Conditions affecting cell surface properties of human intestinal bifidobacteria

The cell surface properties of human intestinal bifidobacteria have been characterized for 30 strains isolated from a fecal sample. Strain identification to the species level was obtained by restriction analysis of the amplified 16S rRNA gene and confirmed by DNA/DNA reassociation experiments. The isolates were grouped in four genetically homogeneous clusters whose members belonged to Bifidobacterium bifidum, Bifidobacterium adolescentis, Bifidobacterium longum and Bifidobacterium pseudocatenulatum species. Cell surface properties of Bifidobacterium strains were evaluated by determining the level of hydrophobicity, adhesion to hydrocarbons and contact angle measurements, and their autoaggregation ability. The results showed high and homogeneous level of hydrophobicity in all tested strains when contact angle measurements values were considered. On the contrary, autoaggregation assays and bacterial adhesion to hydrocarbons detected interesting differences in cell surface properties among the tested Bifidobacterium strains. The highest levels of autoaggregation, detected in B. bifidum and B. adolescentis strains, were strictly dependent on the pH of the medium. Moreover, protease treatment experiments suggested that proteins had a key role in the autoaggregating ability of B. bifidum and B. adolescentis strains.     

The effect of cell surface components on adhesion ability of Lactobacillus rhamnosus

The aim of this study was to analyze the cell envelope components and surface properties of two phenotypes of Lactobacillus rhamnosus isolated from the human gastrointestinal tract. The ability of the bacteria to adhere to human intestinal cells and to aggregate with other bacteria was determined. L. rhamnosus strains E/N and PEN differed with regard to the presence of exopolysaccharides (EPS) and specific surface proteins. Transmission electron microscopy showed differences in the structure of the outer cell surface of the strains tested. Bacterial surface properties were analyzed by Fourier transform infrared spectroscopy, fatty acid methyl esters and hydrophobicity assays. Aggregation capacity and adhesion of the tested strains to the human colon adenocarcinoma cell line HT29 was determined. The results indicated a high adhesion and aggregation ability of L. rhamnosus PEN, which possessed specific surface proteins, had a unique fatty acid content, and did not synthesize EPS. Adherence of L. rhamnosus was dependent on specific interactions and was promoted by surface proteins (42–114 kDa) and specific fatty acids. Polysaccharides likely hindered bacterial adhesion and aggregation by masking protein receptors. This study provides information on the cell envelope constituents of lactobacilli that influence bacterial aggregation and adhesion to intestinal cells. This knowledge will help to understand better their specific contribution in commensal–host interactions and adaptation to this ecological niche.     

Effects of cell surface damage on surface properties and adhesion of Pseudomonas aeruginosa

Bacterial cell surfaces play a crucial role in their adhesion to surfaces. In the present study, physico-chemical cell surface properties of Pseudomonas aeruginosa, isolated from a case of contact lens associated keratitis, are determined for mid-exponential and early stationary phase cells and for cells after exposure to a lens care solution or after mechanical damage by sonication. Exposure to a lens care solution and mechanical cell surface damage reduced the cell surface hydrophobicity and water contact angles decreased from 129 degrees to 96 degrees and 83 degrees, respectively. Zeta potentials in saline (-9 mV) were hardly affected after mechanical damage, but tri-modal zeta potential distributions, with subpopulation zeta potentials at -11, -28 and -41 mV, were observed after exposure of bacteria to a lens care solution. X-ray photoelectron spectroscopy indicated changes in the amounts of oxygen-, nitrogen- and phosphorus-rich cell surface components. Mid-exponential phase cells had more nitrogen-rich cell surface components than early stationary phase cells, but water contact angles and zeta potentials were not very different. In addition, mid-exponential phase cells adhered better than early stationary phase cells to hydrophobic and hydrophilic substrata in a parallel plate flow chamber. The capacity of P. aeruginosa to adhere was decreased after inflicting cell surface damage. Exposure to a lens care solution yielded a larger reduction in adhesion capacity than sonication, likely because sonication left most of the cells in a viable state, in contrast to exposure to a lens care solution. It is argued that for clinically relevant experiments, it may be preferable to work with surface damaged cells rather than with gently harvested organisms.     

In vitro effects of bovine lactoferrin on autoaggregation ability and surface hydrophobicity of bifidobacteria

Changes in autoaggregation ability and surface hydrophobicity of bifidobacteria with addition of bovine lactoferrin in liquid media were investigated. Lactoferrin addition caused loss of autoaggregation ability, disappearance of microscopic clusters and produced consistent turbidity in the cultured medium compared with control. Similar outcomes with addition of bovine lactoferrin hydrolysates (pepsin), bovine transferrin or ovotransferrin suggested that the effect is not lactoferrin-specific. On the other hand, addition of proteins, except bovine transferrin, did not alter surface hydrophobicity. These results indicate that one or more surface components involved in autoaggregation of bifidobacteria are proteins.     

Effect of bile on the lipid composition and surface properties of bifidobacteria

AIM: The changes produced on the bacterial surface of Bifidobacteria cells when they are grown in bile were compared with those provoked by bile added to bacteria grown in the absence of bile. METHODS AND RESULTS: The adhesive properties, the zeta potential and the lipid composition of Bifidobacterial strains, isolated from human faeces and grown in MRS medium, were determined. Bacteria grown in MRS with bile showed a loss of adherence and autoaggregation in correlation with a decrease in the surface hydrophobicity in comparison to those grown in MRS without bile, concomitant with the absence of two glycolipids, the increase of sugar content and minor changes in fatty acid composition. The surface changes caused by bile shock on bacteria grown in bile-free medium were much less pronounced and, in addition, no effect on the lipid composition was apparent. CONCLUSIONS: The comparison of the results indicates that bile action on surface properties is related to metabolic changes. SIGNIFICANCE AND IMPACT OF THE STUDY: Long-term exposure of bacteria to bile may cause metabolic changes affecting their adhesive properties irreversibly. This may be taken as a criterion to define the probiotic properties of different strains.     

Influence of surface cell structures on physicochemical properties of Escherichia coli

The partition of cells in a polyethylene glycol-dextran two phase system was used to compare the relative hydrophobicity of E. coli strains expressing different surface structures. The role of fimbriae and surface antigens on the behavior partition was investigated. The strains expressing PAP fimbriae and/or O-antigen showed a higher surface hydrophobicity than strains which express only type 1 fimbriae and/or R-antigen. No relation was found between K and H antigen and hydrophobicity measurements. The influence of surface structures on electrophoretic mobility has been evaluated. The polysaccharide capsules of AL 213 and AL 499 strains generated a high EPM. For non capsulated E. coli the EPM of rough strains (AL 46, 382) is higher than smooth strain (AL52).     

Assessment of cell surface properties and adhesion potential of selected probiotic strains

Aim:  To evaluate the physicochemical cell surface and adhesive properties of selected probiotic strains for human use.
Methods and Results:  Probiotic strains, Bifidobacterium longum B6, Lactobacillus acidophilus ADH, Lactobacillus paracasei , Lactobacillus rhamnosus GG, Lactobacillus brevis , Lactobacillus casei , Leuconostoc mesenteroides and Pediococcus acidilactici were tested for the physicochemical properties of cell surfaces and the adhesion abilities against foodborne pathogens. Bif .  longum B6 (53·6%) and Lact .  rhamnosus GG (46·5%) showed the highest hydrophobicity, while the least affinity to xylene was observed in Ped .  acidilactici (10·4%). Bifidobacterium longum B6 showed the strongest coaggregation phenotype with Listeria monocytogenes (53·0%), Shigella boydii (42·0%) and Staphylococcus aureus (45·9%). Lactobacillus rhamnosus GG had the strong binding ability to Caco-2 cells and effectively inhibited the adhesion of L .  monocytogenes , Salmonella Typhimurium, Sh .  boydii and Staph .  aureus to Caco-2 cells. The hydrophobicity was highly correlated with coaggregative abilities and competitive inhibition, suggesting a good relationship between in vitro adhesion and in vivo colonization.
Conclusion:  The results suggest that Bif .  longum B6 and Lact .  rhamnosus GG can be candidate probiotics available for human consumption.
Significance and Impact of the Study:  Because the use of probiotic strains has been more concerned with their beneficial effects in the GI tract, it is essential to examine the potential of probiotic strains based on the physicochemical properties in terms of bacterial-binding and adhesion capabilities.     

Effects on interfacial properties and cell adhesion of surface modification by pectic hairy regions

Polystyrene Petri dishes, aminated by a plasma deposition process, were surface modified by the covalent linking of two different enzymatically modified hairy regions (HRs) from pectin containing, for example, rhamnogalacturonan-I and xylogalacturonan structural elements. The two polysaccharide preparations share the same structural elements of apple pectin, but the relative amounts and lengths of the neutral side chains present differ. Surface analysis by X-ray photoelectron spectroscopy, contact angle measurement, and atomic force microscope (AFM) force-separation curves was used to characterize the effects on surface chemistry and interfacial forces of the surface modification process. Cell adhesion experiments using continuous L-929 fibroblasts and primary aortic smooth muscle cells were performed to evaluate the effect of the polysaccharide nature on cell adhesion. Results show that immobilization of the HR affects the interfacial field of forces and the cell behavior: "equilibrium" contact angles, obtained by a recently introduced vibrational approach, decrease after HR immobilization reaching a value close to 20 degrees . AFM force-separation curves show a more extended (or softer) interface in the case of the HR bearing longer side chains. Accordingly, depending on the HR preparation, cells shifted from spread morphology and adhesion behavior quantitatively comparable to that observed on conventional tissue culture polystyrene to rounded morphology and significantly lower adhesion. These data show that engineering of plant pectins can be a valuable tool to prepare novel and finely tuned polysaccharides having different chemico-physical and biological properties, to be used in the surface modification of medical devices and materials.     

Influence of flow velocity and cell concentration on dynamic adhesion of erythrocytes to glass surface

Comparative studies were carried out on dynamic adhesion of 51Cr-labelled erythrocytes to the surface of glass beads in the presence of serum in the medium (50 microng of protein/ml) and in protein-free medium. The influence of cell concentration (within the range 4 X 10(5) to 8 X 10(6)/ml) and of cellular flow velocity (within the range 1.5-0.4 cm/min) on the value of adhesion was investigated. It was found that when serum was present in the medium, the decisive influence on erythrocyte adhesion was exerted by the velocity with which the cells pass though the glass bead layer. Cell concentration under these conditions has only a very slight effect. When the medium does not contain serum, erythrocyte adhesion to the bead layer seems to depend on both cell concentration and flow velocity. Preliminary data were obtained concerning the release of 51Cr from the bead layer after erythrocyte adhesion.     

Influence of sialic acid on cell surface properties in I-cell disease fibroblasts

Summary Fibroblasts derived from patients with I-cell disease have been shown to accumulate many natural substrates including a three to fourfold increase in sialic acid content compared to that found in normal fibroblasts. This diverse accumulation of storage material is due to a massive deficiency of multiple lysosomal hydrolases as they are preferentially excreted into the culture fluid. There is evidence that the I-cell plasma membrane itself is abnormal with respect to certain transferase activities and in its sensitivity to freezing and Triton X-100. In this study, we have shown that a neuraminidase-sensitive substrate, and perhaps others in I-cell fibroblasts, contribute to an increased electronegativity of the I-cell fibroblast surface and to the cells' sensitivity to freezing. We also found that neuraminidase treatment of I-cell fibroblasts before preservative freezing in liquid nitrogen enables the cells to adapt more easily to subculture upon thawing. This project was supported in part by National Institutes of Health (NIH) BRSG Grant RR-05493, NIH Grant 1-R01-HD-11453-01-A1, National Science Foundation Grant PCM 77-05733, and Maternal and Child Health Service Project 417. Georgirene D. Vladutiu is the recipient of Research Career Development Award 1K04 HD 00312-01A1 from the National Institutes of Health.     

Influence of growth and environmental conditions on cell surface hydrophobicity of Pseudomonas fluorescens in non-specific adhesion

The relative cell surface hydrophobicity (CSH) of 18 soil isolates of Pseudomonas fluorescens, determined by phase exclusion, hydrophobic interaction chromatography (HIC), electrostatic interaction chromatography (ESIC), and contact angle, revealed large degrees of variability. Variation in the adhesion efficiency to Macrophomina phaseolina of the hyphae/sclerotia of these isolates was also examined. Two such isolates with maximum (32.8%; isolate 12-94) and minimum (12%; isolate 30-94) CSH were selected for further study. Early- to mid-log exponential cells of these isolates were more hydrophobic than those in stationary phase, and the CSH of these isolates was also influenced by fluctuations in temperatures and pH. Isolate 12-94 exhibited high CSH (32.3%) at 30 degrees C, compared to lower values (28-24%) in the higher temperature range (35-40 degrees C). Increasing concentrations of either Zn2+, Fe3+, K+, and Mg2+ in the growth medium were associated with the increased CSH. Trypsin, pepsin, and proteinase K (75 to 150 micrograms.mL-1) reduced the CSH of isolate 12-94 cells. CSH was reduced, following exposure to DTT, SDS, Triton X-100, or Tween 80. Prolonged exposure of cells to starvation (60 days) also caused a significant decline in CSH. Several protein bands (18, 21, 23, 26 kDa) of the outer cell membrane were absent in 60-day starved cells compared to unstarved cells. In conclusion, our findings demonstrate that CSH of P. fluorescens isolates may contribute to nonspecific attachment/adhesion onto M. phaseolina hyphae/sclerotia, and the efficiency of adhesion is regulated by growth and other environmental conditions.     

Autoaggregation and surface hydrophobicity of bifidobacteria

Thirteen strains of four different Bifidobacterium spp. were observed for their autoaggregation ability and surface hydrophobicity, and correlation between these two traits was determined. Bifidobacteria were classified into high, medium and low autoaggregation strains according to autoaggregation ratio measured from changes in absorbance of media. High autoaggregation strains showed microscopic clustering of cells, whereas low and medium autoaggregation strains showed no such clustering. Autoaggregation ability decreased in high autoaggregation strains but increased in medium and low autoaggregation strains when the assay was performed at higher temperature (37°C compared with 25 and 10°C). Bacterial strains belonging to the high, medium or low autoaggregation group were correlated in terms of their surface hydrophobicity and evaluated based on changes in absorbance of the bacterial suspension before and after extraction with xylene. These results indicate that autoaggregation ability, together with surface hydrophobicity and microscopic image could be used for evaluating the adhesion ability of potential probiotic bifidobacterial strains. Moreover, a synergistic effect of pH and media may be involved in autoaggregation.     

Influence of surface energy of modified surfaces on bacterial adhesion

There are a number of contrary reports on the effect of surface energy of substrates on bacterial adhesion. Some reports showed that bacterial adhesion decreased with decreasing surface energy of substrates; while other reports showed that bacterial adhesion decreased with increasing surface energy of substrates. In this study Escherichia coli adhesion on the Ni--P--PTFE coatings with various surface energies was investigated and the extended DLVO theory was used to calculate the interaction energy between bacteria and the substrates in water. The theory explained the effect of surface energy of substrates on bacterial adhesion.     

Influence of culture heterogeneity in cell surface charge on adhesion and biofilm formation by Enterococcus faecalis

Biofilm formation is an increasing problem in medicine, due to the intrinsic resistance of microorganisms in the biofilm mode of growth against the host immune system and antimicrobial therapy. Adhesion is an important step in biofilm formation, influenced, among other factors, by the surface hydrophobicities and charges of both the substratum and the adhering microorganisms. Enterococcus faecalis strains generally display subpopulations with different surface charges, expressed as bimodal zeta potential distributions. Two-thirds of E. faecalis strains isolated from clogged biliary stents displayed such heterogeneity of surface charges in culture. In this study, the influence of this culture heterogeneity on initial adhesion and subsequent biofilm formation was investigated. Heterogeneous strains were retained in higher numbers on polystyrene than homogeneous strains. Also, biofilm formation was much more pronounced for heterogeneous strains than for homogeneous strains. In a population enriched to display only one subpopulation, fewer bacteria were retained than in its original heterogeneous culture. Also, the enriched subpopulation formed less biofilm than its original heterogeneous culture. The presence of ox bile during adhesion resulted in fewer retained bacteria, although heterogeneous strains were still retained in significantly higher numbers than were homogeneous strains, and, in general, the presence of ox bile reduced biofilm formation. The initial adhesion and biofilm formation were independent of the presence of the gene encoding the enterococcal surface protein (esp) or the expression of gelatinase (GelE). It is concluded that heterogeneity in cell surface charge represents an advantage for bacteria in the colonization of surfaces.     

Auto-aggregation and Co-aggregation ability in bifidobacteria and clostridia

A total of 142 human and 88 calf bifidobacteria were isolated and identified; approximately 12 % of all isolated strains exhibited auto-aggregation (Agg) phenotype (Agg+). Properties considered to be predicting for their adhesion to intestine, i.e. auto-aggregation, and hydrophobicity were determined by xylene extraction in 18 human and 8 calf origin bifidobacteria. Co-aggregation of 8 human bifidobacteria with 8 clostridia was also evaluated. Agg varied between 16.3 and 96.4 %, hydrophobicity values ranged from 0 to 82.8 %. The strongest Agg and hydrophobicity were observed in B. bifidum and B. merycicum isolates. However, there were no statistically significant correlations between these two properties. Variability in the percentage of Agg and hydrophobicity was observed after cultivation of bifidobacteria on different carbon sources. All bifidobacteria showed co-aggregation ability with clostridia tested but there were remarkable differences depending on specific combinations of strains. The bifidobacterial strains with the highest ability to co-aggregate with clostridia were B. bifidum I4 and B. longum I10 isolated from infants; these strains gave also high values of Agg. Agg properties together with co-aggregation ability with potential pathogen can be used for preliminary selection of probiotic bacteria.     

低pH处理对两歧双歧杆菌KLDS2.0603黏附能力的影响

【目的】确定低pH处理对两歧双歧杆菌KLDS2.0603黏附能力及其表面物理化学性质的影响。【方法】将两歧双歧杆菌KLDS2.0603菌体在不同低pH的PBS溶液中处理一定时间后,采用平板菌落计数法和直接镜检法,测定其经历不同pH的酸性环境后的黏附能力,及其表面疏水性和自动聚集能力。【结果】不同pH的PBS溶液处理后的双歧杆菌菌体,其黏附能力均不同程度下降,除pH 5.0的处理组外,其余处理组均显著低于空白组。此外,经不同pH的PBS溶液处理后,仅pH 3.0和3.5的两处理组,双歧杆菌表面疏水性显著提高。除pH 1.0、1.5和5.0的处理组外,其余处理组的自动聚集能力均显著下降。【结论】低pH的酸性环境会降低两歧双歧杆菌KLDS2.0603的黏附能力,并且双歧杆菌的自动聚集能力和表面疏水性也发生相应变化。除pH 3.0和3.5的处理组外,三者之间呈现一定的正相关性。     

Influence of membrane surface properties on the behavior of initial bacterial adhesion and biofilm development onto nanofiltration membranes

In order to investigate biofouling problems, the fundamental behaviors of initial bacterial adhesion and biofilm development on four different nanofiltration (NF) membranes were evaluated using Pseudomonas aeruginosa PAO1 as a model bacterial strain. Initial cell adhesion was considerably higher on an aromatic polyamide-based NF membrane with a hydrophobic and rough surface, whereas cell aggregation on a polypiperazine-based NF membrane with a relatively hydrophilic and smooth surface was lower. Moreover, significant differences in the structural heterogeneity of the biofilms were observed among the four NF membranes. This study shows that the surface roughness and hydrophobicity of a membrane play an important role in determining initial cell adhesion, aggregation and favorable localization sites for colony formation. In addition, it was found that biofilm development was strongly influenced by the surface morphology of a membrane.     

Cell surface carbohydrates in cell adhesion.

Carbohydrates are ubiquitous constituents of cell surfaces, and possess many characteristics that make them ideal candidates for recognition molecules. In many systems where cell adhesion plays a critical role, carbohydrate binding proteins have been shown to bind to cell surface carbohydrates and participate in cell-cell interactions. Such systems include fertilization, development, pathogen-host recognition and inflammation. In particular the recent discovery of the LEC-CAMs and their importance in leukocyte biology has refocused attention on lectin-mediated cell adhesion. The LEC-CAMs offer good targets for the development of therapeutics based on carbohydrate structures.     

乳酸杆菌表面结构和粘附特性的研究进展

乳酸杆菌是人和动物肠道中重要的益生菌.乳酸杆菌的表面特性决定其对肠道的粘附和定植及生理功能的发挥.研究乳酸杆菌表面结构对了解乳酸杆菌的粘附过程具有重要意义.对近年来国外关于乳酸杆菌表面结构特征和理化性质的研究进行了概述,并探讨分析了乳酸杆菌表面结构与乳酸杆菌粘附特性之间潜在的关系.