnCl2 and CdCl2. Among the common protease inhibitors tested, tosyl phenylalanyl chloromethyl ketone and soybean trypsin inhibitor inactivated the NS2-3 protease. By means of gel filtration analysis, it was observed that the redox state of the reaction mixture greatly influenced the processing efficiency at the 2-3 site and that factors present in the rabbit reticulocyte lysate, wheat germ extract, and HeLa cell extract were required for efficient processing at this site. Thus, the in vitro assay should allow further characterization of the biochemical properties of the NS2-3 protease of HCV and the identification of host components that contribute to the efficient processing at the 2-3 junction.     

Cleavage specificity of purified recombinant hepatitis A virus 3C proteinase on natural substrates.

Hepatitis A virus (HAV) 3C proteinase expressed in Escherichia coli was purified to homogeneity, and its cleavage specificity towards various parts of the viral polyprotein was analyzed. Intermolecular cleavage of the P2-P3 domain of the HAV polyprotein gave rise to proteins 2A, 2B, 2C, 3ABC, and 3D, suggesting that in addition to the primary cleavage site, all secondary sites within P2 as well as the 3C/3D junction are cleaved by 3C. 3C-mediated processing of the P1-P2 precursor liberated 2A and 2BC, in addition to the structural proteins VP0, VP3, and VP1-2A and the respective intermediate products. A clear dependence on proteinase concentration was found for most cleavage sites, possibly reflecting the cleavage site preference of 3C. The most efficient cleavage occurred at the 2A/2B and 2C/3A junctions. The electrophoretic mobility of processing product 2B, as well as cleavage of the synthetic peptide KGLFSQ*AKISLFYT, suggests that the 2A/2B junction is located at amino acid position 836/837 of the HAV polyprotein. Furthermore, using suitable substrates we obtained evidence that sites VP3/VP1 and VP1/2A are alternatively processed by 3C, leading to either VP1-2A or to P1 and 2A. The results with regard to intermolecular cleavage by purified 3C were confirmed by the product pattern derived from cell-free expression and intramolecular processing of the entire polyprotein. We therefore propose that polyprotein processing of HAV relies on 3C as the single proteinase, possibly assisted by as-yet-undetermined viral or host cell factors and presumably controlled in a concentration-dependent fashion.     

Effects of temperature and lipophilic agents on poliovirus formation and RNA synthesis in a cell-free system.

The translation and primary processing events of poliovirus polyproteins in HeLa cell extracts were more efficient at 34 degrees C than at 30 or 36 degrees C. The cleavage products of P2 such as 2Apro, 2BC, and 2C appeared early in the reaction before the appearance of the cleavage products of P1 and of 3CDpro, an observation suggesting that P2 was cleaved in cis by 3CDpro. Proteolytic processing of the capsid precursor P1 into VP0, VP1, and VP3 was also more efficient at 34 degrees C than at either 30 or 32 degrees C. Surprisingly, processing of 3CDpro to 3Cpro and 3Dpol was almost completely inhibited at 36 degrees C. The synthesis of virus in the cell extract was greatly enhanced at 34 degrees C over that at 30 or 32 degrees C, whereas incubation at 36 degrees C yielded very little virus. Cerulenin, an inhibitor of lipid synthesis, did not appear to affect virus-specific translation or protein processing, but it almost completely inhibited viral synthesis in vitro. Oleic acid drastically inhibited in vitro translation at 100 microM and in vitro poliovirus synthesis at 25 microM. Addition of HeLa cell smooth membranes partially restored translation but not virus formation. Our observations suggest that in vitro translation, proteolytic processing, and virus formation require intact membranes. Analysis of the in vitro translation products revealed that viral RNA polymerase activity increased linearly during incubation of the translation mixture. RNA polymerase in the crude mixture was inhibited by oleic acid but not by cerulenin. Surprisingly, oleic acid had no direct effect on oligo(U)-primed, poly(A)-dependent poly(U) synthesis catalyzed by purified 3Dpol.     

Poliovirus capsid proteins derived from P1 precursors with glutamine-valine cleavage sites have defects in assembly and RNA encapsidation.

Assembly of poliovirus virions requires proteolytic cleavage of the P1 capsid precursor polyprotein between two separate glutamine-glycine (QG) amino acid pairs by the viral protease 3CD. In this study, we have investigated the effects on P1 polyprotein processing and subsequent assembly of processed capsid proteins caused by substitution of the glycine residue at the individual QG cleavage sites with valine (QG-->QV). P1 cDNAs encoding the valine substitutions were created by site-directed mutagenesis and were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses which expressed the mutant P1 precursors. The recombinant vaccinia virus-expressed mutant P1 polyproteins were analyzed for proteolytic processing defects in cells coinfected with a recombinant vaccinia virus (VVP3) that expresses the poliovirus 3CD protease and for processing and assembly defects by using a trans complementation system in which P1-expressing recombinant vaccinia viruses provide capsid precursor to a defective poliovirus genome that does not express functional capsid proteins (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The QV-substituted precursors were proteolytically processed at the altered sites both in cells coinfected with VVP3 and in cells coinfected with defective poliovirus, although the kinetics of cleavage at the altered sites were slower than those of cleavage at the wild-type QG site in the precursor. Completely processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor containing a valine at the amino terminus of VP3 (VP3-G001V) were unstable and failed to assemble stable subviral structures in cells coinfected with defective poliovirus. In contrast, capsid proteins derived from the P1 precursor with a valine substitution at the amino terminus of VP1 (VP1-G001V) assembled empty capsid particles but were deficient in assembling RNA-containing virions. The assembly characteristics of the VP1-G001V mutant were compared with those of a previously described VP3-VP1 cleavage site mutant (K. Kirkegaard and B. Nelsen, J. Virol. 64:185-194, 1990) which contained a deletion of the first four amino-terminal residues of VP1 (VP1-delta 1-4) and which was reconstructed for our studies into the recombinant vaccinia virus system. Complete proteolytic processing of the VP1-delta 1-4 precursor also occurred more slowly than complete cleavage of the wild-type precursor, and formation of virions was delayed; however, capsid proteins derived from the VP1-G001V mutant assembled RNA-containing virions less efficiently than those derived from the VP1-delta 1-4 precursor.(ABSTRACT TRUNCATED AT 400 WORDS)     

Release of the catalytic domain N(o) from the herpes simplex virus type 1 protease is required for viral growth.

The herpes simplex virus type 1 (HSV-1) protease and its substrate, ICP35, are involved in the assembly of viral capsids and required for efficient viral growth. The full-length protease (Pra) consists of 635 amino acid (aa) residues and is autoproteolytically processed at the release (R) site and the maturation (M) site, releasing the catalytic domain No (VP24), Nb (VP21), and a 25-aa peptide. To understand the biological importance of cleavage at these sites, we constructed several mutations in the cloned protease gene. Transfection assays were performed to determine the functional properties of these mutant proteins by their abilities to complement the growth of the protease deletion mutant m100. Our results indicate that (i) expression of full-length protease is not required for viral replication, since a 514-aa protease molecule lacking the M site could support viral growth; and that (ii) elimination of the R site by changing the residue Ala-247 to Ser abolished viral replication. To better understand the functions that are mediated by proteolytic processing at the R site of the protease, we engineered an HSV-1 recombinant virus containing a mutation at this site. Analysis of the mutant A247S virus demonstrated that (i) the mutant protease retained the ability to cleave at the M site and to trans process ICP35 but failed to support viral growth on Vero cells, demonstrating that release of the catalytic domain No from Pra is required for viral replication; and that (ii) only empty capsid structures were observed by electron microscopy in thin sections of A247S-infected Vero cells, indicating that viral DNA was not encapsidated. Our results demonstrate that processing of ICP35 is not sufficient to support viral replication and provide genetic evidence that the HSV-1 protease has nuclear functions other than enzymatic activity.     

Human rhinovirus 3C protease: cloning and expression of an active form in Escherichia coli

A cDNA encoding the viral protease from the 3C region of human rhinovirus type 14 was expressed in Escherichia coli through the use of a periplasmic secretion vector. The recombinant protease contained an eight amino acid N-terminal extension that enabled its detection by a specific antibody. It was expressed at a level of approximately 1 mg/L of E. coli culture. Biological activity of the protease was assessed in vitro by using a chemically synthesized peptide consisting of a consensus picornavirus protease cleavage site, Arg-Ala-Glu-Leu-Gln-Gly-Pro-Tyr-Asp-Glu. The peptide was cleaved by the recombinant protease at the Gln-Gly bond, generating the product peptides Arg-Ala-Glu-Leu-Gln and Gly-Pro-Tyr-Asp-Glu, which could be separated from the substrate peptide by reversed-phase HPLC. An in vitro assay for the rhinovirus 3C protease was developed by observing the rate of disappearance of the substrate peak from chromatograms of the supernatants of digestion mixtures.     

Active residues and viral substrate cleavage sites of the protease of the birnavirus infectious pancreatic necrosis virus

The polyprotein of infectious pancreatic necrosis virus (IPNV), a birnavirus, is processed by the viral protease VP4 (also named NS) to generate three polypeptides: pVP2, VP4, and VP3. Site-directed mutagenesis at 42 positions of the IPNV VP4 protein was performed to determine the active site and the important residues for the protease activity. Two residues (serine 633 and lysine 674) were critical for cleavage activity at both the pVP2-VP4 and the VP4-VP3 junctions. Wild-type activity at the pVP2-VP4 junction and a partial block (with an alteration of the cleavage specificity) at the VP4-VP3 junction were observed when replacement occurred at histidines 547 and 679. A similar observation was made when aspartic acid 693 was replaced by leucine, but wild-type activity and specificity were found when substituted by glutamine or asparagine. Sequence comparison between IPNV and two birnavirus (infectious bursal disease virus and Drosophila X virus) VP4s revealed that serine 633 and lysine 674 are conserved in these viruses, in contrast to histidines 547 and 679. The importance of serine 633 and lysine 674 is reminiscent of the protease active site of bacterial leader peptidases and their mitochondrial homologs and of the bacterial LexA-like proteases. Self-cleavage sites of IPNV VP4 were determined at the pVP2-VP4 and VP4-VP3 junctions by N-terminal sequencing and mutagenesis. Two alternative cleavage sites were also identified in the carboxyl domain of pVP2 by cumulative mutagenesis. The results suggest that VP4 cleaves the (Ser/Thr)-X-Ala / (Ser/Ala)-Gly motif, a target sequence with similarities to bacterial leader peptidases and herpesvirus protease cleavage sites.     

A mutant poliovirus containing a novel proteolytic cleavage site in VP3 is altered in viral maturation.

A six-amino-acid insertion containing a Q-G amino acid pair was introduced into the carboxy terminus of the capsid protein VP3 (between residues 236 and 237). Transfection of monkey cells with full-length poliovirus cDNA containing the insertion described above yields a mutant virus (Sel-1C-02) in which cleavage occurs almost entirely at the inserted Q-G amino acid pair instead of at the wild-type VP3-VP1 cleavage site. Mutant Sel-1C-02 is delayed in the kinetics of virus production at 39 degrees C and exhibits a defect in VP0 cleavage into VP2 and VP4 at 39 degrees C. Sucrose gradient analysis of HeLa cell extracts prepared from cells infected by Sel-1C-02 at 39 degrees C shows an accumulation of fast-sedimenting replication-packaging complexes and a significant amount of uncleaved VP0 present in fractions containing mature virions. Our data provide in vivo evidence for the importance of determinants other than the conserved amino acid pair (Q-G) for recognition and cleavage of the P1 precursor by proteinase 3CD and show that an alteration in the carboxy terminus of VP3 or the amino terminus of VP1 affects the process of viral maturation.     

Analysis of deletion mutants indicates that the 2A polypeptide of hepatitis A virus participates in virion morphogenesis

Unlike all other picornaviruses, the primary cleavage of the hepatitis A virus (HAV) polyprotein occurs at the 2A/2B junction and is carried out by the only proteinase encoded by the virus, 3C(pro). The resulting P1-2A capsid protein precursor is subsequently cleaved by 3C(pro) to generate VP0, VP3, and VP1-2A, which associate as pentamers. An unidentified cellular proteinase acting at the VP1/2A junction releases the mature capsid protein VP1 from VP1-2A later in the morphogenesis process. Although these aspects of polyprotein processing are well characterized, the function of 2A is unknown. To study its role in the viral life cycle, we assessed the infectivity of synthetic, genome-length RNAs containing 11 different in-frame deletions in the 2A region. Deletions in the N-terminal 40% of 2A abolished infectivity, whereas deletions in the C-terminal 60% resulted in viruses with a small-focus replication phenotype. C-terminal deletions in 2A had no effect on RNA replication kinetics under one-step growth conditions, nor did they have an effect on capsid protein synthesis and 3C(pro)-mediated processing. However, C-terminal deletions in 2A altered the VP1/2A cleavage, resulting in accumulation of uncleaved VP1-2A precursor in virions and possibly accounting for a delay in the appearance of infectious particles with these mutants, as well as a fourfold decrease in specific infectivity of the virus particles. When the capsid proteins were expressed from recombinant vaccinia viruses, the N-terminal part of 2A was required for efficient cleavage of the P1-2A precursor by 3C(pro) and assembly of structural precursors into pentamers. These data indicate that the N-terminal domain of 2A must be present as a C-terminal extension of P1 for folding of the capsid protein precursor to allow efficient 3C(pro)-mediated cleavages and to promote pentamer assembly, after which cleavage at the VP1/2A junction releases the mature VP1 protein, a process that appears to be necessary to produce highly infectious particles.     

Carboxy-terminal analysis of poliovirus proteins: termination of poliovirus RNA translation and location of unique poliovirus polyprotein cleavage sites.

The carboxy-terminal amino acids of a number of poliovirus proteins were determined by carboxypeptidase A analysis. The nonstructural proteins P3-2, P3-4b and their precursor. P3-1b, were found to be coterminal with a sequence of -Ser-Phe-COOH. As these proteins are coded for at the extreme 3' end of the viral RNA, it is possible to establish the termination site of translation at nucleotide 7,361, 73 nucleotides before the start of the polyadenylic acid tract of the RNA. Two additional nonstructural proteins, P2-X and its precursor, P2-3b, were also found to be coterminal with a sequence of -Phe-Gln-COOH. This result confirms the existence of at least one Gln-Gly proteolytic cleavage site. These Gln-Gly cleavage sites are predicted from the nucleotide sequence to be ubiquitous throughout the poliovirus genome. The only exceptions are the cleavage sites at the carboxy termini of the structural protein VP4 and VP1. Carboxypeptidase A analysis of VP1 establishes a terminal sequence of -Thr-Tyr-COOH, and similar analysis of VP4 shows Asn to be the terminal amino acid residue, observations that prove the existence of the exceptional C-terminal amino acids. In none of the analyzed cases has C-terminal trimming after cleavage been observed.     

Maturation of the Hepatitis A Virus Capsid Protein VP1 Is Not Dependent on Processing by the 3Cpro Proteinase

Most details of the processing of the hepatitis A virus (HAV) polyprotein are known. Unique among members of the family Picornaviridae, the primary cleavage of the HAV polyprotein is mediated by 3Cpro, the only proteinase known to be encoded by the virus, at the 2A/2B junction. All other cleavages of the polyprotein have been considered to be due to 3Cpro, although the precise location and mechanism responsible for the VP1/2A cleavage have been controversial. Here we present data that argue strongly against the involvement of the HAV 3Cpro proteinase in the maturation of VP1 from its VP1-2A precursor. Using a heterologous expression system based on recombinant vaccinia viruses directing the expression of full-length or truncated capsid protein precursors, we show that the C terminus of the mature VP1 capsid protein is located near residue 764 of the polyprotein. However, a proteolytically active HAV 3Cpro that was capable of directing both VP0/VP3 and VP3/VP1 cleavages in vaccinia virus-infected cells failed to process the VP1-2A precursor. Using site-directed mutagenesis of an infectious molecular clone of HAV, we modified potential VP1/2A cleavage sites that fit known 3Cpro recognition criteria and found that a substitution that ablates the presumed 3Cpro dipeptide recognition sequence at Glu764-Ser765 abolished neither infectivity nor normal VP1 maturation. Altered electrophoretic mobility of VP1 from a viable mutant virus with an Arg764 substitution indicated that this residue is present in VP1 and that the VP1/2A cleavage occurs downstream of this residue. These data indicate that maturation of the HAV VP1 capsid protein is not dependent on 3Cpro processing and may thus be uniquely dependent on a cellular proteinase.     

Hepatitis A Virus Capsid Protein VP1 Has a Heterogeneous C Terminus

Hepatitis A virus (HAV) encodes a single polyprotein which is posttranslationally processed into the functional structural and nonstructural proteins. Only one protease, viral protease 3C, has been implicated in the nine protein scissions. Processing of the capsid protein precursor region generates a unique intermediate, PX (VP1-2A), which accumulates in infected cells and is assumed to serve as precursor to VP1 found in virions, although the details of this reaction have not been determined. Coexpression in transfected cells of a variety of P1 precursor proteins with viral protease 3C demonstrated efficient production of PX, as well as VP0 and VP3; however, no mature VP1 protein was detected. To identify the C-terminal amino acid residue of HAV VP1, we performed peptide sequence analysis by protease-catalyzed [18O]H2O incorporation followed by liquid chromatography ion-trap microspray tandem mass spectrometry of HAV VP1 isolated from purified virions. Two different cell culture-adapted isolates of HAV, strains HM175pE and HM175p35, were used for these analyses. VP1 preparations from both virus isolates contained heterogeneous C termini. The predominant C-terminal amino acid in both virus preparations was VP1-Ser274, which is located N terminal to a methionine residue in VP1-2A. In addition, the analysis of HM175pE recovered smaller amounts of amino acids VP1-Glu273 and VP1-Thr272. In the case of HM175p35, which contains valine at amino acid position VP1-273, VP1-Thr272 was found in addition to VP1-Ser274. The data suggest that HAV 3C is not the protease responsible for generation of the VP1 C terminus. We propose the involvement of host cell protease(s) in the production of HAV VP1.     

Amino acid substitutions in the poliovirus maturation cleavage site affect assembly and result in accumulation of provirions.

The assembly of infectious poliovirus virions requires a proteolytic cleavage between an asparagine-serine amino acid pair (the maturation cleavage site) in VP0 after encapsidation of the genomic RNA. In this study, we have investigated the effects that mutations in the maturation cleavage site have on P1 polyprotein processing, assembly of subviral intermediates, and encapsidation of the viral genomic RNA. We have made mutations in the maturation cleavage site which change the asparagine-serine amino acid pair to either glutamine-glycine or threonine-serine. The mutations were created by site-directed mutagenesis of P1 cDNAs which were recombined into wild-type vaccinia virus to generate recombinant vaccinia viruses. The P1 polyproteins expressed from the recombinant vaccinia viruses were analyzed for proteolytic processing and assembly defects in cells coinfected with a recombinant vaccinia virus (VV-P3) that expresses the poliovirus 3CD protease. A trans complementation system using a defective poliovirus genome was utilized to assess the capacity of the mutant P1 proteins to encapsidate genomic RNA (D. C. Ansardi, D. C. Porter, and C. D. Morrow, J. Virol. 67:3684-3690, 1993). The mutant P1 proteins containing the glutamine-glycine amino acid pair (VP4-QG) and the threonine-serine pair (VP4-TS) were processed by 3CD provided in trans from VV-P3. The processed capsid proteins VP0, VP3, and VP1 derived from the mutant precursor VP4-QG were unstable and failed to assemble into subviral structures in cells coinfected with VV-P3. However, the capsid proteins derived from VP4-QG did assemble into empty-capsid-like structures in the presence of the defective poliovirus genome. In contrast, the capsid proteins derived from processing of the VP4-TS mutant assembled into subviral intermediates both in the presence and in the absence of the defective genome RNA. By a sedimentation analysis, we determined that the capsid proteins derived from the VP4-TS precursor encapsidated the defective genome RNA. However, the cleavage of VP0 to VP4 and VP2 was delayed, resulting in the accumulation of provirions. The maturation cleavage of the VP0 protein containing the VP4-TS mutation was accelerated by incubation of the provirions at 37 degrees C. The results of these studies demonstrate that mutations in the maturation cleavage site have profound effects on the subsequent capability of the capsid proteins to assemble and provide evidence for the existence of the provirion as an assembly intermediate.     

The NS2 protein of hepatitis C virus is a transmembrane polypeptide.

The NS2 protein of hepatitis C virus (HCV) is released from its polyprotein precursor by two proteolytic cleavages. The N terminus of this protein is separated from the E2/p7 polypeptide by a cleavage thought to be mediated by signal peptidase, whereas the NS2-3 junction located at the C terminus is processed by a viral protease. To characterize the biogenesis of NS2 encoded by the BK strain of HCV, we have defined the minimal region of the polyprotein required for efficient cleavage at the NS2-3 site and analyzed the interaction of the mature polypeptide with the membrane of the endoplasmic reticulum (ER). We have observed that although cleavage can occur in vitro in the absence of microsomal membranes, synthesis of the polyprotein precursor in the presence of membranes greatly increases processing at this site. Furthermore, we show that the membrane dependency for efficient in vitro processing varies among different HCV strains and that host proteins located on the ER membrane, and in particular the signal recognition particle receptor, are required to sustain efficient proteolysis. By means of sedimentation analysis, protease protection assay, and site-directed mutagenesis, we also demonstrate that the NS2 protein derived from processing at the NS2-3 site is a transmembrane polypeptide, with the C terminus translocated in the lumen of the ER and the N terminus located in the cytosol.     

Synthetic peptides as substrates and inhibitors of human immune deficiency virus-1 protease

Retroviruses code for a virus-specific protease which is essential for polyprotein processing and viral infectivity. The human immune deficiency virus-1 protease is an aspartic protease of 9 kDa which was synthesized by recombinant DNA technology and arises by autocatalytic processing from a polyprotein precursor which has recently been demonstrated by use of a protease-specific monoclonal antibody. The protease was shown to form dimers. Here we demonstrate that synthetic peptides can be used as both model substrates as well as inhibitors for investigation of the protease. 14 synthetic peptides, 7-18 amino acids in length, containing putative protease cleavage sites of the viral polyprotein gag and pol precursors, have been analyzed with the partially purified protease by the use of high performance liquid chromatography. In seven cases, where cleavage was observed, the length of the peptides did not significantly influence the cleavage efficiencies, heptapeptides being large enough as model substrates. No cleavage was observed with a protein preparation purified in parallel from control bacteria not expressing the human immune deficiency virus-1 protease. The protease was not only able to cut next to a proline but also between other peptides indicating that the proline is not a prerequisite. Three peptides with either reduced bonds at the cleavage site or a substitution by statin were inhibitory while another uncleaved substrate was not. The usefulness of small model substrates for characterization of the protease is further demonstrated by determination of a kinetic optimum pH (3.5-5.5) and incubation temperature (37 degrees C).