Comparative characterization of direct and indirect substrate probes for on-chip transamidating activity assay of transglutaminases

The development of molecular probes is a prerequisite for activity-based protein profiling. This strategy helps in characterizing the catalytic activity and function of proteins, and how these proteins and protein complexes control biological processes of interest. These probes are composed of a reactive functional group and a reporter tag. The reactive group of these substrate probes has been considered to be important to their design, while the significance of the reporter tag is relatively underestimated. In this study we compare TAMRA-cadaverine and biotin-cadaverine, two substrate probes that have different reporter tags but an identical reactive functional group. We assess the on-chip transamidating activity of two transglutaminases; transglutaminase 2 and blood coagulation factor XIII. Activity assays were more easily executed when using the direct probe TAMRA-cadaverine. However the indirect probe, biotin-cadaverine, provided a wider dynamic range, higher signal-to-noise ratio, and lower limit of detection compared to TAMRA-cadaverine. Additionally, we successfully used the on-chip activity assay using the indirect probe to determine TG2 and FXIII activities in Hela cell lysates and human plasma samples, respectively. These results demonstrate that the reporter tag of the substrate probe is critical for protocol execution, sensitivity, and dynamic range of enzyme activity assays. Furthermore, this study provides a helpful guide for development of new probes, which is necessary for the identification of potential biomarkers and therapeutic targets for treating enzyme-related diseases.     

Independent chromosomal localization of two different size 5S rDNA of Allium victorialis var. platyphyllum by sequential fluorescence in situ hybridization in accordance with sequence polymorphism

5S rRNA gene repeat units in a species are usually organized as either one relatively close size with numbers of intraspecific variations in NTS region or two different sizes with completely different sequence in NTS. Allium victorialis var. platyphyllum revealed two different size products of approximately 0.39 kb and 0.51 kb with highly conserved coding region of 120 bp. However, an extra sequences of approximately 120 bp between at 324 and 443 bp in long NTS region revealed, besides the remaining sequences of two NTS regions of short and long size were highly conserved giving the identity of 94.9%. To identify whether two different size 5S rDNA are occupied by a mixed state as random repeat or an independent group by each size in a particular locus, two rounds of FISH was sequentially performed using two probes of independent different size 5S rDNA and additional probe of only extra sequences of 120 bp in long NTS. Due to the highly conserved coding regions of both 5S rDNA, two different size 5S rDNA were detected in 3 loci in short arm of chromosome 6, however, extra sequences of long NTS was shown only in one locus within detected 5S rDNA from all examined chromosomes and interphase cells. This independent localization of two different size 5S rDNA suggests that 5S rDNA may be organized as a tandem repeat with random positions in a molecular level, but of cytogenetic view in chromosomes and interphase cells, they are organized as an independent group in a significant loci consisting of own size by the patterns of nucleotide variations.     

Competitive reporter monitored amplification (CMA)--quantification of molecular targets by real time monitoring of competitive reporter hybridization

Background

State of the art molecular diagnostic tests are based on the sensitive detection and quantification of nucleic acids. However, currently established diagnostic tests are characterized by elaborate and expensive technical solutions hindering the development of simple, affordable and compact point-of-care molecular tests.

Methodology and Principal Findings

The described competitive reporter monitored amplification allows the simultaneous amplification and quantification of multiple nucleic acid targets by polymerase chain reaction. Target quantification is accomplished by real-time detection of amplified nucleic acids utilizing a capture probe array and specific reporter probes. The reporter probes are fluorescently labeled oligonucleotides that are complementary to the respective capture probes on the array and to the respective sites of the target nucleic acids in solution. Capture probes and amplified target compete for reporter probes. Increasing amplicon concentration leads to decreased fluorescence signal at the respective capture probe position on the array which is measured after each cycle of amplification. In order to observe reporter probe hybridization in real-time without any additional washing steps, we have developed a mechanical fluorescence background displacement technique.

Conclusions and Significance

The system presented in this paper enables simultaneous detection and quantification of multiple targets. Moreover, the presented fluorescence background displacement technique provides a generic solution for real time monitoring of binding events of fluorescently labelled ligands to surface immobilized probes. With the model assay for the detection of human immunodeficiency virus type 1 and 2 (HIV 1/2), we have been able to observe the amplification kinetics of five targets simultaneously and accommodate two additional hybridization controls with a simple instrument set-up. The ability to accommodate multiple controls and targets into a single assay and to perform the assay on simple and robust instrumentation is a prerequisite for the development of novel molecular point of care tests.     

Allelic discrimination using fluorogenic probes and the 5′ nuclease assay

Large-scale screening for known polymorphisms will require techniques with few steps and the ability to automate each of these steps. In this regard, the 5′ nuclease, or TaqMan, PCR assay is especially attractive. A fluorogenic probe, consisting of an oligonucleotide labeled with both a fluorescent reporter dye and a quencher dye, is included in a typical PCR. Amplification of the probe-specific product causes cleavage of the probe, generating an increase in reporter fluorescence. By using different reporter dyes, cleavage of allele-specific probes can be detected in a single PCR. The 5′ nuclease assay has been successfully used to discriminate alleles that differ by a single base substitution. Guidelines have been developed so that an assay for any single nucleotide polymorphism (SNP) can be quickly designed and implemented. All assays are performed using a single reaction buffer and single thermocycling protocol. Furthermore, a standard method of analysis has been developed that enables automated genotype determination. Applications of this assay have included typing a number of polymorphisms in human drug metabolism genes.     

Immobilized stem-loop structured probes as conformational switches for enzymatic detection of microbial 16S rRNA

We have designed and evaluated novel DNA stem-loop structured probes for enzymatic detection of nucleic acid targets. These probes constitute a novel class of conformational switches for enzymatic activity, which in the absence of a target sterically shield an affinity label and upon hybridization of the target to the recognition sequence that forms the loop of the probe restore accessibility of the label for the binding of a reporter enzyme. Analysis of probe characteristics revealed stem stability as the most important parameter governing detection functionality, while other factors such as the length of linker molecules attaching the label to the stem-loop structure and the nature of the solid support proved to be less critical. Apparently, the bulky nature of the reporter enzyme facilitates shielding of the label in the absence of the target, thereby conferring considerable structural tolerance to the conformational switch system. The stem-loop structured probes allow sensitive detection of unlabeled nucleic acid targets. Employing a microtiter assay format, 4 ng of bacterial 16S ribosomal RNA corresponding to 8 fmol could be detected, which can be compared favorably with current immobilized molecular beacon concepts based on fluorescence detection.     

核酸疫苗双表达载体的构建及表达

将微小病毒内部核糖体进入位点(IRES)基因克隆到质粒pVAXI载体多克隆位点,构建出核酸疫苗双表达载体pVI。将绿色荧光蛋白(EGFP)基因和新霉素磷酸转移酶(neor)基因作为报告基因,连接到pVI载体IRES基因的前后两处多克隆位点,构建出表达载体pEIN。通过脂质体介导的方法将该载体转染COS-7细胞,筛选到同时表达绿色荧光蛋白和新霉素磷酸转移酶的表达株,表明成功地构建了核酸疫苗双表达载体,为构建多价核酸疫苗及带有分子佐剂的核酸疫苗打下了基础。     

fim-1 and fim-2: two new integration regions of Friend murine leukemia virus in myeloblastic leukemias.

The Friend helper murine leukemia virus (F-MuLV) induces in mice a high percentage of myeloblastic leukemias. Myeloblastic transformation is also observed after in vitro infection of long-term bone marrow cultures. To investigate the molecular events leading to the generation of myeloblastic leukemias, we first screened a panel of leukemic cells for rearrangement or amplification of known oncogenes or previously described specific integration sites. No modification of these genes was observed. Therefore, we searched for common integration sites by constructing a genomic library from a myeloblastic cell line harboring only five integrated proviruses. This library was screened with a virus-specific probe, and virus-host cellular junction fragments were subcloned. Two flanking cellular sequences corresponding to two different integrated proviruses were used to analyze additional myeloblastic leukemias. The first probe detected rearrangements in 2 of 42 myeloblastic leukemias, and the second probe detected rearrangements in 6 of 42. We demonstrated that, in each case, the rearrangement was the result of F-MuLV integration, with all proviruses in the same orientation and clustering in a region less than 3 kilobases long. The two regions, named fim-1 and fim-2, were different from 15 oncogenes tested. Rearrangements of these two regions were found in F-MuLV-induced myeloblastic leukemias but not in 20 lymphoid or erythroid leukemias induced by the same virus.     

Nonisotopic detection of RNA in an enzyme immunoassay using a monoclonal antibody against DNA-RNA hybrids

A sensitive nonisotopic solution hybridization assay for detection of RNA is described and characterized using a pSP65 plasmid model system. The assay procedure is based on a hybridization reaction in solution between a biotinylated DNA probe and a target RNA. The biotin-labeled hybrids are captured on a microtiter plate coated with an antibody to biotin. Bound DNA-RNA hybrids are detected by an immunoreaction with an enzyme-labeled monoclonal antibody specifically directed against DNA-RNA heteropolymers and the hybrids are quantitatively measured with the addition of a fluorogenic substrate. Optimal conditions under which to perform the assay were hybridization time, 1000 min; temperature, 75 degrees C; probe concentration, 0.2 microgram/ml; extent of probe biotinylation, 6.7%; buffer stringency, 2x SSC. A bisulfite-modified DNA probe was compared to nick-translated probes synthesized with reporter groups of different lengths (bio-11-dUTP or bio-19-dUTP). All probes could detect 10 pg/ml of target RNA. The presence of nonhomologous DNA or RNA sequences reduced the sensitivity of RNA detection by one half-log to 32 pg/ml (1.6 pg/assay).     

Excitation spectra and brightness optimization of two-photon excited probes

Two-photon probe excitation data are commonly presented as absorption cross section or molecular brightness (the detected fluorescence rate per molecule). We report two-photon molecular brightness spectra for a diverse set of organic and genetically encoded probes with an automated spectroscopic system based on fluorescence correlation spectroscopy. The two-photon action cross section can be extracted from molecular brightness measurements at low excitation intensities, while peak molecular brightness (the maximum molecular brightness with increasing excitation intensity) is measured at higher intensities at which probe photophysical effects become significant. The spectral shape of these two parameters was similar across all dye families tested. Peak molecular brightness spectra, which can be obtained rapidly and with reduced experimental complexity, can thus serve as a first-order approximation to cross-section spectra in determining optimal wavelengths for two-photon excitation, while providing additional information pertaining to probe photostability. The data shown should assist in probe choice and experimental design for multiphoton microscopy studies. Further, we show that, by the addition of a passive pulse splitter, nonlinear bleaching can be reduced--resulting in an enhancement of the fluorescence signal in fluorescence correlation spectroscopy by a factor of two. This increase in fluorescence signal, together with the observed resemblance of action cross section and peak brightness spectra, suggests higher-order photobleaching pathways for two-photon excitation.     

Electronic microarray analysis of 16S rDNA amplicons for bacterial detection

Electronic microarray technology is a potential alternative in bacterial detection and identification. However, conditions for bacterial detection by electronic microarray need optimization. Using the NanoChip electronic microarray, we investigated eight marine bacterial species. Based on the 16S rDNA sequences of these species, we constructed primers, reporter probes, and species-specific capture probes. We carried out two separate analyses for longer (533 bp) and shorter (350 and 200 bp) amplified products (amplicons). To detect simultaneously the hybridization signals for the 350- and 200-bp amplicons, we designed a common reporter probe from an overlapping sequence within both fragments. We developed methods to optimize detection of hybridization signals for processing the DNA chips. A matrix analysis was performed for different bacterial species and complementary capture probes on electronic microarrays. Results showed that, when using the longer amplicon, not all bacterial targets hybridized with the complementary capture probes, which was characterized by the presence of false-positive signals. However, with the shorter amplicons, all bacterial species were correctly and completely detected using the constructed complementary capture probes.     

Electrochemical detection of low-copy number salivary RNA based on specific signal amplification with a hairpin probe

We developed a technique for electrochemical detection of salivary mRNA employing a hairpin probe (HP). Steric hindrance (SH) suppresses unspecific signal and generates a signal-on amplification process for target detection. The stem-loop configuration brings the reporter end of the probe into close proximity with the surface and makes it unavailable for binding with the mediator. Target binding opens the hairpin structure of the probe, and the mediator can then bind to the accessible reporter. Horseradish peroxidase is utilized to generate electrochemical signal. This signal-on process is characterized by a low basal signal, a strong positive readout and a large dynamic range. The SH is controlled via hairpin design and electrical field. By applying electric field control to HPs, the limit of detection of RNA is about 0.4 fM, which is 10 000-fold more sensitive than conventional linear probes. Endogenous Interleukin-8 mRNA is detected with the HP, and good correlation with the quantitative PCR technique is obtained. The resultant process allows a simple setup and by reducing the number of steps it is suited for the point-of-care detection of specific nucleic acid sequences from complex body fluids such as saliva.     

Potential charge transfer probe induced conformational changes of model plasma protein human serum albumin: Spectroscopic, molecular docking, and molecular dynamics simulation study

The nature of binding of specially designed charge transfer (CT) fluorophore at the hydrophobic protein interior of human serum albumin (HSA) has been explored by massive blue-shift (82 nm) of the polarity sensitive probe emission accompanying increase in emission intensity, fluorescence anisotropy, red edge excitation shift, and average fluorescence lifetimes. Thermal unfolding of the intramolecular CT probe bound HSA produces almost opposite spectral changes. The spectral responses of the molecule reveal that it can be used as an extrinsic fluorescent reporter for similar biological systems. Circular dichrosim spectra, molecular docking, and molecular dynamics simulation studies scrutinize this binding process and stability of the protein probe complex more closely.     

Application of a unique server-based oligonucleotide probe selection tool toward a novel biosensor for the detection of Streptococcus pyogenes

We developed a software program for the rapid selection of detection probes to be used in nucleic acid-based assays. In comparison to commercially available software packages, our program allows the addition of oligotags as required by nucleic acid sequence-based amplification (NASBA) as well as automatic BLAST searches for all probe/primer pairs. We then demonstrated the usefulness of the program by designing a novel lateral flow biosensor for Streptococcus pyogenes that does not rely on amplification methods such as the polymerase chain reaction (PCR) or NASBA to obtain low limits of detection, but instead uses multiple reporter and capture probes per target sequence and an instantaneous amplification via dye-encapsulating liposomes. These assays will decrease the detection time to just a 20 min hybridization reaction and avoid costly enzymatic gene amplification reactions. The lateral flow assay was developed quantifying the 16S rRNA from S. pyogenes by designing reporter and capture probes that specifically hybridize with the RNA and form a sandwich. DNA reporter probes were tagged with dye-encapsulating liposomes, biotinylated DNA oligonucleotides were used as capture probes. From the initial number of capture and reporter probes chosen, a combination of two capture and three reporter probes were found to provide optimal signal generation and significant enhancement over single capture/reporter probe combinations. The selectivity of the biosensor was proven by analyzing organisms closely related to S. pyogenes, such as other Streptococcus and Enterococcus species. All probes had been selected by the software program within minutes and no iterative optimization and re-design of the oligonucleotides was required which enabled a very rapid biosensor prototyping. While the sensitivity obtained with the biosensor was only 135 ng, future experiments will decrease this significantly by the addition of more reporter and capture probes for either the same rRNA or a different nucleic acid target molecule. This will lead to the possibility of detecting S. pyogenes with a rugged assay that does not require a cell culturing or gene amplification step and will therefore enable rapid, specific and sensitive onsite testing.     

Use of a fluorogenic probe in a PCR-based assay for the detection of Listeria monocytogenes.

A PCR-based assay for Listeria monocytogenes that uses the hydrolysis of an internal fluorogenic probe to monitor the amplification of the target has been formatted. The fluorogenic 5' nuclease PCR assay takes advantage of the endogenous 5' --> 3' nuclease activity of Taq DNA polymerase to digest a probe which is labelled with two fluorescent dyes and hybridizes to the amplicon during PCR. When the probe is intact, the two fluorophores interact such that the emission of the reporter dye is quenched. During amplification, the probe is hydrolyzed, relieving the quenching of the reporter and resulting in an increase in its fluorescence intensity. This change in reporter dye fluorescence is quantitative for the amount of PCR product and, under appropriate conditions, for the amount of template. We have applied the fluorogenic 5' nuclease PCR assay to detect L. monocytogenes, using an 858-bp amplicon of hemolysin (hlyA) as the target. Maximum sensitivity was achieved by evaluating various fluorogenic probes and then optimizing the assay components and cycling parameters. With crude cell lysates, the total assay could be completed in 3 h with a detection limit of approximately 50 CFU. Quantification was linear over a range of 5 x 10(1) to 5 x 10(5) CFU.