Structural consequences of the active site substitution Cys181 ==> Ser in metallo-beta-lactamase from Bacteroides fragilis

The metallo-beta-lactamases require divalent cations such as zinc or cadmium for hydrolyzing the amide bond of beta-lactam antibiotics. The crystal structure of the Zn2+ -bound enzyme from Bacteroides fragilis contains a binuclear zinc center in the active site. A hydroxide, coordinated to both zinc atoms, is proposed as the moiety that mounts the nucleophilic attack on the carbonyl carbon atom of the beta-lactam bond of the substrate. It was previously reported that the replacement of the active site Cys181 by a serine residue severely impaired catalysis while atomic absorption measurements indicated that binding of the two zinc ions remained intact. Contradicting data emerge from recent mass spectrometry results, which show that only a single zinc ion binds to the C181S metallo-beta-lactamase. In the current study, the C181S mutant enzyme was examined at the atomic level by determining the crystal structure at 2.6 A resolution. The overall structure of the mutant enzyme is the same as that of the wild-type enzyme. At the mutation site, the side chain of Ser181 occupies the same position as that of the side chain of Cys181 in the wild-type protein. One zinc ion, Zn1, is present in the crystal structure; however, the site of the second zinc ion, Zn2 is unoccupied. A water molecule is associated with Zn1, reminiscent of the hydroxide seen in the structure of the wild-type enzyme but farther from the metal. The position of the water molecule is off the plane of the carboxylate group of Asp103; therefore, the water molecule may be less nucleophilic than a water molecule which is coplanar with the carboxylate group.     

Crystal structure of human glyoxalase II and its complex with a glutathione thiolester substrate analogue.

BACKGROUND: Glyoxalase II, the second of two enzymes in the glyoxalase system, is a thiolesterase that catalyses the hydrolysis of S-D-lactoylglutathione to form glutathione and D-lactic acid. RESULTS: The structure of human glyoxalase II was solved initially by single isomorphous replacement with anomalous scattering and refined at a resolution of 1.9 A. The enzyme consists of two domains. The first domain folds into a four-layered beta sandwich, similar to that seen in the metallo-beta-lactamases. The second domain is predominantly alpha-helical. The active site contains a binuclear zinc-binding site and a substrate-binding site extending over the domain interface. The model contains acetate and cacodylate in the active site. A second complex was derived from crystals soaked in a solution containing the slow substrate, S-(N-hydroxy-N-bromophenylcarbamoyl)glutathione. This complex was refined at a resolution of 1.45 A. It contains the added ligand in one molecule of the asymmetric unit and glutathione in the other. CONCLUSIONS: The arrangement of ligands around the zinc ions includes a water molecule, presumably in the form of a hydroxide ion, coordinated to both metal ions. This hydroxide ion is situated 2.9 A from the carbonyl carbon of the substrate in such a position that it could act as the nucleophile during catalysis. The reaction mechanism may also have implications for the action of metallo-beta-lactamases.     

Molecular mechanism of ADP-ribose hydrolysis by human NUDT5 from structural and kinetic studies

Human NUDT5 (hNUDT5) is an ADP-ribose (ADPR) pyrophosphatase (ADPRase) that plays important roles in controlling the intracellular levels of ADPR and preventing non-enzymatic ADP-ribosylation of proteins by hydrolyzing ADPR to AMP and ribose 5′-phosphate. We report the crystal structure of hNUDT5 in complex with a non-hydrolyzable ADPR analogue, α,β-methyleneadenosine diphosphoribose, and three Mg^2 + ions representing the transition state of the enzyme during catalysis. Analysis of this structure and comparison with previously reported hNUDT5 structures identify key residues involved in substrate binding and catalysis. In the transition-state structure, three metal ions are bound at the active site and are coordinated by surrounding residues and water molecules. A conserved water molecule is at an ideal position for nucleophilic attack on the α-phosphate of ADPR. The side chain of Glu166 on loop L9 changes its conformation to interact with the conserved water molecule compared with that in the substrate-bound structure and appears to function as a catalytic base. Mutagenesis and kinetic studies show that Trp28 and Trp46 are important for the substrate binding; Arg51 is involved in both the substrate binding and the catalysis; and Glu112 and Glu116 of the Nudix motif, Glu166 on loop L9, and Arg111 are critical for the catalysis. The structural and biochemical data together reveal the molecular basis of the catalytic mechanism of ADPR hydrolysis by hNUDT5. Specifically, Glu166 functions as a catalytic base to deprotonate a conserved water molecule that acts as a nucleophile to attack the α-phosphate of ADPR, and three Mg^2 + ions are involved in the activation of the nucleophile and the binding of the substrate. Structural comparison of different ADPRases also suggests that most dimeric ADPRases may share a similar catalytic mechanism of ADPR hydrolysis.     

Crystallographic studies of inhibitor binding sites in human carbonic anhydrase II: a pentacoordinated binding of the SCN- ion to the zinc at high pH

The binding of four inhibitors--mercuric ion, 3-acetoxymercuri-4-aminobenzenesulfonamide (AMS), acetazolamide (Diamox), and thiocyanate ion--to human carbonic anhydrase II (HCA II) has been studied with X-ray crystallography. The binding of mercury to HCA II at pH 7.0 has been investigated at 3.1 A resolution. Mercuric ions are observed at both nitrogens in the His-64 ring. One of these sites is pointing toward the zinc ion. The only other binding site for mercury is at Cys-206. The binding of the two sulfonamide inhibitors AMS and Diamox, has been reinvestigated at 2.0 and 3.0 A, respectively. Only the nitrogen of the sulfonamide group binds to the zinc ion replacing the hydroxyl ion. The sulfonamide oxygen closest to the zinc ion is 3.1 A away. Thus the tetrahedral geometry of the zinc is retained, refuting earlier models of a pentacoordinated zinc. The structure of the thiocyanate complex has been investigated at pH 8.5 and the structure has been refined at 1.9 A resolution using the least-squares refinement program PROLSQ. The crystallographic R factor is 17.6%. The zinc ion is pentacoordinated with the anion as well as a water molecule bound in addition to the three histidine residues. The nitrogen atom of the SCN- ion is 1.9 A from the zinc ion but shifted 1.3 A with respect to the hydroxyl ion in the native structure and at van der Waals' distance from the O gamma l atom of Thr-199. This is due to the inability of the O gamma l atom of Thr-199 to serve as a hydrogen bond donor, thus repelling the nonprotonated nitrogen. The SCN- molecule reaches into the deep end of the active site cavity where the sulfur atom has displaced the so-called "deep" water molecule of the native enzyme. The zinc-bound water molecule is 2.2 A from the zinc ion and 2.4 A from the SCN- nitrogen. In addition, this water is hydrogen bonded to the O gamma l atom of Thr-199 and to another water molecule. We have observed that solvent and inhibitor molecules have three possible binding sites on the zinc ion and their significance for the catalysis and inhibition of HCA II will be discussed. All available crystallographic data are consistent with a proposed catalytic mechanism in which both the OH moiety and one oxygen of the substrate HCO3- ion are ligated to the zinc ion.     

Carboxypeptidase A: mechanism of zinc inhibition

Zinc ions competitively inhibit carboxypeptidase A from bovine pancreas. The state(s) of hydroxylation of zinc and their possible site(s) of interaction with the enzyme have been investigated by determining the strength of zinc inhibition over pH range 4.6-10.5. The inhibition kinetics were recorded under stopped-flow conditions using the alpha-Val isozyme and the peptide substrate Dns-Gly-Ala-Phe in 0.5 M NaCl at 25 degrees C. The pH dependence of pKI follows a pattern which indicates that the enzyme is selectively inhibited by zinc monohydroxide, ZnOH+ (KI = 7.1 X 10(-7) M). The formation of the inhibitory ZnOH+ complex from fully hydrated Zn2+ is characterized by an ionization constant of 9.05, and the consecutive conversion of ZnOH+ to Zn(OH)2, Zn(OH)3-, and Zn(OH)4(2-) complexes takes place with ionization constants of 9.75, 10.1, and 10.5, respectively. Ionization of a ligand, LH, in the enzyme's inhibitory site (pKLH 5.8) is obligatory for binding of the ZnOH+ complex. The enzymatic activity (kcat/Km) is influenced by three ionizable groups: pKEH2 5.78, pKEH 8.60, and pKE 10.2. Since the values of pKLH and pKEH2 are virtually identical, it is possible that the inhibitory ZnOH+ complex interacts with the group responsible for pKEH2. Previous studies have suggested that pKEH2 reflects the ionization of Glu-270 and its interaction with a water molecule coordinated to the catalytic zinc ion. It is proposed that the inhibitory zinc ion binds to the carboxylate of Glu-270 and that the inhibition process is specific for zinc monohydroxide because it allows the formation of a stabilizing hydroxide bridge between the inhibitory and catalytic zinc ions.     

The reaction mechanism of paraoxon hydrolysis by phosphotriesterase from combined QM/MM simulations

Molecular dynamics simulations employing combined quantum mechanical and molecular mechanical (QM/MM) potentials have been carried out to investigate the reaction mechanism of the hydrolysis of paraoxon by phosphotriesterase (PTE). We used a dual-level QM/MM approach that synthesizes accurate results from high-level electronic structure calculations with computational efficiency of semiempirical QM/MM potentials for free energy simulations. In particular, the intrinsic (gas-phase) energies of the active site in the QM region are determined by using density functional theory (B3LYP) and second-order M?ller-Plesset perturbation theory (MP2) and the molecular dynamics free energy simulations are performed by using the mixed AM1:CHARMM potential. The simulation results suggest a revised mechanism for the phosphotriester hydrolysis mechanism by PTE. The reaction free energy profile is mirrored by structural motions of the binuclear metal center in the active site. The two zinc ions occupy a compact conformation with an average zinc-zinc distance of 3.5 +/- 0.1 A in the Michaelis complex, whereas it is elongated to 5.3 +/- 0.3 A at the transition state and product state. The substrate is loosely bound to the more exposed zinc ion (Znbeta2+) at an average distance of 3.8 A +/- 0.3 A. The P=O bond of the substrate paraoxon is activated by adopting a tight coordination to the Znbeta2+, releasing the coordinate to the bridging hydroxide ion and increasing its nucleophilicity. It was also found that a water molecule enters into the binding pocket of the loosely bound binuclear center, originally occupied by the nucleophilic hydroxide ion. We suggest that the proton of this water molecule is taken up by His254 at low pH or released to the solvent at high pH, resulting in a hydroxide ion that pulls the Znbeta2+ ion closer to form the compact configuration and restores the resting state of the enzyme.     

Substitution of Glu122 by Glutamine Revealed the Function of the Second Water Molecule as a Proton Donor in the Binuclear Metal Enzyme Creatininase

Creatininase is a binuclear zinc enzyme and catalyzes the reversible conversion of creatinine to creatine. It exhibits an open-closed conformational change upon substrate binding, and the differences in the conformations of Tyr121, Trp154, and the loop region containing Trp174 were evident in the enzyme-creatine complex when compared to those in the ligand-free enzyme. We have determined the crystal structure of the enzyme complexed with a 1-methylguanidine. All subunits in the complex existed as the closed form, and the binding mode of creatinine was estimated. Site-directed mutagenesis revealed that the hydrophobic residues that show conformational change upon substrate binding are important for the enzyme activity.We propose a catalytic mechanism of creatininase in which two water molecules have significant roles. The first molecule is a hydroxide ion (Wat1) that is bound as a bridge between the two metal ions and attacks the carbonyl carbon of the substrate. The second molecule is a water molecule (Wat2) that is bound to the carboxyl group of Glu122 and functions as a proton donor in catalysis. The activity of the E122Q mutant was very low and it was only partially restored by the addition of ZnCl₂ or MnCl₂. In the E122Q mutant, k_cat is drastically decreased, indicating that Glu122 is important for catalysis. X-ray crystallographic study and the atomic absorption spectrometry analysis of the E122Q mutant-substrate complex revealed that the drastic decrease of the activity of the E122Q was caused by not only the loss of one Zn ion at the Metal1 site but also a critical function of Glu122, which most likely exists for a proton transfer step through Wat2.     

Limiting rates of ligand association to alcohol dehydrogenase.

Detailed stopped-flow kinetic studies of the association of 2,2-bipyridine, 1,10-phenanthroline, and 5-chloro-1,10-phenanthroline to the zinc ion at the active site of alcohol dehydrogenase have demonstrated that a process with a limiting rate constant of about 200 s^?1 restricts the binding of the bidentate chelating agents to the free enzyme. The formation of the enzyme-ligand complexes has been followed by means of the characteristic absorption spectra of the resulting complexes or by the displacement of the fluorescent dye, auramine O. Monodentate ligands, upon binding to the free enzyme or enzyme-NAD⁺ and enzyme-NADH complexes, do not exhibit a comparable limiting rate. In analogy with simple inorganic systems, these observations have been interpreted in terms of the rate limiting dissociation of an inner sphere water molecule following the rapid formation by the bidentate ligand of an outer sphere complex. The displacement of a water molecule from the zinc ion by 1,10-phenanthroline has been observed in crystallographic studies which have also established that the zinc ion in the enzyme-1,10-phenanthroline complex is pentacoordinate. Monodentate ligands, which are substrate analogs, do not exhibit limiting rates because displacement of water is not required for their addition to a coordinate position which is apparently vacant in the free enzyme. If a water molecule remains bound to the zinc ion in the kinetically competent ternary complex, it could play an essential role in the proton transfer reaction accompanying catalysis.     

Characterization of the metallocenter of rabbit skeletal muscle AMP deaminase. A new model for substrate interactions at a dinuclear cocatalytic Zn site

We have previously provided evidence for a dinuclear zinc site in rabbit skeletal muscle AMPD compatible with a (micro-aqua)(micro-carboxylato)dizinc(II) core with an average of two histidine residues at each metal site. XAS of the zinc binding site of the enzyme in the presence of PRN favors a model where PRN is added to the coordination sphere of one of the two zinc ions increasing its coordination number to five. The uncompetitive nature of the inhibition of AMPD by fluoride reveals that the anion probably displaces the nucleophile water molecule terminally coordinated to the catalytic Zn(1) ion at the enzyme C-terminus, following the binding of AMP at the Zn(2) ion located at N-terminus of the enzyme. Thus, the two Zn ions in the AMPD metallocenter operate together as a single catalytic unit, but have independent function, one of them (Zn(1)) acting to polarize the nucleophile water molecule, whilst the other (Zn(2)) acts transiently as a receptor for an activating substrate molecule. The addition of fluoride to AMPD also abolishes the cooperative behaviour induced in the enzyme by the inhibitory effect of ATP at acidic pH that probably resides in the competition with the substrate for an adenine nucleotide specific regulatory site located in the Zn(2) ion binding region and which is responsible for the positive homotropic cooperativity behaviour of AMPD.     

Structural diversity within the mononuclear and binuclear active sites of N-acetyl-D-glucosamine-6-phosphate deacetylase

NagA catalyzes the hydrolysis of N-acetyl-d-glucosamine-6-phosphate to d-glucosamine-6-phosphate and acetate. X-ray crystal structures of NagA from Escherichia coli were determined to establish the number and ligation scheme for the binding of zinc to the active site and to elucidate the molecular interactions between the protein and substrate. The three-dimensional structures of the apo-NagA, Zn-NagA, and the D273N mutant enzyme in the presence of a tight-binding N-methylhydroxyphosphinyl-d-glucosamine-6-phosphate inhibitor were determined. The structure of the Zn-NagA confirms that this enzyme binds a single divalent cation at the beta-position in the active site via ligation to Glu-131, His-195, and His-216. A water molecule completes the ligation shell, which is also in position to be hydrogen bonded to Asp-273. In the structure of NagA bound to the tight binding inhibitor that mimics the tetrahedral intermediate, the methyl phosphonate moiety has displaced the hydrolytic water molecule and is directly coordinated to the zinc within the active site. The side chain of Asp-273 is positioned to activate the hydrolytic water molecule via general base catalysis and to deliver this proton to the amino group upon cleavage of the amide bond of the substrate. His-143 is positioned to help polarize the carbonyl group of the substrate in conjunction with Lewis acid catalysis by the bound zinc. The inhibitor is bound in the alpha-configuration at the anomeric carbon through a hydrogen bonding interaction of the hydroxyl group at C-1 with the side chain of His-251. The phosphate group of the inhibitor attached to the hydroxyl at C-6 is ion paired with Arg-227 from the adjacent subunit. NagA from Thermotoga maritima was shown to require a single divalent cation for full catalytic activity.     

Biosynthesis of pteridines. Reaction mechanism of GTP cyclohydrolase I

GTP cyclohydrolase I catalyses the hydrolytic release of formate from GTP followed by cyclization to dihydroneopterin triphosphate. The enzymes from bacteria and animals are homodecamers containing one zinc ion per subunit. Replacement of Cys110, Cys181, His112 or His113 of the enzyme from Escherichia coli by serine affords catalytically inactive mutant proteins with reduced capacity to bind zinc. These mutant proteins are unable to convert GTP or the committed reaction intermediate, 2-amino-5-formylamino-6-(beta-ribosylamino)-4(3H)-pyrimidinone 5'-triphosphate, to dihydroneopterin triphosphate. The crystal structures of GTP complexes of the His113Ser, His112Ser and Cys181Ser mutant proteins determined at resolutions of 2.5A, 2.8A and 3.2A, respectively, revealed the conformation of substrate GTP in the active site cavity. The carboxylic group of the highly conserved residue Glu152 anchors the substrate GTP, by hydrogen bonding to N-3 and to the position 2 amino group. Several basic amino acid residues interact with the triphosphate moiety of the substrate. The structure of the His112Ser mutant in complex with an undefined mixture of nucleotides determined at a resolution of 2.1A afforded additional details of the peptide folding. Comparison between the wild-type and mutant enzyme structures indicates that the catalytically active zinc ion is directly coordinated to Cys110, Cys181 and His113. Moreover, the zinc ion is complexed to a water molecule, which is in close hydrogen bond contact to His112. In close analogy to zinc proteases, the zinc-coordinated water molecule is suggested to attack C-8 of the substrate affording a zinc-bound 8R hydrate of GTP. Opening of the hydrated imidazole ring affords a formamide derivative, which remains coordinated to zinc. The subsequent hydrolysis of the formamide motif has an absolute requirement for zinc ion catalysis. The hydrolysis of the formamide bond shows close mechanistic similarity with peptide hydrolysis by zinc proteases.     

Crystal structure of Grimontia hollisae collagenase provides insights into its novel substrate specificity toward collagen

Collagenase from the gram-negative bacterium Grimontia hollisae strain 1706B (Ghcol) degrades collagen more efficiently even than clostridial collagenase, the most widely used industrial collagenase. However, the structural determinants facilitating this efficiency are unclear. Here, we report the crystal structures of ligand-free and Gly-Pro-hydroxyproline (Hyp)-complexed Ghcol at 2.2 and 2.4 Å resolution, respectively. These structures revealed that the activator and peptidase domains in Ghcol form a saddle-shaped structure with one zinc ion and four calcium ions. In addition, the activator domain comprises two homologous subdomains, whereas zinc-bound water was observed in the ligand-free Ghcol. In the ligand-complexed Ghcol, we found two Gly-Pro-Hyp molecules, each bind at the active site and at two surfaces on the duplicate subdomains of the activator domain facing the active site, and the nucleophilic water is replaced by the carboxyl oxygen of Hyp at the P1 position. Furthermore, all Gly-Pro-Hyp molecules bound to Ghcol have almost the same conformation as Pro-Pro-Gly motif in model collagen (Pro-Pro-Gly)₁₀, suggesting these three sites contribute to the unwinding of the collagen triple helix. A comparison of activities revealed that Ghcol exhibits broader substrate specificity than clostridial collagenase at the P2 and P2′ positions, which may be attributed to the larger space available for substrate binding at the S2 and S2′ sites in Ghcol. Analysis of variants of three active-site Tyr residues revealed that mutation of Tyr564 affected catalysis, whereas mutation of Tyr476 or Tyr555 affected substrate recognition. These results provide insights into the substrate specificity and mechanism of G. hollisae collagenase.     

Structural analysis of zinc substitutions in the active site of thermolysin.

Native thermolysin binds a single catalytically essential zinc ion that is tetrahedrally coordinated by three protein ligands and a water molecule. During catalysis the zinc ligation is thought to change from fourfold to fivefold. Substitution of the active-site zinc with Cd2+, Mn2+, Fe2+, and Co2+ alters the catalytic activity (Holmquist B, Vallee BL, 1974, J Biol Chem 249:4601-4607). Excess zinc inhibits the enzyme. To investigate the structural basis of these changes in activity, we have determined the structures of a series of metal-substituted thermolysins at 1.7-1.9 A resolution. The structure of the Co(2+)-substituted enzyme is shown to be very similar to that of wild type except that two solvent molecules are liganded to the metal at positions that are thought to be occupied by the two oxygens of the hydrated scissile peptide in the transition state. Thus, the enhanced activity toward some substrates of the cobalt-relative to the zinc-substituted enzyme may be due to enhanced stabilization of the transition state. The ability of Zn2+ and Co2+ to accept tetrahedral coordination in the Michaelis complex, as well as fivefold coordination in the transition state, may also contribute to their effectiveness in catalysis. The Cd(2+)- and Mn(2+)-substituted thermolysins display conformational changes that disrupt the active site to varying degrees and could explain the associated reduction of activity. The conformational changes involve not only the essential catalytic residue, Glu 143, but also concerted side-chain rotations in the adjacent residues Met 120 and Leu 144. Some of these side-chain movements are similar to adjustments that have been observed previously in association with the "hinge-bending" motion that is presumed to occur during catalysis by the zinc endoproteases. In the presence of excess zinc, a second zinc ion is observed to bind at His 231 within 3.2 A of the zinc bound to native thermolysin, explaining the inhibitory effect.     

Evidence that binding of C5 protein to P RNA enhances ribozyme catalysis by influencing active site metal ion affinity

The RNA subunit (P RNA) of the bacterial RNase P ribonucleoprotein is a ribozyme that catalyzes the Mg-dependent hydrolysis of pre-tRNA, but it requires an essential protein cofactor (P protein) in vivo that enhances substrate binding affinities and catalytic rates in a substrate dependent manner. Previous studies of Bacillus subtilis RNase P, containing a Type B RNA subunit, showed that its cognate protein subunit increases the affinity of metal ions important for catalysis, but the functional role of these ions is unknown. Here, we demonstrate that the Mg2+ dependence of the catalytic step for Escherichia coli RNase P, which contains a more common Type A RNA subunit, is also modulated by its cognate protein subunit (C5), indicating that this property is fundamental to P protein. To monitor specifically the binding of active site metal ions, we analyzed quantitatively the rescue by Cd2+ of an inhibitory Rp phosphorothioate modification at the pre-tRNA cleavage site. The results show that binding of C5 protein increases the apparent affinity of the rescuing Cd2+, providing evidence that C5 protein enhances metal ion affinity in the active site, and thus is likely to contribute significantly to rate enhancement at physiological metal ion concentrations.     

Substrate binding and catalytic mechanism in phospholipase C from Bacillus Cereus: A molecular mechanics and molecular dynamics study

For the first time a consistent catalytic mechanism of phospholipase C from Bacillus cereus is reported based on molecular mechanics calculations. We have identified the position of the nucleophilic water molecule, which is directly involved in the hydrolysis of the natural substrate, phosphatidylcholine, in phospholipase C. This catalytically essential water molecule, after being activated by an acidic residue (Asp55), performs the nucleophilic attack on the phosphorus atom in the substrate, leading to a trigonal bipyramidal pentacoordinated intermediate (and structurally similar transition state). The subsequent collapse of the intermediate, regeneration of the enzyme, and release of the products has to involve a not yet identified second water molecule. The catalytic mechanism reported here is based on a series of molecular mechanics calculations. First, the x-ray structure of phospholipase C from B. cereus including a docked substrate molecule was subjected to a stepwise molecular mechanics energy minimization. Second, the location of the nucleophilic water molecule in the active site of the fully relaxed enzyme–substrate complex was determined by evaluation of nonbonded interaction energies between the complex and a water molecule. The nucleophilic water molecule is positioned at a distance (3.8 Å) from the phosphorus atom in the substrate, which is in good agreement with experimentally observed distances. Finally, the stability of the complex between phospholipase C, the substrate, and the nucleophilic water molecule was verified during a 100 ps molecular dynamics simulation. During the simulation the substrate undergoes a conformational change, but retains its localization in the active site. The contacts between the enzyme, the substrate, and the nucleophilic water molecule display some fluctuations, but remain within reasonable limits, thereby confirming the stability of the enzyme–substrate–water complex. The protocol developed for energy minimization of phospholipase C containing three zinc ions located closely together at the bottom of the active site cleft is reported in detail. In order to handle the strong electrostatic interactions in the active site realistically during energy minimization, delocalization of the charges from the three zinc ions was considered. Therefore, quantum mechanics calculations on the zinc ions and the zinc-coordinating residues were carried out prior to the molecular mechanics calculations, and two different sets of partial atomic charges (MNDO-Mulliken and AM1-ESP) were applied. After careful assignment of partial atomic charges, a complete energy minimization of the protein was carried out by a stepwise procedure without explicit solvent molecules. Energy minimization with either set of charges yielded structures, which were very similar both to the x-ray structure and to each other, although using AM1-ESP partial atomic charges and a dielectric constant of 4, yielded the best protein structure. © 1997 John Wiley and Sons, Inc. Biopoly 42: 319–336, 1997     

Insight into the mechanism of the IMP-1 metallo-beta-lactamase by molecular dynamics simulations

Two models, a purely nonbonded model and a cationic dummy atom approach, were examined for the modeling of the binuclear zinc-containing IMP-1 metallo-beta-lactamase in complex with a mercaptocarboxylate inhibitor. The cationic dummy atom approach had substantial advantages as it maintained the initial, experimentally determined geometry of the metal-containing active site during molecular dynamics simulations in water. The method was extended to the modeling of the free enzyme and the enzyme in complex with a cephalosporin substrate docked in an intermediate structure. For all three systems, the modeled complexes and the tetrahedral coordination of the zinc ions were stable. The average zinc-zinc distance increased by approximately 1 A in the substrate complex compared with the inhibitor complex and the free enzyme in which a hydroxide ion acts as a bridging ligand. Thus, the zinc ions are predicted to undergo a back and forth movement upon the cycle of hydrolysis. In contrast to previous assumptions, no interaction of the Asn167 side chain with the bound cephalosporin substrate was observed. Our observations are in agreement with quantum-mechanical calculations and experimental data and indicate that the cationic dummy atom approach is useful to model zinc-containing metallo-beta-lactamases as free proteins, in complex with inhibitors and in complex with substrates.     

Crystal structure of D-aminoacylase from Alcaligenes faecalis DA1. A novel subset of amidohydrolases and insights into the enzyme mechanism

D-Aminoacylase is an attractive candidate for commercial production of D-amino acids through its catalysis in the hydrolysis of N-acyl-D-amino acids. We report here the first D-aminoacylase crystal structure from A. faecalis at 1.5-A resolution. The protein comprises a small beta-barrel, and a catalytic (betaalpha)(8)-barrel with a 63-residue insertion. The enzyme structure shares significant similarity to the alpha/beta-barrel amidohydrolase superfamily, in which the beta-strands in both barrels superimpose well. Unexpectedly, the enzyme binds two zinc ions with widely different affinities, although only the tightly bound zinc ion is required for activity. One zinc ion is coordinated by Cys(96), His(220), and His(250), while the other is loosely chelated by His(67), His(69), and Cys(96). This is the first example of the metal ion coordination by a cysteine residue in the superfamily. Therefore, D-aminoacylase defines a novel subset and is a mononuclear zinc metalloenzyme but containing a binuclear active site. The preferred substrate was modeled into a hydrophobic pocket, revealing the substrate specificity and enzyme catalysis. The 63-residue insertion containing substrate-interacting residues may act as a gate controlling access to the active site, revealing that the substrate binding would induce a closed conformation to sequester the catalysis from solvent.     

Inhibition of 2'-5' oligoadenylate synthetase by divalent metal ions.

OAS1 is the small form and OAS2 is the medium form of the human interferon-induced 2'-5' oligoadenylate synthetases. The p42 isoform of OAS1 and the p69 isoform of OAS2 have been expressed in insect cells and purified to give pure, highly active 2'-5' oligoadenylate synthetase. The catalysis of 2'-5' oligoadenylate synthesis is strictly dependent on double-stranded RNA and magnesium ions. We have examined the effect of a series of divalent metal ions: copper, iron and zinc ions strongly inhibited the enzymatic activity, cobalt and nickel ions were partly inhibitory whereas calcium and manganese ions were without effect. However, manganese ions can replace magnesium ions as activator. The inhibitory effect of zinc ions was characterised in detail. The inhibitory constants of Zn(2+) were estimated to be 0.10 mM for OAS1p42 and to 0.02 mM for OAS2p69. Cross-linking experiments showed that zinc ions can control the oligomerisation by enhancing the formation of tetrameric forms of OAS1p42     

Multifunctional catalysis by metal complexes: 1. Ester hydrolysis catalyzed by oximinatozinc(II) ions

Hydrolysis of p-nitrophenyl acetate catalyzed by a Zn(II) complex of 2-acetylpyridineketoxime or 2-pyridinecarboxaldoxime was studied as a model of multifunctional catalysis by metalloproteases. The reaction proceeded exclusively through the formation of an acylcatalyst intermediate under the experimental conditions, and both the formation and the breakdown of the acyl intermediate were much faster than the spontaneous reaction. The metal ion, the metal-bound water molecule or hydroxide ion, the oximate ion, and general bases contributed to the multifunctional catalysis in ester hydrolysis by the oximinatozinc(II) ions.