Characterization of cell-wall polymers from cotton ovule culture fiber cells by gel permeation chromatography

Summary Cotton (Gossypium hirsutum, Texas Marker-1) fiber cells originating from ovule culture have been analyzed by gel permeation chromatography of dimethyl acetamide/lithium chloride-soluble components and compared within planta-grown fibers. The profile of cell-wall polymer molecular weights indicated that fibers grown for 21 d in culture more closely resembled fibers growingin planta for 30 d post-anthesis than fully mature fibers. The weight average molecular weight was 3 400 000 and number average molecular weight of polymers from ovule culture fibers was 109 000. Analysis of the polymer weight fraction distribution revealed that ovule culture fibers were similar to 30 d post-anthesis immature fibers but lacked a low molecular weight (log M 3–4) polymer fraction. Assessment of the polymer branching frequency showed that ovule culture fibers were intermediate in branching between 30 d post-anthesis fiber and maturein planta fiber. In summary, polymers deposited in cell walls of ovule culture fibers appear to grossly mimic the polymers accumulated during normal fiber biogenesisin planta, yet subtle differences may explain why ovule culture fibers rarely reach their full genetic potential in length.     

Molecular markers associated with the immature fiber (im) gene affecting the degree of fiber cell wall thickening in cotton (Gossypium hirsutum L.)

Cotton fiber fineness and maturity measured indirectly as micronaire (MIC) are important properties of determining fiber grades in the textile market. To understand the genetic control and molecular mechanisms of fiber fineness and maturity, we studied two near isogenic lines, Gossypium hirsutum, Texas Marker-1 wild type (TM-1) and immature fiber (im) mutant showing a significant difference in MIC values. The fibers from im mutant plants were finer and less mature with lower MIC values than those from the recurrent parent, TM-1. A comprehensive fiber property analysis of TM-1 and im mutant showed that the lower MIC of fibers in im mutant was due to the lower degree of fiber cell wall thickening as compared to the TM-1 fibers. Using an F₂ population comprising 366 progenies derived from a cross between TM-1 and im mutant, we confirmed that the immature fiber phenotype present in a mutant plant was controlled by one single recessive gene im. Furthermore, we identified 13 simple sequence repeat markers that were closely linked to the im gene located on chromosome 3. Molecular markers associated with the im gene will lay the foundation to further investigate genetic information required for improving cotton fiber fineness and maturity.     

Analysis of cell-wall polymers during cotton fiber development

Although the fibers of cotton (Gossypium hirsutum L.) are single cells with a secondary wall composed primarily of cellulose, the cell-wall polymers of the fibers are technically difficult to characterize with respect to molecular weights. This limitation hinders understanding how the fiber wall composition changes during development, particularly with respect to genotypic variations, and how the molecular composition is related to physical properties. We analyzed cell-wall polymers from cotton fibers (cultivar, Texas Marker-1) at several developmental stages (8–60 days post-anthesis; DPA) by gel-permeation chromatography of components soluble in dimethyl acetamide and lithium chloride. This procedure solubilizes fiber cell-wall components directly without prior extraction or derivatization, processes that could lead to degradation of high-molecular-weight components. Cellwall polymers from fibers at primary cell-wall stages had lower molecular weights than the cellulose from fibers at the secondary wall stages; however, the high-molecularweight cellulose characteristic of mature cotton was detected as early as 8 DPA. High-molecular-weight material decreased during the period of 10–18 DPA with concomitant increase in lower-molecular-weight wall components, possibly indicating hydrolysis during the later stages of elongation.Abbreviations DMAC dimethyl acetamide - DP degree of polymerization - DPA days post anthesis - GPC gel-permeation chromatography - MW molecular weight - MWD molecular-weight distribution - TM-1 Texas Marker 1     

Fiber development in preanthesis cotton ovules

A tissue culture method was developed to investigate the production of cotton (Gossypium hirsutum L. cv. Texas Marker-1) fibers in vitro. Ovules were excised from 3, 5, 7 and 9 days preanthesis ovaries and placed on an agar-solidified, modified Murashige and Skoog medium containing 2.3 μ M kinetin and 0.45 μ M –2,4–dichlo-rophenoxyacetic acid or 2.3 μ M kinetin and 10.7 μ M naphthaleneacetic acid. Ovules formed fibers and callus tissue. Fibers formed in vitro were up to 10 mm long, 10–22 μ wide and the cell wall was 1–3 μ M thick. Callus tissue cells were subcultured for over 25 weeks and their degree of elongation was monitored. The ability of ovule-derived cells to direct expansion in a longitudinal direction diminished, while lateral expansion increased with time in culture.     

Functional characterization of <Emphasis Type="Italic">Gossypium hirsutum</Emphasis> profilin 1 gene (<Emphasis Type="Italic">GhPFN1</Emphasis>) in tobacco suspension cells

Cotton fiber is an extremely long plant cell. Fiber elongation is a complex process and the genes that are crucial for elongation are largely unknown. We previously cloned a cDNA encoding an isoform of cotton profilin and found that the gene (designated GhPFN1) was preferentially expressed in cotton fibers. In the present study, we have further analyzed the expression pattern of GhPFN1 during fiber development and studied its cellular function using tobacco suspension cells as an experimental system. We report that expression of GhPFN1 is tightly associated with fast elongation of cotton fibers whose growth requires an intact actin cytoskeleton. Overexpression of GhPFN1 in the transgenic tobacco cells was correlated with the formation of elongated cells that contained thicker and longer microfilament cables. Quantitative analyses revealed a 2.5–3.6 fold increase in total profilin levels and a 1.6–2.6 fold increase in the F-actin levels in six independent transgenic lines. In addition to the effect on cell elongation, we also observed delayed cell cycle progression and a slightly lower mitotic index in the transgenic cells. Based on these data, we propose that GhPFN1 may play a critical role in the rapid elongation of cotton fibers by promoting actin polymerization. Hai-Yun Wang and Yi Yu contributed equally to this work.     

Embryogenic cell suspensions of Triticum aestivum x Leymus angustus F1 hybrids: characterization and plant regeneration

Summary Embryogenic cell suspension cultures were established from Triticum aestivum X Leymus angustus F₁ hybrids, using compact nodular calli derived from inflorescence segments. Calli originating from leaf segments did not give rise to stable cell suspensions. Growth measurements of the cell suspensions revealed that they continued rapid growth up to 10 days after subculturing. Flow cytometric studies of the cell cycle over a 7 day culture period showed that the majority of cells were in G₁ phase while the rest were either in S or G₂. During the 7 days of culture, no significant differences in DNA distribution patterns were observed. The cells from suspension cultures produced somatic embryos when they were transferred to different solid media. The embryos germinated and gave rise to plantlets which were successfully rooted and transferred to soil.     

Establishment of <Emphasis Type="Italic">Cyperus aromaticus</Emphasis> cell suspension cultures for the production of Juvenile hormone III

Cell suspension cultures of Cyperus aromaticus were established from the yellow friable callus derived from the root explants of in vitro plantlets. Four callus cell lines were selected based on their growth index from two populations of callus cultures originated from the mother plants grown in two different locations. The selected four cell lines (Z1, Z6, P4, P9) showed uniform cell growth but produced different amounts of juvenile hormone III (JHIII). The Z1 cell line possessed fast-growing characteristics, produced a high JHIII content, and was chosen as the elite cell line for an optimization study of C. aromaticus cell suspension cultures. An inoculum cell mass of 0.3 g from 12-d cultures in 30 ml culture medium was found to be the optimum inoculum size and culture age for establishing the cell suspension culture of C. aromaticus. MS basal medium supplemented with 4.5 mg/l 2,4-D and 5.5 mg/l NAA was found to be the best medium for production of maximum cell biomass and JHIII. These results indicated that JHIII can be produced from suspension culture of C. aromaticus using a single-stage cell-culture system.     

A novel cottong ovule culture: Induction, growth, and characterization of submerged cotton fibers (Gossypium hirsutum L.)

Summary The growth of submerged cotton (Gossypium hirsutum L.) fibers from cultured ovules has been investigated. The results indicate that exogenous plant hormone levels regulate the induction of submerged fiber growth. The age of ovules at induction is also important. Cell diameter, wall thickness, and cell length of submerged fibers were measured and compared with air-grown fibers and fibers grown in vivo (produced by cotton plants grown in the greenhouse). Various cellwall thickening patterns were observed among submerged fibers, while only one predominant cell-wall deposition pattern was produced in air-grown fibers and in fibers produced in vivo. The diameter of submerged fibers was about the same as that of air-grown fibers but about 22% less than that of fibers grown, in vivo. It appears that the secondary cell wall thickenings are initiated earlier in submerged fibers. The cell-wall thickness of submerged fibers, at 41 d post anthesis (DPA), was 51% greater than that of fibers grown in vivo, whereas the cell-wall thickness of air-grown fibers was 42% less than that of fibers produced in vivo. The cell length of submerged fibers was approximately half that of fibers grown in vivo. and the air-grown fiber length was about two-thirds of fibers grown in vivo. The age of ovules at induction affects the outcome of the air-grown fiber-cell length, but does not appear to affect the length of submerged fiber cells. To produce submerged fiber growth, we found that the optimal age of ovules at induction was 0 DPA, and the optimal medium (with a GA₃ of 0.5 μM and an IAA range of 5-20 μM) depends on the time of ovule induction (−2 to+2DPA). We conclude that conditions leading to submerged cotton fiber growth have great potential for (a) direct monitoring of growth and making precise, detailed measurements during fiber growth and development; (b) producing cellulose and fibers in vitro more efficiently than earlier ovule-culture methods; and (c) using these unique cultures to obtain a better understanding of signal transduction and gene expression leading to growth, development, and programmed cell death in the life history of the cotton fiber.     

Influence of Mechanical Stress on Auxin-Stimulated Growth of Excised Pea Stem Sections

The auxin to cytokinin ratios are described for promoting growth in the in vitro cultures of soybean (Glycine max (L.) Merr. cv. Bragg) and perennial clover (Trifolium repens L. cv. Regal Ladinc). Callus growth was induced on somatic tissue with 50:1 auxin to cytokinin (w/w) ratio. A 5:1 ratio served for initiation of cell suspensions from callus and for subsequent growth of callus from cells in suspension. A 1:2 ratio served for regeneration of buds and plantlets from the callus grown from cells. Although (2,4-dichlorophenoxy) acetic acid was the auxin for suspension and regenerative cultures, (2,4,5-trichlorophenoxy)acetic acid was the more effective auxin for initiation of callus on somatic tissue. All cultures were grown with 6-furfurylaminopurine as the cytokinin. The phytohormones strongly influenced the rates of culture growth, but determination of culture type was augmented by dl-alpha tocopherol acetate and iron. Tocopherol and a relatively high complement of iron promoted growth of juvenile cultures, whereas low level of iron and absence of tocopherol favored growth to comparatively more differentiated cultures. Without tocopherol, no callus formed on somatic tissue during the allotted period of incubation. Tocopherol plus a complement of low iron enabled growth of callus on rapidly growing somatic tissue. A high level of iron enabled comparatively more callus growth but suppressed growth of somatic tissue. In suspension cultures tocopherol and a high iron level enhanced dispersion of cells. A low iron complement in the absence of tocopherol induced growth of callus from cells and subsequent regeneration of buds and plantlets from the callus.     

Development and Characterization of a Nonmorphogenetic Cell Line of Wheat (Triticum aestivum)

This study was conducted to compare characteristics of a wheat (Triticum aestivum L.) cell line to those of the maize (Zea mays L.) black Mexican sweet (BMS) cell line and to compare protoplasts isolated from suspension cells of these cell lines. The wheat cell line was established from immature-embryo derived callus of the experimental line ‘ND7532’ and was conditioned for growth in suspension culture. For both cell lines, measurements of packed cell volume (PCV), fresh weight (FW), and dry weight (DW) were taken at 3 day intervals from suspension cultures. Measurements of FW of calluses cultured from suspension cells of both cell lines were taken at 6 day intervals. The morphogenetic potential of the wheat ND7532 cell line was tested in both callus and suspension cultures using media promoting regeneration and/or organogenesis. Growth rates of ND7532 cells in suspension culture were comparable to those of BMS cells. However, relative growth rates of calluses recovered from ND7532 suspension cells were slower than those of calluses recovered from BMS suspension cells. The ND7532 cell line has very limited morphogenetic potential and has been maintained as rapidly growing callus tissue for 11 years. Yields of protoplasts from suspension cells of the two cell lines were comparable, though ND7532 protoplasts were typically smaller. The wheat cell line has is now designated ND7532-NM (nonmorphogenetic) and is available for cellular and molecular biology research.     

Establishment and Growth Kinetics of the Mutant Ehrlich-Lettré Ascites Cell Strain Hd33 In Permanent Suspension Culture1,2

Cells of a mutant in vivo subline of the Ehrlich-Lettré mouse ascites tumour (ELAT) were converted to growth in suspension culture. Kinetic analysis revealed the selective character of the conversion process; without a detectable adaptation period, a fraction of about 2 × 10^-5 of the explanted cells continued to grow in vitro. the resulting, mutant Ehrlich-Lettré ascites cell strain was designated HD33 and propagated uninterruptedly from 1974 on. the corresponding in vivo ELAT subline HD33 was derived from the HD33 ascites cell strain by intraperitoneal retransplantation. In HD33 cell suspension cultures, the population doubling time, the average intermitotic interval, as determined by videomonitoring, and the average duration of the cell cycle, as determined from percentage of labelled mitoses (PLM) data, were all measured at 15 hr. Cell loss and quiescent compartments were insignificant. the duration of the G₁ phase was effectively zero. Both PLM data and [³H]/[¹⁴C] thymidine double-labetling measurements revealed an S-phase duration of between 11 and 12 hr. the G₂ phase lasted 3–5 hr. The HD33 strain differs from comparable suspension strains of wild-type Ehrlich ascites cells in the insignificant role of density-dependent inhibition in growth, and the striking prolongation of the S phase which is associated with an excessive, cytoplasmic storage of glycogen by the mutant cells.     

Stable expression of recombinant human coagulation factor XIII in protein-free suspension culture of Chinese hamster ovary cells

The recombinant a and bsubunits for human coagulation factor XIII were transfected into Chinese hamster ovary (CHO) cells. CHO cells were amplified and selected with methotrexate in adherent cultures containing serum, and CHO 1-62 cells were later selected in protein-free medium. To develop a recombinant factor XIII production process in a suspension culture, we have investigated the growth characteristics of CHO cells and the maintenance of factor XIII expression in the culture medium. Suspension adaptation of CHO cells was performed in protein-free medium, GC-CHO-PI, by two methods, such as serum weaning and direct switching from serum containing media to protein-free media. Although the growth of CHO cells in suspension culture was affected initially by serum depletion, cell specific productivity of factor XIII showed only minor changes by the direct switching to protein-free medium during a suspension culture. As for the long-term stability of factor XIII, CHO 1-62 cells showed a stable expression of factor XIII in protein-free condition for 1000 h. These results indicate that the CHO 1-62cells can be adapted to express recombinant human factor XIII in a stable maimer in suspension culture using a protein-free medium. Our results demonstrate that enhanced cell growth in a continuous manner is achievable for factor XIII production in a protein-free medium when a perfusion bioreactor culture system with a spin filter is employed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Nutrient modifications for improved growth of Brassica nigra cell suspension cultures

Cell pellet yield of two Brassica nigra suspension cultures was stimulated by amino acid supplements in the growth medium. This could confound the interpretation of amino acid feeding studies involved in characterizing amino acid metabolism mutants. The nutritional requirements of one of the Brassica nigra suspension cultures growing in modified Murashige & Skoog medium were therefore reviewed. Sucrose at 2% w/v was growth limiting and amino or organic acid supplements stimulated growth rate and yield. Increasing sucrose to 6% and supplementing with 15 mM sodium succinate increased maximum cell pellet volume by 2.7 times and maximum dry weight by 2.8 times, stimulated cell enlargement and produced similar maximum numbers of cells per culture. The further addition of an amino acid supplement of 4 mM alanine, 4 mM glutamine and 1 mM glutamate produced no further improvement. The revised medium was more strongly buffered, supported cell growth for a longer period and permitted a 30-fold reduction in the minimum cell inoculum. Cells grown in the revised medium are 10-fold more resistant to growth inhibition by the tryptophan analogue 5MT. These advantages recommend the revised medium for amino acid feeding, mutant isolation and similar studies.     

Suspension culture of drosophila cells employing a gyratory shaker

Summary To develop a method for culturing a large number of small-scale suspension cultures ofDrosophila melanogaster cells simultaneously, basic conditions were studied using a cell line GM₂ and a gyratory shaker. Under gyration at more than 180 rpm, a majority (>80%) of the cells still remained as suspension and grew normally. Lower speed of gyration caused adhesion of the cells to a substratum. Furthermore, size of the culture vessels was found to affect the pattern of cell growth. Five- or 10-ml Erlenmeyer flasks gave satisfactory results, but the growth curves in 30-ml flasks differed from flask to flask and the saturation level was lower. Besides, the growth curves in the latter case were quite different depending on the volume of the medium. A preliminary experiment showed that the type of flask might affect the pattern of a growth curve. Initial cell densities has to be more than 6×10⁴ cells per ml. Lower densities resulted in the longer doubling time or no increase in the cell number. Therefore the following conditions are recommended as a standard for gyration culture ofD. melanogaster cell, GM₂: speed of gyration, 180 rpm; culture vessel, 5- or 10-ml Erlenmeyer flask of a certain type; initial cell density, 1 to 5×10⁵ per ml. Both D20 and modified Schneider’s medium could be utilized as the medium.     

Influence of culture conditions on growth of FL-74 cells and feline oncornavirus cell membrane associated antigen production

Summary The FL-74 cell, a feline lymphoblastoid cell line derived from a tumor induced by leukemia virus, grows equally well in static suspension culture (plastic T-flask or silicone treated glass bottles) or in spinner culture. No growth was observed in unsiliconized glass bottles. Although feline leukemia virus production was nearly the same in FL-74 grown in each of the above types of vessel, the expression of the feline oncornavirus membrane associated antigen (FOCMA), as determined by membrane immunofluorescence, was more intense and more complete on cells grown in static suspension. Moreover, higher fluorescent antibody titer endpoints were observed with cells from static suspension cultures than with cells from spinner cultures. FL-74 cells grown in spinner culture, when subjected to partial synchrony by cold block or by deprivation of essential amino acids (arginine and/or isoleucine) for 12 hr, achieved a membrane fluorescent pattern for FOCMA similar to celsl grown in static suspension. It is proposed that the expression of FOCMA on the cell membrane surface is cell-cycle dependent, and that the rate at which a cell passes through the cell cycle determines the pattern and intensity of the fluorescence of the cell membrane. Supported in part by: American Cancer Society Grant IM-27 and NIH Contract NO1-CP-43217     

Photoautotrophic growth of cell suspension cultures fromChenopodium rubrum in an airlift fermenter

Summary This communication describes the construction and operation of an airlift fermenter for the photoautotrophic growth of cell suspension cultures fromChenopodium rubrum. The basic batch culture unit provides a culture of 1.51 volume, sufficient to permit frequent aseptic sampling. It can be maintained at any desired temperature and aerated to different extents. Using an initial cell density of about 400,000 cells per ml suspension, the increase in cell number is 270% after a 14 days' growth period, although the stationary phase of growth is not yet reached. The transfer of photoautotrophic cell suspensions fromChenopodium rubrum from stationary growth into the large volume of fresh culture medium in the airlift fermenter results in an immediate protein formation, followed by an exponential phase of cell division, whereas rapid chlorophyll accumulation is delayed by 2 days.The growth capacities of photoautotrophic fermenter cultures including protein and chlorophyll formation as well asin vitro activities of the ribulosebisphosphate carboxylase and the phosphoenolpyruvate carboxylase are greatly lower as compared to photoautotrophic cells propagated in standard two-tier culture vessels using 30 ml culture medium. However the pattern of change in the activities of carboxylation enzymes is quite similar in both culture systems.Photoautotrophic cell suspensions fromChenopodium rubrum grown in an airlift fermenter assimilate about 90 mol CO₂/mg chlorophyll × hour. Dark CO₂ fixation is about 1.5% of the light values.Abbreviations PEF phosphoenolpyruvate - RuDP ribulosebisphosPhate - NS ground glass joints of standardized size made from Duran glass, Schott, Germany     

Development of suspension culture of Podophyllum hexandrum for production of podophyllotoxin

A suspension culture of Podophyllum hexandrum was established. As the cultures grew, reduction in cell viability, biomass and product yield were associated with browning of culture medium, clumping of cells and drop in medium pH. Supplementation of the medium with both polyvinylpyrrollidone (PVP) and pectinase eliminated these problems. PVP at 10 g l^–1 was optimum for both growth of and product formation in P. hexandrum suspension cultures.     

Cell growth and hemoglobin synthesis in murine erythroleukemic cells propagated in high density microcapsule culture

Summary A new microencapsulation technology, developed for the encapsulation of living cells, has been demonstrated to be useful for the study of growth and differential gene expression using Friend erythroleukemic cells cultured at high cell densities. Using this technology, cultures of FL Clone 745 cells were encapsulated within semipermeable membranes composed of cross-linked alginic acid and poly-l-lysine. Cell growth studies measuring total cell number demonstrated an average generation time of 8.5 h in 5% (vol/vol) microcapsule cultures vs. 8.0 h in suspension cultures. Similar microcapsule cultures were serially propagated for more than 90 cell generations (13 sequential passages) with no significant change in this growth rate. In addition, final culture densities of greater than 1.0×10⁸ cells/ml of intracapsular volume were attained using a 3% (vol/vol) microcapsule culture in conjunction with a standard refeeding schedule. Comparison of the level of dimethyl sulfoxide-induced hemoglobin production in suspension and microcapsule cultures demonstrated that the total amount of hemoglobin produced on a per cell basis was comparable in both systems. Due to the retention characteristics of the semipermeable membrane, the concentration of detergent-released hemoglobin, relative to other released protein, was approximately twofold higher in microcapsule cultures than in control suspension cultures.