Characterization and construction of molecular cloning vehicles within Staphylococcus aureus.

Four chloramphenicol resistance (Cm) and four tetracycline resistance (Tc) plasmids from Staphylococcus aureus were characterized by restriction endonuclease mapping. All four Tc plasmids had molecular masses of 2.9 megadaltons (Mdaltons) and indistinguishable responses to seven different restriction endonucleases. The four Cm plasmids (pCW6, pCW7, pCW8, and pC221) had molecular masses of 2.6, 2.8, 1.9, and 2.9 Mdaltons, respectively. The four Cm plasmids also differed both in the level of resistance to Cm and in susceptibility to retriction endonucleases. Single restriction endonuclease sites contained within each plasmid included the following: in pCW6 for HindIII, XbaI, HpaII, and BstEII; in pCW7 for HindIII, BstEII, BglII, HaeIII, and HpaII; in pCW8 for HindIII, HaeIII, and HpaII; in pC221 for HindIII, BstEII, and EcoRI. The molecular cloning capabilities of pCW8 and pC221 were determined. Cm and erythromycin resistance (Em) recombinant plasmids pCW12, PCW13, and pCW14 were constructed and used to transform S. aureus 8325-4. A 2.8-Mdalton HindIII fragment from plasmid pI258 was found to encode Em resistance and contain single sites for the retriction endonucleases BglII, PstI, HaeIII, and HpaII. The largest EcoRI fragment (8 Mdaltons) from pI258 contained the HindIII fragment encoding Em resistance intact. Cloning of DNA into the BglII site of pCW14 did not alter Em resistance. Cloning of DNA into the HindIII site of pCW8 and the HindIII and EcoRI sites of pC221 did not disrupt either plasmid replication of Cm resistance.     

Transfer of plasmid-borne resistance from a multiply-resistant Staphylococcus aureus isolate,WBG1022

Staphylococcus aureus isolate, WBG1022, was resistant to penicillin, kanamycin, neomycin, streptomycin, chloramphenicol, trimethoprim, cadmium, and ethidium bromide and harbored plasmids of 34.5, 24.5, 4.4, 3.2, and 2.6 kilobases. The plasmids were transferred in mixed-culture transfer and conjugation experiments. No resistance phenotype was associated with the 2.6-kb plasmid. The 3.2-kb and 4.4-kb plasmids encoded chloramphenicol and streptomycin resistance respectively. The 24.5-kb plasmid, pWBG626, encoded joint resistance to penicillin, kanamycin, neomycin, and ethidium bromide. Resistance to trimethoprim and cadmium were chromosomal. The 34.5-kb plasmid, pWBG661, had no resistance phenotype but was found to be conjugative. It also mobilized the 4.4-kb and 24.5-kb plasmids in WBG1022. Restriction endonuclease analysis of pWBG661 with EcoRI, ClaI, PvuII, and BglII restriction enzymes demonstrated that pWBG661 was identical to two previously isolated S. aureus conjugative plasmids, p WBG620 and pWBG637, that also lack resistance phenotypes.     

Nucleotide sequence and structural relationships of a chloramphenicol acetyltransferase encoded by the plasmid pSCS6 from Staphylococcus aureus.

The 4.6 kb chloramphenicol resistance (Cm) plasmid, pSCS6, isolated from a naturally occurring Staphylococcus aureus biotype C encoded an inducible chloramphenicol acetyltransferase (CAT). The respective cat gene and its regulatory region were cloned. Sequence analyses revealed two open reading frames: one for a 9-amino acid leader peptide and the other for the 215-amino acid CAT monomer. Comparisons of the predicted CAT amino acid sequences revealed a high degree of similarity between CAT from pSCS6 and the CAT variants encoded by Cm plasmids of the pC221 family. These close structural relationships suggested an intraspecific exchange of Cm-determinants between Staph. aureus of human and bovine biotype.     

Cloning and analysis of the Clostridium perfringens tetracycline resistance plasmid, pCW3

Clostridium perfringens strain CW92 carries pCW3, a conjugative 47-kb plasmid that confers inducible resistance to tetracycline. The plasmid was examined by restriction endonuclease analysis and by cloning each of the five ClaI fragments of pCW3 in Escherichia coli, using pBR322. Analysis of the recombinant plasmids allowed the deduction of a detailed restriction map of pCW3. The tetracycline resistance determinant of pCW3 was mapped by examining the phenotype of recombinant E. coli clones derived from the cloning, into pUC vector plasmids, of EcoRI fragments from pCW3. The C. perfringens tetracycline resistance determinant was expressed in E. coli and was shown to be located on two juxtaposed EcoRI fragments which together encompass a 4-kb region of pCW3. Deletion experiments showed that the tetracycline resistance gene, and/or its control regions, contained internal EcoRI and SphI sites. E. coli strains that carried recombinant plasmids with only the 4-kb region were found to express tetracycline resistance constitutively. In contrast, recombinant plasmids harboring a 10.5-kb ClaI fragment of pCW3, that included the 4-kb region, coded for an inducible tetracycline resistance phenotype. The existence of a negatively regulated resistance gene, similar to that proposed for several other bacteria is postulated.     

Cloning of two chloramphenicol acetyltransferase genes from Clostridium butyricum and their expression in Escherichia coli and Bacillus subtilis

Summary Two non-homologous chloramphenicol (Cm) acetyltransferase (CAT) genes, designated catA and catB, were cloned from Clostridium butyricum type strains and characterized by restriction mapping. Both genes are efficiently expressed in Escherichia coli and Bacillus subtilis. In contrast to analogous genes from staphylococci and bacilli, gene expression is not dependent on induction by Cm. The genes are considered as chromosomal, since no association with endogenous plasmids was detectable. Southern hybridization revealed a homology between catA and the staphylococcal Cm resistance plasmid, pC194. The subunit size of the clostridial CAT enzymes expressed in E. coli was determined as 22.5 kDa (catA) and 24 kDa (catB), respectively. The C. butyricum cat genes provide potentially useful selection markers for the construction of cloning vectors from cryptic clostridial plasmids.     

Short communication: Construction of a cloning vector for Paenibacillus polymyxa and P. azotofixans

A cloning vector that could replicate in Paenibacillus polymyxa, P. azotofixans and Bacillus subtilis was constructed using two Staphylococcus aureus plasmids. The recombinant plasmid confers chloramphenicol and erythromycin resistance and contains unique restriction sites for PvuII and BclI. The stability of pRJ45 was analysed.     

Construction ofClostridium butyricum hybrid plasmids and transfer toBacillus subtilis

Summary Small plasmids were isolated from type strains ofClostridium butyricum. Strain NCIB 7423 carries one plasmid (pCBU1) of 6.4 kb, whereas strain NCTC 7423 carries two unrelated plasmids of 6.3 kb (pCBU2) and 8.4 kb (pCBU3). Cleavage sites for 18 restriction endonucleases have been mapped on these plasmids and detailed physical maps are presented. For the purpose of developing vector plasmids for gene cloning in saccharolytic clostridia these crypticC. butyricum plasmids were joined to a selectable marker that will likely be expressed in clostridia. This was achieved by cloning the clostridial plasmids into theE. coli vector pBR322 carrying the chloramphenicol acetyltransferase (CAT) gene from theStaphylococcus aureus plasmid pC194. The recombinant plasmids were tested for their ability to confer chloramphenicol resistance toBacillus subtilis. Hybrid plasmids (pHL105, pHL1051) derived from pCBU2 were identified, which are capable of replication and expression of theS. aureus drug resistance marker in bothE. coli andB. subtilis. No structural instability was detected upon retransformation of pHL105 fromB. subtilis intoE. coli. The recombinant plasmids might thus be useful as shuttle vectors for the gene transfer betweenE. coli and a wide range of bacilli and clostridia.     

Cryptic plasmid pBf1 fromButyrivibrio fibrisolvens AR10: Its use as a replicon for recombinant plasmids

A cryptic 2.85 kb plasmid (pBf1) was isolated from the rumen bacteriumButyrivibrio fibrisolvens strain AR10, ampped with restriction endonucleases, and cleavage sites suitable for attachment toEscherichia coli plasmids were identified. AR10 was not able to be cured of pBf1 by growth at 42°C or in 0.25 g ampicillin/ml, but growth in 50 g acridine orange/ml for three culture passages produced cured colonies at a frequency of <1%. Chimeric plasmids were constructed by combining pBf1 with theE. coli plasmid pUC18, in addition to the clindamycin resistance gene fromBacteroides fragilis plasmid pDP1 (pCW2 and pCW3), or the CAT gene fromE. coli plasmid pKK232-8 (pCK1). For plasmid construction, pBf1 was cleaved at two alternative restriction sites to increase the likelihood that replication control sequences would remain functional in at least one of the plasmids. Electroporation of AR10 yielded transformant populations that clearly maintained the plasmids and that appeared to express the ampicillinase gene of pUC18, although transformants were not readily selectable with any of the three antibiotics. The suitability of pBf1 as a replicon on which to base the construction of shuttle vectors was demonstrated clearly, by persistence of plasmid pCW3 in the absence of selective pressure, and the addition of appropriate selection factors is expected to yield practical transformation vectors.     

Characterization of small plasmids from Staphylococcus aureus.

Small molecular weight plasmids from Staphylococcus aureus were characterized with respect to size, restriction enzyme cleavage pattern and transforming capacity. The plasmids pS194 and pC194 which encode streptomycin and chloramphenicol resistance respectively contained 3.0 and 2.0 megadaltons of DNA as determined by zonal rate centrifugation and electron-microscopy. Both plasmids transformed S. aureus with high efficiency. Plasmid pC194 contained only one cleavage site for endonuclease HindIII and pS194 contained single cleavage sites for HindIII and EcoRI. A natural recombinant between these two plasmids, pSC194, shared the high transforming capacity of the parental plasmids and contained one EcoRI site And two HindIII sites. pSC194 DNA also transformed B. subtilis with high efficiency. The recombinant plasmid pSC194 may be used as an EcoRI vector for construction and propagation of hybrid DNA in S. aureus as shown in the following paper (Löfdahl et al., 1978).     

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

Summary pT181 and pC221 are closely relatedStaphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in therep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping therep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181. The results of complenentation studies conducted using these hybrids have shown that: (i) at the usual level of expression for a wild-type plasmid each Rep protein can initiate replication strictly from its corresponding origin; (ii) when overproduced, the pT181 RepC protein could also act efficiently on the pC221 origin; a functional pT181 origin present in the same host completely prevented this complementation; (iii) in excess, the RepD protein encoded by pC221 could replicate a plasmid carrying the pT181 origin but could not ensure the hereditary stability of such a plasmid in the absence of another active replication system; (iv) when overproduced both RepC and RepD could act on the origin of replication of three other related plasmids pS194, pC223 and pUB112.     

Mobilization functions of the bacteriocinogenic plasmid pRJ6 of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis>

Plasmid pRJ6 is the first known bacteriocinogenic mobilizable (Mob) plasmid of Staphylococcus aureus. Its Mob region is composed of four mob genes (mobCDAB) arranged as an operon, a genetic organization uncommon among S. aureus Mob plasmids. oriT _pRJ6 was detected in a region of 431 bp, positioned immediately upstream of mobC. This region, when cloned into pCN37, was able to confer mobilization to the re-combinant plasmid only in the presence of pRJ6. The entire Mob region, including oriT _pRJ6, is much more similar to Mob regions from several coagulase-negative staphylococci plasmids, although some remarkable similarities with S. aureus Mob plasmids can also be noted. These similarities include the presence within oriT _pRJ6 of the three mcb (MobC binding sites), firstly described in pC221 and pC223, an identical nick site also found in these same plasmids, and a nearly identical sra _pC223 site (sequence recognized by MobA). pRJ6 was successfully transferred to S. epidermidis by conjugation in the presence of the conjugative plasmid pGOl. Altogether these findings suggest that pRJ6 might have been originally a coagulase-negative staphylococci plasmid that had been transferred successfully to S. aureus.     

Expression of chloramphenicol resistance specified by plasmid pHY416 hosted inCorynebacterium glutamicum

Chloramphenicol (Cm)-resistant colonies ofCorynebacterium glutamicum strain AS019 hosting plasmid pHY416 occurred at a frequency of 4×10^–7 when this strain, which normally expresses kanamycin (Km) resistance only, was placed under positive selection. These isolates produced a chloramphenicol acetyltransferase (CAT) and were tenfold more resistant to Cm than the parent strain. Resistance was lost in the absence of Cm selection but could be reselected from Km-resistant clones by reapplying Cm selection. Restriction endonuclease analyses of plasmids extracted from Cm-sensitive and-resistant strains indicated that expression of CAT activity corresponded to a loss of 0.9 kb of DNA from plasmid pHY416.     

Worldwide distribution of the conjugative Clostridium perfringens tetracycline resistance plasmid, pCW3

The aim of this study was to test the hypothesis that all conjugative R-plasmids of Clostridium perfringens are closely related to the previously characterized tetracycline resistance plasmid, pCW3. Fourteen conjugative R-plasmids derived from 11 C. perfringens strains isolated in Australia, the United States, France, Belgium, and Japan were analyzed. Eleven of the plasmids encoded tetracycline resistance while three carried both tetracycline and chloramphenicol resistance. Each of these plasmids was compared, by restriction analysis, to the reference plasmid, pCW3. Seven of the tetracycline resistance plasmids had EcoRI, XbaI, and ClaI restriction profiles that were identical to those of the corresponding pCW3 digests. The seven remaining R-plasmids were different from pCW3. Comparison of partial restriction maps of these plasmids with a complete map of pCW3 indicated that they contained at least 17 kb of DNA that also was present in pCW3. Hybridization analysis confirmed that these plasmids shared substantial homology with pCW3. The three tetracycline and chloramphenicol resistance plasmids frequently lost a 6-kb chloramphenicol resistance segment during conjugation. Cloning experiments showed that the chloramphenicol resistance determinant was expressed in Escherichia coli and that the chloramphenicol resistance gene of one of these plasmids, pIP401, was contained within a 1.5-kb region of the 6-kb deletion segment. Hybridization analysis indicated that the deletion segment of pIP401 was related to those of the other two chloramphenicol resistance plasmids. During the course of this study, conjugative R-plasmids which appear to be identical to pCW3 or closely related to pCW3 were identified from C. perfringens strains from human, animal and environmental sources in five countries. It is concluded that C. perfringens strains in humans and animals throughout the world have overlapping gene pools and that all the conjugative C. perfringens R-plasmids examined probably evolved from a pCW3-like element.     

Identification of a transferable tetracycline resistance plasmid (pCW3) from Clostridium perfringens

A tetracycline- and chloramphenicol-resistant strain of Clostridium perfringens, CW92, was shown to carry two plasmids, pCW2 and pCW3. Twenty-four independently derived tetracycline-sensitive mutants were isolated using a variety of curing agents. All were missing pCW3 but still carried pCW2. Tetracycline resistance could be transferred to a sensitive recipient strain by what appears to be a conjugation-like process. The efficiency of transfer was 2.8 × 10⁻⁵ transcipients per viable donor cell after a 20-h mating. The transcipients transferred tetracycline resistance at a similar frequency. Ten independently derived tetracycline-resistant transcipients all carried pCW3 as shown by agarose gel electrophoresis. The identity of this plasmid in one of these strains was confirmed by electron microscopy and restriction endonuclease analysis. Therefore, pCW3 (30.6 megadaltons) is a transferable tetracycline-resistance plasmid. No chloramphenicol-sensitive mutants or chloramphenicol-resistant transcipients were isolated. Therefore, pCW2 (36.4 megadaltons) remains cryptic.     

Physical characterization of plasmids from Streptomyces kasugaensis MB273

Plasmid DNA of molecular weight 6.8 × 10⁶ was isolated from Streptomyces kasugaensis MB273. The plasmid DNA showed a single CsCl-ethidium bromide density gradient centrifugation, in neutral sucrose gradient centrifugation, and in agarose gel electrophoresis. When this DNA was digested with BamHI or SalI endonucleases, an unexpected number of fragments were found on agarose gel electrophoresis. Molecular weight summation of fragments obtained from double restriction enzyme digestions suggested that the plasmid DNA was a mixture of two different plasmids. This was confirmed by constructing recombinant plasmids between S. kasugaensis plasmid DNA and pBR322, and then by isolating two plasmids after SalI endonuclease treatment followed by sucrose gradient centrifugation. One of the plasmids (pSK1) had a single recognition site for BamHI, EcoRI, and SalI, and three sites for BglII. The other plasmid (pSK2) had a single recognition site for EcoRI and BglII, two recognition sites for BamHI, and no cleavage site for SalI. The cleavage maps of these plasmids were constructed using several restriction endonucleases.     

Specific pattern of instability of Escherichia coli HisG gene cloned in Bacillus subtilis via the Staphylococcus aureus plasmid pCS194

The plasmid pCS194, generated in vivo by recombination of two Staphylococcus aureus plasmids, pC194 and pS194, coding, respectively, for chloramphenicol (Cm) and streptomycin (Sm) resistance, can be replicated also in Bacillus subtilis in the presence of either of the two antibiotics. In their absence, no segregation of the individual components is observed, but the whole plasmid is lost at a rate of about 10% per generation. The unique EcoRI site of pCS194 is located in the Sm^R determinant. EcoRI-cleaved pCS194 has been joined to an EcoRI-linearized Escherichia coli replicon, the in vitro recombinant pHisG plasmid, composed of the vector pBR313 plus a BglII-segment of E. coli chromosomal DNA, containing a functional hisG gene. The ligation mixture has been used to transform either E. coli or B. subtilis. Following E. coli transformation and selection for Ap^R and Cm^R (the latter is expressed in E. coli by the pC194 determinant), two his⁺ clones were picked at random and the plasmids extracted. These appear identical and contain the original segments. Conversely, after transformation of B. subtilis and selection for Cm^R, only his^? clones have been obtained. From them, deleted plasmids have been extracted. They have lost part or, more frequently, all of the E. coli DNA insert. In the latter case also most of the bracketing pS194 sequence has been lost, and the resulting plasmids are almost identical to pC194, the Cm^R parent of pCS194. When the intact recombinant plasmids, isolated from his⁺ Ap^R Cm^RE. coli clones, have been used to transform B. subtilis cells for Cm^R, again deleted plasmids almost identical to pC194 have been obtained. The events causing these rearrangements occur after in vitro ligation, during either transformation or early propagation of the plasmids, and are probably caused by a translocatable element present in pCS194. A detailed physical map of pC194, carrying the restriction sites for HindIII, HaeIII, HpaII, MboII, AluI, HhaI, and BglI, is presented.     

The effect of restriction on shotgun cloning and plasmid stability in Bacillus subtilis Marburg

Summary Using the bifunctional cloning vehicle pHP13, which carries the replication functions of the cryptic Bacillus subtilis plasmid pTA1060, the effects of BsuM restriction on the efficiency of shotgun cloning of heterologous Escherichia coli DNA were studied. In a restriction-deficient but modification-proficient mutant of B. subtilis, clones were obtained at a high frequency, comparable to frequencies normally obtained in E. coli (10⁴ clones per g target DNA). Large inserts were relatively abundant (26% of the clones contained inserts in the range of 6 to 15 kb), which resulted in a high average insert length (3.6 kb). In the restriction-proficient B. subtilis strain, the class of large inserts was underrepresented. Transformation of B. subtilis with E. coli-derived individual recombinant plasmids was affected by BsuM restriction in two ways. First, the transforming activities of recombinant plasmids carrying inserts larger than 4 kb, were, in comparison with the vector pHP13, reduced to varying degrees in the restricting host. The levels of the reduction increased with insert length, resulting in a 7800-fold reduction for the largest plasmid used (pC23; insert length 16 kb). Second, more than 80% of the pC23 transformants in the restricting strain contained a deleted plasmid. In the non-restricting strain, the transforming activities of the plasmids were fairly constant as a function of insert length (in the range of 0–16 kb), and no structural instability was observed. It is concluded that for shotgun cloning in B. subtilis, the use of restriction-deficient strains is highly preferable. Evidence is presented that in addition to XhoI other sequences are involved in BsuM restriction. It is postulated that AsuII sites are additional target sites for BsuM restriction.     

Identification and Characterization of a Shuttle Plasmid with Antibiotic Resistance Gene from <Emphasis Type="Italic">Staphylococcus aureus</Emphasis>

While studying antibiotic-resistant plasmids from multi-drug-resistant nosocomial Staphylococcus aureus strains, we isolated a small (2.889 kb) chloramphenicol-resistant (Cm^r) plasmid, which was designated as pMC524/MBM. The molecular size of pMC524/MBM was close to that of pC194 (2.910 kb), a well-known Cm^r staphylococcal plasmid. Unlike pC194, this plasmid can replicate and express itself efficiently and stably in Escherichia coli. However, Cm is needed for stable maintenance of pMC524/MBM in different hosts. In this study, the nucleotide sequences of these two plasmids were compared after sequencing of pMC524/MBM [EMBL Accession No. AJ312056 SAU312056]. Although these two plasmids have striking nucleotide sequence homology, the Plus Origin, Minus Origin, the replication protein (Rep), and the chloramphenicol acetyl transferase (Cat) have considerable variations. Possibly, these changes have modulated pMC524/MBM into an efficient shuttle-plasmid. Received: 8 April 2002 / Accepted: 27 July 2002     

Molecular cloning in streptococci: Physical mapping of the vehicle plasmid pSM10 and demonstration of intergroup DNA transfer

Summary The streptococcal resistance plasmid pSM10 (8.3 kb), a deletion derivative of pSM10419 (22.9 kb) determining constitutive erythromycin and lincomycin resistance, was physically mapped with the restriction endonucleases AvaI, AvaII, EcoRI, HpaI, KpnI, PvuII (one site each), HindIII, HaeII (three sites each), HincII (four sites), and HhaI (five sites). Using the cryptic plasmid pVA318 as cloning vehicle, the largest HindIII fragment of pSM10 (3.3 kb) was shown to contain the erythromycin/lincomycin resistance gene(s) of the plasmid. The AvaII site of pSM10 proved to be suitable as a site for cloning AvaII-generated chromosomal DNA fragments from a group C streptococcal strain in the Challis strain of Streptococcus sanguis (group) H. A detailed physical map of the chimeric plasmid pSM10221 (12.8 kb), a fusion product of pSM10 and the staphylococcal chloramphenicol resistance plasmid pC221 (4.5 kb), is also presented. The plasmid chimera has properties making it potentially useful in development of a doubly selective streptococcal cloning vehicle by searching for insertional inactivation.     

Structural relationships among chloramphenicol-resistance plasmids of Staphylococcus aureus

Abstract Twelve different chloramphenicol-resistance (Cm^r) plasmids detected in Staphylococcus aureus strains isolated between 1952 and 1981 were characterized by restriction endonuclease, DNA hybridization and heteroduplex analyses. These studies revealed three families of Cm^r plasmids which were distinguished by their chloramphenicol acetyltransferase sequences; the prototype plasmids of the families were pC221, pC223 and pC194. The cat and replication ( rep ) genes of the plasmid pC221 were highly conserved in other pC221 family members and were related to their homologs in the pC223 family plasmids; however, the cat and rep genes of the pC194 family plasmids were distinct.