Synthesis and in vitro studies of biodegradable modified chitosan nanoparticles for photodynamic treatment of cancer

The main aim of this research is to study the in vitro photocytotoxicity and cellular uptake of biodegradable polymeric nanoparticles loaded with photosensitizer mTHPP. As the first part of a continued research on conversion of N-sulfonato-N,O-carboxymethylchitosan (NOCCS) to useful biopolymer-based materials, large numbers of carboxylic functional groups were introduced onto NOCCS by grafting with polymethacrylic acid (PMAA). The free radical graft copolymerization was carried out at 70 °C, bis-acrylamide as a cross-linking agent and persulfate as an initiator. These results show that the nanoparticles have high loading capacity and stability. These nanoparticles are suitable as carriers for photodynamic therapy in vivo.     

Synthesis and characterization of chitosan-based hydrogels

Biocompatible hydrogels based on water-soluble chitosan–ethylene glycol acrylate methacrylate (CS–EGAMA) and polyethylene glycol diamethacrylate (PEGDMA) were synthesized by photopolymerization. Characterization of morphology, weight loss, water state of hydrogel, pH-sensitivity and cytotoxicity were investigated by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), swelling test and methylthiazolydiphenyl-tetrazolium bromide (MTT) assay. The results indicated that the hydrogels were sensitive to pH of the medium, no cytotoxicity for L929 and SW1353, satisfactory for the composite to be used in bioapplications.     

Synthesis and properties of chitosan hydrogels modified with heterocycles

Preparation and properties of chitosan modified with heterocycles in absence or presence of gluteraldehyde as a cross linker is described. New modified chitosan–heterocyclic hydrogels were prepared from chitosan and heterocyclic compounds such as N,N′-biisomaleimide, N,N′-biisophthalimide, and N,N′-phthalimidomaleimide via a crosslinking reaction. The new hydrogels chemical structure was characterized by spectral analysis (IR), X-ray diffraction, thermal gravimetric analysis (TGA), solubility, and swellability in water and different organic solvents. Evaluation of the efficiency of the new hydrogels to uptake copper and cobalt ions from aqueous systems was carried out and promising results were obtained.     

Synthesis and characterization of PEG dimethacrylates and their hydrogels

Facile synthesis and detailed characterization of photopolymerizable and biocompatible poly(ethylene glycol) dimethacrylates (PEGDM) and poly(ethylene glycol) urethane-dimethacrylates (PEGUDM) are described. Poly(ethylene glycol)s of various molecular masses (M(n) = 1000 to 8000 g/mol) were reacted with methacrylic anhydride or with 2-isocyanatoethyl methacrylate to form PEGDMs and PEGUDMs, respectively. PEGDMs were also prepared by a microwave-assisted route to achieve fast reaction conversions under solvent free conditions. Combined analyses of (1)H NMR and MALDI-TOF MS confirmed the formation of prepolymers of high purity and narrow mass distribution (PD < 1.02). Aqueous solutions of the PEGDMs and PEGUDMs (10% and 20% by mass fraction) were photopolymerized to yield hydrogels. Bovine chondrocytes, seeded in the hydrogels, were used to assess the biocompatibility. Preliminary rheology and uniaxial compression measurements showed varied mechanical response, and biocompatibility studies showed that cells are completely viable in both types of hydrogels after two weeks.     

Synthesis and characterization of PCL-b-PEO-b-PCL-based nanostructured and porous hydrogels

Hydrogels with nanoscale structure were synthesized using amphiphilic poly(epsilon-caprolactone)-poly(ethylene oxide)-poly(epsilon-caprolactone) (PCL-b-PEO-b-PCL) triblock copolymers. Small-angle X-ray scattering (SAXS) studies show that the block copolymers form 30-40 nm structures in aqueous solution and that these patterns are retained, with some increase in length scale, following electron beam cross-linking. Lamellar nanostructures were observed by SAXS and atomic force microscopy (AFM), with SAXS indicating cylindrical structure as the block lengths become more different in length. It is demonstrated through Fourier transform infrared spectroscopy (FTIR), mass loss, and differential scanning calorimetry (DSC) that the PCL can be completely removed by hydrolysis in NaOH(aq) to form porous PEO hydrogels. These hydrogels retain active functional groups following PCL removal that serve as sites for further chemical modification.     

Synthesis and characterization of radiopaque iodine-containing degradable PVA hydrogels

Poly (vinyl alcohol) (PVA) hydrogels are highly attractive for biomedical applications, especially for controlled release of drugs and proteins. Recently, degradable PVA hydrogels have been described, having the advantage that the material disappears over time from the implantation site. Herein, we report the synthesis of radiopaque degradable PVA, which gives a further advantage that the position of the hydrogel can precisely be determined by X-ray fluoroscopy. Radiopacity has been introduced by replacing 0.5% of the pendent alcohol groups on the PVA with 4-iodobenzoylchloride. This level of substitution rendered the polymer adequately radiopaque. The subsequent modification of 0.8% of the pendent hydroxyl groups with an ester acrylate functional group allowed for cross-linking of the macromers. The radiopaque hydrogels degraded over a time span of 140 days. Rheology data suggested that the macromer solutions were appropriate for injection.     

Synthesis and characterization of a new polysaccharide-graft-polymethacrylate copolymer for three-dimensional hybrid hydrogels

Hybrid materials constituted by hydrophobic and hydrophilic biocompatible macromolecules are useful for biomedical applications. In this context, a well-known acrylic monomer (methyl methacrylate) was polymerized and grafted onto the polysaccharide dextran by the use of ceric ammonium nitrate as a redox initiator in aqueous nitric acid medium. The effects of concentrations of dextran, acrylic monomer, and ceric ions on the copolymerization yields were investigated in detail. The obtained polymers were studied by solubility measurements, Fourier transform infrared spectrometry, (13)C nuclear magnetic resonance spectroscopy, and viscosimetric analysis. Interestingly, we found conditions to form transparent and homogeneous thin films or 3D structures with hybrid properties. Indeed, the copolymer, but not dextran or PMMA, could be dissolved in water/THF (20/80 v/v). The thermomechanical properties of the resulting copolymer analyzed by differential scanning calorimetry and dynamic mechanical analysis showed the occurrence of a single glass-transition temperature and a marked difference with the two homopolymers. The cytocompatibility of the copolymer with human endothelial cells was evidenced by the normal cell adhesion, proliferation, and morphology after 5 days in culture on these gels. In conclusion, this type of copolymer with hybrid properties of two biocompatible macromolecules could be of great interest as a 3D scaffold or for coating in biomedical applications.     

Synthesis and characterization of thermally and chemically gelling injectable hydrogels for tissue engineering

Novel, injectable hydrogels were developed that solidify through a physical and chemical dual-gelation mechanism upon preparation and elevation of temperature to 37 °C. A thermogelling, poly(N-isopropylacrylamide)-based macromer with pendant epoxy rings and a hydrolytically degradable polyamidoamine-based diamine cross-linker were synthesized, characterized, and combined to produce in situ forming hydrogel constructs. Network formation through the epoxy-amine reaction was shown to be rapid and facile, and the progressive incorporation of the hydrophilic polyamidoamine cross-linker into the hydrogel was shown to mitigate the often problematic tendency of thermogelling materials to undergo significant postformation gel syneresis. The results suggest that this novel class of injectable hydrogels may be attractive substrates for tissue engineering applications due to the synthetic versatility of the component materials and beneficial hydrogel gelation kinetics and stability.     

Synthesis and characterization of biodegradable cationic poly(propylene fumarate-co-ethylene glycol) copolymer hydrogels modified with agmatine for enhanced cell adhesion

We synthesized positively charged biodegradable hydrogels by cross-linking of agmatine-modified poly(ethylene glycol)-tethered fumarate (Agm-PEGF) and poly(propylene fumarate-co-ethylene glycol) (P(PF-co-EG)) to investigate the effect of the guanidino groups of the agmatine on hydrogel swelling behavior and smooth muscle cell adhesion to the hydrogels. The weight swelling ratio of these hydrogels at pH 7.0 increased from 279 +/- 4 to 306 +/- 7% as the initial Agm-PEGF content increased from 0 to 200 mg/g of P(PF-co-EG), respectively. The diffusional exponents, n, during the initial phase of water uptake were independent of the initial Agm-PEGF content and were determined to be 0.66 +/- 0.08, 0.71 +/- 0.07, and 0.60 +/- 0.05 for respective initial Agm-PEGF contents of 0, 100, and 200 mg/g. The heat of fusion of water present in the hydrogels increased from 214 +/- 11 to 254 +/- 4 J/g as the initial Agm-PEGF content increased from 0 to 200 mg/g. The number of adherent smooth muscle cells increased dose-dependently from 15 +/- 6 to 75 +/- 7% of the initial seeding density as the initial Agm-PEGF content increased from 0 to 200 mg/g. These results suggest that the incorporation of the guanidino groups of agmatine into P(PF-co-EG) hydrogels increases the hydrogel free water content and the total water content of the hydrogels and also enhances cell adhesion to the hydrogels.     

Synthesis and characterization of chondroitin sulfate–methacrylate hydrogels

The various degree of methacrylate (MA) substitution on chondroitin sulfate (CS) was prepared by reacting chondroitin sulfate with methacrylic anhydride (MAA) in the presence of sodium hydroxide (NaOH) as a base. The effects of reaction time, reaction temperature, MAA concentration, and NaOH amount on the substitution degree of CS-MA were tested. The confirmation of the CS-MA chemical structure was carried out by ¹H-NMR, ¹³C-NMR, FTIR and the degree of MA substituent on CS was calculated from the ratios of two peak intensities corresponding to methyl groups on methacrylate and chondroitin sulfate, respectively. Hydrogels were prepared by free radical polymerization of CS-MA precursors with or without acrylic acid (AA). CS-MA hydrogels were easily broken into small pieces during swelling study. However, CS-MA-AA hydrogels remained completely and showed a range of swelling ratio from 200 to 390% and exhibited an increase in swelling ratio with a decreasing degree of MA substitution. The thermal degradability observed with a TGA explained the unstableness of these hydrogels in comparison with the pure CS. The surface morphology conducted by SEM exhibited a porous structure after swelling.     

Molecular weight characterization of starch and modified starches as tricarbanilate derivatives

Industrial corn starches modified with an oxidant, acid or enzyme have been analyzed by a high-performance size-exclusion chromatography (HPSEC) technique. The procedure involves derivatization of the starch to the corresponding tricarbanilate with separation afforded by commercially available polystyrene-divinylbenzene (PS-DVB) gel columns. Separation time was under 30 min and UV detection at 235 nm allows the analysis of microgram quantities. The elution behavior of amylose and amylopectin tricarbanilates appears to depend on allowed conformational states. Amylopectin tricarbanilate (APTC) is hindered by branching and elutes much earlier than the exclusion limit of the column system according to linear polystyrene standards. Observation of an apparent hydrolysis resistant region of starch and the effects of the various hydrolytic treatments are discussed. Relative molecular weight data are presented utilizing the carbanilate of monodisperse pullulan polysaccharides as primary standards.     

Silk fibroin hydrogels for potential applications in photodynamic therapy

In this study, we prepared translucid hydrogels with different concentrations of silk fibroin, extracted from raw silk fibers, and used them as a matrix to incorporate the photosensitizer 5-(4-aminophenyl)-10,15,20-tris-(4-sulphonatophenyl) porphyrin trisodium for application in photodynamic therapy (PDT). The hydrogels obtained were characterized by rheology, spectrophotometry, and scattering techniques to elucidate the factors involved in the formation of the hydrogel, and to characterize the behavior of silk fibroin (SF) after incorporating of the porphyrin to the matrix. The rheology results demonstrated that the SF hydrogels had a shear thinning behavior. In addition, we were able to verify that the structure of the material was able to be recovered over time after shear deformation. The encapsulation of porphyrins in hydrogels leads to the formation of self-assembled peptide nanostructures that prevent porphyrin aggregation, thereby greatly increasing the generation of singlet oxygen. Also, our findings suggest that porphyrin can diffuse out of the hydrogel and permeate the outer skin layers. This evidence suggests that SF hydrogels could be used as porphyrin encapsulation and as a drug carrier for the sustained release of photosensitizers for PDT.     

Synthesis and properties of carboxymethylchitosan hydrogels modified with poly(ester-urethane)

Preparation and properties of carboxymethylchitosan (CMC) modified with polyurethane (PU) containing poly(ethylene adipate) (PEA) as a soft segment is described. Urethane prepolymer was first synthesized by the reaction of PEA with an excess of 1,6-hexamethylene diisocyanate (HDI) to terminate its ends with isocyanate functional groups, followed by chain extension reaction using ethylene glycol as a chain extender. Its chemical structure was characterized by ¹H NMR and FTIR, molecular weight by GPC, and thermal behavior by DSC. To prepare PU-modified CMC (CMC-PU), 1–60 wt% of PU were introduced into the CMC solution of THF:H₂O mixture (50:50 v/v) in the presence of 10 wt% of hexamethylene-1,6-di-(aminocarboxysulfonate) (HDA) to increase network density. Formation of the network structure was confirmed by investigating percent crosslinking and water swelling properties of CMC-PU compared to CMC network without PU. When percent of PU increased from 1 to 60 wt%, percent crosslinking of CMC-PU gradually increased up to 82%, whereas equilibrium water content (EWC) dropped and retained at 1000%. SEM showed microphase separation of PU (10–50 μm) thoroughly dispersed in CMC surface and in the bulk. In addition, CMC-PU exhibited a slight enhancement in toughness properties. Cytotoxicity and biocompatibility tests indicated that CMC-PU was non-toxic.     

Synthesis and characterization of hydrogels based on grafted chitosan for the controlled drug release

Temperature and pH-responsive hydrogels based on chitosan grafted with poly acrylic acid (PAAc), poly hydroxy propyl methacrylate (PHPMA), poly (vinyl alcohol) (PVA) and gelatin were prepared for controlled drug delivery. These stimuli-responsive hydrogels were synthesized by gamma irradiation technique. The degree of gelation was over 90% and increased as chitosan, AAc and PVA content increased, while the degree of gelation decrease with the increase of gelatin content. The equilibrium swelling studies of hydrogels prepared in various conditions were carried out in an aqueous solution, and the pH sensitivity in the range of 2–9 was investigated. An increase of swelling degree with an increase in the pH was noticed and showed the highest value at pH 9. Also antibiotic drug Oxttetracycline was loaded into the hydrogels and the release studies were carried out at different pH and temperature. The in vitro release profiles of the drug showed that, the release of the drug increased as the time, temperature and pH increased and reached to maximum after 48 h at pH 9. The prepared hydrogels were characterized by using SEM, FTIR, and DSC.     

Synthesis and characterization of dendron cross-linked PEG hydrogels as corneal adhesives

In pursuit of a wound-specific corneal adhesive, hydrogels formed by the reaction of propionaldehyde, butyraldehyde, or 2-oxoethyl succinate-functionalized poly(ethylene glycol) (PEG) with a peptide-based dendritic cross-linker (Lys(3)Cys(4)) were characterized. These macromers react within minutes of mixing to form transparent and elastic hydrogels with in vitro degradation times that range from hours to months based on the type of bonds formed during the cross-linking reaction, either thiazolidine or pseudoproline. The mechanical properties of these materials, determined via parallel plate rheology, were dependent on the polymer concentration, as was the hydrogel adhesive strength, which was determined by lap shear adhesive testing. In addition, these hydrogels were efficacious in closing ex vivo 4.1 mm central corneal lacerations: wounds closed with these hydrogel adhesives were able to withstand intraocular pressure values equivalent to, or in excess of, those obtained by closing the wounds with suturing.     

Synthesis and characterization of Guar gum based biopolymeric hydrogels as carrier materials for controlled delivery of methotrexate to treat colon cancer

Guar Gum has been evaluated for its importance in food and pharmaceutical industry. A blended biopolymeric hydrogel was prepared by solution casting technique using guar gum (GG), chitosan (CS), polyvinyl alcohol (PVA), chemically crosslinked with tetra orthosilicate (TEOS) and impregnated with methotrexate (MTX) to assess its drug carrying capacity against colon cancer (HCT-116). The surface morphology, chemical bonding, hydrophilicity and water absorbing capacity were analyzed by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), contact angle measurements and swelling properties in variable conditions. Furthermore, degradation, drug release kinetics, hemocompatibility, and cytotoxicity of MTX-loaded hydrogel was tested. The release of MTX from GG/CS/PVA biopolymeric blend occurred in sustained manner. Results displayed that in 7 h 25 min duration 96% of the drug was released in phosphate buffer saline (PBS) at pH 7.4. These blends were non-hemolytic, and antiproliferative against HCT-116. Furthermore, the MTT assay has revealed that MTX-loaded hydrogel had prominently decreased the cell viability (with IC50 11.7 µg/ml) as compared to free MTX (with IC50 21.57 µg/ml). Hence, these results suggest that guar gum based hydrogels are potential biomaterials for colon cancer treatment.     

Synthesis and characterization of flavin modified oligodeoxyribonucleotide.

Oligonucleotides covalently linked to isoalloxazines via polymethylene linker were synthesized and characterized. The thymidine decamer having a primary aminoalkyl group at the 5'-end of internucleotide linkage was coupled with the activated ester of isoalloxazine in liquid-phase. The interaction of the flavin modified thymidine decamers with polydA was investigated by using spectrophotometric method.     

Environment friendly modified chitosan hydrogels as a matrix for adsorption of metal ions, synthesis and characterization

Environment friendly modified chitosan hydrogels for metal ions absorption from aqueous systems were designed using simple technology. Chitosan was modified with [N,N′-bi-α-azidosuccinimide and N-phthalimido-α-azide succinimide] under different reaction conditions to prepare new hydrogels with high metal ion absorption efficiency. The hydrogels were characterized by FTIR, thermal stability, crystallography, solubility and swelling capacity. Promising results were obtained from this preliminary study to evaluate the efficiency of the new hydrogels to uptake copper and cobalt ions from aqueous systems.     

New biodegradable hydrogels based on a photocrosslinkable modified polyaspartamide: synthesis and characterization.

alpha,beta-Poly(N-2-hydroxyethyl)-DL-aspartamide (PHEA), a synthetic water-soluble biocompatible polymer, was derivatized with glycidyl methacrylate (GMA), in order to introduce in its structure chemical residues having double bonds and ester groups. The obtained copolymer (PHG) contained 29 mol% of GMA residues. PHG aqueous solutions at various concentrations ranging from 30 to 70 mg/ml were exposed to a source of UV rays at lambda 254 nm in the presence or in the absence of N,N'-methylenebisacrylamide (BIS); the formation of compact gel phases was observed beginning from 50 mg/ml. The obtained networks were characterized by FT-IR spectrophotometry and swelling measurements which evidenced the high affinity of PHG hydrogels towards aqueous media at different pH values. In vitro chemical or enzymatic hydrolysis studies suggested that the prepared samples undergo a partial degradation both at pH 1 and pH 10 and after incubation with enzymes such as esterase, pepsin and alpha-chymotrypsin. Finally, the effect of irradiation time on the yield and the properties of these hydrogels was investigated and the sol fractions coming from irradiated samples, properly purified, were characterized by FT-IR and 1H-NMR analyses.