木质纤维素预处理技术研究进展

详细评述了木质纤维素的预处理工艺研究进展,特别是浓酸低温水解-酸回收工艺、稀酸二阶段水解工艺、金属离子在稀酸水解过程中的助催化作用以及水蒸汽爆裂、氨纤维爆裂、CO2爆裂、酶催化水解等方法的研究进展情况。木质纤维素原料预处理技术发展为发酵生产乙醇技术的研究开发奠定了坚实基础。     

Bioconversion of Lignocellulose into Bioethanol: Process Intensification and Mechanism Research

Biofuels produced from lignocellulosic biomass can significantly reduce the energy dependency on fossil fuels and the resulting effects on environment. In this respect, cellulosic ethanol as an alternative fuel has the potential to become a viable energy source in the near future. Over the past few decades, tremendous effort has been undertaken to make cellulosic ethanol cost competitive with conventional fossil fuels. The pretreatment step is always necessary to deconstruct the recalcitrant structures and to make cellulose more accessible to enzymes. A large number of pretreatment technologies involving physical, chemical, biological, and combined approaches have been developed and tested at the pilot scale. Furthermore, various strategies and methods, including multi-enzyme complex, non-catalytic additives, enzyme recycling, high solids operation, design of novel bioreactors, and strain improvement have also been implemented to improve the efficiency of subsequent enzymatic hydrolysis and fermentation. These technologies provide significant opportunities for lower total cost, thus making large-scale production of cellulosic ethanol possible. Meanwhile, many researchers have focused on the key factors that limit cellulose hydrolysis, and analyzing the reaction mechanisms of cellulase. This review describes the most recent advances on process intensification and mechanism research of pretreatment, enzymatic hydrolysis, and fermentation during the production of cellulosic ethanol.     

Fungal pretreatment of lignocellulosic biomass

Pretreatment is a crucial step in the conversion of lignocellulosic biomass to fermentable sugars and biofuels. Compared to thermal/chemical pretreatment, fungal pretreatment reduces the recalcitrance of lignocellulosic biomass by lignin-degrading microorganisms and thus potentially provides an environmentally-friendly and energy-efficient pretreatment technology for biofuel production. This paper provides an overview of the current state of fungal pretreatment by white rot fungi for biofuel production. The specific topics discussed are: 1) enzymes involved in biodegradation during the fungal pretreatment; 2) operating parameters governing performance of the fungal pretreatment; 3) the effect of fungal pretreatment on enzymatic hydrolysis and ethanol production; 4) efforts for improving enzymatic hydrolysis and ethanol production through combinations of fungal pretreatment and physical/chemical pretreatment; 5) the treatment of lignocellulosic biomass with lignin-degrading enzymes isolated from fungal pretreatment, with a comparison to fungal pretreatment; 6) modeling, reactor design, and scale-up of solid state fungal pretreatment; and 7) the limitations and future perspective of this technology.     

Expression of Trichoderma reesei β-mannanase in tobacco chloroplasts and its utilization in lignocellulosic woody biomass hydrolysis

Lignocellulosic ethanol offers a promising alternative to conventional fossil fuels. One among the major limitations in the lignocellulosic biomass hydrolysis is unavailability of efficient and environmentally biomass degrading technologies. Plant-based production of these enzymes on large scale offers a cost-effective solution. Cellulases, hemicellulases including mannanases and other accessory enzymes are required for conversion of lignocellulosic biomass into fermentable sugars. β-mannanase catalyzes endo-hydrolysis of the mannan backbone, a major constituent of woody biomass. In this study, the man1 gene encoding β-mannanase was isolated from Trichoderma reesei and expressed via the chloroplast genome. PCR and Southern hybridization analysis confirmed site-specific transgene integration into the tobacco chloroplast genomes and homoplasmy. Transplastomic plants were fertile and set viable seeds. Germination of seeds in the selection medium showed inheritance of transgenes into the progeny without any Mendelian segregation. Expression of endo-β-mannanase for the first time in plants facilitated its characterization for use in enhanced lignocellulosic biomass hydrolysis. Gel diffusion assay for endo-β-mannanase showed the zone of clearance confirming functionality of chloroplast-derived mannanase. Endo-β-mannanase expression levels reached up to 25 units per gram of leaf (fresh weight). Chloroplast-derived mannanase had higher temperature stability (40 °C to 70 °C) and wider pH optima (pH 3.0 to 7.0) than E.coli enzyme extracts. Plant crude extracts showed 6-7 fold higher enzyme activity than E.coli extracts due to the formation of disulfide bonds in chloroplasts, thereby facilitating their direct utilization in enzyme cocktails without any purification. Chloroplast-derived mannanase when added to the enzyme cocktail containing a combination of different plant-derived enzymes yielded 20% more glucose equivalents from pinewood than the cocktail without mannanase. Our results demonstrate that chloroplast-derived mannanase is an important component of enzymatic cocktail for woody biomass hydrolysis and should provide a cost-effective solution for its diverse applications in the biofuel, paper, oil, pharmaceutical, coffee and detergent industries.     

Modeling cellulase kinetics on lignocellulosic substrates

The enzymatic hydrolysis of cellulose to glucose by cellulases is one of the major steps involved in the conversion of lignocellulosic biomass to yield biofuel. This hydrolysis by cellulases, a heterogeneous reaction, currently suffers from some major limitations, most importantly a dramatic rate slowdown at high degrees of conversion. To render the process economically viable, increases in hydrolysis rates and yields are necessary and require improvement both in enzymes (via protein engineering) and processing, i.e. optimization of reaction conditions, reactor design, enzyme and substrate cocktail compositions, enzyme recycling and recovery strategies. Advances in both areas in turn strongly depend on the progress in the accurate quantification of substrate–enzyme interactions and causes for the rate slowdown. The past five years have seen a significant increase in the number of studies on the kinetics of the enzymatic hydrolysis of cellulose. This review provides an overview of the models published thus far, classifies and tabulates these models, and presents an analysis of their basic assumptions. While the exact mechanism of cellulases on lignocellulosic biomass is not completely understood yet, models in the literature have elucidated various factors affecting the enzymatic rates and activities. Different assumptions regarding rate-limiting factors and basic substrate–enzyme interactions were employed to develop and validate these models. However, the models need to be further tested against additional experimental data to validate or disprove any underlying hypothesis. It should also provide better insight on additional parameters required in the case that more substrate and enzyme properties are to be included in a model.     

Inhibition of cellulose enzymatic hydrolysis by laccase‐derived compounds from phenols

The presence of inhibitors compounds after pretreatment of lignocellulosic materials affects the saccharification and fermentation steps in bioethanol production processes. Even though, external addition of laccases selectively removes the phenolic compounds from lignocellulosic prehydrolysates, when it is coupled to saccharification step, lower hydrolysis yields are attained. Vanillin, syringaldehyde and ferulic acid are phenolic compounds commonly found in wheat‐straw prehydrolysate after steam‐explosion pretreatment. These three phenolic compounds were used in this study to elucidate the inhibitory mechanisms of laccase‐derived compounds after laccase treatment. Reaction products derived from laccase oxidation of vanillin and syringaldehyde showed to be the strongest inhibitors. The presence of these products causes a decrement on enzymatic hydrolysis yield of a model cellulosic substrate (Sigmacell) of 46.6 and 32.6%, respectively at 24 h. Moreover, a decrease in more than 50% of cellulase and β‐glucosidase activities was observed in presence of laccase and vanillin. This effect was attributed to coupling reactions between phenoxyl radicals and enzymes. On the other hand, when the hydrolysis of Sigmacell was performed in presence of prehydrolysate from steam‐exploded wheat straw a significant inhibition on enzymatic hydrolysis was observed independently of laccase treatment. This result pointed out that the other components of wheat‐straw prehydrolysate are affecting the enzymatic hydrolysis to a higher extent than the possible laccase‐derived products. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:700–706, 2015     

Liberation of fermentable sugars from soybean hull biomass using ionic liquid 1‐butyl‐3‐methylimidazolium acetate and their bioconversion to ethanol

Optimized hydrolysis of lignocellulosic waste biomass is essential to achieve the liberation of sugars to be used in fermentation process. Ionic liquids (ILs), a new class of solvents, have been tested in the pretreatment of cellulosic materials to improve the subsequent enzymatic hydrolysis of the biomass. Optimized application of ILs on biomass is important to advance the use of this technology. In this research, we investigated the effects of using 1‐butyl‐3‐methylimidazolium acetate ([bmim][Ac]) on the decomposition of soybean hull, an abundant cellulosic industrial waste. Reaction aspects of temperature, incubation time, IL concentration, and solid load were optimized before carrying out the enzymatic hydrolysis of this residue to liberate fermentable glucose. Optimal conditions were found to be 75°C, 165 min incubation time, 57% (mass fraction) of [bmim][Ac], and 12.5% solid loading. Pretreated soybean hull lost its crystallinity, which eased enzymatic hydrolysis, confirmed by Fourier Transform Infrared analysis. The enzymatic hydrolysis of the biomass using an enzyme complex from Penicillium echinulatum liberated 92% of glucose from the cellulose matrix. The hydrolysate was free of any toxic compounds, such as hydroxymethylfurfural and furfural. The obtained hydrolysate was tested for fermentation using Candida shehatae HM 52.2, which was able to convert glucose to ethanol at yields of 0.31. These results suggest the possible use of ILs for the pretreatment of some lignocellulosic waste materials, avoiding the formation of toxic compounds, to be used in second‐generation ethanol production and other fermentation processes. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:312–320, 2016     

Restriction of the enzymatic hydrolysis of steam-pretreated spruce by lignin and hemicellulose

The presence of lignin is known to reduce the efficiency of the enzymatic hydrolysis of lignocellulosic raw materials. On the other hand, solubilization of hemicellulose, especially of xylan, is known to enhance the hydrolysis of cellulose. The enzymatic hydrolysis of spruce, recognized among the most challenging lignocellulosic substrates, was studied by commercial and purified enzymes from Trichoderma reesei. Previously, the enzymatic hydrolysis of steam pretreated spruce has been studied mainly by using commercial enzymes and no efforts have been taken to clarify the bottlenecks by using purified enzyme components.Steam-pretreated spruce was hydrolyzed with a mixture of Celluclast and Novozym 188 to obtain a hydrolysis residue, expectedly containing the most resistant components. The pretreated raw material and the hydrolysis residue were analyzed for the enrichment of structural bottlenecks during the hydrolysis. Lignin was removed from these two materials with chlorite delignification method in order to eliminate the limitations caused by lignin. Avicel was used for comparison as a known model substrate. Mixtures of purified enzymes were used to investigate the hydrolysis of the individual carbohydrates: cellulose, glucomannan and xylan in the substrates. The results reveal that factors limiting the hydrolysis are mainly due to the lignin, and to a minor extent by the lack of accessory enzymes. Removal of lignin doubled the hydrolysis degree of the raw material and the residue, and reached close to 100% of the theoretical within 2 days. The presence of xylan seems to limit the hydrolysability, especially of the delignified substrates. The hydrolysis results also revealed significant hemicellulose impurities in the commonly used cellulose model substrate, making it questionable to use Avicel as a model cellulose substrate for hydrolysis experiments.     

Effect of periodic high-frequency vibration with rigid spheres added on high solids enzymatic hydrolysis of steam-exploded corn straw

The periodic low-frequency force can improve mixing efficiency and reduce water constraint, thus intensifying the high solids enzymatic hydrolysis. However, the availability of intensification methods for the periodic force with different frequencies needs to be studied. The periodic high-frequency vibration with rigid spheres added as another intensification method was proposed to shorten the time of water constraint and improve efficiency. Within this study, glucan and xylan conversions in periodic high-frequency vibration with rigid spheres added enzymatic hydrolysis (PVEH) increased by 8.3%-35% and 5.0%-33.5%, respectively, with solid loading increasing from 15% to 25%, compared with those in static state enzymatic hydrolysis (SEH). The physical properties variations of substrate indirectly proved the higher efficiency of PVEH. Based on the change regularity of constrained water release, PVEH was divided into three stages. The effects of micromixing and macromixing in three stages were analyzed. Additionally, the efficiency of high solids enzymatic hydrolysis can be enhanced by using proper intensification methods in different stages.     

Advancements and future directions in enzyme technology for biomass conversion

Enzymatic hydrolysis of pre-treated lignocellulosic biomass is an ideal alternative to acid hydrolysis for bio-ethanol production, limited primarily by pre-treatment requirements and economic considerations arising from enzyme production costs and specific activities. The quest for cheaper and better enzymes has prompted years of bio-prospecting, strain optimization through genetic engineering, enzyme characterization for simple and complex lignocellulosic feedstock, and the development of pre-treatment strategies to mitigate inhibitory effects. The recent shift to systematic characterizations of de novo mixtures of purified proteins is a promising indicator of maturation within this field of study, facilitating progression towards feedstock assay-based rapid enzyme mixture optimization. It is imperative that international standards be developed to enable meaningful comparisons between these studies and the construction of a database of enzymatic activities and kinetics, aspects of which are explored here-in. Complementary efforts to improve the economic viability of enzymatic hydrolysis through process integration and reactor design are also considered, where membrane-confinement shows significant promise despite the associated technological challenges. Significant advancements in enzyme technology towards the economic conversion of lignocellulosic biomass should be expected within the next few years as systematic research in enzyme activities conforms to that of traditional reaction engineering.     

Reactor design for minimizing product inhibition during enzymatic lignocellulose hydrolysis: I. Significance and mechanism of cellobiose and glucose inhibition on cellulolytic enzymes

Achievement of efficient enzymatic degradation of cellulose to glucose is one of the main prerequisites and one of the main challenges in the biological conversion of lignocellulosic biomass to liquid fuels and other valuable products. The specific inhibitory interferences by cellobiose and glucose on enzyme-catalyzed cellulose hydrolysis reactions impose significant limitations on the efficiency of lignocellulose conversion — especially at high-biomass dry matter conditions. To provide the base for selecting the optimal reactor conditions, this paper reviews the reaction kinetics, mechanisms, and significance of this product inhibition, notably the cellobiose and glucose inhibition, on enzymatic cellulose hydrolysis. Particular emphasis is put on the distinct complexity of cellulose as a substrate, the multi-enzymatic nature of the cellulolytic degradation, and the particular features of cellulase inhibition mechanisms and kinetics. The data show that new strategies that place the bioreactor design at the center stage are required to alleviate the product inhibition and in turn to enhance the efficiency of enzymatic cellulose hydrolysis. Accomplishment of the enzymatic hydrolysis at medium substrate concentration in separate hydrolysis reactors that allow continuous glucose removal is proposed to be the way forward for obtaining feasible enzymatic degradation in lignocellulose processing.     

Biological pretreatment of corn stover with Phlebia brevispora NRRL‐13108 for enhanced enzymatic hydrolysis and efficient ethanol production

Biological pretreatment of lignocellulosic biomass by white‐rot fungus can represent a low‐cost and eco‐friendly alternative to harsh physical, chemical, or physico‐chemical pretreatment methods to facilitate enzymatic hydrolysis. In this work, solid‐state cultivation of corn stover with Phlebia brevispora NRRL‐13018 was optimized with respect to duration, moisture content and inoculum size. Changes in composition of pretreated corn stover and its susceptibility to enzymatic hydrolysis were analyzed. About 84% moisture and 42 days incubation at 28°C were found to be optimal for pretreatment with respect to enzymatic saccharification. Inoculum size had little effect compared to moisture level. Ergosterol data shows continued growth of the fungus studied up to 57 days. No furfural and hydroxymethyl furfural were produced. The total sugar yield was 442 ± 5 mg/g of pretreated corn stover. About 36 ± 0.6 g ethanol was produced from 150 g pretreated stover per L by fed‐batch simultaneous saccharification and fermentation (SSF) using mixed sugar utilizing ethanologenic recombinant Eschericia coli FBR5 strain. The ethanol yields were 32.0 ± 0.2 and 38.0 ± 0.2 g from 200 g pretreated corn stover per L by fed‐batch SSF using Saccharomyces cerevisiae D5A and xylose utilizing recombinant S. cerevisiae YRH400 strain, respectively. This research demonstrates that P. brevispora NRRL‐13018 has potential to be used for biological pretreatment of lignocellulosic biomass. This is the first report on the production of ethanol from P. brevispora pretreated corn stover. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:365–374, 2017     

Particle concentration and yield stress of biomass slurries during enzymatic hydrolysis at high‐solids loadings

Effective and efficient breakdown of lignocellulosic biomass remains a primary barrier for its use as a feedstock for renewable transportation fuels. A more detailed understanding of the material properties of biomass slurries during conversion is needed to design cost‐effective conversion processes. A series of enzymatic saccharification experiments were performed with dilute acid pretreated corn stover at initial insoluble solids loadings of 20% by mass, during which the concentration of particulate solids and the rheological property yield stress (τ_y) of the slurries were measured. The saccharified stover liquefies to the point of being pourable (τ_y ≤ 10 Pa) at a total biomass conversion of about 40%, after roughly 2 days of saccharification for a moderate loading of enzyme. Mass balance and semi‐empirical relationships are developed to connect the progress of enzymatic hydrolysis with particle concentration and yield stress. The experimental data show good agreement with the proposed relationships. The predictive models developed here are based on established physical principles and should be applicable to the saccharification of other biomass systems. The concepts presented, especially the ability to predict yield stress from extent of conversion, will be helpful in the design and optimization of enzymatic hydrolysis processes that operate at high‐solids loadings. Biotechnol. Bioeng. 2009; 104: 290–300 © 2009 Wiley Periodicals, Inc.     

An effective chemical pretreatment method for lignocellulosic biomass with substituted imidazoles

Lignocellulosic biomass is the most abundant naturally renewable organic resource for biofuel production. Because of its recalcitrance to enzymatic degradation, pretreatment is a crucial step before hydrolysis of the feedstock. A variety of pretreatment methods have been developed and intensively studied to achieve optimal yield without imposing significant adverse impact on the environment. Herein, we present a novel chemical pretreatment method using substituted heterocycles with low temperature and short residence time requirements. 1‐Methylimidazole (MI) is a precursor to some imidazolium‐based ionic liquids. In this study, its potential utilization as a biomass pretreatment agent is being investigated for the first time. At mild conditions, such as 25°C for 5 min at ambient pressure, a substantial increase in the hydrolysis rate throughout the entire course of conversion for cellulose substrate was obtained. Furthermore, the pretreatment effectiveness of MI on both untreated and steam‐exploded lignocellulosic biomass including loblolly pine, switchgrass, and sugarcane bagasse has been studied and MI was found to be an efficient delignifier. Remarkable rate enhancement was also observed for the non‐woody lignocellulosic substrates after a short period of MI pretreatment at ambient conditions. The mechanism of MI pretreatment is explored through analysis of cellulose physical properties including crystallinity index, degree of polymerization, accessibility, and lignin dissolution quantification. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 31:25–34, 2015     

Scale-up and integration of alkaline hydrogen peroxide pretreatment, enzymatic hydrolysis, and ethanolic fermentation

Alkaline hydrogen peroxide (AHP) has several attractive features as a pretreatment in the lignocellulosic biomass‐to‐ethanol pipeline. Here, the feasibility of scaling‐up the AHP process and integrating it with enzymatic hydrolysis and fermentation was studied. Corn stover (1 kg) was subjected to AHP pretreatment, hydrolyzed enzymatically, and the resulting sugars fermented to ethanol. The AHP pretreatment was performed at 0.125 g H₂O₂/g biomass, 22°C, and atmospheric pressure for 48 h with periodic pH readjustment. The enzymatic hydrolysis was performed in the same reactor following pH neutralization of the biomass slurry and without washing. After 48 h, glucose and xylose yields were 75% and 71% of the theoretical maximum. Sterility was maintained during pretreatment and enzymatic hydrolysis without the use of antibiotics. During fermentation using a glucose‐ and xylose‐utilizing strain of Saccharomyces cerevisiae, all of the Glc and 67% of the Xyl were consumed in 120 h. The final ethanol titer was 13.7 g/L. Treatment of the enzymatic hydrolysate with activated carbon prior to fermentation had little effect on Glc fermentation but markedly improved utilization of Xyl, presumably due to the removal of soluble aromatic inhibitors. The results indicate that AHP is readily scalable and can be integrated with enzyme hydrolysis and fermentation. Compared to other leading pretreatments for lignocellulosic biomass, AHP has potential advantages with regard to capital costs, process simplicity, feedstock handling, and compatibility with enzymatic deconstruction and fermentation. Biotechnol. Bioeng. 2012; 109:922–931. © 2011 Wiley Periodicals, Inc.     

Application of high throughput pretreatment and co‐hydrolysis system to thermochemical pretreatment. Part 1: Dilute acid

Because conventional approaches for evaluating sugar release from the coupled operations of pretreatment and enzymatic hydrolysis are extremely time and material intensive, high throughput (HT) pretreatment and enzymatic hydrolysis systems have become vital for screening large numbers of lignocellulosic biomass samples to identify feedstocks and/or processing conditions that significantly improve performance and lower costs. Because dilute acid pretreatment offers many important advantages in rendering biomass highly susceptible to subsequent enzymatic hydrolysis, a high throughput pretreatment and co‐hydrolysis (HTPH) approach was extended to employ dilute acid as a tool to screen for enhanced performance. First, a single‐step neutralization and buffering method was developed to allow effective enzymatic hydrolysis of the whole pretreated slurry. Switchgrass and poplar were then pretreated with 0.5% and 1% acid loadings at a 5% solids concentration, the resulting slurry conditioned with the buffering approach, and the entire mixture enzymatically hydrolyzed. The resulting sugar yields demonstrated that single‐step neutralizing and buffering was capable of adjusting the pH as needed for enzymatic saccharification, as well as overcoming enzyme inhibition by compounds released in pretreatment. In addition, the effects of pretreatment conditions and biomass types on susceptibility of pretreated substrates to enzymatic conversion were clearly discernible, demonstrating the method to be a useful extension of HTPH systems. Biotechnol. Bioeng. 2013; 110: 754–762. © 2012 Wiley Periodicals, Inc.     

Pretreatments for Enhanced Enzymatic Hydrolysis of Pinewood: a Review

Pinewood is an abundant source of lignocellulosic biomass that has potential to be used as renewable feedstock in biorefineries for conversion into advanced biofuels and other value-added chemicals. However, its structural recalcitrance, due to the compact packing of its major components, viz. cellulose, hemicellulose and lignin, high lignin content, and high cellulose crystallinity, is a major bottleneck in its widespread use as a biorefinery feedstock. Typical chemical, thermal, and biological pretreatment technologies are aimed at removing lignin and hemicellulose fractions for improving enzyme accessibility and digestibility of cellulose. This review highlights common pine pretreatment procedures, associated key parameters and resulting enzymatic hydrolysis yields. The challenges and limitations are also discussed as well as potential strategies to overcome them, providing an essential source of information to realize pine as a compelling biorefinery biomass source.     

木质纤维素原料酶水解产乙醇工艺的研究进展

木质纤维素原料预处理后,经水解、发酵等过程,可生产乙醇作为清洁燃料,这大大提高了农业和林业废弃物的利用率,减轻了环境污染,并为经济的可持续发展提供了保证。目前木质纤维素酶水解因其具有明显优势而受到重视,被普遍研究和采用。综述了近年来木质纤维素原料的预处理方法、酶与水解技术、发酵工艺以及发酵耦合分离技术的最新研究成果。     

Co‐hydrolysis of lignocellulosic biomass for microbial lipid accumulation

The herbaceous perennial energy crops miscanthus, giant reed, and switchgrass, along with the annual crop residue corn stover, were evaluated for their bioconversion potential. A co‐hydrolysis process, which applied dilute acid pretreatment, directly followed by enzymatic saccharification without detoxification and liquid–solid separation between these two steps was implemented to convert lignocellulose into monomeric sugars (glucose and xylose). A factorial experiment in a randomized block design was employed to optimize the co‐hydrolysis process. Under the optimal reaction conditions, corn stover exhibited the greatest total sugar yield (glucose + xylose) at 0.545 g g^?1 dry biomass at 83.3% of the theoretical yield, followed by switch grass (0.44 g g^?1 dry biomass, 65.8% of theoretical yield), giant reed (0.355 g g^?1 dry biomass, 64.7% of theoretical yield), and miscanthus (0.349 g g^?1 dry biomass, 58.1% of theoretical yield). The influence of combined severity factor on the susceptibility of pretreated substrates to enzymatic hydrolysis was clearly discernible, showing that co‐hydrolysis is a technically feasible approach to release sugars from lignocellulosic biomass. The oleaginous fungus Mortierella isabellina was selected and applied to the co‐hydrolysate mediums to accumulate fungal lipids due to its capability of utilizing both C5 and C6 sugars. Fungal cultivations grown on the co‐hydrolysates exhibited comparable cell mass and lipid production to the synthetic medium with pure glucose and xylose. These results elucidated that combining fungal fermentation and co‐hydrolysis to accumulate lipids could have the potential to enhance the utilization efficiency of lignocellulosic biomass for advanced biofuels production. Biotechnol. Bioeng. 2013; 110: 1039–1049. © 2012 Wiley Periodicals, Inc.