Quantitative determination of overlapped proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis

A method for resolving an overlapped polypeptide pattern of sodium dodecyl sulfate-polyacrylamide gel electrophoresis was described. The procedure was essentially a Gaussian fitting using the least squares method, and could resolve more than 20 overlapped components simultaneously. The applicability to overlapped and shouldered patterns was evaluated using practical electrophoretic data with varying amounts of mitochondrial samples. The relative contents of respective polypeptide components gave a good agreement regardless of the loaded amounts.     

Fluorescent monitoring of proteins during sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western blotting

Fluorescent labeling of proteins was found to be a very sensitive and reliable alternative to conventional methods for monitoring proteins on Western blots. Proteins were labeled with 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF) before SDS-PAGE. After electrophoresis and subsequent electro-blotting the fluorescent-labeled proteins were visible upon ultraviolet illumination of the nitrocellulose membranes, and could be photographed to yield an accurate record of the blots before subsequent serological analysis. The sensitivity for detecting MDPF-labeled proteins on nitrocellulose was 100-200 ng, 50 to 100 fold less sensitive than on gels. Fluorescent-labeled TMV and MStpV capsid proteins that were blotted onto nitrocellulose still reacted in serological tests and were detected when present in quantities as low as 100 pg. Fluorescent labeling allows accurate photographic records of the SDS-gel, blot and probed blot using only one sample, and no subsequent staining steps are required.     

Extraction of proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis from protease-rich plant tissues

A method of extracting proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis from plant tissues with high protease activity was described. It resolved protein bands in highmolecular-weight regions of the gel and replaced commonly used procedures which showed severe degradation of proteins, even in the presence of protease inhibitors.     

One-step casting of Laemmli discontinued sodium dodecyl sulfate-polyacrylamide gel electrophoresis gel

A modified Laemmli sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) protocol is described. The new method saves 30 min for gel casting without loss of the resolution power of Laemmli gel. In this method, both the upper and lower gels can be cast at the same time because the lower gel contains 10% glycerol, which generates higher density in the lower gel than in the upper gel.     

Mobility of acetylated histones in sodium dodecyl sulfate-polyacrylamide gel electrophoresis

We describe an altered mobility for acetylated histone isoforms in sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Isoforms of histones H3 and H4 with a higher acetylation degree have a slightly faster electrophoretic mobility. Since acetylation neutralizes the positive charge of the epsilon-amino group of lysine, without significantly changing the molecular mass of the protein, the acetylation-dependent mobility shift could be explained by the increase of the net negative charge of the SDS-histone complexes. A possible consequence of this differential mobility for the acetylation site determination by protein microsequencing from SDS gels is discussed.     

Classification of Clostridium butyricum based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis and pulsed-field gel electrophoresis

Eleven strains of Clostridium butyricum collected from different sources were analysed by both sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and pulsed-field gel electrophoresis (PFGE). The strains could be classified into four groups based on their banding profiles of the proteins extracted from the cells on SDS-PAGE. Group I consisted of seven strains, and these strains were further divided into five subgroups by PFGE. The strains belonging to groups II, III, and IV on SDS-PAGE were also classified into the same II to IV groups by PFGE. These data indicate that grouping of the strains of C. butyricum can be performed by employing both SDS-PAGE and PFGE.     

Preparative elution of proteins from nitrocellulose membranes after separation by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Various conditions were analyzed and optimized for the preparative elution of proteins from nitrocellulose membranes after transfer from sodium dodecyl sulfate (SDS)-polyacrylamide gels. The efficiency of elution was best using pyridine or acetonitrile elution solvents, intermediate for buffer containing a mixture of sodium dodecyl sulfate, Triton X-100, and sodium deoxycholate, and negligible for buffers containing any single detergent or chaotropic salt, such as urea or guanidine hydrochloride. The efficiency of elution with any solvent also depended on the molecular weight of the proteins, smaller proteins being more easily removed from membranes. As a general procedure, proteins may be eluted from nitrocellulose membranes by incubation with either 40% acetonitrile or 50% pyridine in 0.1 M ammonium acetate, pH 8.9, for 1-3 h at 5-37 degrees C. The recommended procedures for protein elution appear to offer a rapid, simple, and efficient means of recovering proteins from complex mixtures after separation by SDS-PAGE and transfer to nitrocellulose membranes.     

New method for analyzing the molecular weights of proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Previously the method for determining protein molecular weights from SDS-PAGE depended on the accidental, only partial linearity of protein movement with the logarithm of its molecular weight. A new, mathematically rigorous method with supporting data is now described demonstrating that such movement is dependent upon the reciprocal of protein size. Experimental data, therefore, follow most closely a hyperbolic curve when plotted directly; it becomes linear and passes through the origin when movement is plotted vs the reciprocal of protein molecular weight. In the earlier method determination of the error of a measurement of molecular weight is very complex and never determined. In the method presented here such error is easily estimated and it is identical in both the hyperbolic and linear forms of data presentation. This method may eventually also allow other less-significant forces controlling movement such as protein charge to be analyzed and understood.     

Lysozyme activity in animal extracts after sodium dodecyl sulfate-polyacrylamide gel electrophoresis

1. Lysozyme activity was detected after electrophoresis in sodium dodecyl sulfate-polyacrylamide gels containing 0.2% (W/V) autoclaved Micrococcus lysodeikticus cells as substrate. 2. Lysozyme activity appeared as clear lysis zones after incubation of opaque gels at 37 degrees C in buffered Triton X-100. 3. As low as 0.1 pg of purified hen egg white lysozyme could be detected after 16 hr incubation at pH 6.5. 4. Bands with lytic activity from kidney and pancreas acetone powders, bird's egg whites and vitelline membranes, animal sera and human saliva corresponded to c-type (Mr 14,500), g-type (Mr 20,500) or both lysozymes as far as molecular weight is concerned. 5. Some extracts, like porcine kidney, exhibited more than two bands. 6. Bands with lytic activity migrating at the level of g-type lysozymes were detected in some kidney and pancreas extracts.     

Artifacts in sodium dodecyl sulfate-polyacrylamide gel electrophoresis due to 2-mercaptoethanol

Mercaptoethanol, when present in the sample buffer during sodium dodecyl sulfate-polyacrylamide gel electrophoresis, is responsible for the appearance of two nonprotein bands (electrophoretic mobilities corresponding to 68 and 54 kdalton) stainable with silver and with Coomassie blue. After iodination in vitro of DNA preparations isolated by alkaline phenol extraction using chloramine-T procedure, part of the radioactive label is found in these bands, provided the reaction is terminated by mercaptoethanol, whereas only a diffuse background is present in this area if the reaction is stopped by sodium metabisulfite. Similar results are obtained with highly purified total cytoplasmic RNA. The results indicate that the appearance of the 68- and 54-kdalton bands is in artifact. The relevance of these results to the proteins tightly bound to DNA is discussed.     

Identification and subgrouping of Frankia strains using sodium dodecyl sulfate-polyacrylamide gel electrophoresis

Polypeptide patterns of soluble proteins from 35 Frankia strains from different plants of various geographical origins, belonging to Alnus and Elaeagnus host-specificity groups were determined by one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The polypeptide pattern was qualitatively the same for each strain whatever the number of subcultures or the age. Two gel electrophoresis groups A and E were observed which matched with the Alnus and Elaeagnus host-specificity groups, but with some exceptions. The polypeptide patterns of the 35 Frankia strains tested were separated into 13 gel electrophoresis subgroups. Five Frankia strains were inoculated separately or in 3 mixed combinations of 2 strains on Alnus glutinosa (L.) Gaertn. plants. The polypeptide patterns of the re-isolates obtained from 5-month-old nodules were identical to the corresponding strains used initially in the inoculum. Dual infection was observed on single plantlets.     

Applications of tandem microbore liquid chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis/electroblotting in microsequence analysis

Protein isolation by microbore HPLC is compared with sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE)/electroblotting methods for several major proteins from rabbit muscle. Although single-mode HPLC or SDS-PAGE/electroblotting provides excellent speed and sensitivity for submicrogram-level protein purification, neither one alone has adequate resolution for separating such a complex protein mixture. Tandem procedures, utilizing two different modes of HPLC in separate steps or a combination of single HPLC separation and SDS-PAGE/electroblotting, offer the necessary versatility. One of the major concerns in this investigation was to evaluate electroblotting techniques for microsequencing. The Aebersold et al. procedure (R.H. Aebersold, D.B. Teplow, L.E. Hood, and S.B.H. Kent (1986) J. Biol. Chem. 261, 4229-4238) was substantially modified and improved; the details of this work will be published elsewhere. These changes significantly improve repetitive yields at the low microgram level without producing high backgrounds. At lower levels the recovery of sequenceable protein currently limits our ability to obtain useful results. Starting with 250-750 micrograms of rabbit muscle crude extract, several proteins (15-70 kDa) were isolated by tandem microbore LC and PAGE/electroblotting for amino-terminal sequence analysis. It appears that the combination of electroblotting and microbore LC represents a powerful approach for microsample preparation.     

Renaturation of Leishmania donovani 3'-nucleotidase following sodium dodecyl sulfate-polyacrylamide gel electrophoresis

1. Renaturation of a 3'-nucleotidase from the surface membrane of Leishmania donovani promastigotes was achieved following polyacrylamide gel electrophoresis (PAGE) in the presence of sodium dodecyl sulfate (SDS). 2. Enzyme activity was detected in situ in gels, following SDS removal, by incubating the gels in reaction mixtures containing 3'-AMP or 3'-UMP as substrate followed by staining for the inorganic phosphate (Pi) reaction product with malachite green-molybic acid solution. 3. Conditions for the removal of SDS by diffusion and for the renaturation of enzyme activity are described including evidence for the detergent requirement, which is best satisfied by 3[(3-cholamidopropyl)-dimethylammonio]2-hydroxy-1-propane sulfonate (CHAPSO). 4. Results indicate that the 3'-nucleotidase migrates under these conditions as a polypeptide with an Mr of 43,000.     

Mixed anionic detergent/aliphatic alcohol-polyacrylamide gel electrophoresis alters the separation of proteins relative to conventional sodium dodecyl sulfate-polyacrylamide gel electrophoresis

The order and relative mobility of proteins on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) is affected by unknown components that are differentially present in SDS preparations obtained from different sources [J.B. Swaney, G.F. Vande Woude, and H.L. Bachrach (1974) Anal. Biochem. 58, 337-346]. The modified separation capabilities of such SDS preparations are useful but the use of this phenomenon in a controlled manner requires that the components responsible for the altered separation be identified. Accordingly, this paper describes a polyacrylamide gel electrophoresis system [mixed alcohol/detergent-polyacrylamide gel electrophoresis (MAD-PAGE)] that employs a mixture of alcohol and detergent instead of SDS alone to modify and enhance protein separation relative to conventional SDS-PAGE. A defined mixture consisting of four sulfated alkyl detergents (dodecyl sulfate, tetradecyl sulfate, hexadecyl sulfate, octadecyl sulfate) as well as the four alcohols of corresponding aliphatic chain length was found to be effective at duplicating the electrophoretic effect of USP-grade SDS and thus changed the relative order and position of polypeptides on electrophoresis relative to conventional SDS-PAGE. This method serves as an adjunct to conventional SDS-PAGE by providing another means of resolving proteins that are not normally resolved by SDS-PAGE. Further, it was found that MAD-PAGE is capable of resolving the NS1 protein of influenza virus into three fractions, whereas conventional SDS-PAGE yields one electrophoretic species. Reelectrophoresis of these novel NS1 bands by conventional SDS-PAGE indicated that they were not modified during MAD-PAGE and probably represented distinct molecular forms present in infected cells.(ABSTRACT TRUNCATED AT 250 WORDS)     

Simple, time-saving dye staining of proteins for sodium dodecyl sulfate-polyacrylamide gel electrophoresis using Coomassie blue

A fixation-free and fast protein-staining method for sodium dodecyl sulfate-polyacrylamide gel electrophoresis using Coomassie blue is described. The protocol comprises staining and quick washing steps, which can be completed in 0.5 h. It has a sensitivity of 10 ng, comparable with that of conventional Coomassie Brilliant Blue G staining with phosphoric acid in the staining solution. In addition, the dye stain does not contain any amount of acid and methanol, such as phosphoric acid. Considering the speed, simplicity, and low cost, the dye stain may be of more practical value than other dye-based protein stains in routine proteomic research.     

An evaluation of sodium dodecyl sulfate-polyacrylamide gel electrophoresis for the identification of microsporidia

Microsporidian spore polypeptides separated with sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE) can be used to identify isolates of microsporidia. The spore polypeptides separated with SDS/PAGE provided unique, reproducible electrophoretic profiles which were not influenced by host species or the temperature at which the host larvae were maintained for development. Furthermore, host proteins were not detected in electrophoretic profiles of the spore polypeptides. Spore mixtures of two microsporidian species can be detected when the spore polypeptides of either or both species have been previously separated with SDS/PAGE.     

Prefractionation of protein samples for proteome analysis by sodium dodecyl sulfate-polyacrylamide gel electrophoresis

To isolate high molecular weight (HMW) or low-abundance proteins we exploited the high resolving power provided by the molecular sieves of polyacrylamide gel matrices. Rice-leaf protein extracts were applied to a single well of an SDS-polyacrylamide gel with prestained molecular size markers at both ends. After electrophoresis, the gel was cut into 4 segments according to size, and each segment was ground in extraction buffer. The eluted proteins were separated from the gel matrix by centrifugation followed by acetone precipitation, and the precipitated proteins were subjected to SDS-PAGE and 2-DE. The SDS-PAGE-based prefractionation method provided non-overlapping discrete sample pools. About 27% more protein spots were detected in the fractionated samples than in the unfractionated samples, and 17% were enhanced. The improvement was especially prominent in the case of HMW proteins. Well-separated HMW proteins were analyzed by MALDI-TOF mass spectrometry. The molecular masses of the identified proteins in the > 48 kDa gel segment were distributed between 50 and 112 kDa, thus validating this prefractionation method. Identified HMW proteins with similar mass but different pI were mostly isoforms. Thus SDS-PAGE-based size prefractionation provides improved separation and detection of HMW proteins.