Efficient mechanical disruption of Lactobacillus helveticus,Lactococcus lactis and Propionibacterium freudenreichii by a new high-pressure homogenizer and recovery of intracellular aminotransferase activity

Microbiological studies often involve bacterial cell fractionation, which is known to be difficult for Gram-positive as compared to Gram-negative bacteria. Our purpose was to test the breaking efficiency of a new high-pressure pilot homogenizer for three Gram-positive species involved in dairy technology and to assess the activity of an intracellular aminotransferase. Varied pressures (50, 100 and 200 MPa) were applied to concentrated bacterial suspensions (1.2 mg dry weight/ml) of Lactobacillus helveticus, Lactococcus lactis and Propionibacterium freudenreichii. Breaking efficiency was estimated by decreases in optical density at 650 nm, cellular dry weight and viability. The proteins released were quantified and the residual intracellular aminotransferase activity was estimated using leucine as substrate. One run at 50 MPa was sufficient to break 80% of lactobacilli cells whereas 200 MPa were required for the same efficiency for L. lactis and P. freudenreichii. Whatever the pressure, leucine aminotransferase activity was recovered in the supernatant after cell breaking. This new high-pressure pilot homogenizer can allow rapid (20 s/run), easy, continuous and highly efficient cell breaking for intracellular enzyme recovery or other purposes. As the species tested were not phylogenetically related, and had different morphologies and cell wall compositions, we conclude that most Gram-positive bacteria may be broken efficiently by this new device. Electronic Publication     

A fast and simple approach to optimize the unit operation high pressure homogenization - a case study for a soluble therapeutic protein in E. coli

Escherichia coli is one of the most commonly used host organisms for the production of recombinant biopharmaceuticals. E. coli is usually characterized by fast growth on cheap media and high productivity, but one drawback is its intracellular product formation. Product recovery from E. coli bioprocesses requires tedious downstream processing (DSP). A typical E. coli DSP for an intracellular product starts with a cell disruption step to access the product. Different methods exist, but a scalable process is usually achieved by high pressure homogenization (HPH). The protocols for HPH are often applied universally without adapting them to the recombinant product, even though HPH can affect product quantity and quality. Based on our previous study on cell disruption efficiency, we aimed at screening operational conditions to maximize not only product quantity, but also product quality of a soluble therapeutic protein expressed in E. coli. We screened for critical process parameters (CPPs) using a multivariate approach (design of experiments; DoE) during HPH to maximize product titer and achieve sufficient product quality, based on predefined critical quality attributes (CQAs). In this case study, we were able to gain valuable knowledge on the efficiency of HPH on E. coli cell disruption, product release and its impact on CQAs. Our results show that HPH is a key unit operation that has to be optimized for each product.     

Influence of broth dilution on the disruption of Escherichia coli

Summary The effect of cell concentration (5 to 150 g/L wet wt after broth dilution) on homogenizer disruption efficiency and homogenate viscosity is reported for E. coli. Broth dilution increases homogenizer efficiency and decreases feed and homogenate viscosity. However, this increase in disruption efficiency is not sufficient to warrant dilution of the broth prior to homogenization. The optimal feed concentration is the maximum possible that does not lead to practical handling difficulties due to high viscosity.     

Improvement of pCOR plasmid copy number for pharmaceutical applications

Production of pharmaceutical-grade plasmid DNA is becoming important as the demand for clinical batches is steadily growing. pCOR plasmids have been specifically designed and used for gene delivery into humans, and have been produced by high cell-density fermentation with a yield of 100 mg/l. This yield could probably be increased as long as the release specifications of bulk plasmid remain the same, particularly in terms of plasmid sequence. We report here the use of genetic approaches in Escherichia coli to increase the copy number of pCOR. The bacterial gene encoding the initiator-protein, which plays a pivotal role in pCOR replication, was mutagenized. A fluorescence-based screening methodology in E. coli was used to identify novel copy-up mutations. A particular combination of copy-up mutations translated into a 3–5-fold increase in monomer pCOR plasmid DNA per biomass unit.     

Intracellular Accumulation of the Monomeric Precursors of Polyphosphates and Polyhydroxyalkanoates in Acinetobacter calcoaceticusand Escherichia coliCells

The formation of polyhydroxyalkanoates granules in anaerobically grown Escherichia coliM-17 cells was found to be preceded by the intracellular accumulation of carbonic acids (predominantly, acetic acid), amounting to 9% of the cytosol. The intracellular concentration of acidic metabolites increased after the lyophilization of the bacterial biomass and decreased after its long-term storage (3.5–13.5 years). The decrease in the concentration of acidic metabolites is likely due to the dehydration of dimeric carbonic acids in the viscoelastic cytosol of resting bacterial cells. The hydrophobic obligately aerobic cells of Acinetobacter calcoaceticusIEGM 549 are able to utilize a wide range of growth substrates (from acetate and citrate to hydrophobic hydrocarbons), which is considerably wider than the range of the growth substrates of E. coli(predominantly, carbohydrates). The minimal essential and optimal concentrations of orthophosphates in the growth medium of A. calcoaceticuswere found to be tens of times lower than in the case of E. coli.The intracellular content of orthophosphates in A. calcoaceticuscells reached 35–77% of the total phosphorus content (P_total), providing for the intense synthesis of polyphosphates. The P_totalof the A. calcoaceticuscells grown in media with different proportions between the concentrations of acetate and phosphorus varied from 0.7 to 3.3%, averaging 2%. This value of P_totalis about two times higher than that observed for fermenting E. colicells. Lowering the cultivation temperature of A. calcoaceticusfrom 37–32 to 4°C augmented the accumulation of orthophosphates in the cytoplasm, presumably owing to a decreased requirement of growth processes for orthophosphate. In this case, if the concentration of phosphates in the cultivation medium was low, they were completely depleted.     

Biomass relationship to growth and phosphate uptake ofPseudomonas fluorescens,Escherichia coli andAcinetobacter radioresistens in mixed liquor medium

The ability ofPseudomonas fluorescens, Escherichia coli andAcinetobacter radioresistenns to remove phosphate during growth was related to the initial biomass as well as to growth stages and bacterial species. Phosphate was removed by these bacteria under favourable conditions as well as under unfavourable conditions of growth. Experiments showed a relationship between a high initial cell density and phosphate uptake. More phosphate was released than removed when low initial cell densities (10²–10⁵ cells ml^–1) were used. At a high initial biomass concentration (10⁸ cells ml^–1), phosphate was removed during the lag phase and during logarthmic growth byP. fluorescens. Escherichia coli. at high initial biomass concentrations (10⁷ cells ml^–1), accumulated most of the phosphate during the first hour of the lag phase and/or during logarithmic growth and in some cases removed a small quantily of phosphate during the stationary growth phase.Acinetobacter radioresistens, at high initial cell densities (10⁶, 10⁷ cells ml^–1) removed most of phosphate during the first hour of the lag phase and some phosphate during the stationary growth phase.Pseudomonas fluorescens removed phosphate more thanA. radioresistens andE. coli with specific average ranges from 3.00–28.50 mg L^–1 compared to average ranges of 4.92–17.14 mg L^–1 forA. radioresistens and to average ranges of 0.50–8.50 mg L^–1 forE. coli.     

Doublet preference and gene evolution

Summary Doublet preference analysis was carried out on coding and noncoding regions ofEscherichia coli, Saccharomyces cerevisiae, and human mitochondrial and nuclear DNA. The preference pattern in 1–2 and 2–3 doublets inE. coli andS. cerevisiae correlated with that in noncoding regions. The 3-1 doublet preference inE. coli genes with low optimal codon frequency and inS. cerevisiae genes also showed a correlation with each of their noncoding doublet preference. A mechanism to explain these double preference correlations in doublet preference is presented: mutational biases, the origin of the noncoding region doublet preference, evolved so as to maintain the 1–2 and 2–3 doublet preference, which is determined by codon usage. These biases then acted on the 3-1 doublet, which was almost free of coding constraints, resulting in a similar preference in this doublet.     

Investigation of Lysozyme–Antilysozyme Interactions in a Model Tetrahymena–EscherichiaCommunity

Lysozyme and antilysozyme activities present in a wide range of microorganisms determine the so-called lysozyme–antilysozyme system of hydrobionts, which greatly contribute to the formation of aquatic biocenoses. However, the mechanism of the functioning of this system in natural freshwater communities remains obscure. The experimental investigation of lysozyme–antilysozyme interactions in a model Tetrahymena–Escherichiacommunity showed that the antilysozyme activity of Escherichia colileads to incomplete phagocytosis, thus enhancing bacterial survival in a mixed culture with infusoria. The selection and reproduction of bacterial cells resistant to grazing by infusoria determine the character of host–parasite interactions and allow bacteria to survive. It was demonstrated that the antilysozyme activity of microorganisms, which is responsible for bacterial persistency in natural biocenoses, is involved in the maintenance of protozoa–bacteria communities in bodies of water.     

Purification of plasmid DNA using a multicompartment electrolyser separated by ultrafilter membranes

A simple, scalable method for purification of plasmid DNA is described. Plasmid DNA was released from Escherichia coli JM109 by lysis (1% SDS, 0.2 M NaOH). Then a neutralization solution (3 M sodium acetate buffer, pH 4.8) was added to precipitate genomic DNA and protein. After the clarification of the lysate, the supernatant was placed in a multicompartment electrolyser separated by ultrafilter membranes to remove the remaining contamination (RNA, genomic DNA and protein). A recovery of 75%±2% of total plasmid DNA was obtained after 60 min electrophoresis with a field strength of 8 V cm^–1 using cells at 30 g l^–1 (quantified by dry cell weight). Genomic DNA, RNA and protein were undetectable in the purified plasmid DNA solution.     

Comparative Study of the M.BstF5I-1 and M.BstF5I-3 DNA Methyltransferases from the Bacillus stearothermophilus F5 Restriction–Modification System

The BstF5I restriction–modification system from Bacillus stearothermophilus F5, unlike all known restriction–modification systems, contains three genes encoding DNA methyltransferases. In addition to revealing two DNA methylases responsible for modification of adenine in different DNA strands, it has been first shown that one bacterial cell has two DNA methylases, M.BstF5I-1 and M.BstF5I-3, with similar substrate specificity. The boundaries of the gene for DNA methyltransferase M.BstF5I-1 have been verified. The bstF5IM-1 gene was cloned in pJW and expressed in Escherichia coli. Homogeneous samples of M.BstF5I-1 and M.BstF5I-3 were obtained by chromatography with different sorbents. The main kinetic parameters have been determined for M.BstF5I-1 and M.BstF5I-3, both modifying adenine in the recognition site 5"-GGATG-3".     

Addressing a whole bioprocess in real-time using an optical biosensor-formation,recovery and purification of antibody fragments from a recombinant<Emphasis Type="Italic"> E. coli</Emphasis> host

The use of biosensor technology is described to address in real-time the production and subsequent purification of a bioactive recombinant protein product. The product, D1.3 Fv antibody fragment, was expressed in Escherichia coli and purified via two process routes, one for extracellular and one for intracellular product material. The cells were harvested by centrifugation in a solid bowl CARR Powerfuge and stored at –70°C. Clarification of the supernatant was performed by depth filtration, followed by affinity chromatography for final purification of the extracellular product. To purify the intracellular product the harvested cells were resuspended and homogenised. Removal of debris in the CARR Powerfuge was followed by depth filtration and affinity chromatography. In this work we have shown the rapid determination of bioactive product levels, and the impact this has on improved accountability and confidence is demonstrated in process mass balances on the product using the data acquired during process operation.     

Receptor-Mediated Transfer of DNA–Galactosylated Poly-L-lysine Complexes into Mammalian Cells in vitro and in vivo

With the goal of developing non-viral techniques for exogenous gene delivery into mammalian cells, we have studied receptor-mediated gene transfer using complexes of plasmid DNA and galactosylated poly-L-lysine, poly(L-Lys)Gal. To evaluate the optimal parameters for efficient gene transfer into human hepatoma HepG2 cells by the DNA–poly(L-Lys)Gal complexes, the bacterial reporter genes lacZ and cat were used. Examination of the reporter gene expression level showed that the efficiency of DNA delivery into the cells depends on the structure of DNA–poly(L-Lys)Gal complexes formed at various ionic strength values. The efficiency of DNA transfer into the cells also depends on DNA/poly(L-Lys)Gal molar ratio in the complexes. Plasmid vector carrying human apolipoprotein A-I (apoA-I) gene was injected as its complex with poly(L-Lys)Gal into rat tail vein. Some level of ApoA-I was detected in the serum of the injected rats. Also, the human apoA-I-containing plasmid was found to be captured specifically by the rat liver cells and transported into the cell nuclei, where it can persist as an episome-like structure for at least a week. After repeated injections of DNA–poly(L-Lys)Gal complexes, the level of human ApoA-I in rat serum increases, probably, due to accumulation of functional human apoA-I gene in the liver cell nuclei. The data seem to be useful for the development of non-viral approaches to gene therapy of cardiovascular diseases.     

Characterization of Escherichia coli DNA lesions generated within J774 macrophages

Macrophages are armed with multiple oxygen-dependent and -independent bactericidal properties. However, the respiratory burst, generating reactive oxygen species, is believed to be a major cause of bacterial killing. We exploited the susceptibility of Escherichia coli in macrophages to characterize the effects of the respiratory burst on intracellular bacteria. We show that E. coli strains recovered from J774 macrophages exhibit high rates of mutations. We report that the DNA damage generated inside macrophages includes DNA strand breaks and the modification 8-oxo-2′-deoxyguanosine, which are typical oxidative lesions. Interestingly, we found that under these conditions, early in the infection the majority of E. coli cells are viable but gene expression is inhibited. Our findings demonstrate that macrophages can cause severe DNA damage to intracellular bacteria. Our results also suggest that protection against the macrophage-induced DNA damage is an important component of the bacterial defense mechanism within macrophages.     

Active,soluble recombinant melittin purified by extracting insoluble lysate of Escherichia coli without denaturation

Cell lytic peptides are a class of drugs that can be used to selectively kill invading organisms or diseased cells. Several of these peptides have been identified as potential therapeutics. Herein, we report a novel process for purifying recombinant melittin, a cell lytic peptide that inserts into the membranes of cells causing cell lysis, from Escherichia coli. The process involves surfactant and low pH to solubilize melittin fusion proteins from the insoluble fraction of bacterial lysates. We are able to significantly improve purity of the final product and confirm the activity of the peptide. The process yields recombinant melittin that is effective when used to treat U‐87 MG glioma cells and inhibits growth of the gram‐positive pathogenic bacterium Streptococcus pyogenes. We demonstrate a method of repeated extraction of the insoluble protein fraction with mild detergent at a low pH that is able to generate a yield of pure, soluble melittin of ～0.5–1 mg/L of E. coli culture. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1150–1157, 2013     

DNA amplification fingerprinting of bacteria

Summary We have amplified short arbitrary stretches of total bacterial DNA to produce highly characteristic and complex DNA fingerprints. This DNA amplification fingerprinting (DAF) strategy involves enzymatic amplification of DNA directed by a single arbitrary oligonucleotide primer. Amplification produces a characteristic spectrum of products that is adequately resolved by polyacrylamide gel electrophoresis and visualized by silver staining. Although DAF is simple in concept, we found that amplification parameters must be within an optimal range for reproducibility. We establish a safe window for these parameters, which include magnesium, primer and enzyme concentration as well as cycle number. The refined procedure was used to distinguish between clinical isolates of Streptococcus uberis, Klebsiella pneumoniae, and Escherichia coli. The use of template DNA concentrations higher than 1 ng·l^–1 and high MgCl₂ levels was especially important for reproductibility when amplifying small bacterial genomes. We tested a truncated Thermus aquaticus DNA polymerase, the Stoffel fragment, and found it more tolerant of reaction conditions, more efficient in the amplification of short products, and able to produce more informative fingerprints when compared to the normal thermostable polymerase from which it was derived. Because DAF produces representative fingerprints quickly and reliably from bacteria regardless of prior genetic or biochemical knowledge, we anticipate the general use of this diagnostic tool for bacterial identification and taxonomy.Correspondence to: G. Caetano-Anollés     

Depletion of reactive oxygen species induced by chlorogenic acid triggers apoptosis-like death in Escherichia coli

Chlorogenic acid (CGA) is a phenolic compound with various health-promoting properties, including antioxidant effects and a wide range of antibacterial activities. However, the antibacterial mechanism remains unclear. We investigated the underlying mode of action of CGA against Escherichia coli, which shows bacterial apoptosis-like death. Cells treated with CGA showed apoptotic features such as membrane depolarisation, caspase-like protein expression, increased intracellular Ca²⁺ levels, phosphatidylserine externalisation, and DNA fragmentation. In contrast to common bacterial apoptosis-like death, which is caused by reactive oxygen species (ROS) accumulation, CGA depleted intracellular ROS. Because ROS are important intracellular signalling molecules, and ROS depletion may affect bacterial intracellular signalling pathways, leading to cell death. To determine whether deficiencies in intracellular ROS cause apoptosis-like death, the cells were treated with H₂O₂ after CGA treatment. H₂O₂ restored depleted intracellular ROS levels to similar levels as in untreated cells, and cell viability was increased compared to CGA-treated cells. Moreover, apoptotic features were attenuated in H₂O₂ post-treated cells. These results demonstrate that CGA induces bacterial apoptosis in E. coli and intracellular ROS depletion is a core regulator in the progression of bacterial apoptosis-like death.     

The FI gene product of bacterial virus Lambda is related to theE. coli chromosomal protein NS2 and is involved in intracellular DNA organization

A likely function of the Lambda FI gene product (gpFI) is condensation of developmental forms of the bacteriophage DNA in the host cell. Several characteristics of gpFI support this hypothesis: it is similar in its structure and properties toE. coli NS proteins whose involvement in the bacterial DNA condensation has been established and it comigrates with DNA during fractionation of host cell lysate through a sucrose gradient.     

Bacterial and archaeal flagella as prokaryotic motility organelles

The properties and molecular organization of flagella—the bacterial and archaeal motility organelles—are reviewed. The organization of these functional motility elements of prokaryotic organisms belonging to different kingdoms is compared. A mechanism for both in vivo and in vitro assembly of bacterial flagellum filaments (BFFs) is discussed, and similarity is supposed between flagellin and actin with regard to their polymeric forms (BFF and F-actin). Our own data on intracellular fixation of the Halobacterium salinarium flagellum are presented. Comparative characteristics of intracellular fixation of bacterial and archaeal flagella are also described.Translated from Biokhimiya, Vol. 69, No. 11, 2004, pp. 1477–1488.Original Russian Text Copyright © 2004 by Metlina.     

Quantitation of plasmid DNA in aqueous two-phase systems by fluorescence analysis

The development of aqueous two-phase systems for plasmid purification from Escherichia coli cell lysates requires a reliable DNA quantitation method. Plasmid DNA was quantified by fluorescence using PicoGreen nucleic acid stain. Linearity was obtained up to 40 ng plasmid ml^–1. Two polyethyleneglycol (PEG)/salt systems were studied, PEG 600/K₂HPO₄ and PEG 300/K₂HPO₄. The average plasmid recovery was 41% in the bottom phase of the first system and 35% in the top phase of the second system. This method has proved to be simple and reproducible.     

Expression of the recA gene of Escherichia coli in several species of gram-negative bacteria

Summary A broad host range plasmid containing an operon fusion between the recA and lacZ genes of Escherichia coli was introduced into various aerobic and facultative gram-negative bacteria — 30 species belonging to 20 different genera — to study the expression of the recA gene after DNA damage. These included species of the families Enterobacteriaceae, Pseudomonadaceae, Rhizobiaceae, Vibrionaceae, Neisseriaceae, Rhodospirillaceae and Azotobacteraceae. Results obtained show that all bacteria tested, except Xanthomonas campestris and those of the genus Rhodobacter, are able to repress and induce the recA gene of E. coli in the absence and in the presence of DNA damage, respectively. All these data indicate that the SOS system is present in bacterial species of several families and that the LexA-binding site must be very conserved in them.