Bacillus licheniformis APase I gene promoter: a strong well-regulated promoter in B. subtilis

The 5' regulatory region and the portion of the structural gene coding for the amino-terminal sequence of alkaline phosphatase I (APase I) were isolated from Bacillus licheniformis MC14 using a synthetic oligodeoxynucleotide deduced from the amino acid sequence of the enzyme. The DNA sequence analysis of this region revealed an open reading frame of 129 amino acids containing the amino-terminal sequence of the mature APase protein. The protein sequence was preceded by a putative signal sequence of 32 amino acid residues. The predicted amino acid sequence of the partial APase clone as well as the experimentally determined amino acid sequence of the enzyme indicated that B. licheniformis APase retains the important features conserved among other APases of Bacillus subtilis, Escherichia coli, Saccharomyces cerevisiae, and various human tissues. Heterologous expression studies of the promoter using a fusion with the lacZ gene indicated that it functions as a very strong inducible promoter in B. subtilis that is tightly regulated by phosphate concentration.     

A gene (sleB) encoding a spore cortex-lytic enzyme from Bacillus subtilis and response of the enzyme to L-alanine-mediated germination.

The Bacillus subtilis sleB gene, which codes for the enzyme homologous to the germination-specific amidase from Bacillus cereus, was cloned and its nucleotide sequence was determined. Sequence analysis showed that it had an open reading frame of 918 bp, coding for a polypeptide of 305 amino acids with a putative signal sequence of 29 residues. Enzyme activity was not found in germination exudate of B. subtilis spores, which differs from the case of B. cereus enzyme. A B. subtilis mutant with an insertionally inactivated sleB gene revealed normal behavior in growth and sporulation. However, the sleB mutant was unable to complete germination mediated by L-alanine.     

Cloning and nucleotide sequencing of a novel 7 beta-(4-carboxybutanamido)cephalosporanic acid acylase gene of Bacillus laterosporus and its expression in Escherichia coli and Bacillus subtilis.

A strain of Bacillus species which produced an enzyme named glutaryl 7-ACA acylase which converts 7 beta-(4-carboxybutanamido)cephalosporanic acid (glutaryl 7-ACA) to 7-amino cephalosporanic acid (7-ACA) was isolated from soil. The gene for the glutaryl 7-ACA acylase was cloned with pHSG298 in Escherichia coli JM109, and the nucleotide sequence was determined by the M13 dideoxy chain termination method. The DNA sequence revealed only one large open reading frame composed of 1,902 bp corresponding to 634 amino acid residues. The deduced amino acid sequence contained a potential signal sequence in its amino-terminal region. Expression of the gene for glutaryl 7-ACA acylase was performed in both E. coli and Bacillus subtilis. The enzyme preparations purified from either recombinant strain of E. coli or B. subtilis were shown to be identical with each other as regards the profile of sodium dodecyl sulfate-polyacrylamide gel electrophoresis and were composed of a single peptide with the molecular size of 70 kDa. Determination of the amino-terminal sequence of the two enzyme preparations revealed that both amino-terminal sequences (the first nine amino acids) were identical and completely coincided with residues 28 to 36 of the open reading frame. Extracellular excretion of the enzyme was observed in a recombinant strain of B. subtilis.     

Identification and sequence analysis of the Bacillus subtilis W23 xylR gene and xyl operator.

The xyl operator of Bacillus subtilis W23 was identified by deletion analysis of the xyl regulatory region as a 25-base-pair (bp) sequence located 10 bp downstream from the xyl promoter. The outer 10 bp of the xyl operator exhibit perfect palindromic symmetry, while 5 central bp are nonpalindromic. It was demonstrated that the penultimate base pair near the end of this sequence is important for repressor binding. The location of the xylR gene encoding the repressor was determined by its ability to mediate xylose-dependent repression of a xyl-cat fusion on a multicopy plasmid. The nucleotide sequence of 1,355 bp from this DNA was analyzed and contains an open reading frame with a coding capacity for 384 amino acids leading to a protein with a calculated molecular weight of 42,270. A mutant with a deletion in this reading frame showed no repression of the xyl-cat fusion. The coding sequence is preceded by a suitable ribosome-binding sequence and uses GTG as a start codon and TAA as a stop codon. The relationship of these results to corresponding data obtained from B. subtilis 168 is discussed.     

Cloning of aldB, which encodes alpha-acetolactate decarboxylase, an exoenzyme from Bacillus brevis.

A gene for alpha-acetolactate decarboxylase (ALDC) was cloned from Bacillus brevis in Escherichia coli and in Bacillus subtilis. The 1.3-kilobase-pair nucleotide sequence of the gene, aldB, encoding ALDC and its flanking regions was determined. An open reading frame of 285 amino acids included a typical N-terminal signal peptide of 24 or 27 amino acids. A B. subtilis strain harboring the aldB gene on a recombinant plasmid processed and secreted ALDC. In contrast, a similar enzyme from Enterobacter aerogenes is intracellular.     

Cloning and nucleotide sequence of the highly thermostable neutral protease gene from Bacillus stearothermophilus

The gene (nprM) for the highly thermostable neutral protease of Bacillus stearothermophilus MK232 was cloned in Bacillus subtilis using pTB53 as a vector. The nucleotide sequence of nprM and its flanking regions was determined. The DNA sequence revealed only one large open reading frame, composed of 1656 base pairs and 552 amino acid residues. A Shine-Dalgarno (SD) sequence was found 12 bases upstream from the translation start site (ATG). A possible promotor sequence (TTTTCC for the -35 region and TATTGT for the -10 region), which was nearly identical to the promoter for another thermostable neutral protease gene, nprT, was also found about 40 bases upstream of the SD sequence. The deduced amino acid sequence contained a signal sequence in its amino-terminal region. The sequence of the first five amino acids of purified extracellular protease completely matched residues 237-241 of the open reading frame. This suggests that the enzyme is translated as a large polypeptide containing a pre-pro structure as is known for other neutral proteases. The amino acid sequence of the extracellular form of this protease (316 amino acids, molecular mass 34,266 Da) was identical to that of the thermostable neutral protease (thermolysin) from Bacillus thermoproteolyticus except for two amino acid substitutions (Asp37 to Asn37 and Glu119 to Gln119). The G + C content of the coding region of nprM was 42 mol%, while that of the third letter of the codons was lower (36 mol%). This extremely low content is an exceptional case for genes from thermophiles. When the protease genes, nprM and nprT, were cloned on pTB53 in B. subtilis, the expression of nprM was about 20 times higher than that of nprT. The reason for the difference between the two systems is discussed.     

Cloning, nucleotide sequence, and expression in Escherichia coli of the Bacillus stearothermophilus peroxidase gene (perA).

The gene encoding a thermostable peroxidase was cloned from the chromosomal DNA of Bacillus stearothermophilus IAM11001 in Escherichia coli. The nucleotide sequence of the 3.1-kilobase EcoRI fragment containing the peroxidase gene (perA) and its flanking region was determined. A 2,193-base-pair open reading frame encoding a peroxidase of 731 amino acid residues (Mr, 82,963) was observed. A Shine-Dalgarno sequence was found 9 base pairs upstream from the translational starting site. The deduced amino acid sequence coincides with those of the amino terminus and four peptides derived from the purified peroxidase of B. stearothermophilus IAM11001. E. coli harboring a recombinant plasmid containing perA produced a large amount of thermostable peroxidase which comigrated on polyacrylamide gel electrophoresis with the B. stearothermophilus peroxidase. The peroxidase of B. stearothermophilus showed 48% homology in the amino acid sequence to the catalase-peroxidase of E. coli.     

Nucleotide sequence and promoter region for the neutral protease gene from Bacillus stearothermophilus.

The thermostable neutral protease gene nprT of Bacillus stearothermophilus was sequenced. The DNA sequence revealed only one large open reading frame, composed of 1,644 bases and 548 amino acid residues. A Shine-Dalgarno sequence was found 9 bases upstream from the translation start site (ATG), and the deduced amino acid sequence contained a signal sequence in its amino-terminal region. The sequence of the first 14 amino acids of purified extracellular protease completely matched that deduced from the DNA sequence starting at GTC (Val), 687 bases (229 amino acids) downstream from ATG. This suggests that the protease is translated as a longer polypeptide. The amino acid sequence of the extracellular form of this protease (319 amino acids) was highly homologous to that of the thermostable neutral protease from Bacillus thermoproteolyticus but less homologous to the thermolabile neutral protease from Bacillus subtilis. A promoter region determined by S1 nuclease mapping (TTTTCC for the -35 region and TATTTT for the -10 region) was different from the conserved promoter sequences recognized by the known or factors in bacilli. However, it was very homologous to the promoter sequence of the spo0B gene from B. subtilis. The guanine-plus-cytosine content of the coding region of the nprT gene was 58 mol%, while that of the third letter of the codons was much higher (72 mol%).     

Expression and nucleotide sequence of the Lactobacillus bulgaricus beta-galactosidase gene cloned in Escherichia coli.

The Lactobacillus bulgaricus beta-galactosidase gene was cloned on a ca. 7-kilobase-pair HindIII fragment in the vector pKK223-3 and expressed in Escherichia coli by using its own promoter. The nucleotide sequence of the gene and approximately 400 bases of 3'- and 5'-flanking sequences was determined. The amino acid sequence of the beta-galactosidase, deduced from the nucleotide sequence of the gene, yielded a monomeric molecular mass of ca. 114 kilodaltons, slightly smaller than the E. coli lacZ and Klebsiella pneumoniae lacZ enzymes but larger than the E. coli evolved (ebgA) beta-galactosidase. The cloned beta-galactosidase was found to be indistinguishable from the native enzyme by several criteria. From amino acid sequence alignments, the L. bulgaricus beta-galactosidase has a 30 to 34% similarity to the E. coli lacZ, E. coli ebgA, and K. pneumoniae lacZ enzymes. There are seven regions of high similarity common to all four of these beta-galactosidases. Also, the putative active-site residues (Glu-461 and Tyr-503 in the E. coli lacZ beta-galactosidase) are conserved in the L. bulgaricus enzyme as well as in the other two beta-galactosidases mentioned above. The conservation of active-site amino acids and the large regions of similarity suggest that all four of these beta-galactosidases evolved from a common ancestral gene. However, these enzymes are quite different from the thermophilic beta-galactosidase encoded by the Bacillus stearothermophilus bgaB gene.     

Thermostable chitosanase from Bacillus sp. Strain CK4: cloning and expression of the gene and characterization of the enzyme

A thermostable chitosanase gene from the environmental isolate Bacillus sp. strain CK4, which was identified on the basis of phylogenetic analysis of the 16S rRNA gene sequence and phenotypic analysis, was cloned, and its complete DNA sequence was determined. The thermostable chitosanase gene was composed of an 822-bp open reading frame which encodes a protein of 242 amino acids and a signal peptide corresponding to a 30-kDa enzyme. The deduced amino acid sequence of the chitosanase from Bacillus sp. strain CK4 exhibits 76.6, 15.3, and 14.2% similarities to those from Bacillus subtilis, Bacillus ehemensis, and Bacillus circulans, respectively. C-terminal homology analysis shows that Bacillus sp. strain CK4 belongs to cluster III with B. subtilis. The gene was similar in size to that of the mesophile B. subtilis but showed a higher preference for codons ending in G or C. The enzyme contains 2 additional cysteine residues at positions 49 and 211. The recombinant chitosanase has been purified to homogeneity by using only two steps with column chromatography. The half-life of the enzyme was 90 min at 80 degrees C, which indicates its usefulness for industrial applications. The enzyme had a useful reactivity and a high specific activity for producing functional oligosaccharides as well, with trimers through hexamers as the major products.     

The gene amyE(TV1) codes for a nonglucogenic alpha-amylase from Thermoactinomyces vulgaris 94-2A in Bacillus subtilis.

We isolated the gene amyE(TV1) from Thermoactinomyces vulgaris 94-2A encoding a nonglucogenic alpha-amylase (AmyTV1). A chromosomal DNA fragment of 2,247 bp contained an open reading frame of 483 codons, which was expressed in Escherichia coli and Bacillus subtilis. The deduced amino acid sequence of the AmyTV1 protein was confirmed by sequencing of several peptides derived from the enzyme isolated from a T. vulgaris 94-2A culture. The amino acid sequence was aligned with several known alpha-amylase sequences. We found 83% homology with the 48-kDa alpha-amylase part of the Bacillus polymyxa beta-alpha-amylase polyprotein and 50% homology with Taka amylase A of Aspergillus oryzae but only 45% homology with another T. vulgaris amylase (neopullulanase, TVA II) recently cloned from strain R-47. The putative promoter region was characterized with primer extension and deletion experiments and by expression studies with B. subtilis. Multiple promoter sites (P3, P2, and P1) were found; P1 alone drives about 1/10 of the AmyTV1 expression directed by the native tandem configuration P3P2P1. The expression levels in B. subtilis could be enhanced by fusion of the amyE(TV1) coding region to the promoter of the Bacillus amyloliquefaciens alpha-amylase gene.     

Molecular basis of isozyme formation of beta-galactosidases in Bacillus stearothermophilus: isolation of two beta-galactosidase genes, bgaA and bgaB.

Bacillus stearothermophilus IAM11001 produced three beta-galactosidases, beta-galactosidase I, II, and III (beta-gal I, II, and III), which are detectable by polyacrylamide (nondenatured) gel electrophoresis. By connecting restriction fragments of the chromosomal DNA to plasmid vectors, followed by transformation of Escherichia coli, two beta-galactosidase genes (bgaA and bgaB) located close to each other on the chromosome were isolated. Identification of the gene products and Southern hybridization analyses with a 2.7-kilobase-pair EcoRI fragment containing the bgaA gene as probe revealed that a single bgaA gene exists on the genome and that beta-gal II and beta-gal III consist of a common subunit (the bgaA gene product; molecular weight, 120,000), but differ in their assembly (beta-gal II is a dimer, and beta-gal III is a tetramer). The bgaB gene product (molecular weight, 70,000) in Bacillus subtilis harboring pHG5 (a hybrid plasmid consisting of pUB110 and a 2.9-kilobase-pair EcoRI fragment) was estimated to be the beta-gal I protein from its heat stability. Southern hybridization and immunological testing indicated that the two genes have no homology.     

Molecular cloning, DNA sequence, and expression of the gene encoding for thermostable pectate lyase of thermophilic Bacillus sp. TS 47

The gene that encodes a thermostable pectate lyase (called PL 47), from Bacillus sp. TS 47, was cloned, sequenced, and expressed in mesophilic B. subtilis. The gene contained an open reading frame consisting of 1326 bp, which encoded 441 amino acids. The deduced amino acid sequence of the mature enzyme (416 amino acids with a calculated molecular mass of 47,262 Da), showed 52% similarity with PL (BsPel) from mesophilic B. subtilis SO113. The structure-based alignment of the deduced amino acid sequence of PL 47 with that of BsPel suggested that PL 47 might have a parallel beta-helix structure with three long loops. The amino acids making up PL 47 are richer in hydrophobic amino acids and glutamic acid than BsPel. The hydropathy profile of PL 47 indicated that the amino acid sequences around putative calcium binding sites are more hydrophobic than the same region of BsPel. The gene product expressed in B. subtilis as the host was stable up to 70 degrees C and the reaction was optimal around 70 degrees C, as well as native PL 47.     

Nucleotide sequence and expression of a Streptomyces griseosporeus proteinaceous alpha-amylase inhibitor (HaimII) gene.

The coding region of the alpha-amylase inhibitor (HaimII) gene from the producing strain Streptomyces griseosporeus YM-25 was localized on an 800-base-pair DNA segment. The nucleotide sequence of a 1,191-base-pair region including the HaimII gene was determined by the dideoxy-chain termination method. The nucleotide sequence data predicted an open reading frame of 363 base pairs starting with an ATG initiation codon and ending with a TGA translational stop codon. The amino acid sequence deduced from the nucleotide sequence indicated that the presumptive pre-HaimII protein extends 37 amino acids to the amino terminus and 6 amino acids to the carboxyl terminus of the mature HaimII protein. The pre-HaimII protein is believed to be processed both during and after secretion. Two forms of the inhibitor, which have a higher molecular weight than that of the HaimII protein isolated from S. griseosporeus, were partially purified from the culture filtrate of Streptomyces lividans containing the cloned HaimII gene.