Organization of the F0 sector of Escherichia coli H+-ATPase: the polar loop region of subunit c extends from the cytoplasmic face of the membrane

The membrane-spanning F0 sector of the Escherichia coli H+-transporting ATP synthase (EC 3.6.1.34) contains multiple copies of subunit c, a 79 amino acid residue protein that is thought to insert in the membrane like a hairpin with two membrane traversing alpha-helices. The center of the protein is much more polar than the putative transmembrane alpha-helices and has been postulated to play a crucial role in coupling H+ translocation through F0 to ATP synthesis in the membrane extrinsic, F1 sector of the complex. However, the direction of insertion of subunit c in the membrane has not been established. We show here that the "polar loop" lies on the F1 binding side of the membrane. A peptide corresponding to Lys34----Ile46 of the polar loop was synthesized. Antisera were generated to the Lys34----Ile46 cognate peptide, and the polyclonal antipeptide IgG was shown to bind to a crude F0 fraction by using enzyme-linked immunosorbent assays. The antipeptide serum did not bind tightly enough to F0 to disrupt function. However, a polyclonal antiserum made to purified, whole subunit c was shown to block the binding of F1 to the F0 exposed in F1-stripped membranes. Incubation of the antisubunit c serum with the peptide reduced the inhibitory effect of the antiserum on the binding of F1 to F0. The reversal of inhibition by the peptide was specific to the antisubunit c serum in that the peptide had no effect on inhibition of F1 binding to F0 by antiserum to subunit a of F0.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structural and functional characterization of subunits of the F0 sector of the mitochondrial F0F1-ATP synthase.

Proteolytic digestion of F1-depleted submitochondrial particles (USMP), reconstitution with isolated subunits and titration with inhibitors show that the nuclear-encoded PVP protein, previously identified as an intrinsic component of bovine heart F0 (F01) (Zanotti, F. et al. (1988) FEBS Lett. 237, 9-14), is critically involved in maintaining the proper H+ translocating configuration of this sector and its correct binding to the F1 catalytic moiety. Trypsin digestion of USMP, under conditions leading to cleavage of the carboxyl region of the PVP protein and partial inhibition of transmembrane H+ translocation, results in general loss of sensitivity of this process to F0 inhibitors. This is restored by addition of the isolated PVP protein. Trypsin digestion of USMP causes also loss of oligomycin sensitivity of the catalytic activity of membrane reconstituted soluble F1, which can be restored by the combined addition of PVP and OSCP, or PVP and F6. Amino acid sequence analysis shows that, in USMP, modification by [14C] N,N'-dicyclohexylcarbodiimide of subunit c of F0 induces the formation of a dimer of this protein, which retains the 14C-labelled group. Chemical modification of cysteine-64 of subunit c results in inhibition of H+ conduction by F0. The results indicate that proton conduction in mitochondrial F0 depends on interaction of subunit c with the PVP protein.     

Mitochondrial ATP synthase complex. Membrane topography and stoichiometry of the F0 subunits.

The topography of the subunits of the membrane sector F0 of the ATP synthase complex in the bovine mitochondrial inner membrane was studied with the help of subunit-specific antibodies raised to the F0 subunits b, d, 6, F6, A6L, OSCP (oligomycin-sensitivity-conferring protein), and N,N' -dicyclohexylcarbodiimide (DCCD)-binding proteolipid and to the ATPase inhibitor protein (IF1) as an internal control. Exposure of F0 subunits in inverted and right-side-out inner membranes was investigated by direct antibody binding as well as by susceptibility of these subunits to degradation by various proteases as monitored by gel electrophoresis of the membrane digests and immunoblotting with the subunit-specific antibodies. Results show that subunits b, d, F6, A6L (including its C-terminal end) and OSCP were exposed on the matrix side. Sufficient masses of these subunits to recognize antibodies or undergo proteolysis were not exposed on the cytosolic side. This was also the case for subunit 6 and the DCCD-binding proteolipid on either side of the inner membrane. Quantitative immunoblotting in which bound radio-activity from [125I]protein A was employed to estimate the concentration of an antigen in a sample allowed the determination of the stoichiometry of several F0 subunits and IF1 relative to F1-ATPase. Results showed that per mol of F1 there are in bovine heart mitochondria 1 mol each of d, OSCP, and IF1, and 2 mol each of b and F6. Subunit 6 and the DCCD-binding proteolipid could not be quantitated, because the former transferred poorly to nitrocellulose and the latter's antibody did not bind [125I]protein A.     

Topology and function of "stalk" proteins in the bovine mitochondrial H+-ATPase

Proton translocating ATPases comprise a hydrophilic sector F1, a membrane sector F0, and, in the case of bovine mitochondria, a connecting "stalk" which is believed to contain the oligomycin sensitivity-conferring protein (OSCP) and coupling factor 6 (F6). The present study was undertaken to verify the accessibility of F6 and OSCP to trypsin and to examine the functional consequences of such treatment. Our data show that F1 binds equally to trypsin-treated F0 and untreated F0, but the former complexes exhibit cold lability and only partial sensitivity to oligomycin. Furthermore, these complexes fail to exhibit ATP-driven proton translocation or ATP-32Pi exchange activity. Trypsinization of F0 does not, however, inhibit passive proton conductance through the membrane sector but actually enhances it. Immunological data indicate extensive degradation of OSCP under conditions where F6 proteolysis is insignificant. Intact H+-ATPase complexes are relatively resistant to both the structural and functional effects of trypsin. We conclude that OSCP is predominantly an extrinsic protein which is shielded by F1 in the native membrane. F6 may also be an extrinsic protein but is shielded from trypsinization by OSCP and/or other F0 polypeptides. The exposed, trypsin-sensitive segments of OSCP are not required for passive proton conductance through F0 but may be required for ATP-driven reactions. We propose that bovine mitochondrial OSCP is a functional analogue of subunit b in the Escherichia coli H+-ATPase.     

Synthesis of a functional F0 sector of the Escherichia coli H+-ATPase does not require synthesis of the alpha or beta subunits of F1.

The uncB, E, F, and H genes of the Escherichia coli unc operon were cloned behind the lac promoter of plasmid pUC9, generating plasmid pBP101. These unc loci code, respectively, for the chi, omega, and psi subunits of the F0 sector and the delta subunit of the F1 sector of the H+-ATP synthase complex. Induction of expression of the four unc genes by the addition of isopropyl-beta-D-thiogalactoside resulted in inhibition of growth. During isopropyl-beta-D-thiogalactoside induction, the three subunits of F0 were integrated into the cytoplasmic membrane with a resultant increase in H+ permeability. A functional F0 was formed from plasmid pBP101 in a genetic background lacking all eight of the unc structural genes coding the F1F0 complex. In the unc deletion background, a reasonable correlation was observed between the amount of F0 incorporated into the membrane and the function measured, i.e., high-affinity binding of F1 and rate of F0-mediated H+ translocation. This correlation indicates that most or all of the F0 assembled in the membrane is active. Although the F0 assembled under these conditions binds F1, only partial restoration of NADH-dependent or ATP-dependent quenching of quinacrine fluorescence was observed with these membranes. Proteolysis of a fraction of the psi subunit may account for this partial deficiency. The experiments described demonstrate that a functional F0 can be assembled in vivo in E. coli strains lacking genes for the alpha, beta, gamma, and epsilon subunits of F1.     

Sec/SRP requirements and energetics of membrane insertion of subunits a, b, and c of the Escherichia coli F1F0 ATP synthase

Previously, the role of YidC in the membrane protein biogenesis of the F(0) sector of the Escherichia coli F(1)F(0) ATP synthase was investigated. Whereas subunits a and c of the F(1)F(0) ATP synthase were strictly dependent on YidC for membrane insertion, subunit b required YidC for efficient insertion (Yi, L., Jiang, F., Chen, M., Cain, B., Bolhuis, A., and Dalbey, R. E. (2003) Biochemistry 42, 10537-10544). In this paper, we investigated other protein components and energetics that are required in the membrane protein assembly of the F(0) sector subunits. We show here that the Sec translocase and the signal recognition particle (SRP) pathway are required for membrane insertion of subunits a and b. In contrast, subunit c required neither the Sec machinery nor the SRP pathway for insertion. While the proton motive force was not required for insertion of subunits b and c, it was required for translocation of the negatively charged periplasmic NH(2)-terminal tail of subunit a, whereas periplasmic loop 2 of subunit a could insert in a proton motive force-independent manner. Taken together, the in vivo data suggest that subunits a and b are inserted by the Sec/SRP pathway with the help of YidC, and subunit c is integrated into the membrane by the novel YidC pathway.     

Membrane integration and function of the three F0 subunits of the ATP synthase of Escherichia coli K12

Integration into the cytoplasmic membrane and function of the three F0 subunits, a, b and c, of the membrane-bound ATP synthase of Escherichia coli K12 were analysed in situations where synthesis of only one or two types of subunits was possible. This was achieved by combined use of atp mutations and plasmids carrying and expressing one or two of the atp genes coding for ATP synthase subunits. AU three F0 subunits were found to be required for the establishment of efficient H+ conduction. Subunits a and b individually as well as together were found to bind F1 ATPase to the membrane while subunit c did not. The ATPase activity bound to either of these single subunits, or in pairwise combinations, was not inhibited by N,N'-dicyclohexylcarbodiimide. Also ATP-dependent H+ translocation was not catalysed unless all three F0 subunits were present in the membrane. The integration into the membrane of the subunits a and b was independent of the presence of other ATP synthase subunits.     

Structural interpretations of F(0) rotary function in the Escherichia coli F(1)F(0) ATP synthase

F(1)F(0) ATP synthases are known to synthesize ATP by rotary catalysis in the F(1) sector of the enzyme. Proton translocation through the F(0) membrane sector is now proposed to drive rotation of an oligomer of c subunits, which in turn drives rotation of subunit gamma in F(1). The primary emphasis of this review will be on recent work from our laboratory on the structural organization of F(0), which proves to be consistent with the concept of a c(12) oligomeric rotor. From the NMR structure of subunit c and cross-linking studies, we can now suggest a detailed model for the organization of the c(12) oligomer in F(0) and some of the transmembrane interactions with subunits a and b. The structural model indicates that the H(+)-carrying carboxyl of subunit c is located between subunits of the c(12) oligomer and that two c subunits pack in a front-to-back manner to form the proton (cation) binding site. The proton carrying Asp61 side chain is occluded between subunits and access to it, for protonation and deprotonation via alternate entrance and exit half-channels, requires a swiveled opening of the packed c subunits and stepwise association with different transmembrane helices of subunit a. We suggest how some of the structural information can be incorporated into models of rotary movement of the c(12) oligomer during coupled synthesis of ATP in the F(1) portion of the molecule.     

Mechanics of coupling proton movements to c-ring rotation in ATP synthase

F1F0 ATP synthases generate ATP by a rotary catalytic mechanism in which H+ transport is coupled to rotation of an oligomeric ring of c subunits extending through the membrane. Protons bind to and then are released from the aspartyl-61 residue of subunit c at the center of the membrane. Subunit a of the F0 sector is thought to provide proton access channels to and from aspartyl-61. Here, we summarize new information on the structural organization of Escherichia coli subunit a and the mapping of aqueous-accessible residues in the second, fourth and fifth transmembrane helices (TMHs). Aqueous-accessible regions of these helices extend to both the cytoplasmic and periplasmic surface. We propose that aTMH4 rotates to alternately expose the periplasmic or cytoplasmic half-channels to aspartyl-61 of subunit c during the proton transport cycle. The concerted rotation of interacting helices in subunit a and subunit c is proposed to be the mechanical force driving rotation of the c-rotor, using a mechanism akin to meshed gears.     

Structural and functional relationship of ATP synthases (F1F0) from Escherichia coli and the thermophilic bacterium PS3

Functional compatibility between the F1 and F0 parts of ATP synthases from Escherichia coli (EF1F0) and the thermophilic bacterium PS3 (TF1F0) was analyzed. F1-stripped everted membrane vesicles from both organisms bound the homologous or heterologous F1 part to the same extent. Titration of the reconstituted membrane vesicles with dicyclohexylcarbodiimide revealed a similar sensitivity of the homologous and hybrid F1F0 complexes towards the inhibitor. Furthermore, the heterologous enzymes exhibited ATP-dependent H+ translocation comparable to that of homologous F1F0. Antisera raised against EF1 or subunits a, b, and c of EF0 were analyzed for cross-reactivity with TF1 and TF0. Common antigenic sites have been detected with immunoblot analysis for subunit beta and subunit c of EF1F0 and the corresponding subunits from TF1F0. A weak binding of the anti-a and anti-b antisera with the TF0 part has been observed in an enzyme-linked immunosorbent assay. Based on these findings the structural and functional relationship between the mesophilic and thermophilic ATP synthase complexes is discussed.     

Topological and functional aspects of the proton conductor,F0, of theEscherichia coli ATP-synthase

The isolated H+ conductor, F0, of the Escherichia coli ATP-synthase consists of three subunits, a, b, and c. H+-permeable liposomes can be reconstituted with F0 and lipids; addition of F1-ATPase reconstitutes a functional ATP-synthase. Mutants with altered or missing F0 subunits are defective in H+ conduction. Thus, all three subunits are necessary for the expression of H+ conduction. The subunits a and b contain binding sites for F1. Computer calculations, cross-links, membrane-permeating photo-reactive labels, and proteases were used to develop tentative structural models for the individual F0 subunits.     

H+-ATPase activity of Escherichia coli F1F0 is blocked after reaction of dicyclohexylcarbodiimide with a single proteolipid (subunit c) of the F0 complex

Dicyclohexylcarbodiimide (DCCD) specifically inhibits the F1F0-H+-ATP synthase complex of Escherichia coli by covalently modifying a proteolipid subunit that is embedded in the membrane. Multiple copies of the DCCD-reactive protein, also known as subunit c, are found in the F1F0 complex. In order to determine the minimum stoichiometry of reaction, we have treated E. coli membranes with DCCD, at varying concentrations and for varying times, and correlated inhibition of ATPase activity with the degree of modification of subunit c. Subunit c was purified from the membrane, and the degree of modification was determined by two methods. In the "specific radioactivity" method, the moles of [14C]DCCD per total mole of subunit c was calculated from the radioactivity incorporated per mg of protein, and conversion of mg of protein to mol of protein based upon amino acid analysis. In the "high performance liquid chromatography (HPLC) peak area" method, the DCCD-modified subunit c was separated from unmodified subunit c on an anion exchange AX300 HPLC column, and the areas of the peaks from the chromatogram quantitated. The shape of the modification versus inhibition curve indicated that modification of a single subunit c per F0 was sufficient to abolish ATPase activity. The titration data were fit by nonlinear regression analysis to a single hit mathematical model, A = Un(1 - r) + r, where A is the relative activity, U is the ratio of unmodified/total subunit c, n is the number of subunit c per F0, and r is a residual fraction of ATPase activity that was resistant to inhibition by DCCD. The two methods gave values for n equal to 10 by the specific radioactivity method and 14 by the HPLC peak area method, and values for r of 0.28 and 0.30, respectively. Most of the r value was accounted for by the observed dissociation of 15-20% of the F1-ATPase from the membrane under ATPase assay conditions. When the minimal, experimentally justified value of r = 0.15 was used in the equation above, the calculated values of n were reduced to 8 and 11, respectively. The value of n determined here, with a probable range of uncertainty of 8-14, is consistent with, and provides an independent type of experimental support for, the suggested stoichiometry of 10 +/- 1 subunit c per F1F0, which was determined by a more precise radiolabeling method (Foster, D. L., and Fillingame, R. H. (1982) J. Biol. Chem. 257, 2009-2015).     

Mutations in three of the putative transmembrane helices of subunit a of the Escherichia coli F1F0-ATPase disrupt ATP-driven proton translocation

Three missense mutants in subunit a of the Escherichia coli F1F0-ATPase were isolated and characterized after hydroxylamine mutagenesis of a plasmid carrying the uncB (subunit a) gene. The mutations resulted in Asp119----His, Ser152----Phe, or Gly197----Arg substitutions in subunit a. Function was not completely abolished by any of the mutations. The F0 membrane sector was assembled in all three cases as judged by restoration of dicyclohexylcarbodiimide sensitivity to the F1F0-ATPase. The H+ translocation capacity of F0 was reduced in all three mutants. ATP-driven H+-translocation was also reduced, with the response in the Gly197----Arg mutant being almost nil and that in the Asp119----His and Ser152----Phe mutants less severely affected. The substituted residues are predicted to lie in the second, third, and fourth transmembrane helices suggested in most models for subunit a. The Gly197----Arg mutation lies in a very conserved region of the protein and the substitution may disrupt a structure that is critical to function. The Asp119----His and Ser152----Phe mutations also lie in areas with sequence conservation. A further analysis of randomly generated mutants may provide more information on regions of the protein that are crucial to function. Heterodiploid transformants, carrying plasmids with either the wild-type uncB gene or mutant uncB genes in an uncB (Trp231----stop) background, were characterized biochemically. The truncated subunit a was not detected in membranes of the background strain by Western blotting, and the uncB+ plasmid complemented strain showed normal biochemistry. The uncB mutant genes were shown to cause equivalent defects in either the heterodiploid background configuration, or after incorporation into an otherwise wild-type unc operon. The subunit a (Trp231----stop) background strain was shown to bind F1-ATPase nearly normally despite lacking subunit a in its membrane.     

F1F0-ATPase from Escherichia coli with mutant F0 subunits. Partial purification and immunoprecipitation of F1F0 complexes

Previously identified mutations in subunits a and b of the F0 sector of the F1F0-ATPase from Escherichia coli are further characterized by isolating detergent-solubilized, partially purified F1F0 complexes from cells bearing these mutations. The composition of the various F1F0 complexes was judged by quantitating the amount of each subunit present in the detergent-solubilized preparations. The composition of the F0 sectors containing altered polypeptides was determined by quantitating the F0 subunits that were immunoprecipitated by antibodies directed against the F1 portion. In this way, the relative amounts of F0 subunits (a, b, c) which survived the isolation procedure bound to F1 were determined for each mutation. This analysis indicates that both missense mutations in subunit a (aser206----leu and ahis245----tyr) resulted in the isolation of F1F0 complexes with normal subunit composition. The nonsense mutation in subunit a (atyr235----end) resulted in isolation of a complex containing the b and c subunits. The bgly131----asp mutation in the b subunit results in an F0 complex which does not assemble or survive the isolation. The isolated F1F0 complex containing the mutation bgly9----asp in the b subunit was defective in two regards: first, a reduction in F1 content relative to F0 and second, the absence of the a subunit. Immunoprecipitations of this preparation demonstrated that F1 interacts with both c and mutant b subunits. A strain carrying the mutation, bgly9----asp, and the compensating suppressor mutation apro240----leu (previously shown to be partially unc+) yielded an F1F0 ++ complex that remained partially defective in F1 binding to F0 but normal in the subunit composition of the F0 sector. The assembly, structure, and function of the F1F0-ATPase is discussed.     

The DCCD-reactive aspartyl-residue of subunit C from the Escherichia coli ATP-synthase is important for the conformation of F0

The effect of various point mutations in subunits a and and c of the E. coli ATP-synthase was characterized. In each of the mutants there was no F0-dependent H+-conduction, but still an ATPase-activity comparable to wildtype activities. In addition, the subunit b could be extracted from the mutant's F0 but not from the F0 of wildtype. The effects are interpreted as a change in the conformation of F0 caused by the different mutations.     

Integration of F1 and the membrane sector of the proton-ATPase of Escherichia coli. Role of subunit "b" (uncF protein)

Membranes derived from the Escherichia coli strain AN1460 which carries the multicopy plasmid pAN45 (unc+) (Downie, J. A., Langman, L., Cox, G. B., Yanofsky, C., and Gibson, (1980) J. Bacteriol. 143, 8-17) were enriched 5- to 10-fold in proton-ATPase activity. Incubation of F1-depleted AN1460 membranes with trypsin abolished F1-binding ability but did not inhibit proton transport through the membrane sector (F0). Sodium dodecyl sulfate-gel electrophoresis indicated that subunit "b" (uncF protein) of F0 was cleaved by trypsin and prebound F1 protected against the trypsin effect. Subunits "a" (uncB protein) and "c" (uncE protein) were unaffected by the trypsin treatment. A water-soluble fragment (Mr = 14,800) was liberated after trypsin treatment and appeared to arise from subunit b. Studies of enzyme hybridization and of F1 binding to membranes derived from strains containing mutations in uncB, F, and E genes supported the suggestion that subunit b is involved in F1 binding to the F0. Also, extraction of membranes with KSCN increased the relative proportion of subunit b in the membrane and this coincided with a parallel increase in trypsin-sensitive F1-binding ability. It is proposed that subunit b is involved in binding of F1 to the F0; this agrees with the presumed role of the protein as deduced from predictions of its secondary and tertiary structure (Walker, J. E., Saraste, M., and Gay, N. J. (1982) Nature (Lond.) 298, 867-869; Senior, A. E. (1983) Biochim. Biophys. Acta, in press).     

Mutations in the conserved proline 43 residue of the uncE protein (subunit c) of Escherichia coli F1F0-ATPase alter the coupling of F1 to F0

The conserved Pro43 residue of the uncE protein (subunit c) of the Escherichia coli F1F0-ATPase was changed to Ser or Ala by oligonucleotide-directed mutagenesis, and the mutations were incorporated into the chromosome. The resultant mutant strains were capable of oxidative phosphorylation as indicated by their ability to grow on succinate and had growth yields on glucose that were 80-90% of wild type. Membrane vesicles from the mutants were slightly less efficient than wild type vesicles in ATP-driven proton pumping as indicated by ATP-dependent quenching of quinacrine fluorescence. The decreased quenching response was not due to increased H+ leakiness of the mutant membranes or to loss of F1-ATPase activity from the membrane. These results indicate that the mutant F1F0-ATPases are defective in coupling ATP hydrolysis to H+ translocation. The membrane ATPase activity of the mutants was inhibited less by dicyclohexylcarbodiimide than that of wild type. The decrease in sensitivity to inhibition by dicyclohexylcarbodiimide was caused primarily by dissociation of the F1-ATPase from the mutant F0 in the ATPase assay mixture. These results support the idea that Pro43, and neighboring conserved polar residues play an important role in the binding and functional coupling of F1 to F0. Although a Pro residue is found at position 43 in all species of subunit c studied, surprisingly, it is not absolutely essential to function.     

Cross-linking and labeling of the Escherichia coli F1F0-ATP synthase reveal a compact hydrophilic portion of F0 close to an F1 catalytic subunit

The subunit arrangement of the F0 sector of the Escherichia coli ATP synthase is examined using hydrophilic and hydrophobic (cleavable) cross-linking reagents and the water-soluble labeling reagent [35S] diazoniumbenzenesulfonate ( [35S]DABS). Cross-linking is performed on purified ATP synthase and inverted minicell membranes. ATP synthase incorporated into liposomes is labeled with [35S]DABS. Three cross-linked products involving the F0 subunits (a, b, and c) are observed with the purified ATP synthase in solution: a-b, b2, and c2 dimers. A cross-link between the F0 and F1 is detected and occurs between the a and beta subunits. A cross-linker independent association between the b and beta subunits is also evident, suggesting that the two subunits are close enough to form a disulfide bridge. A cross-linking reagent stable to reducing agents produces a b-beta dimer, as detected by immunoblotting with anti-beta serum. The c subunit does not cross-link with any F1 polypeptide. Minicell membranes containing ATP synthase polypeptides radioactively labeled in vivo similarly show b2 and c2 dimers after cross-linking. [35S]DABS labels the a and b, but not c, subunits, showing that the a and b, but not c, subunits possess hydrophilic domains. Thus, certain domains of subunits a and b extend from the membrane and are in close proximity to one another and the F1 catalytic subunit beta.     

Insights into the rotary catalytic mechanism of F0F1 ATP synthase from the cross-linking of subunits b and c in the Escherichia coli enzyme

The transmembrane sector of the F(0)F(1) rotary ATP synthase is proposed to organize with an oligomeric ring of c subunits, which function as a rotor, interacting with two b subunits at the periphery of the ring, the b subunits functioning as a stator. In this study, cysteines were introduced into the C-terminal region of subunit c and the N-terminal region of subunit b. Cys of N2C subunit b was cross-linked with Cys at positions 74, 75, and 78 of subunit c. In each case, a maximum of 50% of the b subunit could be cross-linked to subunit c, which suggests that either only one of the two b subunits lie adjacent to the c-ring or that both b subunits interact with a single subunit c. The results support a topological arrangement of these subunits, in which the respective N- and C-terminal ends of subunits b and c extend to the periplasmic surface of the membrane and cAsp-61 lies at the center of the membrane. The cross-linking of Cys between bN2C and cV78C was shown to inhibit ATP-driven proton pumping, as would be predicted from a rotary model for ATP synthase function, but unexpectedly, cross-linking did not lead to inhibition of ATPase activity. ATP hydrolysis and proton pumping are therefore uncoupled in the cross-linked enzyme. The c subunit lying adjacent to subunit b was shown to be mobile and to exchange with c subunits that initially occupied non-neighboring positions. The movement or exchange of subunits at the position adjacent to subunit b was blocked by dicyclohexylcarbodiimide. These experiments provide a biochemical verification that the oligomeric c-ring can move with respect to the b-stator and provide further support for a rotary catalytic mechanism in the ATP synthase.     

Modification of subunit b of the F0 complex from Escherichia coli ATP synthase by a hydrophobic maleimide and its effects on F0 functions

Purified F0 from Escherichia coli ATP synthase was labelled with N-(7-dimethylamino-4-methyl-coumarinyl)-maleimide (DACM), a hydrophobic reagent which forms a stable, strongly fluorescent adduct with SH groups. Sodium dodecyl sulfate gel electrophoresis clearly demonstrated that subunit b was exclusively labelled, most likely at Cys-21, the only cysteine residue in E. coli F0. The amount of two molecules of DACM bound per F0, which was calculated from the absorption spectrum at 380 nm, is in full agreement with the postulated stoichiometry of two copies of subunit b/F0 complex. Thus the label provides a useful tool for simply detecting subunit b in protein chemical studies. DACM-labelled F0 was incorporated into liposomes and assayed for H+ translocating activity and its capacity to bind purified F1. Whereas the initial rate of H+ uptake was inhibited about 40% the reconstitution of a dicyclohexylcarbodiimide-sensitive F1F0 ATPase activity was completely unaffected. In a second set of experiments we reconstituted an F0 complex from DACM-labelled purified subunit b and an ac complex. In contrast to the results obtained with intact, DACM-labelled F0, both H+ translocating activity and F1 binding capacity were greatly reduced. Our data indicate that cysteine-21, probably together with other amino acids, is involved in maintaining a proper interaction of the hydrophobic N-terminal region of subunit b with the ac complex. This interplay seems to be a prerequisite for at least the in vitro assembly of a functional F0 complex.