Tuning the mechanical and physicochemical properties of cross-linked protein films

Films derived from natural sources such as proteins provide an advantage over synthetic films due to their noncytotoxicity, biodegradability, and vast functionality. A new protein source gained from the cataractous eye protein isolate (CEPI) obtained after surgery has been investigated for this purpose. Glycerol has been employed as the plasticizer and glutaraldehyde (GD) as a cross-linker. Fourier transform infrared spectroscopy was employed to characterize the films. Nanoindentation and thermogravimetric analyses reveal improved mechanical and thermal properties of the cross-linked films. The films with 20% (w/w) GD exhibited properties such as the highest modulus and low water solubility. It is possible to tune the properties based on the extent of cross-linking. All the films were completely degraded by the enzyme trypsin. The similarity of these films was checked by using the prepared films as a delivery vehicle for a model compound, ampicillin sodium. The encapsulation efficiency was found to be 74%, and in vitro release studies showed significant amounts of drug release at physiological pH. This study will help us understand how the properties of protein films can be tuned to obtain the desired physicochemical properties. These biodegradable protein films could find use in pharmaceutical industries as delivery carriers.     

Inherent charge-shifting polyelectrolyte multilayer blends: a facile route for tunable protein release from surfaces

Recent research has highlighted degradable multilayer films that enable the programmed release of different therapeutics. Multilayers constructed by the layer-by-layer (LbL) deposition that can undergo disassembly have been demonstrated to be of considerable interest, particularly for biomedical surface coatings due to their versatility and mild aqueous processing conditions, enabling the inclusion of biologic drugs with high activity. In this study, we examine the controlled release of a protein using a different mechanism for film disassembly, the gradual dissociation of film interactions under release conditions. Poly(β-amino ester)s and poly(L-lysine) (PLL) were used as the positively charged multilayer components coassembled with a model negatively charged antigen protein, ovalbumin (Ova). The release of the protein from these multilayer films is dominated by the slow shift in the charge of components under physiological pH conditions rather than by hydrolytic degradative release. The time scale of release can be varied over almost 2 orders of magnitude by varying the ratio of the two polyamines in the deposition solution. The highly versatile and tunable properties of these films form a basis for designing controlled and sequential delivery of drug coatings using a variety of polyions.     

Biodegradable chitosan matrix for the controlled release of steroids.

Chitosan, a polysaccharide, having structural characteristics similar to glycosaminoglycans, seems to be nontoxic and bioabsorbable. This study highlights the use of chitosan matrix for controlled drug delivery systems. The steroid drugs, namely testosterone, progesterone and beta-oestradiol were mixed with chitosan and the films were prepared by evaporation technique. The in vitro release profile of these steroids from the film matrix was monitored, as a function of time, in phosphate buffered saline (PBS, pH 7.4) at 37 degree C using a U-V-spectrophotometer. The degradation, of these chitosan and drug loaded chitosan films, was also investigated by weight loss and tensile strength studies. The steroid release from chitosan films was compared with the release of these drugs from their microbeads. It appears, the films and the microbeads stayed intact during the dissolution study of 90 days and the possibility of using these systems in contraceptive applications and novel drug delivery systems are discussed.     

Cell interactions with polyelectrolyte multilayer films

The short-term interactions of chondrosarcoma cells with polyelectrolyte multilayer films built up by the alternate adsorption of poly(L-lysine) (PLL) and poly(L-glutamic acid) (PGA) was studied in the presence and in the absence of serum. The films and their interaction with serum proteins were first characterized by means of optical waveguide lightmode spectroscopy, quartz crystal microbalance, and zeta potential measurements. In a serum-containing medium, the detachment forces measured by the micropipet technique were about eight times smaller on PGA-ending than on PLL-ending films. For these latter ones, the adhesion force decreased when the film thickness increased. In a serum-free medium, the differences between the negative- and positive-ending films were enhanced: adhesion forces on PLL-ending films were 40-100% higher, whereas no cellular adherence was found on PGA-terminating films. PGA-ending films were found to prevent the adsorption of serum proteins, whereas important protein adsorption was always observed on PLL-ending films. These results show how cell interactions with polyelectrolyte films can be tuned by the type of the outermost layer, the presence of proteins, and the number of layers in the film.     

Preparation, In Vitro Characterization and Preliminary In Vivo Evaluation of Buccal Polymeric Films Containing Chlorhexidine

The aim of this work was to investigate the suitability of some polymeric films as buccal systems for the delivery of the antiseptic drug chlorhexidine diacetate, considered as a valid adjunct in the treatment of oral candidiasis. Six different film formulations, mono- or double-layered, containing 5 or 10 mg of chlorhexidine diacetate, respectively, and alginate and/or hydroxypropylmethylcellulose and/or chitosan as excipients, were prepared by a casting-solvent evaporation technique and characterized in terms of drug content, morphology (scanning electron microscopy), drug release behavior, and swelling properties. Moreover, the in vivo concentrations of chlorhexidine diacetate in saliva were evaluated after application of a selected formulation on the oral mucosa of healthy volunteers. The casting-solvent evaporation proved to be a suitable technique for preparing soft, flexible, and easily handy mono- or double-layered chlorhexidine-loaded films. Some prepared formulations showed favorable in vitro drug release rates and swelling properties. The behavior of a selected formulation, chosen on the basis of its in vitro release results, was preliminarily investigated in vivo after application in the oral cavity of healthy volunteers. The films were well tolerated and the salivary chlorhexidine concentrations were maintained above the minimum inhibitory concentration for Candida albicans for almost 3 h. These preliminary results indicate that polymeric films can represent a valid vehicle for buccal delivery of antifungal/antimicrobial drugs.     

Drastically lowered protein adsorption on microbicidal hydrophobic/hydrophilic polyelectrolyte multilayers

Polyelectrolyte multilayer films assembled from a hydrophobic N-alkylated polyethylenimine and a hydrophilic polyacrylate were discovered to exhibit strong antifouling, as well as antimicrobial, activities. Surfaces coated with these layer-by-layer (LbL) films, which range from 6 to 10 bilayers (up to 45 nm in thickness), adsorbed up to 20 times less protein from blood plasma than the uncoated controls. The dependence of the antifouling activity on the nature of the polycation, as well as on assembly conditions and the number of layers in the LbL films, was investigated. Changing the hydrophobicity of the polycation altered the surface composition and the resistance to protein adsorption of the LbL films. Importantly, this resistance was greater for coated surfaces with the polyanion on top; for these films, the average zeta potential pointed to a near neutral surface charge, thus, presumably minimizing their electrostatic interactions with the protein. The film surface exhibited a large contact angle hysteresis, indicating a heterogeneous topology likely due to the existence of hydrophobic-hydrophilic regions on the surface. Scanning electron micrographs of the film surface revealed the existence of nanoscale domains. We hypothesize that the existence of hydrophobic/hydrophilic nanodomains, as well as surface charge neutrality, contributes to the LbL film's resistance to protein adsorption.     

Drug release from and hydrolytic degradation of a poly(ethylene glycol) grafted poly(3-hydroxyoctanoate)

Monoacrylate-poly(ethylene glycol)-grafted poly(3-hydroxyoctanoate) (PEGMA-g-PHO) copolymers were synthesized to develop a swelling-controlled release delivery system for ibuprofen as a model drug. The in vitro hydrolytic degradation of and the drug release from a film made of the PEGMA-g-PHO copolymer were carried out in a phosphate buffer saline (pH 7.4) medium. The hydrolytic degradation of the copolymer was strongly dependent on the degree of grafting (DG) of the PEGMA group. The degradation rate of the copolymer films in vitro increased with increasing DG of the PEGMA group on the PHO chain. The copolymer films showed a controlled delivery of ibuprofen to the medium in periods of time that depend on the composition, hydrophilic/hydrophobic characteristics, initial drug loading amount and film thickness of the graft copolymer support. The drug release rate from the grafted copolymer films was faster than the rate of weight loss of the films themselves. In particular, a combination of the low DG of the PEGMA group in the PHO chains with the low ibuprofen solubility in water led to long-term constant release from these matrices in vitro.     

Surface modification of chitosan films. Effects of hydrophobicity on protein adsorption

The surface of chitosan films was modified using acid chloride and acid anhydrides. Chemical composition at the film surface was analyzed by attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). ATR-FTIR data verified that the substitution took place at the amino groups of chitosan, thus forming amide linkages, and the modification proceeded to the depth at least 1 microm. Choices of molecules substituted at the amino groups of the glucosamine units did affect the hydrophobicity of the film surface, as indicated by air-water contact angle analysis. The surface became more hydrophobic than that of non-modified film when a stearoyl group (C(17)H(35)CO-) was attached to the films. The reaction of chitosan films with succinic anhydride or phthalic anhydride, however, produced more hydrophilic films. Selected modified films were subjected to protein adsorption study. The amount of protein adsorbed, determined by bicinchoninic acid (BCA) assay, related to the types of attached molecules. The improved surface hydrophobicity affected by the stearoyl groups promoted protein adsorption. In contrast, selective adsorption behavior was observed in the case of the chitosan films modified with anhydride derivatives. Lysozyme adsorption was enhanced by H-bonding and charge attraction with the hydrophilic surface. While the amount of albumin adsorbed was decreased possibly due to negative charges that gave rise to repulsion between the modified surface and albumin. This study has demonstrated that it is conceivable to fine-tune surface properties which influence its response to bio-macromolecules by heterogeneous chemical modification.     

Structures of pulmonary surfactant films adsorbed to an air-liquid interface in vitro

Phospholipid films can be preserved in vitro when adsorbed to a solidifiable hypophase. Suspensions of natural surfactant, lipid extract surfactants, and artificial surfactants were added to a sodium alginate solution and filled into a captive bubble surfactometer (CBS). Surfactant film was formed by adsorption to the bubble of the CBS for functional tests. There were no discernible differences in adsorption, film compressibility or minimal surface tension on quasi-static or dynamic compression for films formed in the presence or absence of alginate in the subphase of the bubble. The hypophase-film complex was solidified by adding calcium ions to the suspension with the alginate. The preparations were stained with osmium tetroxide and uranyl acetate for transmission electron microscopy. The most noteworthy findings are: (1) Surfactants do adsorb to the surface of the bubble and form osmiophilic lining layers. Pure DPPC films could not be visualized. (2) A distinct structure of a particular surfactant film depends on the composition and the concentration of surfactant in the bulk phase, and on whether or not the films are compressed after their formation. The films appear heterogeneous, and frequent vesicular and multi-lamellar film segments are seen associated with the interfacial films. These features are seen already upon film formation by adsorption, but multi-lamellar segments are more frequent after film compression. (3) The rate of film formation, its compressibility, and the minimum surface tension achieved on film compression appear to be related to the film structure formed on adsorption, which in turn is related to the concentration of the surfactant suspension from which the film is formed. The osmiophilic surface associated surfactant material seen is likely important for the surface properties and the mechanical stability of the surfactant film at the air-fluid interface.     

Self-assembled surfactant nano-structures important in drug delivery: a review

Role of self assembled structures as a vehicle is significant over the years. Their applications have been found for all routes of drug delivery. These micro and nano structures are containers loaded with drugs, ideal for targeted and sustained release of the drug. Drug efficacy depends on the drug loaded into the vehicle, temperature, drug solubility, pH, release characteristics, additives and most significantly, the vehicle morphology. This in turn suggests that the same vehicle cannot be used with high efficiency for all types of drugs and locations where the drug delivery has to take place. The status of various self assembled structures and their applications in drug delivery is reviewed in this communication.     

Electrostatic adsorption of heme proteins alternated with polyamidoamine dendrimers for layer-by-layer assembly of electroactive films

A novel thin film of heme proteins, including hemoglobin (Hb), myoglobin (Mb), and catalase (Cat), was successfully assembled layer by layer with polyamidoamine (PAMAM) dendrimers on different solid surfaces. At pH 7.0, protonated PAMAM possesses positive surface charges, whereas the proteins have net negative surface charges at pH above their isoelectric points. Thus, layer-by-layer {PAMAM/protein}(n)() films were assembled with alternate adsorption of oppositely charged PAMAM and proteins from their aqueous solutions mainly by electrostatic interaction. The assembly process was monitored by quartz crystal microbalance (QCM), UV-vis spectroscopy, and cyclic voltammetry (CV). The growth of the protein multilayer films was regular and linear, whereas the electroactivity of the films was only extended to a few bilayers. CVs of {PAMAM/protein}(n)() films showed a pair of well-defined and nearly reversible peaks characteristic of the protein heme Fe(III)/Fe(II) redox couples. Although {PAMAM/Hb}(n)() and {PAMAM/Mb}(n)() films showed very similar properties, {PAMAM/Cat}(n)() films displayed different and unique characters. The substrates with biological or environmental significance, such as oxygen, hydrogen peroxide, trichloroacetic acid, and nitrite, were catalytically reduced at {PAMAM/protein}(n)() film electrodes, showing the potential applicability of the films as new types of biosensors or bioreactors based on direct electrochemistry of the proteins. Both the electrochemical and electrocatalytic activity of {PAMAM/protein}(n)() films can be tailored precisely by controlling the number of bilayers or the film thickness.     

Study of novel rosin-based biomaterials for pharmaceutical coating

The film forming and coating properties of Glycerol ester of maleic rosin (GMR) and Pentaerythritol ester of maleic rosin (PMR) were investigated. The 2 rosin-based biomaterials were initially characterized in terms of their physicochemical properties, molecular weight (Mw), and glass transition temperature (Tg). Films were produced by solvent evaporation technique on a mercury substrate. Dibutyl sebacate plasticized and nonplasticized films were characterized by mechanical (tensile zzzz strength, percentage elongation, and Young's modulus), water vapor transmission (WVT), and moisture absorption parameters. Plasticization was found to increase film elongation and decrease the Young's modulus, making the films more flexible and thereby reducing the brittleness. Poor rates of WVT and percentage moisture absorption were demonstrated by various film formulations. Diclofenac sodium-layered pellets coated with GMR and PMR film formulations showed sustained drug release for up to 10 hours. The release rate was influenced by the extent of plasticization and coating level. The results obtained in the study demonstrate the utility of novel rosin-based biomaterials for pharmaceutical coating and sustained-release drug delivery systems.     

Protein microarrays on hybrid polymeric thin films prepared by self-assembly of polyelectrolytes for multiple-protein immunoassays

We report here the development and characterization of protein microarrays fabricated on nanoengineered 3-D polyelectrolyte thin films (PET) deposited on glass slide by consecutive adsorption of polyelectrolytes via self-assembly technique. Antibodies or antigens were immobilized in the PET-coated glass slides by electrostatic adsorption and entrapment of porous structure of the 3-D polymer film and thus establishing a platform for parallel analysis. Both antigen and antibody microarrays were fabricated on the PET-coated slides, and direct and indirect immunoassays on protein microarrays for multiple-analyte detection were demonstrated. Microarrays produced on these PET-coated slides have consistent spot morphology and provide performance features needed for proteomic analysis. The protein microarrays on the PET films provide LOD as low as 6 pg/mL and dynamic ranges up to three orders of magnitude, which are wider than the protein microarrays fabricated on aldehyde and poly-L-lysine functionalized slides. The PET films constructed by self-assembly technique in aqueous solution is green chemistry based, cost-effective method to generate 3-D thin film coatings on glass surface, and the coated slide is well suited for immobilizing many types of biological molecules so that a wide variety of microarray formats can be developed on this type of slide.     

A stereocomplex platform efficiently detecting antigen-antibody interactions

Ultrathin poly(methyl methacrylate) (PMMA) stereocomplex films with macromolecularly double-stranded regular nanostructures were prepared by layer-by-layer assembly of isotactic and syndiotactic PMMAs on solid surfaces. Antibodies were immobilized through the Fc region-capturing protein A, which had been physically adsorbed on the complex film, and the binding of antigens to immobilized antibodies was quantitatively investigated by the quartz crystal microbalance technique. Greater amounts of protein A with native forms were adsorbed on the complex film than those on conventional single-component PMMA films. Antibodies with high target-binding activities were also immobilized on the complex film. A greater amount of antigens could be detected on the complex film. The activity of protein A was maintained on the complex for a long time even within a dried state. The mechanism for the preservation of protein native forms on the complex surface was speculated by analyzing the physical adsorption of proteins with various secondary structures. Stereocomplex films can be utilized as novel coating nanomaterials for efficiently detecting protein-protein interactions.     

Chitosan-Based Mucoadhesive Systems for the Inclusion of the Echinochrome Active Substance

Polyelectrolyte complexes (PECs) of chitosan (CH) with kappa/beta carrageenan (κ/β-K), a polysaccharide of red algae, were obtained in a soluble form and as films. Using porcine intestinal mucosa as a model, it was shown that single-layer films obtained from polysaccharides and a three-layer film containing their polyelectrolyte complex exhibited mucoadhesive properties. The mucoadhesive ability of the films depended on the polysaccharide type and changed after PEC formation. Comparative analysis of the ζ-potential values determined for the soluble form of polyelectrolyte complexes in an aqueous solution and in a mucin-containing solution confirmed the mucoadhesive properties of the PECs. It was found that the complexes retained their mucoadhesive properties upon the inclusion of echinochrome A in their soluble form. This made it possible to consider them noninvasive forms of drug delivery.     

Polypeptide multilayer film co-delivers oppositely-charged drug molecules in sustained manners

The current state-of-the-art for drug-carrying biomedical devices is mostly limited to those that release a single drug. Yet there are many situations in which more than one therapeutic agent is needed. Also, most polyelectrolyte multilayer films intended for drug delivery are loaded with active molecules only during multilayer film preparation. In this paper, we present the integration of capsules as vehicles within polypeptide multilayer films for sustained release of multiple oppositely charged drug molecules using layer-by-layer nanoassembly technology. Calcium carbonate (CaCO(3)) particles were impregnated with polyelectrolytes, shelled with polyelectrolyte multilayers, and then assembled onto polypeptide multilayer films using glutaraldehyde. Capsule-integrated polypeptide multilayer films were obtained after decomposition of CaCO(3) templates. Two oppositely charged drugs were loaded into capsules within polypeptide multilayer films postpreparation based on electrostatic interactions between the drugs and the polyelectrolytes impregnated within capsules. We determined that the developed innovative capsule-integrated polypeptide multilayer films could be used to load multiple drugs of very different properties (e.g., opposite charges) any time postpreparation (e.g., minutes before surgical implantation inside an operating room), and such capsule-integrated films allowed simultaneous delivery of two oppositely charged drug molecules and a sustained (up to two weeks or longer) and sequential release was achieved.     

Tunable DNA release from cross-linked ultrathin DNA/PLL multilayered films

A novel ultrathin enzymatically degradable multilayered film using DNA as building blocks was fabricated by the layer-by-layer (LbL) technique. The UV-vis spectrometry and AFM experiments showed that the buildup of DNA and poly-L-lysine (PLL) was a kind of "exponentially growing films". The dye adsorption experiment suggested that the DNA molecules in the multilayered films were effectively protected by PLL. The films were further cross-linked by glutaraldehyde (GA). The cross-linking density of the films was modulated through the simple controlling of the time of the GA incubation process. An in vitro enzymatic degradation was carried out to investigate the DNA release profiles. The UV-vis spectrometry and fluorescence measurements indicated that the DNA release profiles were accordingly changed with the cross-linking density of the films. The nanoscale, easily processed enzymatically biodegradable PLL/DNA film with the ability to precisely control DNA release profiles may serve as a novel DNA delivery system, which may have great potential for gene therapy applications in implantable materials and biomedical devices.     

Comparative Evaluation of Porous Versus Nonporous Mucoadhesive Films as Buccal Delivery System of Glibenclamide

The present research work focused on the comparative assessment of porous versus nonporous films in order to develop a suitable buccoadhesive device for the delivery of glibenclamide. Both films were prepared by solvent casting technique using the 3² full factorial design, developing nine formulations (F1–F9). The films were evaluated for ex vivo mucoadhesive force, ex vivo mucoadhesion time, in vitro drug release (using a modified flow-through drug release apparatus), and ex vivo drug permeation. The mucoadhesive force, mucoadhesion time, swelling index, and tensile strength were observed to be directly proportional to the content of HPMC K4M. The optimized porous film (F4) showed an in vitro drug release of 84.47 ± 0.98%, ex vivo mucoadhesive force of 0.24 ± 0.04 N, and ex vivo mucoadhesion time of 539.11 ± 3.05 min, while the nonporous film (NF4) with the same polymer composition showed a release of 62.66 ± 0.87%, mucoadhesive force of 0.20 ± 0.05 N, and mucoadhesive time of 510 ± 2.00 min. The porous film showed significant differences for drug release and mucoadhesion time (p < 0.05) versus the nonporous film. The mechanism of drug release was observed to follow non-Fickian diffusion (0.1 < n < 0.5) for both porous and nonporous films. Ex vivo permeation studies through chicken buccal mucosa indicated improved drug permeation in porous films versus nonporous films. The present investigation established porous films to be a cost-effective buccoadhesive delivery system of glibenclamide.KEY WORDS: buccoadhesive drug delivery, glibenclamide, in vitro release and ex vivo permeation, porous film     

DNA affects the composition of lipoplex protein corona: a proteomics approach

The distribution of drug delivery systems into the body is affected by plasma proteins adsorbed onto their surface. Furthermore, an exact understanding of the structure and morphology of drug carriers is fundamental to understand their role as gene delivery systems. In this work, the adsorption of human plasma proteins bound to cationic liposomes and to their relative DNA lipoplexes was compared. A shotgun proteomics approach based on HPLC coupled to high resolution MS was used for an efficient identification of proteins adsorbed onto liposome and lipoplex surfaces. The distinct pattern of proteins adsorbed helps to better understand the DNA compaction process. The experimental evidence leads us to hypothesize that polyanionic DNA is associated to the lipoplex surface and can interact with basic plasma proteins. Such a finding is in agreement with recent results showing that lipoplexes are multilamellar DNA/lipid domains partially decorated with DNA at their surface. Proteomics experiments showed that the lipoplex corona is rich of biologically relevant proteins such as fibronectin, histones and complement proteins. Our results provide novel insights to understand how lipoplexes activate the immune system and why they are rapidly cleared from the blood stream. The differences in the protein adsorption data detected in the presented experiments could be the basis for the establishment of a correlation between protein adsorption pattern and in vivo fate of intravenously administered nanoparticles and will require some consideration in the future.     

Adhesion and growth of HUVEC endothelial cells on films of enzymatically functionalized chitosan with phenolic compounds

Human Umbilical Vein Endothelial Cell (HUVEC) growth on chitosan films and its enzymatically functionalized derivatives films with ferulic acid (FA) and ethyl ferulate (EF) was assessed by evaluating cell adhesion, morphology and cell viability. The results indicated that chitosan derivative films improved protein adsorption properties compared to chitosan films. The HUVEC cell morphology showed well attachment and spread phenotype on chitosan derivative films compared to those growing on chitosan films which did not spread and remained round. Evaluation of cell viability revealed improvement of cell adhesion on chitosan derivative films compared to chitosan film depending on the quantity of oxidized phenols grafted on chitosan. In addition, FA-/EF-chitosan films allowed almost similar cell adhesion. Furthermore, cell adhesion was increased with the film thickness. These results suggested that the oxidized phenols grafting on chitosan is a promising process to enhance cell adhesion, growth and creating useful functional biomaterials.