Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Purification and properties of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis><Emphasis Type="Italic">S</Emphasis>-adenosylmethionine synthetase expressed in recombinant <Emphasis Type="Italic">Pichia pastoris</Emphasis>

An intracellular S-adenosylmethionine synthetase (SAM-s) was purified from the fermentation broth of Pichia pastoris GS115 by a sequence chromatography column. It was purified to apparent homogeneity by (NH₄)₂SO₄ fractionation (30–60%), anion exchange, hydrophobic interaction, anion exchange and gel filtration chromatography. HPLC showed the purity of purified SAM-s was 91.2%. The enzyme was purified up to 49.5-fold with a final yield of 20.3%. The molecular weight of the homogeneous enzyme was 43.6 KDa, as determined by electro-spray ionization mass spectrometry (ESI-MS). Its isoelectric point was approximately 4.7, indicating an acidic character. The optimum pH and temperature for the enzyme reaction were 8.5 and 35 °C, respectively. The enzyme was stable at pH 7.0–9.0 and was easy to inactivate in acid solution (pH ≤ 5.0). The temperature stability was up to 45 °C. Metal ions, such as, Mn²⁺ and K⁺ at the concentration of 5 mM had a slight activation effect on the enzyme activity and the Mg²⁺ activated the enzyme significantly. The enzyme activity was strongly inhibited by heavy metal ions (Cu²⁺ and Ag²⁺) and EDTA. The purified enzyme from the transformed Pichia pastoris synthesized S-adenosylmethionine (SAM) from ATP and l-methionine in vitro with a K _m of 120 and 330 μM and V _max of 8.1 and 23.2 μmol/mg/min for l-methionine and ATP, respectively.     

Enhanced Soluble Expression of a Thermostable Cellulase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

In this study, the cellulase gene celD from Clostridium thermocellum was cloned into expression vectors pET-20b(+) and pHsh. While high expression can be achieved by means of both these expression systems, only the pHsh expression system gives soluble proteins. By weakening the mRNA secondary structure and replacing the rare codons for the N-terminal amino acids of the target protein, the expression level of CelD was increased from 4.1 ± 0.3 to 6.4 ± 0.4 U ml⁻¹ in LB medium. Recombinant CelD was purified by heat treatment followed by Ni–NTA affinity. The purified CelD exhibited the highest activity at pH 5.4 and 60°C, and retained more than 50% activity after incubation at 70°C for 1 h. The cellulase activity of CelD was significantly enhanced by Ca²⁺ but inhibited by EDTA. The favorable properties of CelD offer the potential for genetic modification of strains for biomass degradation. Presently, one of the major bottlenecks for industrial cellulase users is the high cost of enzyme production. The high level expression of soluble enzymes from the pHsh expression system offers a novel approach for the production of cellulases to be used in various agro-industrial processes such as chemical, food and textile.     

Optimization of protoplast yields from the red algae <Emphasis Type="Italic">Gracilaria dura</Emphasis> (C. Agardh) J. Agardh and G. <Emphasis Type="Italic">verrucosa</Emphasis> (Huds.) Papenfuss

This study reports on the optimization of protoplast yield from two important tropical agarophytes Gracilaria dura and Gracilaria verrucosa using different cell-wall-degrading enzymes obtained from commercial sources. The conditions for achieving the highest protoplast yield was investigated by optimizing key parameters such as enzyme combinations and their concentrations, duration of enzyme treatment, enzyme pH, mannitol concentration, and temperature. The significance of each key parameter was also further validated using the statistical central composite design. The enzyme composition with 4% cellulase Onozuka R-10, 2% macerozyme R-10, 0.5% pectolyase, and 100 U agarase, 0.4 M mannitol in seawater (30‰) adjusted to pH 7.5 produced the highest protoplast yields of 3.7 ± 0.7 × 10⁶ cells g⁻¹ fresh wt for G. dura and 1.2 ± 0.78 × 10⁶ cells g⁻¹ fresh wt for G. verrucosa when incubated at 25°C for 4–6 h duration. The young growing tips maximally released the protoplasts having a size of 7–15 μm in G. dura and 15–25 μm in G. verrucosa, mostly from epidermal and upper cortical regions. A few large-size protoplasts of 25–35 μm, presumably from cortical region, were also observed in G. verrucosa.     

Enhancement of polysaccharides production in <Emphasis Type="Italic">Ganoderma lucidum</Emphasis> by the addition of ethyl acetate extracts from <Emphasis Type="Italic">Eupolyphaga sinensis</Emphasis> and <Emphasis Type="Italic">Catharsius molossus</Emphasis>

To screen stimulators from Chinese medicinal insects for mycelial growth and polysaccharides production of Ganoderma lucidum, G. lucidum was inoculated into the media with and without supplementation of medicinal insect extracts. The ethyl acetate extract of Eupolyphaga sinensis at 55 mg l⁻¹ lead to significant increase in both biomass and intracellular polysaccharides (IPS) concentration from 8.53 ± 0.41 to 14.16 ± 0.43 and 1.28 ± 0.09 to 2.13 ± 0.11 g l⁻¹, respectively. In addition, the ethyl acetate extract of Catharsius molossus at 55 mg l⁻¹ significantly enhanced extracellular polysaccharides (EPS) production; the EPS yield increased from 350.9 ± 14.1 to 475.1 ± 15.3 mg l⁻¹. There were no new components in the two types of polysaccharides obtained by the addition of the insect extracts.     

Edible oil degradation by using yeast coculture of <Emphasis Type="Italic">Rhodotorula pacifica</Emphasis> ST3411 and <Emphasis Type="Italic">Cryptococcus laurentii</Emphasis> ST3412

To develop a microbial treatment of edible oil-contaminated wastewater, microorganisms capable of rapidly degrading edible oil were screened. The screening study yielded a yeast coculture comprising Rhodotorula pacifica strain ST3411 and Cryptococcus laurentii strain ST3412. The coculture was able to degrade efficiently even at low contents of nitrogen ([NH₄–N] = 240 mg/L) and phosphorus sources ([PO₄–P] = 90 mg/L). The 24-h degradation rate of 3,000 ppm mixed oils (salad oil/lard/beef tallow, 1:1 w/w) at 20°C was 39.8% ± 9.9% (means ± standard deviations of eight replicates). The highest degradation rate was observed at 20°C and pH 8. In a scaled-up experiment, the salad oil was rapidly degraded by the coculture from 671 ± 52.0 to 143 ± 96.7 ppm in 24 h, and the degradation rate was 79.4% ± 13.8% (means ± standard deviations of three replicates). In addition, a repetitive degradation was observed with the cell growth by only pH adjustment without addition of the cells.     

RETRACTED ARTICLE: Archaeal <Emphasis Type="Italic">amoA</Emphasis> Genes Outnumber Bacterial <Emphasis Type="Italic">amoA</Emphasis> Genes in Municipal Wastewater Treatment Plants in Bangkok

The contribution of ammonia-oxidizing archaea (AOA) to nitrogen removal in wastewater treatment plants (WWTPs) remains unknown. This study investigated the abundance of archaeal (AOA) and bacterial (ammonia-oxidizing bacteria (AOB)) amoA genes in eight of Bangkok’s municipal WWTPs. AOA amoA genes (3.28 × 10⁷ ± 1.74 × 10⁷–2.23 × 10¹¹ ± 1.92 × 10¹¹ copies l⁻¹ sludge) outnumbered AOB amoA genes in most of the WWTPs even though the plants’ treatment processes, influent and effluent characteristics, removal efficiencies, and operation varied. An estimation of the ammonia-oxidizing activity of AOA and AOB suggests that AOA involved in autotrophic ammonia oxidation in the WWTPs. Statistical analysis shows that the numbers of AOA amoA genes correlated negatively to the ammonium levels in effluent wastewater, while no correlation was found between the AOA amoA gene numbers and the oxygen concentrations in aeration tanks. An analysis of the AOB sequences shows that AOB found in the WWTPs limited to only two AOB clusters which exhibit high or moderate affinity to ammonia. In contrast to AOB, AOA sequences of various clusters were retrieved, and they were previously recovered from a variety of environments, such as thermal and marine environments.     

Permeabilization of <Emphasis Type="Italic">Microbacterium oxylans</Emphasis> shifts the conversion of puerarin from puerarin-7-<Emphasis Type="Italic">O</Emphasis>-glucoside to puerarin-7-<Emphasis Type="Italic">O</Emphasis>-fructoside

The main product of the conversion of puerarin by unpermeabilized cells of bacterium Microbacterium oxydans CGMCC 1788 was puerarin-7-O-glucoside (241 ± 31.9 μM). Permeabilization with 40% ethanol could not increase conversion yield, whereas it resulted in change of main product; a previous trace product became a main product (213 ± 48.0 μM) which was identified as a novel puerarin-7-O-fructoside by electrospray ionization time-of-flight MS, ¹³C NMR, ¹H NMR, and GC-MS analysis of sugar composition, and puerarin-7-O-glucoside became a trace product (14.8 ± 5.4 μM). However, the extract from cells of M. oxydans CGMCC 1788 permeabilized with ethanol converted puerarin to form 113.9 ± 27.7 μM puerarin-7-O-glucoside and 187.8 ± 29.5 μM puerarin-7-O-fructoside under the same conditions. When unpermeabilized intact cells were recovered and used repeatedly for the conversion of puerarin, with increase of reuse times, the yield of puerarin-7-O-glucoside gradually decreased, whereas the yield of puerarin-7-O-fructoside increased gradually in the conversion mixture. The main product of the conversion of puerarin by the tenth recycled unpremerbilized cells was puerarin-7-O-fructoside (288.4 ± 24.0 μM). Therefore, the change of permeability of cell membrane of bacterium M. oxydans CGMCC 1788 contributed to the change of conversion of the product’s composition.     

A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

The tyrosine <Emphasis Type="Italic">O</Emphasis>-prenyltransferase SirD catalyzes <Emphasis Type="Italic">O</Emphasis>-, <Emphasis Type="Italic">N</Emphasis>-, and <Emphasis Type="Italic">C</Emphasis>-prenylations

Recently, the prenyltransferase SirD was found to be responsible for the O-prenylation of tyrosine in the biosynthesis of sirodesmin PL in Leptosphaeria maculans. In this study, the behavior of SirD towards phenylalanine/tyrosine and tryptophan derivatives was investigated. Product formation has been observed with 12 of 19 phenylalanine/tyrosine derivatives. It was shown that the alanine structure attached to the benzene ring and an electron donor, e.g., OH or NH₂, at its para-position are essential for the enzyme activity. Modifications were possible both at the side chain and the benzene ring. Enzyme products from seven phenylalanine/tyrosine derivatives were isolated and characterized by MS and NMR analyses including HSQC and HMBC and proven to be O- or N-prenylated derivatives at position C4 of the benzene rings. K _M values of six selected derivatives were found in the range of 0.10–0.68 mM. Catalytic efficiencies (K _cat/K _M ) were determined in the range of 430–1,110 s⁻¹·M⁻¹ with l-tyrosine as the best substrate. In addition, 7 of 14 tested tryptophan analogs were also accepted by SirD and converted to C7-prenylated derivatives, which was confirmed by comparison with products obtained from enzyme assays using a 7-dimethylallyltryptophan synthase 7-DMATS from Aspergillus fumigatus.     

Biotechnological production of <Emphasis Type="SmallCaps">l</Emphasis>-ribose from <Emphasis Type="SmallCaps">l</Emphasis>-arabinose

l-Ribose is a rare and expensive sugar that can be used as a precursor for the production of l-nucleoside analogues, which are used as antiviral drugs. In this work, we describe a novel way of producing l-ribose from the readily available raw material l-arabinose. This was achieved by introducing l-ribose isomerase activity into l-ribulokinase-deficient Escherichia coli UP1110 and Lactobacillus plantarum BPT197 strains. The process for l-ribose production by resting cells was investigated. The initial l-ribose production rates at 39°C and pH 8 were 0.46 ± 0.01 g g⁻¹ h⁻¹ (1.84 ± 0.03 g l⁻¹ h⁻¹) and 0.27 ± 0.01 g g⁻¹ h⁻¹ (1.91 ± 0.1 g l⁻¹ h⁻¹) for E. coli and for L. plantarum, respectively. Conversions were around 20% at their highest in the experiments. Also partially purified protein precipitates having both l-arabinose isomerase and l-ribose isomerase activity were successfully used for converting l-arabinose to l-ribose.     

Efficient separation and purification of allophycocyanin from <Emphasis Type="Italic">Spirulina</Emphasis> (<Emphasis Type="Italic">Arthrospira</Emphasis>) <Emphasis Type="Italic">platensis</Emphasis>

Allophycocyanin (APC) is a minor component of phycobiliproteins in cyanobacteria and red algae. This paper describes a simple and inexpensive extracting method for isolating APC from Spirulina (Arthrospira) platensis with high efficiency. The crude phycobiliprotein extract was pretreated by ammonium sulfate fractionation. Then, by adding hydroxylapatite into crude phycobiliprotein extract dissolved in 20 mM phosphate buffer (pH 7.0), APC was selectively adsorbed by hydroxylapatite but C-phycocyanin (C-PC) was not. The hydroxylapatite was collected and APC was extracted from the crude phycobiliprotein extract. Then, the enriched APC was washed off from the hydroxylapatite using 100 mM phosphate buffer (pH 7.0). In this simple extracting method it was easy to remove C-PC and isolate APC in large amounts. The absorbance ratio A ₆₅₀/A ₂₈₀ of extracted APC reached 2.0. The recovery yield was 70%, representing 4.61 mg · g⁻¹ wet weight. The extracted APC could be further purified by a simple anion-exchange chromatography with a pH gradient from 5.6 to 4.0. The absorbance ratio A ₆₅₀/A ₂₈₀ of the purified APC reached 5.0, and the overall recovery yield was 43%, representing 2.83 mg · g⁻¹ wet weight. Its purity was confirmed by native polyacrylamide gel electrophoresis (PAGE) and sodium dodecyl sulfate-PAGE.     

The ATPase activity of the <Emphasis Type="Italic">G2alt</Emphasis> gene encoding an aluminium tolerance protein from <Emphasis Type="Italic">Anoxybacillus gonensis</Emphasis> G2

The G2ALT gene was cloned and sequenced from the thermophilic bacterium Anoxybacillus gonensis G2. The gene is 666 bp long and encodes a protein 221 amino acids in length. The gene was overexpressed in E. coli and purified to homogeneity and biochemically characterized. The enzyme has a molecular mass of 24.5 kDa and it could be classified as a member of the family of bacterial aluminium resistance proteins based on homology searches. When this fragment was expressed in E. coli, it endowed E. coli with Al tolerance to 500 μM. The purified G2ALT protein is active at a broad pH range (pH 4.0–10.0) and temperature range (25°C–80°C) with optima of 6.0 and the apparent optimal temperature of 73°C respectively. Under optimal conditions, G2ALT exhibited a low ATPase activity with K _m ⁻ and V _max ⁻ values of 10±0.55 μM and 26.81±0.13 mg Pi released/min/mg enzyme, respectively. The ATPase activity of G2ALT requires Mg²⁺ and Na⁺ ions, while Zn²⁺ and Al³⁺ stimulate the activity. Cd²⁺ and Ag⁺ reduced the activity and Li⁺, Cu²⁺, and Co²⁺ inhibited the activity. Known inhibitors of most ATPases, like such as β-mercaptoethanol and ouabain, also inhibited the activity of the G2ALT. These biochemical characterizations suggested that G2ALT belongs to the PP-loop ATPase superfamily and it can be responsible for aluminium tolerance in A. gonensis G2.     

Characterization of an extracellular alkaline serine protease from marine <Emphasis Type="Italic">Engyodontium album</Emphasis> BTMFS10

An alkaline protease from marine Engyodontium album was characterized for its physicochemical properties towards evaluation of its suitability for potential industrial applications. Molecular mass of the enzyme by matrix-assisted laser desorption ionization-mass spectrometry (MALDI-MS) analysis was calculated as 28.6 kDa. Isoelectric focusing yielded pI of 3–4. Enzyme inhibition by phenylmethylsulfonyl fluoride (PMSF) and aprotinin confirmed the serine protease nature of the enzyme. K _m, V _max, and K _cat of the enzyme were 4.727 × 10⁻² mg/ml, 394.68 U, and 4.2175 × 10⁻² s⁻¹, respectively. Enzyme was noted to be active over a broad range of pH (6–12) and temperature (15–65°C), with maximum activity at pH 11 and 60°C. CaCl₂ (1 mM), starch (1%), and sucrose (1%) imparted thermal stability at 65°C. Hg²⁺, Cu²⁺, Fe³⁺, Zn²⁺, Cd⁺, and Al³⁺ inhibited enzyme activity, while 1 mM Co²⁺ enhanced enzyme activity. Reducing agents enhanced enzyme activity at lower concentrations. The enzyme showed considerable storage stability, and retained its activity in the presence of hydrocarbons, natural oils, surfactants, and most of the organic solvents tested. Results indicate that the marine protease holds potential for use in the detergent industry and for varied applications.     

Characterization of alcohol dehydrogenase 1 and 3 from <Emphasis Type="Italic">Neurospora crassa</Emphasis> FGSC2489

Alcohol dehydrogenase (ADH) is a key enzyme in the production and utilization of alcohols. Some also catalyze the formation of carboxylate esters from alcohols and aldehydes. The ADH1 and ADH3 genes of Neurospora crassa FGSC2489 were cloned and expressed in recombinant Escherichia coli to investigate their alcohol dehydrogenation and carboxylate ester formation abilities. Homology analysis and sequence alignment of amino acid sequence indicated that ADH1 and ADH3 of N. crassa contained a zinc-binding consensus sequence and a NAD⁺-binding motif and showed 54–75% identity with fungi ADHs. N. crassa ADH1 was expressed in E. coli to give a specific activity of 289 ± 9 mU/mg using ethanol and NAD⁺ as substrate and cofactor, respectively. Corresponding experiments on the expression and activity of ADH3 gave 4 mU/mg of specific activity. N. crassa ADH1 preferred primary alcohols containing C3–C8 carbons to secondary alcohols such as 2-propanol and 2-butanol. N. crassa ADH1 possessed 5.3 mU/mg of specific carboxylate ester-forming activity accumulating 0.4 mM of ethyl acetate in 18 h. Substrate specificity of various linear alcohols and aldehydes indicated that short chain-length alcohols and aldehydes were good substrates for carboxylate ester production. N. crassa ADH1 was a primary alcohol dehydrogenase using cofactor NAD⁺ preferably and possessed carboxylate ester-forming activity with short chain alcohols and aldehydes.     

Production and regeneration of protoplasts from <Emphasis Type="Italic">Grateloupia turuturu</Emphasis> Yamada (Rhodophyta)

Protoplasts were isolated enzymatically from the carrageenophyte red alga Grateloupia turuturu (Halymeniales, Rhodophyta) that occurs along the coast of the French Channel in Normandy. Effects of the main factors on the protoplast yield were identified to improve the isolation protocol. The optimal enzyme composition for cell wall digestion and protoplast viability consisted of 2% cellulase Onozuka R-10, 0.5% macerozyme R-10, 2% crude extract from viscera of Haliotis tuberculata, 0.8 M mannitol, 20 mM sodium citrate, 0.3% bovine serum albumin at 25°C, and 4-h incubation period. The protoplasts were approximately 5–15 μm in diameter, liberated mainly from the surface cell layers. Maximum yield was 1.5 × 10⁷ protoplasts g^-1 fresh tissue. The protoplasts underwent initial division after 14 days with a high density level of 1 × 10⁶ cells mL^-1 in culture medium and developed into microthalli of a line of two to six cells.     

Characterization of ribose-5-phosphate isomerase of <Emphasis Type="Italic">Clostridium thermocellum</Emphasis> producing <Emphasis Type="SmallCaps">d</Emphasis>-allose from <Emphasis Type="SmallCaps">d</Emphasis>-psicose

The rpiB gene, encoding ribose-5-phosphate isomerase (RpiB) from Clostridium thermocellum, was cloned and expressed in Escherichia coli. RpiB converted d-psicose into d-allose but it did not convert d-xylose, l-rhamnose, d-altrose or d-galactose. The production of d-allose by RpiB was maximal at pH 7.5 and 65°C for 30 min. The half-lives of the enzyme at 50°C and 65°C were 96 h and 4.7 h, respectively. Under stable conditions of pH 7.5 and 50°C, 165 g d-allose l⁻¹ was produced without by-products from 500 g d-psicose l⁻¹ after 6 h.     

Antioxidant Properties of Selected <Emphasis Type="Italic">Boletus</Emphasis> Mushrooms

Considering the growing interest for mushrooms and the demand search of natural antioxidants sources, the aim of this study was to investigate the antioxidant properties of two edible widely used Boletus species, Boletus edulis, and Boletus auranticus, collected from Istra region in Croatia in late summer 2007. To evaluate the antioxidant properties and content of antioxidant compounds, scavenging capacity on DPPH˙, OH˙, and O₂˙⁻ radicals, reducing power and capacity to inhibit lipid peroxidation has been investigated. It is determined that content of total phenols (41.82 ± 0.08 mg gallic acid equivalent per gram of dry extract) was higher for B. edulis. Using high performance liquid chromatography/diode array detector analysis, the main antioxidant compound, variegatic acid, has been detected and quantified. 1,1-Diphenyl-2-picryl-hydrazyl-hydrate assay was used as a preliminary free radical–scavenging evaluation. By this assay, it has been found that B. edulis dry mushroom extract exhibits 50% of inhibition value at the extract concentration of 0.016 ± 0.0003 mg/ml. The extracts were capable of reducing iron(III) and, thus, are capable of donating electrons. Using electron paramagnetic resonance spin-trapping and spin-probing techniques, activity against relevant reactive species, ˙OH and O₂˙⁻ radical, was analyzed for both mushroom extracts. Both investigated extracts are determined as good inhibitors for ˙OH radical reduction, and both exhibited significant capacity for scavenging O₂˙⁻ radical and for that could help to prevent or meliorate oxidative damage. Only B. edulis extract prevents lipid peroxidation. Investigated mushroom extracts could represent easily accessible natural antioxidant resource.     

Bioactive metabolites from <Emphasis Type="Italic">Phoma</Emphasis> species,an endophytic fungus from the Chinese medicinal plant <Emphasis Type="Italic">Arisaema erubescens</Emphasis>

Through bioassay-guided fractionation, the EtOAc extract of a culture broth of the endophytic fungus Phoma species ZJWCF006 in Arisaema erubescens afforded a new α-tetralone derivative, (3S)-3,6,7-trihydroxy-α-tetralone (1), together with cercosporamide (2), β-sitosterol (3), and trichodermin (4). The structures of compounds were established on the basis of spectroscopic analyses. Compounds 1, 2, and 3 were obtained from Phoma species for the first time. Additionally, the compounds were subjected to bioactivity assays, including antimicrobial activity, against four plant pathogenic fungi (Fusarium oxysporium, Rhizoctonia solani, Colletotrichum gloeosporioides, and Magnaporthe oryzae) and two plant pathogenic bacteria (Xanthomonas campestris and Xanthomonas oryzae), as well as in vitro antitumor activities against HT-29, SMMC-772, MCF-7, HL-60, MGC80-3, and P388 cell lines. Compound 1 showed growth inhibition against F. oxysporium and R. solani with EC₅₀ values of 413.22 and 48.5 μg/mL, respectively. Additionally, compound 1 showed no cytotoxicity, whereas compound 2 exhibited cytotoxic activity against the six tumor cell lines tested, with IC₅₀ values of 9.3 ± 2.8, 27.87 ± 1.78, 48.79 ± 2.56, 37.57 ± 1.65, 27.83 ± 0.48, and 30.37 ± 0.28 μM, respectively. We conclude that endophytic Phoma are promising sources of natural bioactive and novel metabolites.     

Preparation and <Emphasis Type="Italic">In Vitro</Emphasis>/<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Microparticle Formulations Containing Meloxicam

In this study, we have formulated chitosan-coated sodium alginate microparticles containing meloxicam (MLX) and aimed to investigate the correlation between in vitro release and in vivo absorbed percentages of meloxicam. The microparticle formulations were prepared by orifice ionic gelation method with two different sodium alginate concentrations, as 1% and 2% (w/v), in order to provide different release rates. Additionally, an oral solution containing 15 mg of meloxicam was administered as the reference solution for evaluation of in vitro/in vivo correlation (ivivc). Following in vitro characterization, plasma levels of MLX and pharmacokinetic parameters [elimination half-life (t _1/2), maximum plasma concentration (C _max), time for C _max (t _max)] after oral administration to New Zealand rabbits were determined. Area under plasma concentration–time curve (AUC_0–∞) was calculated by using trapezoidal method. A linear regression was investigated between released% (in vitro) and absorbed% (in vivo) with a model-independent deconvolution approach. As a result, increase in sodium alginate content lengthened in vitro release time and in vivo t _max value. In addition, for ivivc, linear regression equations with r ² values of 0.8563 and 0.9402 were obtained for microparticles containing 1% and 2% (w/v) sodium alginate, respectively. Lower prediction error for 2% sodium alginate formulations (7.419 ± 4.068) compared to 1% sodium alginate formulations (9.458 ± 5.106) indicated a more precise ivivc for 2% sodium alginate formulation.