An improved method for embedding hard tissue in polymethyl methacrylate

An improved routine method for embedding tissue, especially hard tissue, in polymethyl methacrylate (pMMA) is described. The improvements were: the final dehydration step before MMA infiltration was performed with methanol in a Soxhlet apparatus; the stabilizer hydroquinone was not extracted from the monomer (MMA), and more important, the commonly used polymerization initiator, benzoyl peroxide (bpo), was replaced by the initiator, bis (4-tert-butylcyclohexyl)peroxydicarbonate (bbpd). Bbpd is preferred to bpo because it is not explosive, far less is needed and it has a suitable half life. Moreover, bbpd, as obtained from the manufacturer, needs no further purification, in contrast to bpo. Temperatures during bbpd initiated polymerization did not exceed 48 C. In bbpd initiated pMMA, bubbles were almost never generated.     

Polymerization of optical isomers of phenylalanine N-carboxyanhydride by poly(N-methylalanine) diethylamide

In the polymerization of phenylalanine N-carboxyanhydride (NCA) using poly(N-methyl-L -or DL -alanine) diethylamide as initiator, the polymerization rate was L -NCA ? D -NCA > DL -NCA. This is a new type of selective polymerization and indicates the incompleteness of earlier investigations to study the asymmetrically selective polymerization without D -NCA. Neither secondary structure nor optical activity of the polymeric initiator is a reason for the selectivity. Hence the cause for the selectivity was sought in the properties of the NCA's in solution. However, the selectivity was not observed in the polymerization initiated by poly(L -phenylalanine) dimethylamide. The importance of the initiator being a secondary amine type was suggested. The experimental results are discussed on the basis of these considerations.     

Fluorescence microscopy techniques for quantitative evaluation of organic biocide distribution in antifouling paint coatings: application to model antifouling coatings

A test matrix of antifouling (AF) coatings including pMMA, an erodible binder and a novel trityl copolymer incorporating Cu₂O and a furan derivative (FD) natural product, were subjected to pontoon immersion and accelerated rotor tests. Fluorescence and optical microscopy techniques were applied to these coatings for quantification of organic biocide and pigment distribution. Total leaching of the biocide from the novel copolymer binder was observed within 6 months of rotor immersion, compared to 35% from the pMMA coating. In pontoon immersions, 61% of the additive was lost from the pMMA coating, and 53% from the erodible binder. Profiles of FD content in the binders revealed an accelerated loss of additive from the surface of the CDP resulting from rosin degradation, compared to even depletion from pMMA. In all samples, release of the biocide was inhibited beyond the Cu₂O front, corresponding to the leached layer in samples where Cu₂O release occurred.     

Enzyme immobilization on ultrafine cellulose fibers via poly(acrylic acid) electrolyte grafts

Ultrafine cellulose fiber (diameter 200-400 nm) surfaces were grafted with polyacrylic acid (PAA) via either ceric ion initiated polymerization or methacrylation of cellulose with methacrylate chloride (MACl) and subsequent free-radical polymerization of acrylic acid. PAA grafts by ceric ion initiated polymerization increased with increasing reaction time (2-24 h), monomer (0.3-2.4 M), and initiator (1-10 mM) concentrations, and spanned a broad range from 5.5-850%. PAA grafts on the methacrylated cellulose fibers also increased with increasing molar ratios of MACl to cellulosic hydroxyl groups (MACl/OH, 2-6.4) and monomer acrylic acid (AA) to initiator potassium persulfate (KPS) ratios ([AA]/[KPS], 1.5-6), and were in a much narrower range between 12.8% and 29.4%. The adsorption of lipase (at 1 mg/ml lipase and pH 7) and the activity of adsorbed lipase (pH 8.5, 30 degrees C), in both cases decreased with increasing PAA grafts. The highest adsorption and activity of the lipase on the ceric ion initiated grafted fibers were 1.28 g/g PAA and 4.3 U/mg lipase, respectively, at the lowest grafting level of 5.5% PAA, whereas they were 0.33 g/g PAA and 7.1 U/mg lipase, respectively, at 12.8% PAA grafts on the methacrylated and grafted fibers. The properties of the grafted fibers and the absorption behavior and activity of lipase suggest that the PAA grafts are gel-like by ceric-initiated reaction and brush-like by methacrylation and polymerization. The adsorbed lipase on the ceric ion-initiated grafted surface possessed greatly improved organic solvent stability over the crude lipase. The adsorbed lipases exhibited 0.5 and 0.3 of the initial activity in the second and third assay cycles, respectively.     

Fluorescence microscopy techniques for quantitative evaluation of organic biocide distribution in antifouling paint coatings: application to model antifouling coatings

A test matrix of antifouling (AF) coatings including pMMA, an erodible binder and a novel trityl copolymer incorporating Cu?O and a furan derivative (FD) natural product, were subjected to pontoon immersion and accelerated rotor tests. Fluorescence and optical microscopy techniques were applied to these coatings for quantification of organic biocide and pigment distribution. Total leaching of the biocide from the novel copolymer binder was observed within 6 months of rotor immersion, compared to 35% from the pMMA coating. In pontoon immersions, 61% of the additive was lost from the pMMA coating, and 53% from the erodible binder. Profiles of FD content in the binders revealed an accelerated loss of additive from the surface of the CDP resulting from rosin degradation, compared to even depletion from pMMA. In all samples, release of the biocide was inhibited beyond the Cu?O front, corresponding to the leached layer in samples where Cu?O release occurred.     

Asymmetric synthesis polymerization of meso oxiranes and thiiranes

The asymmetric synthesis polymerization or “enantiogenic” polymerization of some meso oxiranes, cis-dimethyloxirane (cis-DMO) and cyclohexene oxide (CHO), and thiiranes, cis-dimethylthiirane (cis-DMT) and cyclohexene sulfide (CHS), initiated with different chiral systems was examined. Strong differences in behaviour were observed between oxiranes and thiiranes depending on the initiator used. The initiators based on ZnEt₂ or CdMe₂ and a chiral diol give optically active polymers from meso thiiranes but fail to induce an asymmetric polymer synthesis with meso oxiranes. A new chiral initiator based on ZnEt₂ and (1S,2R)-ephedrine allowed us to prepare optically active poly CHOs, which can be fractionated into fractions exhibiting opposite optical activities. © 1992 Wiley-Liss, Inc.     

Modeling the spontaneous initiation of the polymerization of methyl methacrylate

The mechanism of the spontaneous initiation of the polymerization of methyl methacrylate (MMA) was investigated theoretically. The six minimum energy paths (MEP) of the possible reactions were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional and 6-31G* basis set. The Diels-Alder initiation mechanism (path (I) and path (II)) with remarkably high energy barriers is not applicable to MMA. Four favorable paths were found (path (III), path (IV), path (V) and path (VI)), which are supporting the Flory mechanism. Path (V) has the lowest active energy. Therefore this path is considered as the main path for the spontaneous polymerization of MMA. Figure The mechanism of the spontaneous initiation of the polymerization of methyl methacrylate (MMA) was investigated theoretically. The six minimum energy paths (MEP) of the possible reactions were calculated using the density functional theory (DFT) in conjunction with the B3LYP functional and 6-31G* basis set.     

Block copolymerization of α-amino acid N-carboxyanhydride initiated by vinyl polymers having a terminal amino group and the characterization of the block copolymers

Poly(methyl methacrylate) and polystyrene having terminal amino groups were synthesized by the radical polymerization of those monomers in the presence of 2-mercaptoethylammonium chloride as a chain-transfer agent. By the terminal group analysis and the molecular weight determination of the polymers, 0.5–1.3 amino groups were found in a chain of poly(methyl methacrylate) and 0.5–2.5 amino groups in a chain of polystyrene. Using these polymers having a terminal amino group as an initiator, the block polymerization of α-amino acid N-carboxyanhydride (NCA) was carried out. In the polymerizations of Glu(OBzl) NCA and Lys(Z) NCA by the poly(methyl methacrylate) initiator, the terminal amino group underwent a nucleophilic addition reaction to NCA and initiated the polymerization, yielding A-B-type block copolymers in a high yield. The same was observed in the polymerizations of Gly(OBzl) NCA and Lys(Z) NCA by the polystyrene initiator. By eliminating the protecting groups of the side chains of the polypeptide segment, the block copolymers poly(methyl methacrylate)-poly(Glu), poly(methyl methacrylate)-poly(Lys), polystyrene-poly(Glu) and polystyrene-poly(Lys) were synthesized with little side reactions. The side chain amino groups of poly(Lys) segment in the poly(methyl methacrylate)-poly(Lys) block copolymers were sulphonated or stearoylated successfully.     

Mechanistic limitations in the synthesis of polyesters by lipase-catalyzed ring-opening polymerization

Lipase-catalyzed polymerization of caprolactone (CL) in toluene with methoxy-poly(ethylene glycol) (MPEG) and water as initiators was characterized in detail for mechanistic insight. (1)H NMR analysis of polycaprolactone chains (PCL), dicaprolactone, degree of esterification of MPEG, and fractions of PCL chains initiated by MPEG and water were used to follow the reactions. The data were analyzed with the kinetic scheme involving formation of the acylenzyme and its consequent reaction with MPEG, water, or PCL to yield the MPEG- or water-initiated PCL chains, or increase in PCL length. A limit for MPEG initiator esterification in lipase-catalyzed CL polymerization was observed and was explained by preferential reaction of PCL propagation over MPEG esterification at long reaction times and low MPEG concentrations. Slower monomer conversion in concentrated monomer solutions was explained by decreased partitioning of PCL between the solvent and the enzyme. This effect resulted in inhibition of the lipase by the reaction product, PCL chains, and/or insufficient diffusion of monomer to the enzyme active site. High monomer/initiators ratio in these solutions did not yield longer polymer chains due to decreased monomer conversion and the corresponding decrease in product yields; lower yields were also observed for chain initiation by MPEG and water. A shift in the reaction rate-limiting step from formation of acylenzyme in dilute CL solutions to its deacylation in concentrated CL solutions yielded higher PCL polydispersity due to increased initiation by water. Enhanced intramolecular cyclization was also observed. Endgroup composition of PCL chains was influenced by the concentration of monomer, ratio of initiators (MPEG and water), and reaction time, yielding PCL chains initiated exclusively by MPEG at "infinite reaction times."     

New cobalt-mediated radical polymerization (CMRP) of methyl methacrylate initiated by two single-component dinuclear β-diketone cobalt (II) catalysts

Two dinuclear cobalt complexes based on bis-diketonate ligands (ligand 1: 3,3'-(1,3-phenylene)bis(1-phenylpropane-1,3-dione); ligand 2: 3,3'-(1,4-phenylene)bis(1-phenylpropane-1,3-dione)) were successfully synthesized. The two neutral catalysts all showed satisfactory activities in the cobalt-mediated radical polymerization (CMRP) of methyl methacrylate (MMA) with the common initiator of azodiisobutyronitrile (AIBN). The resulting polymerizations have all of the characteristics of a living polymerization and displayed linear semilogarithmic kinetic plots, a linear correlation between the number-average molecular weight and the monomer conversion, and low polydispersities. Mono- or dicomponent low polydispersity polymers could be obtained by using the two dinuclear catalysts under proper reaction conditions. All these improvements facilitate the implementation of the acrylate CMRP and open the door to the scale-up of the syntheses and applications of the multicomponent low polydispersity polymers.     

Free-radical polymerization of acrylamide by manganese peroxidase produced by the white-rot basidiomycete Bjerkandera adusta

Acrylamide was polymerized to give polyacrylamide using manganese peroxidase (MnP) produced by the basidiomycete Bjerkandera adusta. The molecular weight of the polymer synthesized by MnP was 155000, higher than those obtained with other reaction systems using horseradish peroxidase and a redox initiator. The ¹³C-NMR spectrum showed that polyacrylamide was atactic. Electron spin resonance analysis revealed that 2,4-pentanedione added as an initiator was first oxidized to generate a carbon-centered radical, which initiated radical additive polymerization of acrylamide.     

Substrate-independent approach for the generation of functional protein resistant surfaces

A new route for coating various substrates with antifouling polymer layers was developed. It consisted in deposition of an amino-rich adhesion layer by means of RF magnetron sputtering of Nylon 6,6 followed by the well-controlled, surface-initiated atom transfer radical polymerization of antifouling polymer brushes initiated by bromoisobutyrate covalently attached to amino groups present in the adhesion layer. Polymer brushes of hydroxy- and methoxy-capped oligoethyleneglycol methacrylate and carboxybetaine acrylamide were grafted from bromoisobutyrate initiator attached to a 15 nm thick amino-rich adhesion layer deposited on gold, silicon, polypropylene, and titanium-aluminum-vanadium alloy surfaces. Well-controlled polymerization kinetics made it possible to control the thickness of the brushes at a nanometer scale. Zero fouling from single protein solutions and a reduction of more than 90% in the fouling from blood plasma observed on the uncoated surfaces was achieved. The feasibility of functionalization with bioactive compounds was tested by covalent attachment of streptavidin onto poly(oligoethylene glycol methacrylate) brush and subsequent immobilization of model antibodies and oligonucleotides. The procedure is nondestructive and does not require any chemical preactivation or the presence of reactive groups on the substrate surface. Contrary to current antifouling modifications, the developed coating can be built on various classes of substrates and preserves its antifouling properties even in undiluted blood plasma. The new technique might be used for fabrication of biotechnological and biomedical devices with tailor-made functions that will not be impaired by fouling from ambient biological media.     

Isolation and detection of steroids from human urine by molecularly imprinted solid-phase extraction and liquid chromatography

Naturally occurring steroids such as progesterone, testosterone and 17β-estradiol were analyzed in this study. These bio-identical molecules paradoxically can be either beneficial or harmful. Unfortunately as growth promoters can be toxic and cancerogenic at elevated levels. Due to difficulty in monitoring at trace quantities of these hormones in biological matrices specific adsorption materials molecularly imprinted polymers (MIPs) were used for preconcentration and clean up in sample preparation step. A non-covalent imprinting approach was used for bulk polymerization of progesterone, testosterone and 17β-estradiol imprinted polymers. Synthesis of MIPs was achieved by thermal, UV and γ irradiation initiated polymerization whereby were used methacrylic acid (MAA), 4-vinylpyridine (4-VP) as functional monomers, ethylene glycol dimethacrylate (EDMA), trimethylolpropane trimethacrylate (TRIM) as cross-linking agents and acetonitrile, isooctane–toluene (1:99, v/v) and chloroform as porogen solvents. It was also used as initiator 2,2′-azobis(2-methylpropionitrile) (AIBN) or benzyl methyl ether (BME). The MIPs were applied as selective sorbents in solid-phase extraction (SPE). Molecularly imprinted solid-phase extraction (MISPE) considered as hyphenated technique were applied in extraction step before HPLC-DAD analysis of steroids from human urine.     

Synthesis and characterization of polymeric soybean oil-g-methyl methacrylate (and n-butyl methacrylate) graft copolymers: biocompatibility and bacterial adhesion

Peroxidation, epoxidation, and/or perepoxidation reactions of soybean oil under air at room temperature resulted in cross-linked polymeric soybean oil peroxides on the surface along with the waxy soluble part, sPSB, with a molecular weight of 4690, containing up to 2.3 wt % peroxide. This soluble polymeric oil peroxide, sPSB, initiated the free radical polymerization of either methyl methacrylate (MMA) or n-butyl methacrylate (nBMA) to give PSB-g-PMMA and PSB-g-PnBMA graft copolymers. The polymers obtained were characterized by (1)H NMR, thermogravimetric analysis, differential scanning calorimetry, and gel permeation chromatography techniques. Polymeric oil as a plasticizer lowered the glass transition of the PSB-g-PMMA graft copolymers. PSB-g-PMMA and PSB-g-PnBMA graft copolymer film samples were also used in cell culture studies. Fibroblast and macrophage cells were strongly adhered and spread on the copolymer film surfaces, which is important in tissue engineering. Bacterial adhesion on PSB-g-PMMA graft copolymer was also studied. Both Staphylococcus epidermidis and Escherichia coli adhered on the graft copolymer better than on homo-PMMA. Furthermore, the latter adhered much better than the former.     

Radical-scavenging activity of butylated hydroxytoluene (BHT) and its metabolites

To clarify the radical-scavenging activity of butylated hydroxytoluene (BHT), a food additive, stoichiometric factors (n) and inhibition rate constants (k_inh) were determined for 2,6-di-tert-butyl-4-methylphenol (BHT) and its metabolites 2,6-di-tert-butyl-p-benzoquinone (BHT-Q), 3,5-di-tert-butyl-4-hydroxybenzaldehyde (BHA-CHO) and 3,5-di-tert-butyl-4-hydroperoxy-4-methyl-2,5-cyclohexadiene-1-one (BHT-OOH). Values of n and k_inh were determined from differential scanning calorimetry (DSC) monitoring of the polymerization of methyl methacrylate (MMA) initiated by 2,2′-azobis(isobutyronitrile) (AIBN) or benzoyl peroxide (BPO) at 70 °C in the presence or absence of antioxidants (BHT-related compounds). The n values declined in the order BHT (1–2) > BHT-CHO, BHT-OOH (0.1–0.3) > BHT-Q (0). The n value for BHT with AIBN was approximately 1.0, suggesting dimerization of BHT. The k_inh values declined in the order BHT-Q ((3.5–4.6)×10⁴ M⁻¹ s⁻¹) > BHT-OOH (0.7–1.9×10⁴ M⁻¹ s⁻¹) > BHT-CHO ((0.4–1.7)×10⁴ M⁻¹ s⁻¹) > BHT ((0.1–0.2)×10⁴ M⁻¹ s⁻¹). The k_inh for metabolites was greater than that for the parent BHT. Growing MMA radicals initiated by BPO were suppressed much more efficiently by BHT or BHT-Q compared with those initiated by AIBN. BHT was effective as a chain-breaking antioxidant.     

Free radical copolymerization kinetics of γ-methyl-α-methylene-γ-butyrolactone (MeMBL)

The propagation kinetics and copolymerization behavior of the biorenewable monomer γ-methyl-α-methylene-γ-butyrolactone (MeMBL) are studied using the pulsed laser polymerization (PLP)/size exclusion chromatography (SEC) technique. The propagation rate coefficient for MeMBL is 15% higher than that of its structural analogue, methyl methacrylate (MMA), with a similar activation energy of 21.8 kJ·mol(-1). When compared to MMA, MeMBL is preferentially incorporated into copolymers when reacted with styrene (ST), MMA, and n-butyl acrylate (BA); the monomer reactivity ratios fit from bulk MeMBL/ST, MeMBL/MMA, and MeMBL/BA copolymerizations are r(MeMBL) = 0.80 ± 0.04 and r(ST) = 0.34 ± 0.04, r(MeMBL) = 3.0 ± 0.3 and r(MMA) = 0.33 ± 0.01, and r(MeMBL) = 7.0 ± 2.0 and r(BA) = 0.16 ± 0.03, respectively. In all cases, no significant variation with temperature was found between 50 and 90 °C. The implicit penultimate unit effect (IPUE) model was found to adequately fit the composition-averaged copolymerization propagation rate coefficient, k(p,cop), for the three systems.     

Methylated arsenic species in plants originate from soil microorganisms

? Inorganic arsenic (iAs) is a ubiquitous human carcinogen, and rice (Oryza sativa) is the main contributor to iAs in the diet. Methylated pentavalent As species are less toxic and are routinely found in plants; however, it is currently unknown whether plants are able to methylate As. ? Rice, tomato (Solanum lycopersicum) and red clover (Trifolium pratense) were exposed to iAs, monomethylarsonic acid (MMA(V)), or dimethylarsinic acid (DMA(V)), under axenic conditions. Rice seedlings were also grown in two soils under nonsterile flooded conditions, and rice plants exposed to arsenite or DMA(V) were grown to maturity in nonsterile hydroponic culture. Arsenic speciation in samples was determined by HPLC-ICP-MS. ? Methylated arsenicals were not found in the three plant species exposed to iAs under axenic conditions. Axenically grown rice was able to take up MMA(V) or DMA(V), and reduce MMA(V) to MMA(III) but not convert it to DMA(V). Methylated As was detected in the shoots of soil-grown rice, and in rice grain from nonsterile hydroponic culture. GeoChip analysis of microbial genes in a Bangladeshi paddy soil showed the presence of the microbial As methyltransferase gene arsM. ? Our results suggest that plants are unable to methylate iAs, and instead take up methylated As produced by microorganisms.     

Development of a simple embedding procedure allowing immunocytochemical localization at the ultrastructural level

Immunobed solution A is a water-soluble acrylic compound recently developed for immunocytochemical localization at the light microscopic level. In this study, we combined it with methyl methacrylate (MMA) to achieve sufficient hardness to obtain ultra-thin sections. Samples of platelets were dehydrated and embedded in the water-soluble acrylic mixture (WSAM). The embedding process was carried out at 4 degrees C and final polymerization was induced with either chemical (benzoyl peroxide) or physical (UV light) catalysts. Tubulin was localized at the ultrastructural level in sections embedded according to these two methods. Results were compared with those obtained in platelets processed in Lowicryl. Dehydration and embedding with the WSAM yielded a preservation of antigenicity similar to that obtained in Lowicryl. The new procedure benefits from the low temperature achieved during polymerization, providing good ultrastructural morphology and immunolocalization of protein antigens with the simplicity of a routine embedding procedure for light microscopy.     

Methacrylate Embedding and Sectioning of Calcified Bone

Twenty-five milliliter aliquots of ethyl-butyl (1:1) methacrylate were polymerized at 6 or 7 initiator concentrations using 3 polymerization temperatures, both in air and in a water bath. Duplicate series were polymerized with and without vibration, pre-polymerization, and exclusion of oxygen. Hardening times and maximum temperatures reached within the samples were recorded. Vibration and the exclusion of oxygen had no effect. Prepolymerization, increasing polymerization temperature and increasing initiator concentration all decreased the hardening time and increased the maximum temperature. Polymerizing in a water bath rather than in air reduced the maximum temperature by 25-40°C and lengthened the hardening time about 1 hr. An initiator concentration of 0.4% Luperco CDB in ethyl-butyl methacrylate and a water-bath temperature of 45°C were selected for tissue embedding. The hardening time was 8 hr and the maximum temperature during polymerization was about 60°C.

Split rat femora and tibiae were freeze-dried and vacuum-infiltrated with acetone, absolute alcohol or monomer. The acetone or alcohol-fixed specimens were subsequently infiltrated with monomer. The specimens were transferred to 1 oz bottles, prepolymerized syrup added, and polymerized. No consistent differences between specimens treated by these methods were noted. Five-micron serial sections could be cut using a Leitz sledge microtome with a modified knife if the block was coated with paraffin between sections.     

Infrared studies of stereoregularity of copoly(γ-benzyl-D,L-glutamate) by the polymerization of the N-carboxylic anhydride

The D and L copolymerizations of γ-benzyl glutamate N-carboxylic anhydride (NCA) were carried out by two different initiators, n-butylamine and sodium methoxide. The stereoregularity of the polymer was examined by infrared spectroscopy in the region 700–200 cm^?1. A remarkable difference was found between the polymers obtained by these initiators in the region 450–400 cm^?1. In the polymer obtained with sodium methoxide as initiator, the 409-cm^?1 peak assigned to local α-helical conformation was not greatly affected by the amount of the L -form, but in the polymer obtained by n-butylamine this peak was much affected by the variation of L -content. This indicates that the stereo-selectivity of the polymerization in the sodium methoxide initiated system is higher than that in the n-butylamine initiated system.