Structural characterization of pyoverdines produced by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440 and <Emphasis Type="Italic">Pseudomonas taiwanensis</Emphasis> VLB120

The previously unknown sequences of several pyoverdines (PVD) produced by a biotechnologically-relevant bacterium, namely, Pseudomonas taiwanensis VLB120, were characterized by high performance liquid chromatography (HPLC)–high resolution mass spectrometry (HRMS). The same structural characterization scheme was checked before by analysis of Pseudomonas sp. putida KT2440 samples with known PVDs. A new sample preparation strategy based on solid-phase extraction was developed, requiring significantly reduced sample material as compared to existing methods. Chromatographic separation was performed using hydrophilic interaction liquid chromatography with gradient elution. Interestingly, no signals for apoPVDs were detected in these analyses, only the corresponding aluminum(III) and iron(III) complexes were seen. The chromatographic separation readily enabled separation of PVD complexes according to their individual structures. HPLC-HRMS and complementary fragmentation data from collision-induced dissociation and electron capture dissociation enabled the structural characterization of the investigated pyoverdines. In Pseudomonas sp. putida KT2240 samples, the known pyoverdines G4R and G4R A were readily confirmed. No PVDs have been previously described for Pseudomonas sp. taiwanensis VLB120. In our study, we identified three new PVDs, which only differed in their acyl side chains (succinic acid, succinic amide and malic acid). Peptide sequencing by MS/MS provided the sequence Orn-Asp-OHAsn-Thr-AcOHOrn-Ser-cOHOrn. Of particular interest is the presence of OHAsn, which has not been reported as PVD constituent before.     

Utilization of <Emphasis Type="Italic">fadA</Emphasis> knockout mutant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> for overproduction of medium chain-length-polyhydroxyalkanoate

The fadBA operon in the fatty acid β-oxidation pathway of P. putida KCTC1639 was blocked to induce a metabolic flux of the intermediates to the biosynthesis of medium chain-length PHA (mcl-PHA). Succinate at 150 mg l⁻¹ stimulated cell growth and also the biosynthesis of medium chain-length-polyhydroxyalkanoate. pH-stat fed-batch cultivation of the fadA knockout mutant P. putida KCTC1639 was carried out for 60 h, in which mcl-PHA reached 8 g l⁻¹ with a cell dry weight of 10.3 g l⁻¹.     

Vanillin production using <Emphasis Type="Italic">Escherichia coli</Emphasis> cells over-expressing isoeugenol monooxygenase of <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

The isoeugenol monooxygenase gene of Pseudomonas putida IE27 was inserted into an expression vector, pET21a, under the control of the T7 promoter. The recombinant plasmid was introduced into Escherichia coli BL21(DE3) cells, containing no vanillin-degrading activity. The transformed E. coli BL21(DE3) cells produced 28.3 g vanillin/l from 230 mM isoeugenol, with a molar conversion yield of 81% at 20°C after 6 h. In the reaction system, no accumulation of undesired by-products, such as vanillic acid or acetaldehyde, was observed.     

Characterization of a novel thermo-stable lipase from endophyte <Emphasis Type="Italic">Pseudomonas putida</Emphasis> in <Emphasis Type="Italic">Pistacia chinensis</Emphasis> Bunge

A novel lipolytic enzyme-producing endophytic strain PC2 was successfully isolated from the seeds of an ideal bioenergy plant Pistacia chinensis Bunge. Based on the analysis of morphology and 16S rRNA sequence, bacterial strain PC2 was identified as a subspecies of Pseudomonas putida, therefore named as P. putida PC2. Whole-genome sequencing showed PC2 contained a 1224-nucleotide lipase gene (named lip-PC2) predicted to encode a 407-amino-acid protein. Purified lipases from both the original PC2 strain and heterologously expressed Escherichia coli were nearly 50 kD with specific activity of 9.48 U/mL. LIP-PC2 displayed the maximal activity at 50°C or pH 8.0, and maintained above 80% relative activity in the range of from 40 to 60°C or pH in the range of from 6.0 to 8.0, indicating thermostable and alkaline properties. Enzyme activity was enhanced by Mg²⁺, Na⁺ and Mn²⁺, but strongly inhibited by Cu²⁺, Zn²⁺ Co²⁺, EDTA as well as organic solvents and surfactants. Additionally, the analysis of amino acid sequence and structure indicated that LIP-PC2 was a novel member belonging to family I.3 of bacterial lipolytic enzymes and its catalytic triad was consisted of Ser-200, Asp-342 and His-374.     

Industrial biotechnology of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> and related species

Since their discovery many decades ago, Pseudomonas putida and related subspecies have been intensively studied with regard to their potential application in industrial biotechnology. Today, these Gram-negative soil bacteria, traditionally known as well-performing xenobiotic degraders, are becoming efficient cell factories for various products of industrial relevance including a full range of unnatural chemicals. This development is strongly driven by systems biotechnology, integrating systems metabolic engineering approaches with novel concepts from bioprocess engineering, including novel reactor designs and renewable feedstocks.     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

Kinetics of BTEX biodegradation by a coculture of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> and<Emphasis Type="Italic"> Pseudomonas fluorescens</Emphasis> under hypoxic conditions

Pseudomonas putida and Pseudomonas fluorescens present as a coculture were studied for their abilities to degrade benzene, toluene, ethylbenzene, and xylenes (collectively known as BTEX) under various growth conditions. The coculture effectively degraded various concentrations of BTEX as sole carbon sources. However, all BTEX compounds showed substrate inhibition to the bacteria, in terms of specific growth, degradation rate, and cell net yield. Cell growth was completely inhibited at 500mgl^–1 of benzene, 600mgl^–1 of o-xylene, and 1000mgl^–1 of toluene. Without aeration, aerobic biodegradation of BTEX required additional oxygen provided as hydrogen peroxide in the medium. Under hypoxic conditions, however, nitrate could be used as an alternative electron acceptor for BTEX biodegradation when oxygen was limited and denitrification took place in the culture. The carbon mass balance study confirmed that benzene and toluene were completely mineralized to CO₂ and H₂O without producing any identifiable intermediate metabolites.     

Optimization of the solvent-tolerant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> S12 as host for the production of <Emphasis Type="Italic">p</Emphasis>-coumarate from glucose

A Pseudomonas putida S12 strain was constructed that is able to convert glucose to p-coumarate via the central metabolite l-tyrosine. Efficient production was hampered by product degradation, limited cellular l-tyrosine availability, and formation of the by-product cinnamate via l-phenylalanine. The production host was optimized by inactivation of fcs, the gene encoding the first enzyme in the p-coumarate degradation pathway in P. putida, followed by construction of a phenylalanine-auxotrophic mutant. These steps resulted in a P. putida S12 strain that showed dramatically enhanced production characteristics with controlled l-phenylalanine feeding. During fed-batch cultivation, 10 mM (1.7 g l⁻¹) of p-coumarate was produced from glucose with a yield of 3.8 Cmol% and a molar ratio of p-coumarate to cinnamate of 85:1.     

Revision of the <Emphasis Type="Italic">Serrulati</Emphasis> species of <Emphasis Type="Italic">Penstemon</Emphasis> section <Emphasis Type="Italic">Saccanthera</Emphasis> subsection <Emphasis Type="Italic">Serrulati</Emphasis>

A revision of Penstemon sect. Saccanthera subsect. Serrulati includes a new species (P. salmonensis), a new variety (P. triphyllus var. infernalis), and the elevation of a subspecies to species (P. curtiflorus), bringing the total number of species to eight, which are keyed and described, complete with nomenclature and type citations.     

Production of medium-chain-length hydroxyalkanoic acids from <Emphasis Type="Italic">Pseudomonas putida</Emphasis> in pH stat

The production of β-glucuronidase (GUS) driven by the Arabidopsis small heat shock protein 18.2 promoter in liquid cultures of transgenic tobacco (Nicotiana tabacum) hairy roots is reported. Clone GD-3, showing high GUS heat induction and a moderate growth rate, was selected from 436 clones for study. Treatment of GD-3 with heat shock at 36–42°C for 2 h then recovery at 27°C resulted in an increase in GUS specific activity, while higher heat-shock temperatures led to a decline. These results were in accordance with the change in esterase activity, a measure of tissue viability. Using 2 h of 42°C heat shock and a recovery phase at 27°C, GUS specific activity increased rapidly and reached a maximum of 267.6 nmol 4-methylumbelliferyl β-D-glucuronic acid (MU) min⁻¹ mg⁻¹ protein at 24 h of recovery. When tissues were continuously heated at 42°C and tested without a recovery period, GUS mRNA was detectable at 2 h and peaked at 5 h, but GUS activity was not seen until 10 h and did not peak until 28 h; in addition, the maximum activity was lower than that seen after heat shock for only 30 min or 2 h, followed by recovery. This shows that recovery at normal temperature is crucial for the heat-inducible heterogeneous expression system of transgenic hairy roots. Multiple heat-shock treatments showed that this system was heat reinducible, although a gradual decline in GUS specific activity was seen in the second and third cycles.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

Assessing biodegradation of furfuryl alcohol using <Emphasis Type="Italic">Pseudomonas putida</Emphasis> MTCC 1194 and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> MTCC 1034 and its kinetics

The biodegradation of furfuryl alcohol (FA) in shake flask experiments using a pure culture of Pseudomonas putida (MTCC 1194) and Pseudomonas aeruginosa (MTCC 1034) was studied at 30 °C and pH 7.0. Experiments were performed at different FA concentrations ranging from 50 to 500 mg/l. Before carrying out the biodegradation studies, the bacterial strains were acclimatized to the concentration of 500 mg/l of FA by gradually raising 100 mg/l of FA in each step. The well acclimatized culture of P. putida and P. aeruginosa degraded about 80 and 66% of 50 mg/l FA, respectively. At higher concentration of FA, the percentage of FA degradation decreased. The purpose of this study was to determine the kinetics of biodegradation of FA by measuring biomass growth rates and concentration of FA as a function of time. Substrate inhibition was calculated from experimental growth parameters using the Haldane equation. Data for P. putida were determined as µ _max ?=?0.23 h^?1, K _s ?=?23.93 mg/l and K _i ?=?217.1 mg/l and for P. aeruginosa were determined as µ _max ?=?0.13 h^?1, K _s ?=?21.3 mg/l and K _i ?=?284.9 mg/l. The experimental data were fitted in Haldane, Aiba and Edwards inhibition models.     

Gene <Emphasis Type="Italic">RAD31</Emphasis> is identical to gene <Emphasis Type="Italic">MEC1</Emphasis> of yeast <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The earlier identified gene RAD31 was mapped on the right arm of chromosome II in the region of gene MEC1 localization. Epistatic analysis demonstrated that the rad31 mutation is an allele of the MEC1 gene, which allows further designation of the rad31 mutation as mec1-212. Mutation mec1-212, similar to deletion alleles of this gene, causes sensitivity to hydroxyurea, disturbs the check-point function, and suppresses UV-induced mutagenesis. However, this mutation significantly increases the frequency of spontaneous canavanine-resistance mutations induced by disturbances in correcting errors of DNA replication and repair, which distinguishes it from all identified alleles of gene MEC1.     

<Emphasis Type="Italic">Galleria</Emphasis><Emphasis Type="Italic">mellonella</Emphasis> are Resistant to <Emphasis Type="Italic">Pneumocystis</Emphasis><Emphasis Type="Italic">murina</Emphasis> Infection

Studying Pneumocystis has proven to be a challenge from the perspective of propagating a significant amount of the pathogen in a facile manner. The study of several fungal pathogens has been aided by the use of invertebrate model hosts. Our efforts to infect the invertebrate larvae Galleria mellonella with Pneumocystis proved futile since P. murina neither caused disease nor was able to proliferate within G. mellonella. It did, however, show that the pathogen could be rapidly cleared from the host.     

Quantitative analysis and functional evaluation of zinc ion in the <Emphasis Type="SmallCaps">d</Emphasis>-hydantoinase from <Emphasis Type="Italic">Pseudomonas putida</Emphasis> YZ-26

d-Hydantoinase (HDT) is a metal-dependent enzyme that is widely used in industrial bioconversion to d-amino acids as valuable intermediates in the fields of food, pharmaceutical industry and agriculture. In this report, we prepared apo-HDT (metal-removed HDT) and Zn²⁺-HDT (Zn²⁺-added HDT) in vitro from a recombinant HDT (re-HDT) expressed in E. coli. The Zn²⁺-HDT and re-HDT contain 2.17 and 0.95 mol Zn²⁺ per mol subunit, respectively, and they have comparable enzymatic activities. In contrast, the apo-HDT only retains 0.04 mol Zn²⁺ per mol subunit with less than 10% activity, compared with the re-HDT. When the apo-HDT was reconstituted with ZnCl₂, the enzymatic activity recovery was about 75%. Moreover, the fluorescence intensity, circular dichroism spectra and thermo-stability of the apo-HDT and Zn²⁺-HDT are quite different from those of the re-HDT. These data suggest that the re-HDT may have two Zn²⁺-binding sites, one is an intrinsic or tight-binding site (zinc-α) essential for its activity and the other is a vacant or loose-binding site (zinc-β) possibly non-essential for the activity.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Decolorization of anaerobically digested molasses spent wash by <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

The distillery wastewater (spent wash) contains dark brown colored recalcitrant organic compounds that are not amenable to conventional biological treatment. The characteristic recalcitrance to decolorization is due to the presence of brown melanoidin polymers. In the present study, feasibility of using Pseudomonas putida putida strain U for decolorization of spent wash was demonstrated. Batch cultures of P. putida decolourized spent wash by 24%, twofold higher decolorization was achieved following immobilization in calcium alginate beads. Glucose concentration was critical for decolourization, and improved color removal efficiency was obtained by periodic replenishment of glucose. Decolourization was also observed with lactose or whey as alternative carbon sources. The results of our study suggest that P.putida could be used for biological decolorization of molasses spent washes and that supplementation with whey (a by-product from cheese industry) can offer economical viability to the process. Published in Russian in Prikladnaya Biokhimiya i Mikrobiologiya, 2009, Vol. 45, No. 1, pp. 78–83. The text was submitted by the authors in English.     

Dynamics of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> biofilms in an upscale experimental framework

Exploitation of biofilms for industrial processes requires them to adopt suitable physical structures for rendering them efficient and predictable. While hydrodynamics could be used to control material features of biofilms of the platform strain Pseudomonas putida KT2440 there is a dearth of experimental data on surface-associated growth behavior in such settings. Millimeter scale biofilm patterns formed by its parental strain P. putida mt-2 under different Reynolds numbers (Re) within laminar regime were analyzed using an upscale experimental continuous cultivation assembly. A tile-scan image acquisition process combined with a customized image analysis revealed patterns of dense heterogeneous structures at Re = 1000, but mostly flattened coverings sparsely patched for Re < 400. These results not only fix the somewhat narrow hydrodynamic regime under which P. putida cells form stable coatings on surfaces destined for large-scale processes, but also provide useful sets of parameters for engineering catalytic biofilms based on this important bacterium as a cell factory.