Structure of a Ruminococcus albus endo-1,4-beta-glucanase gene.

A chromosomal DNA fragment encoding an endo-1,4-beta-glucanase I (Eg I) gene from Ruminococcus albus cloned and expressed in Escherichia coli with pUC18 was fully sequenced by the dideoxy-chain termination method. The sequence contained a consensus promoter sequence and a structural amino acid sequence. The initial 43 amino acids of the protein were deduced to be a signal sequence, since they are missing in the mature protein (Eg I). High homology was found when the amino acid sequence of the Eg I was compared with that of endoglucanase E from Clostridium thermocellum. Codon usage of the gene was not biased. These results suggested that the properties of the Eg I gene from R. albus was specified from the known beta-glucanase genes of the other organisms.     

Gene Cloning of Cellobiohydrolase II from the White Rot Fungus Irpex lacteus MC-2 and Its Expression in Pichia pastoris

A gene (cel4) coding for a cellobiohydrolase II (Ex-4) was isolated from the white rot basidiomycete, Irpex lacteus strain MC-2. The cel4 ORF was composed of 452 amino acid residues and was interrupted by eight introns. Its deduced amino acid sequence revealed a multi domain structure composed of a cellulose-binding domain, a linker, and a catalytic domain belonging to family 6 of glycosyl hydrolases, from the N-terminus. cel4 cDNA was successfully expressed in the yeast Pichia pastoris. Recombinant Ex-4 showed endo-processive degrading activity towards cellulosic substrates, and a synergistic effect in the degradation of Avicel was observed when the enzyme acted together with either cellobiohydrolase I (Ex-1) or endoglucanase (En-1) produced by I. lacteus MC-2.     

High-yield production of a bacterial xylanase in the filamentous fungus Trichoderma reesei requires a carrier polypeptide with an intact domain structure

A bacterial xylanase gene, Nonomuraea flexuosa xyn11A, was expressed in the filamentous fungus Trichoderma reesei from the strong cellobiohydrolase 1 promoter as fusions to a variety of carrier polypeptides. By using single-copy isogenic transformants, it was shown that production of this xylanase was clearly increased (up to 820 mg/liter) when it was produced as a fusion protein with a carrier polypeptide having an intact domain structure compared to the production (150 to 300 mg/liter) of fusions to the signal sequence alone or to carriers having incomplete domain structures. The carriers tested were the T. reesei mannanase I (Man5A, or MANI) core-hinge and a fragment thereof and the cellulose binding domain of T. reesei cellobiohydrolase II (Cel6A, or CBHII) with and without the hinge region(s) and a fragment thereof. The flexible hinge region was shown to have a positive effect on both the production of Xyn11A and the efficiency of cleavage of the fusion polypeptide. The recombinant Xyn11A produced had properties similar to those of the native xylanase. It constituted 6 to 10% of the total proteins secreted by the transformants. About three times more of the Man5A core-hinge carrier polypeptide than of the recombinant Xyn11A was observed. Even in the best Xyn11A producers, the levels of the fusion mRNAs were only approximately 10% of the level of cel7A (cbh1) mRNA in the untransformed host strain.     

A gene at 59 minutes on the Escherichia coli chromosome encodes a lipoprotein with unusual amino acid repeat sequences.

We report a 1.432-kb DNA sequence at 59 min on the Escherichia coli chromosome that connects the published sequences of the pcm gene for the isoaspartyl protein methyltransferase and that of the katF or rpoS (katF/rpoS) gene for a sigma factor involved in stationary-phase gene expression. Analysis of the DNA sequence reveals an open reading frame potentially encoding a polypeptide of 379 amino acids. The polypeptide sequence includes a consensus bacterial lipidation sequence present at residues 23 to 26 (Leu-Ala-Gly-Cys), four octapeptide proline- and glutamine-rich repeats of consensus sequence QQPQIQPV, and four heptapeptide threonine- and serine-rich repeats of consensus sequence PTA(S,T)TTE. The deduced amino acid sequence, especially in the C-terminal region, is similar to that of the Haemophilus somnus LppB lipoprotein outer membrane antigen (40% overall sequence identity; 77% identity in last 95 residues). The LppB lipoprotein binds Congo red dye and has been proposed to be a virulence determinant in H. somnus. Utilizing a plasmid construct with the E. coli gene under the control of a phage T7 promoter, we demonstrate the lipidation of this gene product by the incorporation of [3H]palmitic acid into a 42-kDa polypeptide. We also show that treatment of E. coli cells with globomycin, an inhibitor of the lipoprotein signal peptidase, results in the accumulation of a 46-kDa precursor. We thus designate the protein NlpD (new lipoprotein D). E. coli cells overexpressing NlpD bind Congo red dye, suggesting a common function with the H. somnus LppB protein. Disruption of the chromosomal E. coli nlpD gene by insertional mutagenesis results in decreased stationary-phase survival after 7 days.     

Secretion of thermophilic bacterial cellobiohydrolase in Saccharomyces cerevisiae

The partial DNA sequence corresponding to the N-terminal amino acid sequence of cellobiohydrolase derived from a thermophilic anaerobe NA10 was determined. The cellobiohydrolase gene fused to the secretion signal (signal peptide and T-S region) from Saccharomyces diastaticus was expressed in an ethanologenic yeast, S. cerevisiae YIY345, under control of the glucoamylase promoter. The recombinant yeast produced cellobiohydrolase: approximately 40% of the total cellobiohydrolase activity was detected in the medium, and the remaining cellobiohydrolase was localized in the intracellular fraction. An analysis of the N-terminal amino acid sequence of the main intracellular cellobiohydrolase revealed that the signal peptide and T-S region were removed proteolytically. Alteration of the amino acid residues at the cleavage site by insertion of a Bgl II linker led to an approximately 3.5-fold increase in the total cellobiohydrolase production, but did not affect the efficiency of secretion into the medium. Cellobiohydrolase production was not repressed in the presence of glucose. The recombinant yeast hydrolyzed carboxymethyl cellulose in the medium. The results suggest the possibility of the direct bioconversion of cellulose to ethanol by the recombinant yeast.     

Cloning, expression, and spectroscopic characterization of Cucumis sativus stellacyanin in its nonglycosylated form.

The cDNA encoding the 182 amino acid long precursor stellacyanin from Cucumis sativus was isolated and characterized. The protein precursor consists of four sequence domains: I, a 23 amino acid hydrophobic N-terminal signal peptide with features characteristic of secretory proteins; II, a 109 amino acid copper-binding domain; III, a 26 amino acid hydroxyproline- and serine-rich peptide characteristic of motifs found in the extension family, extracellular structural glycoproteins found in plant cell walls; and IV, a 22 amino acid hydrophobic extension. Maturation of the protein involves posttranslational processing of domains I and IV. The copper-binding domain (domain II), which shares high sequence identity with other stellacyanins, has been expressed without its carbohydrate attachment sites, refolded from the Escherichia coli inclusion bodies, purified, and characterized by electronic absorption, EPR, ESEEM, and RR spectroscopy. Its spectroscopic properties are nearly identical to those of stellacyanin from the Japanese lacquer tree Rhus vernicifera, the most extensively studied and best characterized stellacyanin, indicating that this domain folds correctly, even in the absence of its carbohydrate moiety. The presence of a hydroxyproline- and serine-rich domain III suggests that stellacyanin may have a function other than that of a diffusible electron transfer protein, conceivably participating in redox reactions localized at the plant cell wall, which are known to occur in response to wounding or infection of the plant.     

斜卧青霉114-2 cbh1基因的TAIL-PCR克隆及与抗阻遏突变株JU-A10的比较

[目的]研究斜卧青霉(Penicillium decumbens)114-2与其抗阻遏突变株JU-A10外切酶基因序列的差异.[方法]用热不对称交错PCR(TAIL-PCR)和RT-PCR扩增得到斜卧青霉114-2外切葡聚糖酶Ⅰ(cbh1)基因全长和cDNA全长.[结果]cbh1基因全长为1500 bp,含有两个内含子,编码453个氨基酸(GenBank,EF397602).克隆并分析了1.9 kb的cbh1基因上游序列,分别发现了葡萄糖代谢抑制因子CRE Ⅰ与纤维素酶转录调控蛋白ACE Ⅰ的两个的潜在结合位点.[结论]在相同的培养条件下,其抗阻遏突变株JU-A10的外切酶活明显高于野生株114-2.两菌株的cbh1基因序列完全一致,说明外切酶活明显提高不是由于cbh1基因发生突变引起的.     

Primary structure of a hormonally regulated beta-glucanase of Nicotiana plumbaginifolia

A cDNA clone for a hormonally regulated beta-glucanase from Nicotiana plumbaginifolia has been isolated by using an oligodeoxynucleotide probe, synthesized to match the previously determined N-terminal amino acid sequence. The cDNA has the complete sequence of the mature protein and contains at least part of a hydrophobic signal peptide. At the amino acid level, the beta-glucanase of N. plumbaginifolia is 73% homologous to a beta(1,3)-glucanase from tobacco and 52% homologous to a beta(1,3;1,4)-glucanase from barley. Southern-blot analysis clearly demonstrated that N. plumbaginifolia contains at least two related genes encoding beta-glucanase. The extent of the complete signal peptide of the cloned beta-glucanase was determined by sequencing part of the corresponding gene. Northern analysis showed that the expression of the beta-glucanase gene is influenced by auxins and cytokinins.     

Cloning and analysis of the gene (rpoDA) for the principal sigma factor of Pseudomonas aeruginosa

A gene (rpoDA) of Pseudomonas aeruginosa whose gene product has a homologous function and structure with the principal sigma factor of Escherichia coli was cloned and sequenced. The DNA region corresponding to one of the two hybridization signals found in P. aeruginosa DNA with a synthetic oligonucleotide probe (rpoD probe) was shown to be able to complement a temperature sensitive mutation of Escherichia coli rpoD gene. The amino acid sequence deduced from the nucleotide sequence of rpoDA showed an extensive homology with that of the principal sigma factor of E. coli throughout the entire region, which indicates that the two gene products have an essentially identical domain structure. A common basic structure observed among principal sigma factors of different eubacterial strains was proposed. RpoDA protein was identified in the extract of the cell carrying a plasmid clone with the rpoDA gene insert by Western blot analysis.     

A novel beta-glucanase gene from Bacillus halodurans C-125

A novel endo-beta-1,3(4)-D-glucanase gene was found in the complete genome sequence of Bacillus halodurans C-125. The gene was previously annotated as an "unknown" protein and assigned an incorrect open reading frame (ORF). However, determining the biochemical characteristics has elucidated the function and correct ORF of the gene. The gene encodes 231 amino acids, and its calculated molecular mass was estimated to be 26743.16 Da. The amino acid sequence alignment showed that the highest sequence identity was only 28% with that of the beta-1,3-1,4-glucanase from Bacillus subtilis. Moreover, the nucleotide sequence did not match any other known Bacillus beta-glucanase gene. The member of the gene cluster that includes this novel gene was apparently different from that of the gene cluster including the putative beta-glucanase genes (bh3231 and bh3232) from B. halodurans C-125. Therefore, the novel gene is not a copy of either of these genes, and in B. halodurans cells, the putative role of the encoded protein may differ from that of bh3231 and bh3232. To examine the activity of the gene product, the gene was cloned as a His-tagged protein and expressed in Escherichia coli. The purified enzyme showed activity against lichenan, barley beta-glucan, laminarin, and carboxymethyl curdlan. Thin-layer chromatography showed that the enzyme hydrolyzes substrates in an endo-type manner. When beta-glucan was used as a substrate, the pH optimum was between 6 and 8, and the temperature optimum was 60 degrees C. After 2 h incubation at 50 and 60 degrees C, the residual activity remained 100% and 50%, respectively. The enzymatic activity was abolished after 30 min incubation at 70 degrees C. Based on the results, the gene encodes an endo-type beta-1,3(4)-D-glucanase (E.C. 3.2.1.6).     

Bacillus licheniformis APase I gene promoter: a strong well-regulated promoter in B. subtilis

The 5' regulatory region and the portion of the structural gene coding for the amino-terminal sequence of alkaline phosphatase I (APase I) were isolated from Bacillus licheniformis MC14 using a synthetic oligodeoxynucleotide deduced from the amino acid sequence of the enzyme. The DNA sequence analysis of this region revealed an open reading frame of 129 amino acids containing the amino-terminal sequence of the mature APase protein. The protein sequence was preceded by a putative signal sequence of 32 amino acid residues. The predicted amino acid sequence of the partial APase clone as well as the experimentally determined amino acid sequence of the enzyme indicated that B. licheniformis APase retains the important features conserved among other APases of Bacillus subtilis, Escherichia coli, Saccharomyces cerevisiae, and various human tissues. Heterologous expression studies of the promoter using a fusion with the lacZ gene indicated that it functions as a very strong inducible promoter in B. subtilis that is tightly regulated by phosphate concentration.     

High-Yield Production of a Bacterial Xylanase in the Filamentous Fungus Trichoderma reesei Requires a Carrier Polypeptide with an Intact Domain Structure

A bacterial xylanase gene, Nonomuraea flexuosa xyn11A, was expressed in the filamentous fungus Trichoderma reesei from the strong cellobiohydrolase 1 promoter as fusions to a variety of carrier polypeptides. By using single-copy isogenic transformants, it was shown that production of this xylanase was clearly increased (up to 820 mg/liter) when it was produced as a fusion protein with a carrier polypeptide having an intact domain structure compared to the production (150 to 300 mg/liter) of fusions to the signal sequence alone or to carriers having incomplete domain structures. The carriers tested were the T. reesei mannanase I (Man5A, or MANI) core-hinge and a fragment thereof and the cellulose binding domain of T. reesei cellobiohydrolase II (Cel6A, or CBHII) with and without the hinge region(s) and a fragment thereof. The flexible hinge region was shown to have a positive effect on both the production of Xyn11A and the efficiency of cleavage of the fusion polypeptide. The recombinant Xyn11A produced had properties similar to those of the native xylanase. It constituted 6 to 10% of the total proteins secreted by the transformants. About three times more of the Man5A core-hinge carrier polypeptide than of the recombinant Xyn11A was observed. Even in the best Xyn11A producers, the levels of the fusion mRNAs were only ~10% of the level of cel7A (cbh1) mRNA in the untransformed host strain.     

Characterization of a Neocallimastix patriciarum cellulase cDNA (celA) homologous to Trichoderma reesei cellobiohydrolase II.

The nucleotide sequence of a cellulase cDNA (celA) from the rumen fungus Neocallimastix patriciarum and the primary structure of the protein which it encodes were characterized. The celA cDNA was 1.95 kb long and had an open reading frame of 1,284 bp, which encoded a polypeptide having 428 amino acid residues. A sequence alignment showed that cellulase A (CELA) exhibited substantial homology with family B cellulases (family 6 glycosyl hydrolases), particularly cellobiohydrolase II from the aerobic fungus Trichoderma reesei. In contrast to previously characterized N. patriciarum glycosyl hydrolases, CELA did not exhibit homology with any other rumen microbial cellulases described previously. Primary structure and function studies in which deletion analysis and a sequence comparison with other well-characterized cellulases were used revealed that CELA consisted of a cellulose-binding domain at the N terminus and a catalytic domain at the C terminus. These two domains were separated by an extremely Asn-rich linker. Deletion of the cellulose-binding domain resulted in a marked decrease in the cellulose-binding ability and activity toward crystalline cellulose. When CELA was expressed in Escherichia coli, it was located predominantly in the periplasmic space, indicating that the signal sequence of CELA was functional in E.coli. Enzymatic studies showed that CELA had an optimal pH of 5.0 and an optimal temperature of 40 degrees C. The specific activity of immunoaffinity-purified CELA against Avicel was 9.7 U/mg of protein, and CELA appeared to be a relatively active cellobiohydrolase compared with the specific activities reported for other cellobiohydrolases, such as T. reesei cellobiohydrolases I and II.     

The organization of the purL gene encoding 5'-phosphoribosylformylglycinamide amidotransferase of Escherichia coli

Escherichia coli 5'-phosphoribosylformylglycinamide (FGAR) amidotransferase (EC 6.3.5.3) encoded by the purL gene catalyzes the conversion of FGAR to formylglycinamidine in the presence of glutamine and ATP for the de novo purine nucleotide biosynthesis. On the basis of the nucleotide sequence of purL, the enzyme was dissected along the polypeptide chain into at least three discrete regions, designated as domains I, II, and III, by genetic complementation tests. Domain III (255 amino acids), which resides in the C-terminal region, is similar in amido acid sequence to several glutamine amidotransferases and exerts the transfer of the amide nitrogen of glutamine. Domain I (791 amino acids) resides in the N-terminal region and contains a potential ATP binding motif. Domain II (249 amino acids) locates between domains I and III and is composed of an alternating structure of at least eight predicted beta-strand and alpha-helix elements, as has been observed in the family of triosephosphate isomerases. The functions of domains I and II have been discussed in relation to the transfer of the carbonyl oxygen of FGAR into the gamma-phosphorus moiety of ATP. These results support a model that the E. coli purL gene is a fused gene of at least three different gene families. The highly repetitive sequences of the E. coli genome appeared to play an important role in the process of the gene fusion.     

A nascent peptide is required for ribosomal bypass of the coding gap in bacteriophage T4 gene 60

Bacteriophage T4 DNA topoisomerase gene 60 contains a 50 nucleotide untranslated region within the coding sequence of its mRNA. Translational bypass of this sequence by elongating ribosomes has been postulated for the mode of synthesis of an 18 kd polypeptide specified by the split coding segments. Ribosome bypass of the untranslated region also occurs when a segment of gene 60 is fused to lacZ and expressed in E. coli. The efficiency of bypass in these gene 60-lacZ fusions approaches 100%. Here, mutations that delete, insert, or substitute nucleotides from gene 60-lacZ fusions are examined. Essential features necessary for high level gap bypass emerging from this analysis are a cis-acting nascent peptide sequence, a short duplication bordering the gap, and a stop codon contained in a stem-loop structure at the 5' junction of the gap.