Membrane interaction and cellular internalization of penetratin peptides.

Penetratin is a 16-residue peptide [RQIKIWFQNRRMKWKK(43-58)] derived from the Antennapedia homeodomain, which is used as a vector for cellular internalization of hydrophilic molecules. In order to unravel the membrane translocation mechanism, we synthesized new penetratin variants. The contribution of the positively charged residues was studied by double substitutions of Lys and/or Arg residues to Ala, while the specific contribution of Trp48 and Trp56 was studied by individual substitution of these residues to Phe. Trp fluorescence titrations demonstrated the importance of the positively charged residues for the initial electrostatic interaction of the peptide with negatively charged vesicles. In contrast, none of the Trp residues seemed critical for this initial interaction. Trp fluorescence quenching experiments showed that penetratin lies close to the water-lipid interface in a tilted orientation, while circular dichroism indicated that lipid binding increased the alpha-helical structure of the peptides. The R53A/K57A and R52A/K55A substitutions increased calcein leakage and decreased vesicle aggregation compared to wild-type penetratin. These variants insert deeper into the lipid bilayer, due to an increased hydrophobic environment of Trp56. The W48F and W56F substitutions had a minor effect on membrane insertion and destabilization. Cellular internalization of the R53A/K57A, R52A/K55A and K46A/K57A variants by MDCK cells was similar to wild-type penetratin, as shown by flow cytometry. Moreover, residue Trp48 specifically contributed to endocytosis-independent internalization by MDCK cells, as demonstrated by the lower uptake of the W48F variant compared to wild-type penetratin and to the W56F variant. None of the penetratin variants was haemolytic or cytotoxic.     

The interaction of the cell-penetrating peptide penetratin with heparin, heparansulfates and phospholipid vesicles investigated by ESR spectroscopy.

An ESR investigation of the interaction of spin-labelled penetratin with heparin, heparansulfates and several phospholipid vesicle formulations is reported. Penetratin is a 16-aa peptide corresponding to the third helix of the Antennapedia homeodomain and belonging to the cell-penetrating peptide family. The present study shows that ESR spectroscopy can provide specific and reliable information about the mechanism of interaction of penetratin with polysaccharides and lipids, at a molecular level. The study showed that: (i) heparin and heparansulfates specifically interact with spin-labelled penetratin and promote peptide aggregation and concentration on their molecular surface; (ii) penetratin does not interact with neutral lipids, whereas it enters negatively charged lipid bilayers; (iii) cholesterol plays a negative effect on the insertion of penetratin into the lipid membrane; (iv) the interaction of penetratin with lipid vesicles is strongly dependent on lipid concentration. In a low lipid regime, penetratin associates with the polar heads of phospholipids and aggregates on the membrane surface; once the lipid concentration attains a threshold, the peptide enters the lipid bilayer. This step is characterized by reduced peptide mobility and partial disaggregation.It has been shown that ESR spectroscopy is a valuable investigation tool in studies related to the still unclear mechanism of the internalization process.     

Membrane interface composition drives the structure and the tilt of the single transmembrane helix protein PMP1: MD studies

PMP1, a regulatory subunit of the yeast plasma membrane H⁺-ATPase, is a single transmembrane helix protein. Its cytoplasmic C-terminus possesses several positively charged residues and interacts with phosphatidylserine lipids as shown through both ¹H- and ²H-NMR experiments. We used all-atom molecular dynamics simulations to obtain atomic-scale data on the effects of membrane interface lipid composition on PMP1 structure and tilt. PMP1 was embedded in two hydrated bilayers, differing in the composition of the interfacial region. The neutral bilayer is composed of POPC (1-palmitoyl-2-oleoyl-3-glycero-phosphatidylcholine) lipids and the negatively charged bilayer is composed of POPC and anionic POPS (1-palmitoyl-2-oleoyl-3-glycero-phosphatidylserine) lipids. Our results were consistent with NMR data obtained previously, such as a lipid sn-2 chain lying on the W28 aromatic ring and in the groove formed on one side of the PMP1 helix. In pure POPC, the transmembrane helix is two residues longer than the initial structure and the helix tilt remains constant at 6 ± 3°. By contrast, in mixed POPC-POPS, the initial helical structure of PMP1 is stable throughout the simulation time even though the C-terminal residues interact strongly with POPS headgroups, leading to a significant increase of the helix tilt within the membrane to 20 ± 5°.     

Membrane association and selectivity of the antimicrobial peptide NK‐2: a molecular dynamics simulation study

In an effort to better understand the initial mechanism of selectivity and membrane association of the synthetic antimicrobial peptide NK‐2, we have applied molecular dynamics simulation techniques to elucidate the interaction of the peptide with the membrane interfaces. A homogeneous dipalmitoylphosphatidylglycerol (DPPG) and a homogeneous dipalmitoylphosphatidylethanolamine (DPPE) bilayers were taken as model systems for the cytoplasmic bacterial and human erythrocyte membranes, respectively. The results of our simulations on DPPG and DPPE model membranes in the gel phase show that the binding of the peptide, which is considerably stronger for the negatively charged DPPG lipid bilayer than for the zwitterionic DPPE, is mostly governed by electrostatic interactions between negatively charged residues in the membrane and positively charged residues in the peptide. In addition, a characteristic distribution of positively charged residues along the helix facilitates a peptide orientation parallel to the membrane interface. Once the peptides reside close to the membrane surface of DPPG with the more hydrophobic side chains embedded into the membrane interface, the peptide initially disturbs the respective bilayer integrity by a decrease of the order parameter of lipid acyl chain close to the head group region, and by a slightly decrease in bilayer thickness. We found that the peptide retains a high content of helical structure on the zwitterionic membrane‐water interface, while the loss of α‐helicity is observed within a peptide adsorbed onto negatively charged lipid membranes. Copyright © 2009 European Peptide Society and John Wiley & Sons, Ltd.     

Membrane binding by MinD involves insertion of hydrophobic residues within the C-terminal amphipathic helix into the bilayer

MinD binds to phospholipid vesicles in the presence of ATP and is released by MinE, which stimulates the MinD ATPase. Membrane binding requires a short conserved C-terminal region, which has the potential to form an amphipathic helix. This finding has led to a model in which the binding of ATP regulates the formation or accessibility of this helix, which then embeds in the membrane bilayer. To test this model, we replaced each of the four hydrophobic residues within this potential helix with tryptophan or a charged residue. Introduction of a negatively charged amino acid decreased membrane binding of MinD and its ability to activate MinC. In contrast, mutants with tryptophan substitutions retained the ability to bind to the membrane and activate MinC. Fluorescence emission spectroscopy analysis of the tryptophan mutants F263W, L264W, and L267W confirmed that these tryptophan residues did insert into the hydrophobic interior of the bilayer. We conclude that membrane binding by MinD involves penetration of the hydrophobic residues within the C-terminal amphipathic helix into the hydrophobic interior of the bilayer.     

Structure and positioning comparison of two variants of penetratin in two different membrane mimicking systems by NMR.

The Antennapedia homeodomain protein of Drosophila has the ability to penetrate biological membranes and the third helix of this protein, residues 43-58, known as penetratin (RQIKIWFQNRRMKWKK-amide) has the same translocating properties as the entire protein. The variant, RQI KIFFQNRRMKFKK-amide, here called penetratin (W48F,W56F) does not have the same ability. We have determined a solution structure of penetratin and investigated the position of both peptides in negatively charged bicelles. A helical structure is seen for residues Lys46 through Met54. The secondary structure of the variant penetratin(W48F,W56F) in bicelles appears to be very similar. Paramagnetic spin-label studies and analysis of NOEs between penetratin and the phospholipids show that penetratin is located within the bicelle surface. Penetratin (W48F,W56F) is also located inside the phospholipid bicelle, however, with its N-terminus more deeply inserted than that of wild-type penetratin. The subtle differences in the way the two peptides interact with a membrane in an equilibrium situation could be important for their translocating ability. As a comparison we have also investigated the secondary structure of penetratin(W48F,W56F) in SDS micelles and the results show that the structure is very similar in SDS and bicelles. In contrast, penetratin(W48F,W56F) and penetratin appear to be located differently in SDS micelles. This clearly shows the importance of using realistic membrane mimetics for investigating peptide-membrane interactions.     

Binding of small basic peptides to membranes containing acidic lipids: theoretical models and experimental results.

We measured directly the binding of Lys3, Lys5, and Lys7 to vesicles containing acidic phospholipids. When the vesicles contain 33% acidic lipids and the aqueous solution contains 100 mM monovalent salt, the standard Gibbs free energy for the binding of these peptides is 3, 5, and 7 kcal/mol, respectively. The binding energies decrease as the mol% of acidic lipids in the membrane decreases and/or as the salt concentration increases. Several lines of evidence suggest that these hydrophilic peptides do not penetrate the polar headgroup region of the membrane and that the binding is mainly due to electrostatic interactions. To calculate the binding energies from classical electrostatics, we applied the nonlinear Poisson-Boltzmann equation to atomic models of the phospholipid bilayers and the basic peptides in aqueous solution. The electrostatic free energy of interaction, which arises from both a long-range coulombic attraction between the positively charged peptide and the negatively charged lipid bilayer, and a short-range Born or image charge repulsion, is a minimum when approximately 2.5 A (i.e., one layer of water) exists between the van der Waals surfaces of the peptide and the lipid bilayer. The calculated molar association constants, K, agree well with the measured values: K is typically about 10-fold smaller than the experimental value (i.e., a difference of about 1.5 kcal/mol in the free energy of binding). The predicted dependence of K (or the binding free energies) on the ionic strength of the solution, the mol% of acidic lipids in the membrane, and the number of basic residues in the peptide agree very well with the experimental measurements. These calculations are relevant to the membrane binding of a number of important proteins that contain clusters of basic residues.     

Application of a novel analysis to measure the binding of the membrane-translocating peptide penetratin to negatively charged liposomes

The binding of penetratin, a peptide that has been found useful for cellular delivery of large hydrophilic molecules, to negatively charged vesicles was investigated. The surface charge density of the vesicles was varied by mixing zwitterionic dioleoylphosphatidylcholine (DOPC) and negatively charged dioleoylphosphatidylglycerol (DOPG) at various molar ratios. The extent of membrane association was quantified from tryptophan emission spectra recorded during titration of peptide solution with liposomes. A singular value decomposition of the spectral data demonstrated unambiguously that two species, assigned as peptide free in solution and membrane-bound peptide, respectively, account for the spectral data of the titration series. Binding isotherms were then constructed by least-squares projection of the titration spectra on reference spectra of free and membrane-bound peptide. A model based on the Gouy-Chapman theory in combination with a two-state surface partition equilibrium, separating the electrostatic and the hydrophobic contributions to the binding free energy, was found to be in excellent agreement with the experimental data. Using this model, a surface partition constant of approximately 80 M(-)(1) was obtained for the nonelectrostatic contribution to the binding of penetratin irrespective of the fraction of negatively charged lipids in the membrane, indicating that the hydrophobic interactions are independent of the surface charge density. In accordance with this, circular dichroism measurements showed that the secondary structure of membrane-associated penetratin is independent of the DOPC/DOPG ratio. Experiments using vesicles with entrapped carboxyfluorescein showed that penetratin does not form membrane pores. Studies of the cationic peptide penetratin are complicated by extensive adsorption to surfaces of quartz and plastics. By modification of the quartz cell walls with the cationic polymer poly(ethylenimine), the peptide adsorption was reduced to a tolerable level. The data analysis method used for construction of the binding isotherms eliminated errors emanating from the remaining peptide adsorption, which otherwise would prevent a proper quantification of the binding.     

Membrane interactions of cell-penetrating peptides probed by tryptophan fluorescence and dichroism techniques: correlations of structure to cellular uptake

This work reports on the binding and conformation of a series of CPPs in the bilayer membranes of large unilamellar vesicles and the effect of the presence of cholesterol. We show a negative correlation between alpha-helical structure and uptake efficiency for penetratin peptides where the two central arginine residues of penetratin are thought to be important for breaking the secondary structure. Penetratin alpha-helicity is also reduced upon incorporation of cholesterol into the membrane. Flow linear dichroism in the far-UV region shows that the penetratin peptides adopt a preferential orientation of the alpha-helix parallel to the bilayer, and the linear dichroism (LD) spectrum in the aromatic region indicates that the tryptophan residues are preferentially oriented parallel to the membrane. The Tat analogue TatP59W and the oligoarginine R7W, which are more efficient CPPs than penetratin, bind to membranes as random coils and do not show any orientation in LD, again indicating that alpha-helicity reduces uptake efficiency. Further, we observe large variations in tryptophan quantum yields for the five CPPs in this study and discuss this in terms of the ability to cause lipid rearrangement. Binding isotherms show that cholesterol increases the affinity of the peptide for the membrane, but tryptophan fluorescence lifetimes are essentially unaltered by incorporation of as much as 40 mol % cholesterol into the membrane, suggesting the absence of specific peptide-cholesterol interactions. Fluorescence emission maxima are insensitive to cholesterol and indicate that the peptide is positioned in the headgroup region. The results on peptide-membrane interactions are discussed in terms of possible uptake mechanisms.     

Molecular dynamics simulation of human serum paraoxonase 1 in DPPC bilayer reveals a critical role of transmembrane helix H1 for HDL association

Serum paraoxonase 1 (PON1) is a high-density lipoprotein (HDL)-bound mammalian enzyme exhibiting antiatherosclerotic activity. Despite years of research, an accurate model for the binding interaction between PON1 and HDL has not been established. However, it is reported that anchoring of PON1 to HDL is mainly governed by an N-terminal alpha helix H1 and another short helix H2. Here, we studied the molecular association of full-length human PON1 (huPON1) with a HDL-mimetic dipalmitoylphosphatidylcholine (DPPC) bilayer using homology modeling and molecular dynamics simulations. Our results indicate that H1 is the highly dynamic part of huPON1, showing clockwise rotation of up to 30° within the DPPC bilayer. However, without phospholipid molecules, H1 experiences helical distortions, illustrating an incompatible HDL-anchoring conformation. Snorkeling interactions of K3, R18, and R27 together with aromatic locks formed by Y187, Y190, W194, and W202 are highly essential for anchoring of huPON1 to HDL’s surface. Molecular mechanics/Poisson–Boltzmann solvent-accessible surface area (MM/PBSA) binding free energy calculation revealed that H1 displays greater binding affinity towards lipid molecules compared with H2 and H3, suggesting that H1 is the most probable HDL-binding domain of PON1. Binding free energy decomposition showed that K3, R18, and R27 interact with polar headgroups of DPPC membrane through electrostatic interaction. Moreover, Y187, Y190, W194, and W202 interact with DPPC lipids mainly through van der Waals interaction. Taken together, these results show that the transmembrane helix H1 along with the interfacial positively charged and aromatic resides were crucial for PON1’s association with HDL particle. The current study will be useful towards understanding the antiatherosclerotic and bioscavenging properties of this promiscuous enzyme.     

Charge-dependent translocation of the Trojan peptide penetratin across lipid membranes

We studied the interaction of the cell-penetrating peptide penetratin with mixed dioleoylphosphatidylcholine/dioleoylphoshatidylglycerol (DOPC/DOPG) unilamellar vesicles as a function of the molar fraction of anionic lipid, X(PG), by means of isothermal titration calorimetry. The work was aimed at getting a better understanding of factors that affect the peptide binding to lipid membranes and its permeation through the bilayer. The binding was well described by a surface partitioning equilibrium using an effective charge of the peptide of z(P) approximately 5.1 +/- 0.5. The peptide first binds to the outer surface of the vesicles, the effective binding capacity of which increases with X(PG). At X(PG) approximately 0.5 and a molar ratio of bound peptide-to-lipid of approximately 1/20 the membranes become permeable and penetratin binds also to the inner monolayer after internalization. The results were rationalized in terms of an "electroporation-like" mechanism, according to which the asymmetrical distribution of the peptide between the outer and inner surfaces of the charged bilayer causes a transmembrane electrical field, which alters the lateral and the curvature stress acting within the membrane. At a threshold value these effects induce internalization of penetratin presumably via inversely curved transient structures.     

Membrane binding mechanism of an RNA virus-capping enzyme

The RNA replication complex of Semliki Forest virus is bound to cytoplasmic membranes via the mRNA-capping enzyme Nsp1. Here we have studied the structure and liposome interactions of a synthetic peptide (245)GSTLYTESRKLLRSWHLPSV(264) corresponding to the membrane binding domain of Nsp1. The peptide interacted with liposomes only if negatively charged lipids were present that induced a structural change in the peptide from a random coil to a partially alpha-helical conformation. NMR structure shows that the alpha-helix is amphipathic, the hydrophobic surface consisting of several leucines, a valine, and a tryptophan moiety (Trp-259). Fluorescence studies revealed that this tryptophan intercalates in the bilayer to the depth of the ninth and tenth carbons of lipid acyl chains. Mutation W259A altered the mode of bilayer association of the peptide and abolished its ability to compete for membrane association of intact Nsp1, demonstrating its crucial role in the membrane association and function of Nsp1.     

Roles of carboxyl groups in the transmembrane insertion of peptides

We have used pHLIP® [pH (low) insertion peptide] to study the roles of carboxyl groups in transmembrane (TM) peptide insertion. pHLIP binds to the surface of a lipid bilayer as a disordered peptide at neutral pH; when the pH is lowered, it inserts across the membrane to form a TM helix. Peptide insertion is reversed when the pH is raised above the characteristic pK_a (6.0). A key event that facilitates membrane insertion is the protonation of aspartic acid (Asp) and/or glutamic acid (Glu) residues, since their negatively charged side chains hinder membrane insertion at neutral pH. In order to gain mechanistic understanding, we studied the membrane insertion and exit of a series of pHLIP variants where the four Asp residues were sequentially mutated to nonacidic residues, including histidine (His). Our results show that the presence of His residues does not prevent the pH-dependent peptide membrane insertion at ∼ pH 4 driven by the protonation of carboxyl groups at the inserting end of the peptide. A further pH drop leads to the protonation of His residues in the TM part of the peptide, which induces peptide exit from the bilayer. We also find that the number of ionizable residues that undergo a change in protonation during membrane insertion correlates with the pH-dependent insertion into the lipid bilayer and exit from the lipid bilayer, and that cooperativity increases with their number. We expect that our understanding will be used to improve the targeting of acidic diseased tissue by pHLIP.     

pH-sensitive membrane peptides (pHLIPs) as a novel class of delivery agents

Abstract Here we review a novel class of delivery vehicles based on pH-sensitive, moderately polar membrane peptides, which we call pH (Low) Insertion Peptides (pHLIPs), that target cells located in the acidic environment found in many diseased tissues, including tumours. Acidity targeting by pHLIPs is achieved as a result of helix formation and transmembrane insertion. In contrast to the earlier technologies based on cell-penetrating peptides, pHLIPs act as monomeric membrane-inserting peptides that translocate one terminus across a membrane into the cytoplasm, while the other terminus remains in the extracellular space, locating the peptide in the membrane lipid bilayer. Therefore pHLIP has a dual delivery capability: it can tether cargo molecules or nanoparticles to the surfaces of cells in diseased tissues and/or it can move a cell-impermeable cargo molecule across the membrane into the cytoplasm. The source of energy for moving polar molecules attached to pHLIP through the hydrophobic layer of a membrane bilayer is the membrane-associated folding of the polypeptide. A drop in pH leads to the protonation of negatively charged residues (Asp or Glu), which enhances peptide hydrophobicity, increasing the affinity of the peptide for the lipid bilayer and triggering peptide folding and subsequent membrane insertion. The process is accompanied by the release of energy that can be utilized to move cell-impermeable cargo across a membrane. That the mechanism is now understood, and that targeting of tumours in mice has been shown, suggest a number of future applications of the pHLIP technology in the diagnosis and treatment of disease.     

Interactions of the Auxilin-1 PTEN-like Domain with Model Membranes Result in Nanoclustering of Phosphatidyl Inositol Phosphates

Auxilin-1 is a neuron-specific membrane-binding protein involved in a late stage of clathrin-mediated endocytosis. It recruits Hsc70, thus initiating uncoating of the clathrin-coated vesicles. Interactions of auxilin-1 with the vesicle membrane are crucial for this function and are mediated via an N-terminal PTEN-like domain. We have used multiscale molecular dynamics simulations to probe the interactions of the auxilin-1 PTEN-like domain with lipid bilayers containing differing phospholipid composition, including bilayers containing phosphatidyl inositol phosphates. Our results suggest a novel, to our knowledge, model for the auxilin/membrane encounter and subsequent interactions. Negatively charged lipids (especially PIP₂) enhance binding of auxilin to lipid bilayers and facilitate its correct orientation relative to the membrane. Mutations in three basic residues (R301E/R307E/K311E) of the C2 subdomain of the PTEN-like domain perturbed its interaction with the bilayer, changing its orientation. The interaction of membrane-bound auxilin-1 PTEN-like domain with negatively charged lipid headgroups results in nanoclustering of PIP₂ molecules in the adjacent bilayer leaflet.     

Structure and dynamics of helix-0 of the N-BAR domain in lipid micelles and bilayers

Bin/Amphiphysin/Rvs-homology (BAR) domains generate and sense membrane curvature by binding the negatively charged membrane to their positively charged concave surfaces. N-BAR domains contain an N-terminal extension (helix-0) predicted to form an amphipathic helix upon membrane binding. We determined the NMR structure and nano-to-picosecond dynamics of helix-0 of the human Bin1/Amphiphysin II BAR domain in sodium dodecyl sulfate and dodecylphosphocholine micelles. Molecular dynamics simulations of this 34-amino acid peptide revealed electrostatic and hydrophobic interactions with the detergent molecules that induce helical structure formation from residues 8-10 toward the C-terminus. The orientation in the micelles was experimentally confirmed by backbone amide proton exchange. The simulation and the experiment indicated that the N-terminal region is disordered, and the peptide curves to adopted the micelle shape. Deletion of helix-0 reduced tubulation of liposomes by the BAR domain, whereas the helix-0 peptide itself was fusogenic. These findings support models for membrane curving by BAR domains in which helix-0 increases the binding affinity to the membrane and enhances curvature generation.     

Design and characterization of anchoring amphiphilic peptides and their interactions with lipid vesicles.

In an effort to develop a polymer/peptide assembly for the immobilization of lipid vesicles, we have made and characterized four water-soluble amphiphilic peptides designed to associate spontaneously and strongly with lipid vesicles without causing significant leakage from anchored vesicles. These peptides have a primary amphiphilic structure with the following sequences: AAAAAAAAAAAAWKKKKKK, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK, and KKAALLLAAAAAAAAAAAAAAAAAAAWKKKKKK and its reversed homologue KKKKKKWAAAAA AAAAAAAAAAAAAALLLAAKK. Two of the four peptides have their hydrophobic segments capped at both termini with basic residues to stabilize the transmembrane orientation and to increase the affinity for negatively charged vesicles. We have studied the secondary structure and the membrane affinity of the peptides as well as the effect of the different peptides on the membrane permeability. The influence of the hydrophobic length and the role of lysine residues were clearly established. First, a hydrophobic segment of 24 amino acids, corresponding approximately to the thickness of a lipid bilayer, improves considerably the affinity to zwitterionic lipids compared to the shorter one of 12 amino acids. The shorter peptide has a low membrane affinity since it may not be long enough to adopt a stable conformation. Second, the presence of lysine residues is essential since the binding is dominated by electrostatic interactions, as illustrated by the enhanced binding with anionic lipids. The charges at both ends, however, prevent the peptide from inserting spontaneously in the bilayer since it would involve the translocation of a charged end through the apolar core of the bilayer. The direction of the amino acid sequence of the peptide has no significant influence on its behavior. None of these peptides perturbs membrane permeability even at an incubation lipid to peptide molar ratio of 0.5. Among the four peptides, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK is identified as the most suitable anchor for the immobilization of lipid vesicles.     

Reversible sheet-turn conformational change of a cell-penetrating peptide in lipid bilayers studied by solid-state NMR

The membrane-bound conformation of a cell-penetrating peptide, penetratin, is investigated using solid-state NMR spectroscopy. The ¹³C chemical shifts of ¹³C, ¹⁵N-labeled residues in the peptide indicate a reversible conformational change from β-sheet at low temperature to coil-like at high temperature. This conformational change occurs for all residues examined between positions 3 and 13, at peptide/lipid molar ratios of 1:15 and 1:30, in membranes with 25-50% anionic lipids, and in both saturated DMPC/DMPG (1,2-dimyristoyl-sn-glycero-3-phosphatidylchloline/1,2-dimyristoyl-sn-glycero-3-phosphatidylglycerol) membranes and unsaturated POPC/POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol) membranes. Thus, it is an intrinsic property of penetratin. The coil state of the peptide has C-H order parameters of 0.23-0.52 for C^α and C^β sites, indicating that the peptide backbone is unstructured. Moreover, chemical shift anisotropy lineshapes are uniaxially averaged, suggesting that the peptide backbone undergoes uniaxial rotation around the bilayer normal. These observations suggest that the dynamic state of penetratin at high temperature is a structured turn instead of an isotropic random coil. The thermodynamic parameters of this sheet-turn transition are extracted and compared to other membrane peptides reported to exhibit conformational changes. We suggest that the function of this turn conformation may be to reduce hydrophobic interactions with the lipid chains and facilitate penetratin translocation across the bilayer without causing permanent membrane damage.     

A molecular view on the interaction of the trojan peptide penetratin with the polar interface of lipid bilayers

Penetratin belongs to the family of Trojan peptides that effectively enter cells and therefore can be used as cargoes for agents that are unable to penetrate the cell membrane. We applied polarized infrared spectroscopy in combination with the attenuated total reflection technique to extract information before penetratin binding to lipid membranes with molecular resolution. The amide I band of penetratin in the presence of zwitterionic dimyristoylphosphatidylcholine and of anionic lipid membranes composed of dioleoylphosphatidylcholine and dioleoylphosphatidylglycerol shows the characteristics of an antiparallel beta-sheet with a small fraction of turns. Both signatures have been interpreted in terms of a hairpin conformation. The infrared linear dichroism of the amide I band indicates that the peptide chain orients in an oblique fashion whereas the plane of the sheet aligns virtually parallel with respect to the membrane surface. The weak effect of the peptide on dimyristoylphosphatidylcholine gives indication of its superficial binding where the charged lysine and arginine side chains form H-bonds to the phosphate oxygens of the surrounding lipids. The determinants for internalization of penetratin appear to be a peptide sequence with a distribution of positively charged residues along a beta-sheet conformation, which enables the anchoring of the peptide in the polar part of the membranes and the effective compensation of anionic lipid charges.