High-extinction-ratio and low-insertion-loss Plasmonic Filter with Coherent Coupled Nano-cavity Array in a MIM Waveguide

In this paper, a novel plasmonic filter with very high extinction ratio and low insertion loss is proposed based on the coherent coupled nano-cavity array in a metal–insulator–metal (MIM) waveguide. The coherent coupling interactions among nano-cavities are investigated with an analytical model which is derived based on the temporal coupled-mode theory and transfer-matrix method. The destructive interference of the surface plasmon polaritons coupled from the nano-cavities at the resonant wavelength is achieved by suitably designing the period of the cavity array, which may be used for increasing the extinction ratio of the filter based on the nano-cavity array in the MIM waveguide. A plasmonic filter with an extinction ratio higher than 60 dB and an insertion loss less than 1.0 dB is obtained by applying the destructive interference in the design of a six-rectangular-cavity array in an Ag–air–Ag waveguide. And the correctness of the design for the filter is verified by the results obtained with the finite-difference time-domain simulation technique. This work may provide useful schemes and approaches for realization of various wavelength-sensitive devices in plasmonic integrated circuits.     

Negative and Positive Impact of Roughness and Loss on Subwavelength Imaging for Superlens Structures

We study on the negative and positive effect of surface roughness and loss coefficient on subwavelength imaging of the superlens structure. It has been found that even though surface roughness enables more transmission of high spatial frequency components, the random interferential noise between neighborhood images becomes more severe with increasing distortion. We show that additional loss is able to restrain the interferential noise caused by random roughness while preserving the imaging integrity. The results with practical parameters prove that the mean contrast and uniformity are improved by adding adequate loss on rough surface. Moreover, other two situations are further studied: (a) a single superlens with roughness on different interfaces and (b) a multilayered alternated metal–dielectric superlens with roughness on each surface. We found that the roughness on the imaging surface (metal–photoresist interface) plays a major role in determining the superlens imaging. The multilayer superlens is able to enhance the subwavelength imaging with fractionalized thinner films. But with the further fractionizing layers, the multilayer becomes more vulnerable to the roughness due to the multiple mixing and distorting. We still prove that additional loss is able to improve the performance in both situations.     

Analysis and Optimum Design of Hybrid Plasmonic Slab Waveguides

Propagation properties of hybrid plasmonic slab waveguides are studied in detail using transfer matrix method considering structural and material aspects. Hybrid metal–insulator, hybrid metal–insulator–metal, and hybrid insulator–metal–insulator waveguides are considered. Propagation length (L _p), spatial length (L _s), and mode length (L _m) are utilized as three common figures of merit to compare and optimize the waveguides according to the layer thicknesses and metal/dielectric materials. The effect of constituting materials including metals (such as silver, gold, copper, and aluminum) and dielectrics (common dielectric materials used in photonic integrated circuit technologies such as silicon and silicon compounds, III–V compounds, and polymers) are discussed. It is found that hybrid waveguides are partially to completely superior to conventional plasmonic waveguides, providing a better balance between confinement and loss.     

Sodium–Sulfur Flow Battery for Low‐Cost Electrical Storage

A new sodium–sulfur (Na–S) flow battery utilizing molten sodium metal and flowable sulfur‐based suspension as electrodes is demonstrated and analyzed for the first time. Unlike the conventional flow battery and the high‐temperature Na–S battery, the proposed flow battery system decouples the energy and power thermal management by operating at different temperatures for the storage tank (near room temperature) and the power stack (100–150 °C). The new Na–S flow battery offers several advantages such as easy preparation and integration of the electrode, low energy efficiency loss due to temperature maintenance, great tolerance of the volume change of the metal anode, and efficient utilization of sulfur. The Na–S flow battery has an estimated system cost in the range of $50–100 kWh^?1 which is very competitive for grid‐scale energy storage applications.     

Metal–Air Batteries: From Static to Flow System

As an emerging battery technology, metal–air flow batteries inherit the advantageous features of the unique structural design of conventional redox flow batteries and the high energy density of metal–air batteries, thus showing great potential as efficient electrochemical systems for large‐scale electrical energy storage. This review summarizes the operating principles and recent progress of metal–air flow batteries from a materials and chemistry perspective, with particular emphasis on the latest advanced materials design and cell configuration engineering, which the authors divide into three categories based on the anode species: vanadium–air, zinc–air, and lithium–air flow batteries. Since some of the capabilities developed for metal–air static batteries can be leveraged for next‐generation flow systems, classical works on conventional metal–air batteries are selected and compared with the metal–air flow systems, highlighting the prominent advantages of the latter in achieving high energy capacity and long cycle performance. At the end, a general perspective on current challenges/opportunities and future research directions to promote the commercial application of the metal–air flow battery technology is provided. The aim is to provide a comprehensive overview and to set up a road map for guiding development from conventional static to advanced flow technologies of metal–air batteries.     

Intraspecific diversity affects stress response and the ecological performance of a cosmopolitan aquatic fungus

Fungi play an important role in organic matter turnover and ensure key ecosystem services in freshwaters. The relationships between intraspecific fungal diversity and key ecological processes remain largely unknown. We examined the effects of intraspecific diversity of Articulospora tetracladia, a cosmopolitan fungal decomposer thriving on plant detritus in streams. Alder leaves were inoculated with 1 or mixtures of 2–8 fungal strains for 35 d, and leaf litter decomposition and fungal reproduction were quantified in the presence and absence of 2 mg L⁻¹ of cadmium (Cd), a common stressor in polluted streams. Intraspecific diversity and identity affected fungal reproduction, but not leaf decomposition. Under metal stress, leaf decomposition slightly increased with intraspecific diversity. Fungal reproduction increased with intraspecific diversity and was greater in mixed assemblages, either in the absence or presence of Cd. Effect size of intraspecific diversity was higher under Cd stress for fungal reproduction, but no differences were found for leaf mass loss, with or without metal. The impacts of intraspecific diversity loss may jeopardize fungal survival and fungal functions, namely microbial leaf decomposition and leaf litter condition for invertebrate shredders in streams, particularly under metal stress.     

In situ generation of iminodiacetic acid groups on nanoporous alumina for the reversible immobilization of enzymes and other biomolecules

Nanoporous alumina membranes were silanized with aminopropylsilane and iminodiacetic acid (IDA) groups were generated in situ by reaction with iodoacetate. The membranes were mounted in standard filter holders, connected to a HPLC system and saturated with selected metal ions. Cu(II) allowed the capture of chicken muscle lactate dehydrogenase with such stability, repeatability and reproducibility that Michaelis–Menten kinetics could be studied. The IDA surface was stable for months and could be depleted and regenerated with metal ions multiple times without appreciable loss of capacity. The binding of lactate dehydrogenase influenced the backpressure to the extent that could be expected for a monolayer according to Poiseuilles law.     

A Stable Graphitic,Nanocarbon‐Encapsulated,Cobalt‐Rich Core–Shell Electrocatalyst as an Oxygen Electrode in a Water Electrolyzer

The oxygen electrode plays a vital role in the successful commercialization of renewable energy technologies, such as fuel cells and water electrolyzers. In this study, the Prussian blue analogue‐derived nitrogen‐doped nanocarbon (NC) layer‐trapped, cobalt‐rich, core–shell nanostructured electrocatalysts (core–shell Co@NC) are reported. The electrode exhibits an improved oxygen evolution activity and stability compared to that of the commercial noble electrodes. The core–shell Co@NC‐loaded nickel foam exhibits a lower overpotential of 330 mV than that of IrO₂ on nickel foam at 10 mA cm^?2 and has a durability of over 400 h. The commercial Pt/C cathode‐assisted, core–shell Co@NC–anode water electrolyzer delivers 10 mA cm^?2 at a cell voltage of 1.59 V, which is 70 mV lower than that of the IrO₂–anode water electrolyzer. Over the long‐term chronopotentiometry durability testing, the IrO₂–anode water electrolyzer shows a cell voltage loss of 230 mV (14%) at 95 h, but the loss of the core–shell Co@NC–anode electrolyzer is only 60 mV (4%) even after 350 h cell‐operation. The findings indicate that the Prussian blue analogue is a class of inorganic nanoporous materials that can be used to derive metal‐rich, core–shell electrocatalysts with enriched active centers.     

Li–Ti Cation Mixing Enhanced Structural and Performance Stability of Li‐Rich Layered Oxide

Li‐rich layered metal oxides are one type of the most promising cathode materials in lithium‐ion batteries but suffer from severe voltage decay during cycling because of the continuous transition metal (TM) migration into the Li layers. A Li‐rich layered metal oxide Li_1.2Ti_0.26Ni_0.18Co_0.18Mn_0.18O₂ (LTR) is hereby designed, in which some of the Ti⁴⁺ cations are intrinsically present in the Li layers. The native Li–Ti cation mixing structure enhances the tolerance for structural distortion and inhibits the migration of the TM ions in the TMO₂ slabs during (de)lithiation. Consequently, LTR exhibits a remarkable cycling stability of 97% capacity retention after 182 cycles, and the average discharge potential drops only 90 mV in 100 cycles. In‐depth studies by electron energy loss spectroscopy and aberration‐corrected scanning transmission electron microscopy demonstrate the Li–Ti mixing structure. The charge compensation mechanism is uncovered with X‐ray absorption spectroscopy and explained with the density function theory calculations. These results show the superiority of introducing transition metal ions into the Li layers in reinforcing the structural stability of the Li‐rich layered metal oxides. These findings shed light on a possible path to the development of Li‐rich materials with better potential retention and a longer lifespan.     

Metal trabecular bone reconstruction system better improves clinical efficacy and biomechanical repair of osteonecrosis of the femoral head than free vascularized fibular graft: A case–control study

In this study, we aim to compare and analyze the biomechanical repair and clinical efficacy of osteonecrosis of the femoral head (ONFH) with the use of metal trabecular bone reconstruction system and free vascularized fibular graft. The study enrolled 66 adult patients from medical records of nontraumatic ARCO 2A–3B stage ONFH. A simple ONFH model without surgical treatment was established in 13 cases, 29 cases were treated with metal trabecular bone reconstruction system, and 24 cases were treated with free vascularized fibular graft. Computer-recognized and extracted femur outlines were imported, and three-dimensional reconstructions were performed. The stress concentration and stress peak value were analyzed, and the Harris score, visual analog scale pain score, and operation status of the above patients were compared. Finally, quality of life assessment was performed using SF-36 scale. Metal trabecular bone reconstruction system provided less operation time, blood loss, and the total length of postoperative hospital stay than free vascularized fibular graft. Metal trabecular bone reconstruction system promoted bone reconstruction, increased bone mineral density and Harris score. The total clinical effective rate of young patients (20–40 years) was higher than that of older patients (41–60 years). Metal trabecular bone reconstruction system provided higher physical component summary, mental component summary, and role/social component summary than free vascularized fibular graft. This study demonstrates that both metal trabecular bone reconstruction system and free vascularized fibular graft can prevent or delay the progression of ONFH, while metal trabecular bone reconstruction system is a better choice because of better short-term clinical efficacy.     

Diffusion Limitation of Lithium Metal and Li–Mg Alloy Anodes on LLZO Type Solid Electrolytes as a Function of Temperature and Pressure

The morphological instability of the lithium metal anode is the key factor restricting the rate capability of lithium metal solid state batteries. During lithium stripping, pore formation takes place at the interface due to the slow diffusion kinetics of vacancies in the lithium metal. The resulting current focusing increases the internal cell resistance and promotes fast lithium penetration. In this work, galvanostatic electrochemical impedance spectroscopy is used to investigate operando the morphological changes at the interface by analysis of the interface capacitances. Therewith, the effect of temperature, stack pressure, and chemical modification is investigated. The work demonstrates that introducing 10 at% Mg into the lithium metal anode can effectively prevent contact loss. Nevertheless, a fundamental kinetic limitation is also observed for the Li‐rich alloy, namely the diffusion controlled decrease of the lithium metal concentration at the interface. An analytical diffusion model is used to describe the temperature‐dependent delithiation kinetics of Li–Mg alloys. Overall, it is shown that different electrode design concepts should be considered. Mg alloying can increase lithium utilization, when no external pressure is applied while pure lithium metal is superior for setups that allow stack pressures in the MPa range.     

Accumulation of Trace Metals by Mangrove Plants in Indian Sundarban Wetland: Prospects for Phytoremediation

The work investigates on the potential of ten mangrove species for absorption, accumulation and partitioning of trace metal(loid)s in individual plant tissues (leaves, bark and root/pneumatophore) at two study sites of Indian Sundarban Wetland. The metal(loid) concentration in host sediments and their geochemical characteristics were also considered. Mangrove sediments showed unique potential in many- fold increase for most metal(loid)s than plant tissues due to their inherent physicochemical properties. The ranges of concentration of trace metal(loid)s for As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn in plant tissue were 0.006–0.31, 0.02–2.97, 0.10–4.80, 0.13–6.49, 4.46–48.30, 9.2–938.1, 0.02–0.13, 9.8–1726, 11–5.41, 0.04–7.64, 3.81–52.20 μg g ^?1respectively. The bio- concentration factor (BCF) showed its maximum value (15.5) in Excoecaria agallocha for Cd, suggesting that it can be considered as a high-efficient plant for heavy metal bioaccumulation. Among all metals, Cd and Zn were highly bioaccumulated in E. agallocha (2.97 and 52.2 μg g ^?1 respectively. Our findings suggest that the species may be classified as efficient metal trap for Cd in aerial parts, as indicated by higher metal accumulation in the leaves combined with BCF and translocation factor (TF) values.     

Toward Promising Cathode Catalysts for Nonlithium Metal–Oxygen Batteries

The success of Li–air/O₂ batteries has brought extensive attention to the development of various promising non‐Li metal–O₂ batteries, such as Zn–O₂, Al–O₂, Mg–O₂ batteries, etc., which have exhibited unique advantages, such as low production cost, high energy density, and much enhanced safety. The versatile non‐Li metal–O₂ batteries provide a better opportunity for meeting the practical requirements for sustainable energy supplies in various applications. A high‐performance cathode in non‐Li metal–O₂ batteries that can effectively trigger both oxygen reduction and evolution reactions and thus boost the overall battery performance is of great research interest. In this article, a comprehensive review on the development of Li‐free metal–O₂ batteries and particularly focusing on the oxygen catalytic cathodes for both primary and secondary non‐Li metal–O₂ batteries is carefully performed. The current challenges and potential solutions are also outlined and proposed. Through carefully selecting and rationally designing promising catalytic cathodes, a series of non‐Li metal–oxygen batteries toward practical energy storage applications are highly anticipated.     

Strategies Toward Stable Nonaqueous Alkali Metal–O2 Batteries

Alkali metal–O₂ batteries, by coupling high‐capacity alkali metal anodes with gaseous oxygen, possess extremely high gravimetric energy density that is comparable to gasoline and are potential energy storage technologies beyond lithium–ion batteries. The development of alkali metal–O₂ batteries has achieved great progress in recent years, from materials to prototype devices and on fundamental mechanisms. The stability of alkali metal–O₂ batteries is still poor, however, leading to a huge gap between laboratory research and commercial applications. A series of parasitic reactions result in the instability, which occur during electrochemical discharging and charging. The ubiquitous active oxygen species attack both the organic electrolyte and the carbon cathode, triggering various parasitic reactions. Meanwhile, dendrite growth and volume expansion upon repeated plating/stripping and O₂ crossover severely limit the reversibility of alkali metal anodes. Here, an overview of the strategies against these issues is given to improve the stability of nonaqueous alkali metal–O₂ batteries, which is discussed from three aspects: air cathodes, alkali metal anodes, and aprotic electrolytes. Furthermore, perspectives for future research of stable alkali metal–O₂ batteries are outlined.     

Simultaneous Photoluminescence and SERS Observation of Nanodiamond at Laser Deposition on Noble Metals

The metal-modified luminescence and surface-enhanced Raman scattering (SERS) occurring near nanostructured surfaces of noble metals recently have been observed for different kinds of nanocrystals associated with the metal nanostructures. In the present work, the photoluminescence and Raman scattering of diamond nanocrystals of sizes 100 and 300 nm patterned on Ag and Au thin nanostructured films via laser accelerated deposition using a femtosecond laser are discussed. The laser accelerated deposition forms ordered periodical nanodiamond–metal nanostructures and allows adjusting the interaction between nanodiamond and metal by varying the laser acceleration parameters as well as by using different metals (Ag and Au), and varying the structure of the metal film. Correspondingly, the spectroscopic properties of the system determined by interaction between nanoparticles and metal are tuned. The enhancement of nanodiamond photoluminescence together with SERS of graphite fraction and disordered carbon of nanodiamonds are observed for nanodiamond–Ag structures at 488- and 532-nm excitations, while for the nanodiamond–Au structure some characteristic SERS effects are observed at 785-nm excitation. The mechanisms of enhancement are discussed considering the nanodiamond–metal interaction and laser acceleration effect on nanodiamond.     

Controlling the Active Sites of Sulfur‐Doped Carbon Nanotube–Graphene Nanolobes for Highly Efficient Oxygen Evolution and Reduction Catalysis

Controlling active sites of metal‐free catalysts is an important strategy to enhance activity of the oxygen evolution reaction (OER). Many attempts have been made to develop metal‐free catalysts, but the lack of understanding of active‐sites at the atomic‐level has slowed the design of highly active and stable metal‐free catalysts. A sequential two‐step strategy to dope sulfur into carbon nanotube–graphene nanolobes is developed. This bidoping strategy introduces stable sulfur–carbon active‐sites. Fluorescence emission of the sulfur K‐edge by X‐ray absorption near edge spectroscopy (XANES) and scanning transmission electron microscopy electron energy loss spectroscopy (STEM‐EELS) mapping and spectra confirm that increasing the incorporation of heterocyclic sulfur into the carbon ring of CNTs not only enhances OER activity with an overpotential of 350 mV at a current density of 10 mA cm^?2, but also retains 100% of stability after 75 h. The bidoped sulfur carbon nanotube–graphene nanolobes behave like the state‐of‐the‐art catalysts for OER but outperform those systems in terms of turnover frequency (TOF) which is two orders of magnitude greater than (20% Ir/C) at 400 mV overpotential with very high mass activity 1000 mA cm^?2 at 570 mV. Moreover, the sulfur bidoping strategy shows high catalytic activity for the oxygen reduction reaction (ORR). Stable bifunctional (ORR and OER) catalysts are low cost, and light‐weight bidoped sulfur carbon nanotubes are potential candidates for next‐generation metal‐free regenerative fuel cells.     

Localized Surface Plasmon Resonance and Refractive Index Sensitivity of Metal–Dielectric–Metal Multilayered Nanostructures

The localized surface plasmon resonances of multilayered nanostructures are studied using finite difference time domain simulations and plasmon hybridization method. Concentric metal–dielectric–metal (MDM) structure with metal core and nanoshell separated by a thin dielectric layer exhibits a strong coupling between the core and nanoshell plasmon resonance modes. The coupled resonance mode wavelengths show dependence on the dielectric layer thickness and composition of core and outer layer metal. The aluminum-based MDM structures show lower plasmon wavelength compared with Ag- and Au-based MDM nanostructures. The calculated refractive index sensitivity (RIS) factor is in the order Ag–Air–Ag>Au–Air–Au>Al–Air–Al for monometallic multilayered nanostructures. Bimetallic multilayered nanostructures support strong and tunable plasmon resonance wavelengths as well as high RIS factor of 510 nm/refractive index unit (RIU) and 470 nm/RIU for Al–Air–Au and Ag-Air-Au, respectively. The MDM structures not only exhibit higher index sensitivity but also cover a wide ultraviolet–near-infrared wavelengths, making these structures very promising for index sensing, biomolecule sensing, and surface-enhanced Raman spectroscopy.     

STABILITY OF ENHANCED YIELD AND METAL UPTAKE BY SUNFLOWER MUTANTS FOR IMPROVED PHYTOREMEDIATION

Plant biomass and metal shoot accumulation are key factors for efficient phytoextraction. In a previous study, chemical mutagenesis has been used to improve the phytoextraction potential of sunflowers. The main goal of the present study was to assess the stability of sunflower mutants with improved biomass and metal accumulation properties in the 3^rd and 4th generations. As compared to control plants, the best M₃ mutants showed the following improvement of metal extraction: Cd 3–5-fold, Zn 4–5-fold, and Pb 3–5-fold. The best M₄ sunflowers also showed enhanced metal extraction: Cd 3–4- fold, Zn 5–7-fold, Pb 6–8-fold and Cr 5–7-fold. The control sunflower inbred line IBL 04, grown directly on the field, accumulated metals in individual organs in the following decreasing order: Cd and Zn: leaves > stem > roots > flower > seeds; Cr: roots > flower > seeds > leaves > stem. The best sunflower mutants showed either higher metal accumulation in shoots or enhanced metal accumulation in roots, suggesting to improved phytoextraction or rhizofiltration efficiency, respectively.