Nucleic acid-dependent cross-linking of the nucleocapsid protein of Sindbis virus

The assembly of the alphavirus nucleocapsid core is a multistep event requiring the association of the nucleocapsid protein with nucleic acid and the subsequent oligomerization of capsid proteins into an assembled core particle. Although the mechanism of assembly has been investigated extensively both in vivo and in vitro, no intermediates in the core assembly pathway have been identified. Through the use of both truncated and mutant Sindbis virus nucleocapsid proteins and a variety of cross-linking reagents, a possible nucleic acid-protein assembly intermediate has been detected. The cross-linked species, a covalent dimer, has been detected only in the presence of nucleic acid and with capsid proteins capable of binding nucleic acid. Optimum nucleic acid-dependent cross-linking was seen at a protein-to-nucleic-acid ratio identical to that required for maximum binding of the capsid protein to nucleic acid. Identical results were observed when cross-linking in vitro assembled core particles of both Sindbis and Ross River viruses. Purified cross-linked dimers of truncated proteins and of mutant proteins that failed to assemble were found to incorporate into assembled core particles when present as minor components in assembly reactions, suggesting that the cross-linking traps an authentic intermediate in nucleocapsid core assembly. Endoproteinase Lys-C mapping of the position of the cross-link indicated that lysine 250 of one capsid protein was cross-linked to lysine 250 of an adjacent capsid protein. Examination of the position of the cross-link in relation to the existing model of the nucleocapsid core suggests that the cross-linked species is a cross-capsomere contact between a pentamer and hexamer at the quasi-threefold axis or is a cross-capsomere contact between hexamers at the threefold axis of the icosahedral core particle and suggests several possible assembly models involving a nucleic acid-bound dimer of capsid protein as an early step in the assembly pathway.     

In Vitro Assembly of Alphavirus Cores by Using Nucleocapsid Protein Expressed in Escherichia coli

The production of the alphavirus virion is a multistep event requiring the assembly of the nucleocapsid core in the cytoplasm and the maturation of the glycoproteins in the endoplasmic reticulum and the Golgi apparatus. These components associate during the budding process to produce the mature virion. The nucleocapsid proteins of Sindbis virus and Ross River virus have been produced in a T7-based Escherichia coli expression system and purified. In the presence of single-stranded but not double-stranded nucleic acid, the proteins oligomerize in vitro into core-like particles which resemble the native viral nucleocapsid cores. Despite their similarities, Sindbis virus and Ross River virus capsid proteins do not form mixed core-like particles. Truncated forms of the Sindbis capsid protein were used to establish amino acid requirements for assembly. A capsid protein starting at residue 19 [CP(19-264)] was fully competent for in vitro assembly, whereas proteins with further N-terminal truncations could not support assembly. However, a capsid protein starting at residue 32 or 81 was able to incorporate into particles in the presence of CP(19-264) or could inhibit assembly if its molar ratio relative to CP(19-264) was greater than 1:1. This system provides a basis for the molecular dissection of alphavirus core assembly.     

Alphavirus capsid protein helix I controls a checkpoint in nucleocapsid core assembly

The assembly of the alphavirus nucleocapsid core has been investigated using an in vitro assembly system. The C-terminal two-thirds of capsid protein (CP), residues 81 to 264 in Sindbis virus (SINV), have been previously shown to have all the RNA-CP and CP-CP contacts required for core assembly in vitro. Helix I, which is located in the N-terminal dispensable region of the CP, has been proposed to stabilize the core by forming a coiled coil in the CP dimer formed by the interaction of residues 81 to 264. We examined the ability of heterologous alphavirus CPs to dimerize and form phenotypically mixed core-like particles (CLPs) using an in vitro assembly system. The CPs of SINV and Ross River virus (RRV) do not form phenotypically mixed CLPs, but SINV and Western equine encephalitis virus CPs do form mixed cores. In addition, CP dimers do not form between SINV and RRV in these assembly reactions. In contrast, an N-terminal truncated SINV CP (residues 81 to 264) forms phenotypically mixed CLPs when it is assembled with full-length heterologous CPs, suggesting that the region that controls the mixing is present in the N-terminal 80 residues. Furthermore, this result suggests that the dimeric interaction, which was absent between SINV and RRV CPs, can be restored by the removal of the N-terminal 80 residues of the SINV CP. We mapped the determinant that is responsible for phenotypic mixing onto helix I by using domain swapping experiments. Thus, discrimination of the CP partner in alphavirus core assembly appears to be dependent on helix I sequence compatibility. These results suggest that helix I provides one of the important interactions during nucleocapsid core formation and may play a regulatory role during the early steps of the assembly process.     

In vitro-assembled alphavirus core-like particles maintain a structure similar to that of nucleocapsid cores in mature virus

In vitro-assembled core-like particles produced from alphavirus capsid protein and nucleic acid were studied by cryoelectron microscopy. These particles were found to have a diameter of 420 A with 240 copies of the capsid protein arranged in a T=4 icosahedral surface lattice, similar to the nucleocapsid core in mature virions. However, when the particles were subjected to gentle purification procedures, they were damaged, preventing generation of reliable structural information. Similarly, purified nucleocapsid cores isolated from virus-infected cells or from mature virus particles were also of poor quality. This suggested that in the absence of membrane and glycoproteins, nucleocapsid core particles are fragile, lacking accurate icosahedral symmetry.     

Structural interactions between retroviral Gag proteins examined by cysteine cross-linking.

We have examined structural interactions between Gag proteins within Moloney murine leukemia virus (M-MuLV) particles by making use of the cysteine-specific cross-linking agents iodine and bis-maleimido hexane. Virion-associated wild-type M-MuLV Pr65Gag proteins in immature particles were intermolecularly cross-linked at cysteines to form Pr65Gag oligomers, from dimers to pentamers or hexamers. Following a systematic approach of cysteine-to-serine mutagenesis, we have shown that cross-linking of Pr65Gag occurred at cysteines of the nucleocapsid (NC) Cys-His motif, suggesting that the Cys-His motifs within virus particles are packed in close proximity. The M-MuLV Pr65Gag protein did not cross-link to the human immunodeficiency virus Pr55Gag protein when the two molecules were coexpressed, indicating either that they did not coassemble or that heterologous Gag proteins were not in close enough proximity to be cross-linked. Using an assembly-competent, protease-minus, cysteine-minus Pr65Gag protein as a template, novel cysteine residues were generated in the M-MuLV capsid domain major homology region (MHR). Cross-linking of proteins containing MHR cysteines showed above-background levels of Gag-Gag dimers but also identified a novel cellular factor, present in virions, that cross-linked to MHR residues. Although the NC cysteine mutation was compatible with M-MuLV particle assembly, deletions of the NC domain were not tolerated. These results suggest that the Cys-His motif is held in close proximity within immature M-MuLV particles by interactions between CA domains and/or non-Cys-His motif domains of the NC.     

Structural analysis of human immunodeficiency virus type 1 Gag protein interactions, using cysteine-specific reagents.

We have examined structural interactions of Gag proteins in human immunodeficiency virus type 1 (HIV-1) particles by utilizing cysteine mutagenesis and cysteine-specific modifying reagents. In immature protease-minus but otherwise wild-type (wt) particles, precursor Pr55Gag proteins did not form intermolecular cystines naturally but could be cross-linked at cysteines, and cross-linking appeared to occur across nucleocapsid (NC) domains. Capsid (CA) proteins in wt mature viruses possess cysteines near their carboxy termini at gag codons 330 and 350, but these residues are not involved in natural covalent intermolecular bonds, nor can they be intermolecularly cross-linked by using the membrane-permeable cross-linker bis-maleimido hexane. The cysteine at gag codon 350 (C-350) is highly reactive to thiol-specific modifying reagents, while the one at codon 330 (C-330) appears considerably less reactive, even in the presence of ionic detergent. These results suggest that the HIV-1 CA C terminus forms an unusually stable conformation. Mutagenesis of C-350 to a serine residue in the mutant C350S (C-350 changed to serine) virtually eliminated particle assembly, attesting to the importance of this region. We also examined a C330S mutant, as well as mutants in which cysteines were created midway through the capsid domain or in the C-terminal section of the major homology region. All such mutants appeared wt on the basis of biochemical assays but showed greatly reduced infectivities, indicative of a postassembly, postprocessing replicative block. Interestingly, capsid proteins of mature major homology region mutant particles could be cysteine cross-linked, implying either that these mutations permit cross-linking of the native C-terminal CA cysteines or that major homology regions on neighbor capsid proteins are in close proximity in mature virions.     

The role of subunit hinges and molecular "switches" in the control of viral capsid polymorphism

The coat protein (CP) of cowpea chlorotic mottle virus assembles exclusively into a T=3 capsid in vivo and, under proper conditions, in vitro. The N-terminal domain of CP has been implicated in proper assembly and was viewed as a required switch for mediating hexamer and pentamer formation in T=3 assembly. We observed that a mutant CP lacking most of the N-terminal domain, NDelta34, assembles, in vitro, into statistically predictable numbers of: native-like T=3 capsids of 90 dimers; "T=2" capsids of 60 dimers; T=1 capsids of 30 dimers. We generated cryo-EM image reconstructions of each form and built pseudo-atomic models based on the subunits from the crystal structure of plant-derived T=3 virus allowing a detailed comparison of stabilizing interactions in the three assemblies. The statistical nature of the distribution of assembly products and the observed structures indicates that the N-terminus of CP is not a switch that is required to form the proper ratio of hexamers and pentamers for T=3 assembly; rather, it biases the direction of assembly to T=3 particles from the possibilities available to NDelta34 through flexible dimer hinges and variations in subunit contacts. Our results are consistent with a pentamer of dimers (PODs) nucleating assembly in all cases but subunit dimers can be added with different trajectories that favor specific T=3 or T=1 global particle geometries. Formation of the "T=2" particles appears to be fundamentally different in that they not only nucleate with PODs, but assembly propagates by the addition of mostly, if not exclusively PODs generating an entirely new subunit interface in the process. These results show that capsid geometry is flexible and may readily adapt to new requirements as the virus evolves.     

Interactions of the cytoplasmic domain of Sindbis virus E2 with nucleocapsid cores promote alphavirus budding

Alphavirus budding from the plasma membrane occurs through the specific interaction of the nucleocapsid core with the cytoplasmic domain of the E2 glycoprotein (cdE2). Structural studies of the Sindbis virus capsid protein (CP) have suggested that these critical interactions are mediated by the binding of cdE2 into a hydrophobic pocket in the CP. Several molecular genetic studies have implicated amino acids Y400 and L402 in cdE2 as important for the budding of alphaviruses. In this study, we characterized the role of cdE2 residues in structural polyprotein processing, glycoprotein transport, and capsid interactions. Along with hydrophobic residues, charged residues in the N terminus of cdE2 were critical for the effective interaction of cores with cdE2, a process required for virus budding. Mutations in the C-terminal signal sequence region of cdE2 affected E2 protein transport to the plasma membrane, while nonbudding mutants that were defective in cdE2-CP interaction accumulated E2 on the plasma membrane. The interaction of cdE2 with cytoplasmic cores purified from infected cells and in vitro-assembled core-like particles suggests that cdE2 interacts with assembled cores to mediate budding. We hypothesize that these cdE2 interactions induce a change in the organization of the nucleocapsid core upon binding leading to particle budding and priming of the nucleocapsid cores for disassembly that is required for virus infection.     

Structural aspects of M? muscarinic acetylcholine receptor dimer formation and activation

To explore the structural mechanisms underlying the assembly and activation of family A GPCR dimers, we used the rat M(3) muscarinic acetylcholine receptor (M3R) as a model system. Studies with Cys-substituted mutant M3Rs expressed in COS-7 cells led to the identification of several mutant M3Rs that exclusively existed as cross-linked dimers under oxidizing conditions. The cross-linked residues were located at the bottom of transmembrane domain 5 (TM5) and within the N-terminal portion of the third intracellular loop (i3 loop). Studies with urea-stripped membranes demonstrated that M3R disulfide cross-linking did not require the presence of heterotrimeric G proteins. Molecular modeling studies indicated that the cross-linking data were in excellent agreement with the existence of a low-energy M3R dimer characterized by a TM5-TM5 interface. [(35)S]GTPγS binding/Gα(q/11) immunoprecipitation assays revealed that an M3R dimer that was cross-linked within the N-terminal portion of the i3 loop (264C) was functionally severely impaired (～50% reduction in receptor-G-protein coupling, as compared to control M3R). These data support the novel concept that agonist-induced activation of M3R dimers requires a conformational change of the N-terminal segment of the i3 loop. Given the high degree of structural homology among family A GPCRs, these findings should be of broad significance.     

Analysis of human immunodeficiency virus type 1 Gag dimerization-induced assembly

The nucleocapsid (NC) domains of retrovirus precursor Gag (PrGag) proteins play an essential role in virus assembly. Evidence suggests that NC binding to viral RNA promotes dimerization of PrGag capsid (CA) domains, which triggers assembly of CA N-terminal domains (NTDs) into hexamer rings that are interconnected by CA C-terminal domains. To examine the influence of dimerization on human immunodeficiency virus type 1 (HIV-1) Gag protein assembly in vitro, we analyzed the assembly properties of Gag proteins in which NC domains were replaced with cysteine residues that could be linked via chemical treatment. In accordance with the model that Gag protein pairing triggers assembly, we found that cysteine cross-linking or oxidation reagents induced the assembly of virus-like particles. However, efficient assembly also was observed to be temperature dependent or required the tethering of NTDs. Our results suggest a multistep pathway for HIV-1 Gag protein assembly. In the first step, Gag protein pairing through NC-RNA interactions or C-terminal cysteine linkage fosters dimerization. Next, a conformational change converts assembly-restricted dimers or small oligomers into assembly-competent ones. At the final stage, final particle assembly occurs, possibly through a set of larger intermediates.     

Effect of nucleocapsid on multimerization of <Emphasis Type="Italic">gypsy</Emphasis> structural protein GAG

The structural protein (Gag) of Drosophila retrovirus gypsy contains capsid and nucleocapsid domains. Gag forms virus-like particles in a bacterial cell; furthermore, its capsid alone is able to form aggregates. However, aggregates assembled from the capsid vary in size and are less organized than particles formed by a full-length Gag. The nucleocapsid determines the organization and structure of the particles, which is ensured by the amino acid residues at its N-terminal (a nucleocapsid proximal part). The assembly of the particle occurs in the presence of any RNAs or single-stranded DNA oligonucleotides.     

A protease-sensitive hinge linking the two domains of the hepatitis B virus core protein is exposed on the viral capsid surface.

Core particles of hepatitis B virus are assembled from dimers of a single 185-residue (subtype adw) viral capsid or core protein (p21.5) which possesses two distinct domains: residues 1 to 144 form a minimal capsid assembly domain, and the arginine-rich, carboxyl-terminal residues 150 to 185 form a protamine-like domain that mediates nucleic acid binding. Little is known about the topography of the p21.5 polypeptide within either the p21.5 capsids or dimers. Here, using site-specific proteases and monoclonal antibodies, we have defined the accessibility of p21.5 residues in dimers and capsids assembled from wild-type and mutant hepatitis B virus core proteins in Xenopus oocytes and in vitro. The data reveal the protamine region to be accessible to external reagents in p21.5 dimers but largely cryptic in wild-type capsids. Strikingly, in capsids the only protease target region was a 9-residue peptide covering p21.5 residues Glu-145 to Asp-153, which falls largely between the two core protein domains. By analogy with protease-sensitive interdomain regions in other proteins, we propose that this peptide constitutes a hinge between the assembly and nucleic acid binding domains of p21.5. We further found that deletion or replacement of the terminal Cys-185 residue greatly increased surface exposure of the protamine tails in capsids, suggesting that a known disulfide linkage involving this residue tethers the protamine region inside the core particles. We propose that disruption of this disulfide linkage allows the protamine region to appear transiently on the surface of the core particle.     

Form-determining functions in Sindbis virus nucleocapsids: nucleosomelike organization of the nucleocapsid.

Purified intact Sindbis virus nucleocapsids were treated at different pH values or with various concentrations of divalent cations, cation chelators, salt, or formamide. The resulting structures were examined by velocity sedimentation, electron microscopy, and protein-protein cross-linking. Changes in each of the test conditions led to alterations in the sedimentation profile of treated nucleocapsids. Appropriate concentrations of formamide or divalent cations generated beaded strandlike structures similar in morphology to those generated from adenovirus cores and nucleosomes. The capsid protein and RNA remained associated with each other at NaCl concentrations less than or equal to 1 M or after treatment of the structures with alkaline pH up to and including pH 10.7. Protein and RNA were dissociated by salt concentrations of greater than 1 M, suggesting that the arginine-rich, amino-terminal portion of the capsid protein is responsible for binding the RNA. Protein-protein cross-linking also indicated that the capsid proteins remained associated in small aggregates under some of the conditions that caused dissociation of the nucleocapsid and suggested the presence of more than one type of protein-protein interaction in the nucleocapsids. Collectively, these data suggest that, like histones and adenovirus core proteins, the Sindbis virus capsid protein serves to package segments of the genome into nucleoprotein beads which are capable of interacting with each other to form the nucleocapsid structure.     

A micromolar pool of antigenically distinct precursors is required to initiate cooperative assembly of hepatitis B virus capsids in Xenopus oocytes.

Assembly of hepatitis B virus capsid-like (core) particles occurs efficiently in a variety of heterologous systems via aggregation of approximately 180 molecules of a single 21.5-kDa core protein (p21.5), resulting in an icosahedral capsid structure with T = 3 symmetry. Recent studies on the assembly of hepatitis B virus core particles in Xenopus oocytes suggested that dimers of p21.5 represent the major building block from which capsids are generated. Here we determined the concentration dependence of this assembly process. By injecting serially diluted synthetic p21.5 mRNA into Xenopus oocytes, we expressed different levels of intracellular p21.5 and monitored the production of p21.5 dimers and capsids by radiolabeling and immunoprecipitation, by radioimmunoassay, or by quantitative enzyme-linked immunosorbent assay analysis. The data revealed that (i) p21.5 dimers and capsids are antigenically distinct, (ii) capsid assembly is a highly cooperative and concentration-dependent process, and (iii) p21.5 must accumulate to a signature concentration of approximately 0.7 to 0.8 microM before capsid assembly initiates. This assembly process is strikingly similar to the assembly of RNA bacteriophage R17 as defined by in vitro studies.     

Structure of the tubulin dimer

Microtubules are formed from a 110,000-dalton dimeric subunit called tubulin. Two forms of 55,000-dalton monomer, alpha and beta, are found in all microtubule preparations. The dimers could thus theoretically be either heterodimers (alphabeta) or homodimers (alphaalpha and betabeta). This problem was investigated by stigated by chemical cross-linking using several bifunctional reagents, of which one, dimethyl-3,3-(tetrame thylenedioxy) dipropionimidate dihydrochloride (DTDI), was able to make intradimer bonds in tubulin. When soluble chick brain tubulin was cross-linked with DTDI and analyzed by electrophoresis in an acrylamide gel system capable of resolving alphaalpha, alphabeta, and betabeta, 60 to 90% of the cross-linked dimer was alphabeta. If tubulin was incubated at 24 degrees prior to cross-linking with DTDI the total yield of cross-linked dimer increased with time, indicating that tubulin was forming loose aggregates. The relative amounts of cross-linked dimer alphaalpha and betabeta also increase with time, indicating that soluble tubulin is largely alphabeta, and suggesting that cross-linked alphaalpha and betabeta arise from nonspecific aggregation during tubulin purification. The aggregation observed by cross-linking with DTDI was strongly influenced by colchicine and Vinca alkaloids in a pattern similar to the effects of these drugs on tubulin polymerization.     

Hepatitis B virus nucleocapsid assembly: primary structure requirements in the core protein.

As a step toward understanding the assembly of the hepatitis B virus (HBV) nucleocapsid at a molecular level, we sought to define the primary sequence requirements for assembly of the HBV core protein. This protein can self assemble upon expression in Escherichia coli. Applying this system to a series of C-terminally truncated core protein variants, we mapped the C-terminal limit for assembly to the region between amino acid residues 139 and 144. The size of this domain agrees well with the minimum length of RNA virus capsid proteins that fold into an eight-stranded beta-barrel structure. The entire Arg-rich C-terminal domain of the HBV core protein is not necessary for assembly. However, the nucleic acid content of particles formed by assembly-competent core protein variants correlates with the presence or absence of this region, as does particle stability. The nucleic acid found in the particles is RNA, between about 100 to some 3,000 nucleotides in length. In particles formed by the full-length protein, the core protein mRNA appears to be enriched over other, cellular RNAs. These data indicate that protein-protein interactions provided by the core protein domain from the N terminus to the region around amino acid 144 are the major factor in HBV capsid assembly, which proceeds without the need for substantial amounts of nucleic acid. The presence of the basic C terminus, however, greatly enhances encapsidation of nucleic acid and appears to make an important contribution to capsid stability via protein-nucleic acid interactions. The observation of low but detectable levels of nucleic acid in particles formed by core protein variants lacking the Arg-rich C terminus suggests the presence of a second nucleic acid-binding motif in the first 144 amino acids of the core protein. Based on these findings, the potential importance of the C-terminal core protein region during assembly in vivo into authentic, replication-competent nucleocapsids is discussed.     

Nucleic acid binding-induced Gag dimerization in the assembly of Rous sarcoma virus particles in vitro

As also found for other retroviruses, the Rous sarcoma virus structural protein Gag is necessary and sufficient for formation of virus-like particles (VLPs). Purified polypeptide fragments comprising most of Gag spontaneously assemble in vitro at pH 6.5 into VLPs lacking a membrane, a process that requires nucleic acid. We showed previously that the minimum length of a DNA oligonucleotide that can support efficient assembly is 16 nucleotides (nt), twice the protein's binding site size. This observation suggests that the essential role of nucleic acid in assembly is to promote the formation of Gag dimers. In order to gain further insight into the role of dimerization, we have studied the assembly properties of two proteins, a nearly full-length Gag (deltaMBDdeltaPR) capable of proper in vitro assembly and a smaller Gag fragment (CTD-NC) capable of forming only irregular aggregates but with the same pH and oligonucleotide length requirements as for assembly with the larger protein. In analyses by sedimentation velocity and by cross-linking, both proteins remained monomeric in the absence of oligonucleotides or in the presence of an oligonucleotide of length 8 nt (GT8). At pH 8, which does not support assembly, binding to GT16 induced the formation of dimers of deltaMBDdeltaPR but not of CTD-NC, implying that dimerization requires the N-terminal domain of the capsid moiety of Gag. Assembly of VLPs was induced by shifting the pH of dimeric complexes of deltaMBDdeltaPR and GT16 from 8 to 6.5. An analogue of GT16 with a ribonucleotide linkage in the middle also supported dimer formation at pH 8. Even after quantitative cleavage of the oligonucleotide by treatment of the complex with RNase, these dimers could be triggered to undergo assembly by pH change. This result implies that protein-protein interactions stabilize the dimer. We propose that binding of two adjacent Gag molecules on a stretch of nucleic acid leads to protein-protein interactions that create a Gag dimer and that this species has an exposed surface not present in monomers which allows polymerization of the dimers into a spherical shell.     

Architecture and Assembly of HIV Integrase Multimers in the Absence of DNA Substrates

We have applied small angle x-ray scattering and protein cross-linking coupled with mass spectrometry to determine the architectures of full-length HIV integrase (IN) dimers in solution. By blocking interactions that stabilize either a core-core domain interface or N-terminal domain intermolecular contacts, we show that full-length HIV IN can form two dimer types. One is an expected dimer, characterized by interactions between two catalytic core domains. The other dimer is stabilized by interactions of the N-terminal domain of one monomer with the C-terminal domain and catalytic core domain of the second monomer as well as direct interactions between the two C-terminal domains. This organization is similar to the “reaching dimer” previously described for wild type ASV apoIN and resembles the inner, substrate binding dimer in the crystal structure of the PFV intasome. Results from our small angle x-ray scattering and modeling studies indicate that in the absence of its DNA substrate, the HIV IN tetramer assembles as two stacked reaching dimers that are stabilized by core-core interactions. These models of full-length HIV IN provide new insight into multimer assembly and suggest additional approaches for enzyme inhibition.     

The formation of a disulfide cross-link between the two subunits demonstrates the dimeric structure of the mitochondrial oxoglutarate carrier

Isolated oxoglutarate carrier (OGC) can be cross-linked to dimers by disulfide-forming reagents such as Cu²⁺-phenanthroline and diamide. Acetone and other solvents increase the extent of Cu²⁺-phenanthroline-induced cross-linking of OGC. Cross-linked OGC re-incorporated in photeoliposomes fully retains the oxoglutarate transport activity. The amount of cross-linked OGC calculated by densitometry of scanned gels depends on the method of staining, since cross-linked OGC exhibits a higher sensitivity to Coomassie brilliant blue as compared to silver nitrate. Under optimal conditions the formation of cross-linked OGC dimer (stained with Coomassie brilliant blue) amounts to 75% of the total protein. Approximately the same cross-linking efficiency was evaluated from Western blots. Cross-linking of OGC is prevented by SH reagents and reversed by SH-reducing reagents, which shows that it is mediated by disulfide bridge(s). The formation of SS bridge(s) requires the native state of the protein, since it is suppressed by SDS and by heating. Furthermore, the extent of cross-linking is independent of OGC concentration indicating that disulfide bridge(s) must be formed between the two subunits of native dimers. The number and localization of disulfide bridge(s) in the cross-linked OGC were examined by peptide fragmentation and subsequent cleavage of disulfide bond(s) by β-mercaptoethanol. Our experimental results show that cross-linking of OGC is accomplished by a single disulfide bond between the cysteines 184 of the two subunits and suggest that these residues in the putative transmembrane helix four are fairly close to the twofold axis of the native dimer structure.     

Using Ion Mobility Spectrometry–Mass Spectrometry to Decipher the Conformational and Assembly Characteristics of the Hepatitis B Capsid Protein

The structural and functional analysis of the core protein of hepatitis B virus is important for a full understanding of the viral life cycle and the development of novel therapeutic agents. The majority of the core protein (CP149) comprises the capsid assembly domain, and the C-terminal region (residues 150–183) is responsible for nucleic acid binding. Protein monomers associate to form dimeric structural subunits, and helices 3 and 4 (residues 50–111 of the assembly domain) have been shown to be important for this as they constitute the interdimer interface. Here, using mass spectrometry coupled with ion mobility spectrometry, we demonstrate the conformational flexibility of the CP149 dimer. Limited proteolysis was used to locate involvement in this feature to the C-terminal region. A genetically fused CP dimer was found to show decreased disorder, consistent with a more restricted C-terminus at the fusion junction. Incubation of CP149 dimer with heteroaryldihydropyrimidine-1, a small molecule known to interfere with the assembly process, was shown to result in oligomers different in shape to the capsid assembly-competent oligomers of the fused CP dimer. We suggest that heteroaryldihydropyrimidine-1 affects the dynamics of CP149 dimer in solution, likely affecting the ratio between assembly active and inactive states. Therefore, assembly of the less dynamic fused dimer is less readily misdirected by heteroaryldihydropyrimidine-1. These studies of the flexibility and oligomerization properties of hepatitis B virus core protein illustrate both the importance of C-terminal dynamics in function and the utility of gas-phase techniques for structural and dynamical biomolecular analysis.