Influence of protein flexibility on the redox potential of rubredoxin: Energy minimization studies

A theoretical investigation of the protein contribution to the redox potential of the iron–sulfur protein rubredoxin is presented. Structures of the oxidized and reduced forms of the protein were obtained by energy minimizing the oxidized crystal structure of Clostridium pasteurianum rubredoxin with appropriate charges and parameters. By including 102 crystal waters, structures close to the original crystal structure were obtained (rms difference of 1.16 Å), even with extensive minimization, thus allowing accurate calculations of comparative energies. Our calculations indicate an energy change of about –60 kcal/mol (2.58 eV) in the protein alone upon reduction. This energy change was due to both the change in charge of the redox site and the subsequent relaxation of the protein. An energy minimization procedure for the relaxation gives rms differences between the oxidized and reduced states of about 0.2 Å. The changes were small and occurred in both the backbone and sidechain mainly near the Fe–S center but contributed about – 16 kcal/mol (0.69 eV) to the total protein contribution. Although the neglect of certain effects such as electronic polarization may make the relaxation energies calculated an upper limit, the results indicate that protein relaxation contributes substantially to the redox potential. © 1993 Wiley-Liss, Inc.     

X-ray crystal structures of the oxidized and reduced forms of the rubredoxin from the marine hyperthermophilic archaebacterium Pyrococcus furiosus.

The structures of the oxidized and reduced forms of the rubredoxin from the archaebacterium, Pyrococcus furiosus, an organism that grows optimally at 100 degrees C, have been determined by X-ray crystallography to a resolution of 1.8 A. Crystals of this rubredoxin grow in space group P2(1)2(1)2(1) with room temperature cell dimensions a = 34.6 A, b = 35.5 A, and c = 44.4 A. Initial phases were determined by the method of molecular replacement using the oxidized form of the rubredoxin from the mesophilic eubacterium, Clostridium pasteurianum, as a starting model. The oxidized and reduced models of P. furiosus rubredoxin each contain 414 nonhydrogen protein atoms comprising 53 residues. The model of the oxidized form contains 61 solvent H2O oxygen atoms and has been refined with X-PLOR and TNT to a final R = 0.178 with root mean square (rms) deviations from ideality in bond distances and bond angles of 0.014 A and 2.06 degrees, respectively. The model of the reduced form contains 37 solvent H2O oxygen atoms and has been refined to R = 0.193 with rms deviations from ideality in bond lengths of 0.012 A and in bond angles of 1.95 degrees. The overall structure of P. furiosus rubredoxin is similar to the structures of mesophilic rubredoxins, with the exception of a more extensive hydrogen-bonding network in the beta-sheet region and multiple electrostatic interactions (salt bridge, hydrogen bonds) of the Glu 14 side chain with groups on three other residues (the amino-terminal nitrogen of Ala 1; the indole nitrogen of Trp 3; and the amide nitrogen group of Phe 29). The influence of these and other features upon the thermostability of the P. furiosus protein is discussed.     

The Controlling Action of Actithiazic Acid on the Biosynthesis of Biotin-vitamers by Various Microorganisms

By the addition of actithiazic acid, or acidomycin (ACM), to culture media, the accumulation of desthiobiotin by various microorganisms was enhanced from two-fold to about seventyfold, while that of biotin was markedly reduced. Especially, Bacillus sphaericus accumulated 350 μg per ml of biotin-vitamers assayed with Saccharomyces cerevisiae. ACM was not incorporated into the desthiobiotin molecule by resting cells of B. sphaericus. The amount of biotin-vitamers assayed with S. cerevisiae which was synthesized from pimelic acid by the resting cells grown with ACM was twice as great as that synthesized by the cells grown without ACM. From these results, the mechanism of the controlling action of ACM on biotin biosynthesis was discussed.     

Blue copper proteins: a comparative analysis of their molecular interaction properties

Blue copper proteins are type-I copper-containing redox proteins whose role is to shuttle electrons from an electron donor to an electron acceptor in bacteria and plants. A large amount of experimental data is available on blue copper proteins; however, their functional characterization is hindered by the complexity of redox processes in biological systems. We describe here the application of a semiquantitative method based on a comparative analysis of molecular interaction fields to gain insights into the recognition properties of blue copper proteins. Molecular electrostatic and hydrophobic potentials were computed and compared for a set of 33 experimentally-determined structures of proteins from seven blue copper subfamilies, and the results were quantified by means of similarity indices. The analysis provides a classification of the blue copper proteins and shows that (I) comparison of the molecular electrostatic potentials provides useful information complementary to that highlighted by sequence analysis; (2) similarities in recognition properties can be detected for proteins belonging to different subfamilies, such as amicyanins and pseudoazurins, that may be isofunctional proteins; (3) dissimilarities in interaction properties, consistent with experimentally different binding specificities, may be observed between proteins belonging to the same subfamily, such as cyanobacterial and eukaryotic plastocyanins; (4) proteins with low sequence identity, such as azurins and pseudoazurins, can have sufficient similarity to bind to similar electron donors and acceptors while having different binding specificity profiles.     

黄素氧还蛋白参与的固氮链电子传递

棕色固氮菌中电子载体Fld直接向固氮酶铁蛋白传递电子。Fld_(ox)至Fld_R是双电子二步还原反应,极谱半波电位分别为-210、-550 mV。Fld_(ox)至Fld_(SR)的中点电位为-280 mV,Fld_(SR)至Fld_R为-500mV。铁蛋白中点电位为-256mV,加MgATP后为-390 mV。Fld_R与铁蛋白ox组成的电池电动势为244mV,电子传递可自发进行,反应的J△G~o为-23KJ/摩尔,铁蛋白被Fld_R还原的K_a=1.3×120~4,加入MgATP后△G~o为-10.6KJ/摩尔,K_a=72。因此,未加入MgATP时电子传递反应更易进行。     

Structure of cyanobacterial Photosystem I

Photosystem I is one of the most fascinating membrane protein complexes for which a structure has been determined. It functions as a bio-solar energy converter, catalyzing one of the first steps of oxygenic photosynthesis. It captures the light of the sun by means of a large antenna system, consisting of chlorophylls and carotenoids, and transfers the energy to the center of the complex, driving the transmembrane electron transfer from plastoquinone to ferredoxin. Cyanobacterial Photosystem I is a trimer consisting of 36 proteins to which 381 cofactors are non-covalently attached. This review discusses the complex function of Photosystem I based on the structure of the complex at 2.5 Å resolution as well as spectroscopic and biochemical data.     

NMR of Redox Proteins of Plants, Yeasts and Photosynthetic Bacteria

NMR spectroscopy has evolved dramatically over the past 15 years, establishing a new, reliable methodology for studying biomacromolecules at atomic resolution. The three-dimensional structure and dynamics of a biomolecule or a biomolecular complex is only one of the main types of information available using NMR. The spectral assignment to the specific nuclei of a biostructure is a very precise reflection of their electronic environment. Any change in this environment due to a structural change, the binding of a ligand or the redox state of a redox cofactor, will be very sensitively reported by changes in the different NMR parameters. The capabilities of the NMR method are currently expanding dramatically and it is turning into a powerful means to study biosystems dynamically in exchange between different conformations, exchanging ligands, transient complexes, or the activation/inhibition of regulated enzymes. We review here several NMR studies that have appeared during the past 5 or 6 years in the field of redox proteins of plants, yeasts and photosynthetic bacteria. These new results illustrate the recent biomolecular NMR evolution and provide new physiological models for understanding the different types of electron transfer, including glutaredoxins, thioredoxins and their dependent enzymes, the ferredoxin-NADP oxidoreductase complex, flavodoxins, the plastocyanin-cytochrome f complex, and cytochromes c.     

The structure and function of omega loop A replacements in cytochrome c.

The structural and functional consequences of replacing omega-loop A (residues 18-32) in yeast iso-1-cytochrome c with the corresponding loop of Rhodospirillum rubrum cytochrome c2 have been examined. The three-dimensional structure of this loop replacement mutant RepA2 cytochrome c, and a second mutant RepA2(Val 20) cytochrome c in which residue 20 was back substituted to valine, were determined using X-ray diffraction techniques. A change in the molecular packing is evident in the RepA2 mutant protein, which has a phenylalanine at position 20, a residue considerably larger than the valine found in wild-type yeast iso-1-cytochrome c. The side chain of Phe 20 is redirected toward the molecular surface, altering the packing of this region of omega-loop A with the hydrophobic core of the protein. In the RepA2(Val 20) structure, omega-loop A contains a valine at position 20, which restores the original wild-type packing arrangement of the hydrophobic core. Also, as a result of omega-loop A replacement, residue 26 is changed from a histidine to asparagine, which results in displacements of the main-chain atoms near residue 44 to which residue 26 is hydrogen bonded. In vivo studies of the growth rate of the mutant strains on nonfermentable media indicate that the RepA2(Val 20) cytochrome c behaves much like the wild-type yeast iso-1 protein, whereas the stability and function of the RepA2 cytochrome c showed a temperature dependence. The midpoint reduction potential measured by cyclic voltammetry of the RepA2 mutant is 271 mV at 25 degrees C. This is 19 mV less than the wild-type and RepA2(Val 20) proteins (290 mV) and may result from disruption of the hydrophobic packing in the heme pocket and increased mobility of omega-loop A in RepA2 cytochrome c. The temperature dependence of the reduction potential is also greatly enhanced in the RepA2 protein.     

Pyranopterin Coordination Controls Molybdenum Electrochemistry in Escherichia coli Nitrate Reductase

We test the hypothesis that pyranopterin (PPT) coordination plays a critical role in defining molybdenum active site redox chemistry and reactivity in the mononuclear molybdoenzymes. The molybdenum atom of Escherichia coli nitrate reductase A (NarGHI) is coordinated by two PPT-dithiolene chelates that are defined as proximal and distal based on their proximity to a [4Fe-4S] cluster known as FS0. We examined variants of two sets of residues involved in PPT coordination: (i) those interacting directly or indirectly with the pyran oxygen of the bicyclic distal PPT (NarG-Ser⁷¹⁹, NarG-His¹¹⁶³, and NarG-His¹¹⁸⁴); and (ii) those involved in bridging the two PPTs and stabilizing the oxidation state of the proximal PPT (NarG-His¹⁰⁹² and NarG-His¹⁰⁹⁸). A S719A variant has essentially no effect on the overall Mo(VI/IV) reduction potential, whereas the H1163A and H1184A variants elicit large effects (ΔE_m values of −88 and −36 mV, respectively). Ala variants of His¹⁰⁹² and His¹⁰⁹⁸ also elicit large ΔE_m values of −143 and −101 mV, respectively. An Arg variant of His¹⁰⁹² elicits a small ΔE_m of +18 mV on the Mo(VI/IV) reduction potential. There is a linear correlation between the molybdenum E_m value and both enzyme activity and the ability to support anaerobic respiratory growth on nitrate. These data support a non-innocent role for the PPT moieties in controlling active site metal redox chemistry and catalysis.