Production of Bioactive Human Beta-Defensin-4 in <Emphasis Type="Italic">Escherichia coli</Emphasis> Using SUMO Fusion Partner

The human beta defensins-4 (hBD4) exhibit a broad range of antimicrobial properties and are thought to be ideal therapeutic agents because of their potential ability to circumvent the problems of acquired resistance often observed with other antimicrobial therapies. We report here the application of small ubiquitin-related modifier (SUMO) fusion technology to the expression and purification of cationic antibacterial peptide hBD4. The fusion protein expressed in a soluble form was purified to a purity of 90% by Ni-IDA chromatography and 637 mg protein of interest was obtained per liter of fermentation culture. After the SUMO-hBD4 fusion protein was cleaved by the SUMO protease at 30 °C for 1 h, the cleaved sample was re-applied to a Ni-IDA. Finally, about 166 mg recombinant hBD4 was obtained from 1 L fermentation culture with no less than 96% purity and the recombinant hBD4 had similar antimicrobial properties to the synthetic hBD4. Thus, the SUMO-mediated peptide expression and purification system potentially could be employed for the production of recombinant cytotoxic peptides.     

The use of recombinant fusion proteases in the affinity purification of recombinant proteins

In the affinity purification of recombinant fusion proteins, the rate-limiting step is usually the efficient proteolytic cleavage and removal of the affinity tail and the protease from the purified recombinant protein. We have developed a rapid, convenient, and efficient method of affinity purification that can overcome this limitation. In one example of the method, the protease 3C from a picornavirus (3Cpro), which cleaves specific sequences containing a minimum of 6-7 amino acids, has been expressed as a fusion with glutathione S-transferase. The resultant recombinant "fusion protease" cleaves fusion proteins bearing (from the amino-terminus) the same affinity tail as the fusion protease, a 3Cpro cleavage recognition site, and the recombinant protein of interest. The recombinant protein is purified in a single chromatographic step, which removes both the affinity tail and the fusion protease. The advantages over existing methods include much improved specificity of proteolytic cleavage, complete removal of the protease and the affinity tail in one step, and the option of adding any desired amount of fusion protease to ensure efficient cleavage. The potential flexibility of the method is shown by the use of various affinity tails and alternative fusion proteases.     

A self-cleavable sortase fusion for one-step purification of free recombinant proteins

A new protein fusion system has been developed to generate free recombinant protein in a single affinity chromatographic step. The key component in the fusion is the catalytic core of sortase A from Staphylococcus aureus (SrtAc), which recognizes and cleaves the Thr-Gly bond at an LPXTG sequence with moderate activity. The fusion here consists of an N-terminal His6 tag, SrtAc, and an LPETG linker followed by protein of interest at the C-terminus. The fusion protein is expressed in Escherichia coli and purified by immobilized metal-ion affinity chromatography (IMAC). The immobilized fusion then undergoes on-column SrtAc-mediated cleavage at the LPETG site in the presence of Ca2+ and/or triglycine. The target protein with an extra N-terminal glycine is released from the fusion while the N-terminal portion remains bound to the column. Because the cleavage enzyme SrtAc is co-expressed as a fusion with the target protein, the purification system eliminates exogenous proteolysis. This purification approach is simple, robust, inexpensive, time saving, and allows purification of free recombinant protein via one-step chromatography.     

Protein Production in Yarrowia lipolytica Via Fusion to the Secreted Lipase Lip2p

We established a strategy for protein production and purification via expression in Yarrowia lipolytica as Lip2p fusion protein. To evaluate the expression system a cysteine-rich miniprotein, an antibody fragment and an enzyme showing galactose oxidase activity were chosen. These proteins have varying disulfide bond content, size, and structural complexity. Endogenous lipase Lip2p was used as a fusion partner to direct the fused proteins to the extracellular medium. A linker sequence was introduced at the junction of Lip2p and the respective fused protein that contains a hexahistidine tag followed by a TEV protease cleavage site. This allows for a specific and simple purification via IMAC for capturing the secreted proteins from the supernatant followed by a second IMAC for removing all contaminants after proteolytic release of the protein of interest. Up to 174 mg/L fusion protein was obtained using shake flask cultivation. Functionality of each of the purified proteins was confirmed by individual assays. Expression of proteins of interest via Lip2p fusion not only provides a convenient expression and purification scheme but also enables for an online monitoring of accumulation of secreted fusion proteins in the medium by exploiting the intrinsic lipase activity of the fusion.     

Purification of dual-tagged intact recombinant proteins

Large-scale purification of recombinant proteins has been used extensively to assist numerous protein studies, including investigation of function, substrate identification and protein-protein interaction of low abundance proteins. Genetic fusion of affinity tags to these proteins has also been widely used for ease of purification by affinity chromatography. However, this technique sometimes yields unstable and degraded protein products limiting its application. In this study, we show a facile and straightforward method of dual-tagged recombinant protein purification that eliminates contamination by degraded protein products. A 6His-containing BamHI-HindIII fragment from pQE12 was ligated into the pGEX-KG BamHI-HindIII fragment and the protein of interest (p25(nck5a), which is highly susceptible to proteolytic degradation when expressed and purified from bacteria) was cloned into the BamHI site without a termination codon. The resulting plasmid construct, designated as pGST-p25(nck5a)-6His, with GST at the N-terminal and 6His at the C-terminal was expressed in Escherichia coli DH5alpha and purified using a two-step procedure. We show that using Ni(2+)-NTA chromatography as a first purification step and GSH-agarose chromatography as a second step, rather than vice-versa, yields a highly purified intact protein that is free of any contaminating degraded protein product. The purified fusion protein is soluble and fully active.     

Overproduction, preparation of monoclonal antibodies and purification of E. coli asparagine synthetase A.

In order to explore the structure--function relationship of the Escherichia coli asparagine synthetase A it was necessary to devise a system for overexpression of the gene and purification of the gene product. The E. coli asparagine synthetase A structural gene was fused to the 3' end of the human carbonic anhydrase II structural gene and overexpressed in E. coli. The gene product, a 66 kDa fusion protein, which exhibited asparagine synthetase activity, was purified in a single step by affinity chromatography and used as the antigen for the production of monoclonal antibodies. The monoclonal antibodies were screened by ELISA. Colonies were chosen which were positive for purified fusion protein and negative for purified human carbonic anhydrase II. The E. coli asparagine synthetase A gene was then overexpressed and the gene product was used without purification for the final screen. The antibodies selected were used for immunoaffinity chromatography to purify the recombinant overexpressed E. coli asparagine synthetase A. Thus, a procedure is now available so that asparagine synthetase A can be purified to homogeneity in a single step.     

Single-column purification of free recombinant proteins using a self-cleavable affinity tag derived from a protein splicing element

A novel protein purification system has been developed which enables purification of free recombinant proteins in a single chromatographic step. The system utilizes a modified protein splicing element (intein) from Saccharomyces cerevisiae (Sce VMA intein) in conjunction with a chitin-binding domain (CBD) from Bacillus circulans as an affinity tag. The concept is based on the observation that the modified Sce VMA intein can be induced to undergo a self-cleavage reaction at its N-terminal peptide linkage by 1,4-dithiothreitol (DTT), β-mercaptoethanol (β-ME) or cysteine at low temperatures and over a broad pH range. A target protein is cloned in-frame with the N-terminus of the intein-CBD fusion, and the stable fusion protein is purified by adsorption onto a chitin column. The immobilized fusion protein is then induced to undergo self-cleavage under mild conditions, resulting in the release of the target protein while the intein-CBD fusion remains bound to the column. No exogenous proteolytic cleavage is needed. Furthermore, using this procedure, the purified free target protein can be specifically labeled at its C-terminus.     

Expression of recombinant actin 5C from Drosophila in the methylotrophic yeast Pichia pastoris

A system for actin expression in cells of yeast Pichia pastoris was constructed. Drosophila actin 5C, by 90% homologous to beta-actin of higher eukaryotes, was used as a target protein. To improve the procedures of target protein biosynthesis in yeast cells and of extraction and purification of recombinant actin the fusion protein GFP-actin 5C, having fluorescence protein GFP as a reporter part, was expressed and purified. The dimensions and resistance of yeast cells producing recombinant actin were characterized. It was shown that the size and form of cells depended on the accumulation of recombinant protein. The purified fusion protein was used for obtaining polyclonal antibody for testing recombinant actin.     

A new expression vector for high level protein production,one step purification and direct isotopic labeling of calmodulin-binding peptide fusion proteins

Calmodulin-binding peptide (CBP), a peptide of 26 amino acids derived from muscle myosin light chain kinase (MLCK), binds to calmodulin with nanomolar affinity. Proteins fused in frame with CBP can be purified from crude E. coli lysates in a single step using calmodulin affinity chromatography (Stofko-Hahn et al., 1992). Because the binding between CBP and calmodulin is calcium-dependent, the fusion protein can be eluted from the resin with virtually any buffer containing EGTA (2 mM) and used directly for many applications. To take full advantage of this affinity purification system, we constructed the versatile CBP fusion protein expression vector pCAL-n. The CBP coding sequence was positioned for fusion at the N-terminus, an advantage that ensures consistent high level synthesis of fusion proteins due to the efficient translation of the CBP in E. coli. The production of fusion proteins from pCAL-n is controlled by the tightly regulated T7lacO promoter. A versatile multiple cloning site (MCS) was included to facilitate the cloning of genes of interest. The protein coding sequence for the enzyme c-Jun N-terminal kinase (JNK) was inserted into the MCS of pCAL-n, and the resulting fusion protein CBP-JNK synthesized in E. coli cells at 15–20 mg/l culture. CBP-JNK was purified to near homogeneity in one step with calmodulin affinity resin. Purified CBP-JNK is fully active, and the CBP peptide tag can be removed by cleavage with thrombin. We also show that CBP can be efficiently phosphorylated by cAMP-dependent protein kinase. Hence, the purified fusion proteins can be labeled directly with [γ-³²P]ATP and used to probe protein–protein or protein–nucleic acid interactions.     

High-level expression and rapid purification of rare-codon genes from hyperthermophilic archaea by the GST gene fusion system

In this study, we compared two gene fusion expression strategies using two rare codon genes (Ssh10b and MtGrxM) from archaea as a model system. Both genes can be highly expressed as N- or C-terminal fusion partners to GST or the intein/chitin-binding tag. However, the fusion protein with intein tag could not be cleaved, even under stringent conditions, possibly due to steric hindrance, thus preventing further purification. In contrast, the GST fusion system could increase protein expression level and the corresponding fusion protein could be easily cleaved by thrombin. After binding to glutathione sepharose, the fusion protein was cleaved on column, and a roughly purified protein fraction was eluted. This fraction was purified by heating at 80 degrees C for 10 min, followed by centrifugation. The correct total mass and N-terminal primary structure were confirmed by mass spectrometry and Edman degradation. Both constructs were used for in vitro expression, and similar results were obtained, indicating higher expression levels of the GST tag vs. intein/chitin tag. Taken together, our results suggest that the GST fusion system can be used as a considerable alternative to synthetic genes for the expression of rare codon genes. The affinity chromatography purification followed by a heating step is an efficient and convenient method for thermostable protein purification.     

Lectin-based affinity tag for one-step protein purification

The production of pure protein is indispensable for many applications in life sciences, however protein purification protocols are difficult to establish, and the experimental procedures are usually tedious and time-consuming. Therefore, a number of tags were developed to which proteins of interest can be fused and subsequently purified by affinity chromatography. We report here on a novel lectin-based affinity tag using the D-mannose-specific lectin LecB from Pseudomonas aeruginosa. A fusion protein was constructed consisting of yellow fluorescent protein and LecB separated by an enterokinase cleavage site. This protein was overexpressed in Escherichia coli Tuner (DE3), and the cell extract was loaded onto a column containing a mannose agarose matrix. Electrophoretically pure fusion protein at a yield of 24 mg/L culture was eluted with a D-mannose containing buffer The determination of equilibrium adsorption isotherms revealed an association constant of the lectin to the mannose agarose matrix of Ka = 3.26 x 10(5)/M. Enterokinase treatment of the purified fusion protein resulted in the complete removal of the LecB-tag. In conclusion, our results indicate that the lectin LecB of P. aeruginosa can be used as a tag for the high-yield one-step purification of recombinant proteins.     

Purification of human interleukin-2 fusion protein produced in insect larvae is facilitated by fusion with green fluorescent protein and metal affinity ligand

The fusion protein of green fluorescent protein (GFP) and human interleukin-2 (hIL-2) was produced in insect Trichoplusia ni larvae infected with recombinant baculovirus derived from the Autographa californica nuclear polyhedrosis virus (AcNPV). This fusion protein was composed of a metal ion binding site (His)6 for rapid one-step purification using immobilized metal affinity chromatography (IMAC), UV-optimized GFP (GFPuv), enterokinase cleavage site for recovering hIL-2 from purified fusion protein, and hIL-2 protein. The additional histidine residues on fusion protein enabled the efficient purification of fusion protein based on immobilized metal affinity chromatography. In addition to advantages of GFP as a fusion marker, GFP was able to be used as a selectable purification marker; we easily determined the correct purified fusion protein sample fraction by simply detecting GFP fluorescence.     

Biodiversity in aerobic granule membrane bioreactor at high organic loading rates

Antibacterial peptide CM4 (ABP-CM4) is a small cationic peptide with broad-spectrum activities against bacteria, fungi, and tumor cells, which may possibly be used as an antimicrobial agent. We report here the application of small ubiquitin-related modifier (SUMO) fusion technology to the expression and purification of cationic antibacterial peptide ABP-CM4. The fusion protein expressed in a soluble form was purified to a purity of 90% by Ni-IDA chromatography and 112 mg protein of interest was obtained per liter of fermentation culture. After the SUMO–CM4 fusion protein was cleaved by the SUMO protease at 30 °C for 1 h, the cleaved sample was re-applied to a Ni-IDA. Finally, about 24 mg recombinant CM4 was obtained from 1 l fermentation culture with no less than 96% purity and the recombinant CM4 had similar antimicrobial properties to the synthetic CM4. Thus, the SUMO-mediated peptide expression and purification system potentially could be employed for the production of recombinant cytotoxic peptides.     

Efficient high level expression of peptides and proteins as fusion proteins with the N-terminal domain of L9: application to the villin headpiece helical subdomain

The efficient expression of small to midsize polypeptides and small marginally stable proteins can be difficult. A new protein fusion system is developed to allow the expression of peptides and small proteins. The polypeptide of interest is linked via a Factor Xa cleavage sequence to the C-terminus of the N-terminal domain of the ribosomal protein L9 (NTL9). NTL9 is a small (56 residue) basic protein. The C-terminus of the protein is part of an alpha-helix which extends away from the globular structure thus additional domains can be fused without altering the fold of NTL9. NTL9 expresses at high levels, is extremely soluble, and remains fully folded over a wide temperature and pH range. The protein has a high net positive charge, facilitating purification of fusion proteins by ion exchange chromatography. NTL9 fusions can also be easily purified by reverse phase HPLC. As a test case we demonstrate the high level expression of a small, 36 residue, three helix bundle, the villin headpiece subdomain. This protein is widely used as a model system for folding studies and the development of a simple expression system should facilitate experimental studies of the subdomain. The yield of purified fusion protein is 70 mg/L of culture and the yield of purified villin headpiece subdomain is 24 mg/L of culture. We also demonstrate the use of the fusion system to express a smaller marginally folded peptide fragment of the villin headpiece domain.     

TSGIT: An N‐ and C‐terminal tandem tag system for purification of native and intein‐mediated ligation‐ready proteins

A large variety of fusion tags have been developed to improve protein expression, solubilization, and purification. Nevertheless, these tags have been combined in a rather limited number of composite tags and usually these composite tags have been dictated by traditional commercially‐available expression vectors. Moreover, most commercially‐available expression vectors include either N‐ or C‐terminal fusion tags but not both. Here, we introduce TSGIT, a fusion‐tag system composed of both N‐ and a C‐terminal composite fusion tags. The system includes two affinity tags, two solubilization tags and two cleavable tags distributed at both termini of the protein of interest. Therefore, the N‐ and the C‐terminal composite fusion tags in TSGIT are fully orthogonal in terms of both affinity selection and cleavage. For using TSGIT, we streamlined the cloning, expression, and purification procedures. Each component tag is selected to maximize its benefits toward the final construct. By expressing and partially purifying the protein of interest between the components of the TSGIT fusion, the full‐length protein is selected over truncated forms, which has been a long‐standing problem in protein purification. Moreover, due to the nature of the cleavable tags in TSGIT, the protein of interest is obtained in its native form without any additional undesired N‐ or C‐terminal amino acids. Finally, the resulting purified protein is ready for efficient ligation with other proteins or peptides for downstream applications. We demonstrate the use of this system by purifying a large amount of native fluorescent mRuby3 protein and bacteriophage T7 gp2.5 ssDNA‐binding protein.     

Effects of guanidine hydrochloride on the conformation and enzyme activity of streptomycin adenylyltransferase monitored by circular dichroism and fluorescence spectroscopy

Equilibrium denaturation of streptomycin adenylyltransferase (SMATase) has been studied by CD spectroscopy, fluorescence emission spectroscopy, and binding of the hydrophobic dye 1-anilino-8-naphthalene sulfonic acid (ANS). Far-UV CD spectra show retention of 90% native-like secondary structure at 0.5 M guanidine hydrochloride (GdnHCl). The mean residue ellipticities at 222 nm and enzyme activity plotted against GdnHCl concentration showed loss of about 50 and 75% of secondary structure and 35 and 60% of activity at 0.75 and 1.5 M GdnHCl, respectively. At 6 M GdnHCl, there was loss of secondary structure and activity leading to the formation of GdnHCl-induced unfolded state as evidenced by CD and fluorescence spectroscopy as well as by measuring enzymatic activity. The denaturant-mediated decrease in fluorescence intensity and 5 nm red shift of λ_max point to gradual unfolding of SMATase when GdnHCl is added up from 0.5 M to a maximum of 6 M. Decreasing of ANS binding and red shift (∼5 nm) were observed in this state compared to the native folded state, indicating the partial destruction of surface hydrophobic patches of the protein molecule on denaturation. Disruption of disulfide bonds in the protein resulted in sharp decrease in surface hydrophobicity of the protein, indicating that the surface hydrophobic patches are held by disulfide bonds even in the GdnHCl denatured state. Acrylamide and potassium iodide quenching of the intrinsic tryptophan fluorescence of SMATase showed that the native protein is in folded conformation with majority of the tryptophan residues exposed to the solvent, and about 20% of them are in negatively charged environment. Published in Russian in Biokhimiya, 2006, Vol. 71, No. 11, pp. 1514–1523.     

Optimisation of Recombinant Production of Active Human Cardiac SERCA2a ATPase

Methods for recombinant production of eukaryotic membrane proteins, yielding sufficient quantity and quality of protein for structural biology, remain a challenge. We describe here, expression and purification optimisation of the human SERCA2a cardiac isoform of Ca²⁺ translocating ATPase, using Saccharomyces cerevisiae as the heterologous expression system of choice. Two different expression vectors were utilised, allowing expression of C-terminal fusion proteins with a biotinylation domain or a GFP- His₈ tag. Solubilised membrane fractions containing the protein of interest were purified onto Streptavidin-Sepharose, Ni-NTA or Talon resin, depending on the fusion tag present. Biotinylated protein was detected using specific antibody directed against SERCA2 and, advantageously, GFP-His₈ fusion protein was easily traced during the purification steps using in-gel fluorescence. Importantly, talon resin affinity purification proved more specific than Ni-NTA resin for the GFP-His₈ tagged protein, providing better separation of oligomers present, during size exclusion chromatography. The optimised method for expression and purification of human cardiac SERCA2a reported herein, yields purified protein (> 90%) that displays a calcium-dependent thapsigargin-sensitive activity and is suitable for further biophysical, structural and physiological studies. This work provides support for the use of Saccharomyces cerevisiae as a suitable expression system for recombinant production of multi-domain eukaryotic membrane proteins.     

Construction of intein-mediated hGMCSF expression vector and its purification in Pichia pastoris

As a novel attempt for the intracellular recombinant protein over expression and easy purification from Pichia pastoris, the therapeutic cytokine human granulocyte macrophage colony stimulating factor (hGMCSF) gene was fused to an intein-chitin-binding domain (gene from pTYB11 vector) fusion tag by overlap extension PCR and inserted into pPICZB vector, allowing for the purification of a native recombinant protein without the need for enzymatic cleavage. The fusion protein under the AOX1 promoter was integrated into the P. pastoris genome (SMD 1168) and the recombinant Pichia clones were screened for multicopy integrants. Expression of hGMCSF was done using glycerol and methanol based synthetic medium by three stage cultivation in a bioreactor. Purification of the expressed hGMCSF fusion protein was done after cell disruption and binding of the solubilized fusion protein to chitin affinity column, followed by DTT induced on column cleavage of hGMCSF from the intein tag. In this study, final biomass of 89 g dry cell weight/l and purified hGMCSF of 120 mg/l having a specific activity of 0.657 x 10(7) IU/mg was obtained. This strategy has an edge over the other--His or--GST based fusion protein purification where non-specific protein binding, expensive enzymatic cleavage and further purification of the enzyme is required. It distinguishes itself from all other purification systems by its ability to purify, in a single chromatographic step.     

Intein-mediated rapid purification of Cre recombinase

Cre recombinase produced by bacteriophage P1 catalyzes site-specific recombination of DNA between loxP recognition sites in both prokaryotic and eukaryotic cells and has been widely used for genome engineering and in vitro cloning. Recombinant Cre has been overproduced in Escherichia coli and its purification involves multiple steps. In this report, we used an "intein" fusion system to express Cre as a C-terminal fusion to a modified protein splicing element, i.e., intein. The modified intein contained a Bacillus circulans chitin-binding domain which allowed binding of the fusion protein on a chitin column and could be induced to undergo in vitro peptide bond cleavage which specifically released Cre from the column. Using the intein system, we have obtained highly pure nontagged Cre after just a single chromatographic step, which corresponded to approximately 80% recovery and 27-fold purification. The activity of the purified Cre was determined in an in vitro assay system and was found to remain stable over a period of more than 6 months.